Even though Northstart platform support is well upstreamed it may always
happen that some kernel change affects/breaks something. It's a good
practice to specify fixed versions for kernel & Linux headers.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There is now support in both upstream U-Boot and upstream Linux.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Tested-by: Sergey Kuzminov <kuzminov.sergey81@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
imxrt1050-evk was using uImage switch to using zImage
now.
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump Linux to 6.7 and U-Boot to 2024.01
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Those components are aligned with NXP BSP lf-5.15.71-2.2.0.
This commit introduces arm-trusted-firmware upstream patches to
compile the needed version with newer gcc and binutils.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/5083366622
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Starting with kernel release v6.5 ARM DTS files are placed in vendor
subdirectories (Linux commit 724ba6751532 ("ARM: dts: Move .dts files to
vendor sub-directories")).
This fixes:
make[3]: *** No rule to make target 'arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dtb'. Stop.
make[2]: *** [Makefile:1384: bcm4708-smartrg-sr400ac.dtb] Error 2
make[3]: *** No rule to make target 'arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dtb'. Stop.
make[2]: *** [Makefile:1384: bcm47094-luxul-xwr-3150-v1.dtb] Error 2
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This defconfig enables edk2 UEFI shell and grub2 riscv64-efi boot
of a Linux Kernel.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Those components are aligned with NXP BSP lf-5.15.71-2.2.0.
This commit introduces arm-trusted-firmware upstream patches to
compile the needed version with newer gcc and binutils.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/5083366606
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The linux defconfig 'bb.org_defconfig' is the best for beagleboard.
To load compressed kernel modules, kmod and xz packages are needed
because busybox doesn't support it.
Bump U-Boot to version 2023.10. The uboot-tools package is no need.
Tested on beaglebone black.
[1] https://github.com/beagleboard/linux/releases/tag/6.1.46-ti-r13
Signed-off-by: Scott Fan <fancp2007@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit d344ffe624 (configs/rock5b: add hash for custom uboot)
explicitly noted that the kernel was retrieved from a git-clone, so the
sha1 of the commit was enough to get what we expect.
However, that does not account for the fact that the upstream repository
can disapear or be temporarily unavailable (maliciously or not). In that
case, the kernel archive will be looked up on the backup mirror.
In that case, the download is via wget over https, which protects the
transport, but does not guarantee that the remote server serves the
expected archive.
The hash file was dropped when d344ffe624 was applied; restore it.
Since the defconfig now has hashes for all its downloads, enforce
checking hashes.
Signed-off-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch adds support for Xilinx Kria KD240 starter kit.
KD240 features can be found here:
https://www.xilinx.com/products/som/kria/kd240-drives-starter-kit.html
While the Kria SOM is based on a ZynqMP SoC, there are some key
boot config differences from the other ZynqMP evaluation boards.
1. There are no boot switches on Kria SOMs. The boot mode is thus
hard configured for QSPI flash. A pre-programmed boot.bin comes
with every Starter Kit. U-Boot can then find the Linux kernel and
file system on the SD card.
Optional instructions for updating the boot.bin in the QSPI flash
can be found in the readme.txt file and the link below.
https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1641152513/Kria+K26+SOM
2. Kria SOMs use UART1 for the console instead of UART0. For this
reason, Kria Starter Kits will use a separate extlinux.conf file
from other ZynqMP evaluation boards.
3. The KD240 has a USB to SD card bridge, so the Linux kernel
and file system are found on /dev/sda1 and /dev/sda2.
4. The following patches have been submitted upstream to u-boot.
Without these patches, the usb, sd card and ethernet peripherals
do not work correctly.
https://patchwork.ozlabs.org/project/uboot/patch/20231213134007.2818069-1-neal.frager@amd.com/https://patchwork.ozlabs.org/project/uboot/patch/20231213134052.2818879-1-neal.frager@amd.com/
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
[Peter: add upstream tag, drop patch numbering from patches]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for ZynqMP ZCU104 evaluation board.
ZCU104 features can be found here:
https://www.xilinx.com/products/boards-and-kits/zcu104.html
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Let's also enable NXP firmware package to let latest SDMA firmware to be
loaded. To achieve this we also need to enable dynamic eudev to let it to
load the firmware as it is requested early before the rootfs is mounted.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Peter: explain why eudev is needed]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Let's also enable NXP firmware package to let latest SDMA firmware to be
loaded. To achieve this we also need to enable dynamic eudev to let it
load the firmware as it is requested early before the rootfs is mounted.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
[Peter: explain why eudev is needed]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The zynq_qmtech_defconfig has not been maintained for 3 years, and is now
using a very out of date u-boot and Linux kernel. Since there are 4 other
zynq7000 defconfigs available in buildroot and Julien no longer has a
functional board, drop the defconfig.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Acked-by: Julien Olivain <ju.o@free.fr>
[Peter: reword commit message]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the versal_vck190_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30 with additional bug fixes
- U-Boot v2023.01 with additional bug fixes
- ATF v2.8 with additional bug fixes
- PLM xilinx_v2023.2
- PSMFW xilinx_v2023.2
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynqmp_kria_kv260_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30 with additional bug fixes
- U-Boot v2023.01 with additional bug fixes
- ATF v2.8 with additional bug fixes
- PMUFW xilinx_v2023.2
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynqmp_zcu106_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30 with additional bug fixes
- U-Boot v2023.01 with additional bug fixes
- ATF v2.8 with additional bug fixes
- PMUFW xilinx_v2023.2
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the zynqmp_zcu102_defconfig to xilinx-v2023.2 which includes
the following updates:
- Linux v6.1.30 with additional bug fixes
- U-Boot v2023.01 with additional bug fixes
- ATF v2.8 with additional bug fixes
- PMUFW xilinx_v2023.2
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for Xilinx Kria KR260 starter kit.
KR260 features can be found here:
https://www.xilinx.com/products/som/kria/kr260-robotics-starter-kit.html
While the Kria SOM is based on a ZynqMP SoC, there are some key
boot config differences from the other ZynqMP evaluation boards.
1. There are no boot switches on Kria SOMs. The boot mode is thus
hard configured for QSPI flash. A pre-programmed boot.bin comes
with every Starter Kit. U-Boot can then find the Linux kernel and
file system on the SD card.
Optional instructions for updating the boot.bin in the QSPI flash
can be found in the readme.txt file and the link below.
https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1641152513/Kria+K26+SOM
2. Kria SOMs use UART1 for the console instead of UART0. For this
reason, Kria Starter Kits will use a separate extlinux.conf file
from other ZynqMP evaluation boards.
3. The KR260 has a USB to SD card bridge, so the Linux kernel
and file system are found on /dev/sda1 and /dev/sda2.
Signed-off-by: Neal Frager <neal.frager@amd.com>
[Peter: fix kr260.sh shellcheck warnings, similar to kv260.sh]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the latest
U-Boot 2023.10 and ATF 2.9. Increase ext2 partition size to fit
new versions.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the
latest U-Boot 2023.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the
latest U-Boot 2023.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the
latest U-Boot 2023.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to the new Linux LTS release 6.6.3. Switch to the
latest U-Boot 2023.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The defconfig fetches Linux and U-Boot from a git repo using the
unauthenticated git:// protocol, so add download hashes for them to ensure
we get the right sources by adding a global patch dir and running
utils/add-custom-hashes.
The defconfig uses the Linux sources for the kernel headers, so make
linux-headers/linux-headers.hash a symlink to linux/linux.hash so the same
hash file is used.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Linux 6.1 has been marked LTS for a long time now. Time to bump
Linux for RaspberryPi's to the latest 6.1.61 Since April 2022
the RaspberryPi defconfigs have compressed kernel module enabled
by default. (see [1] and [2]).
To load compressed kernel modules kmod and xz packages are needed
because busybox doesn't support it.
For testing I used RaspberryPi 2, 3(32+64bit) and 4(32+64bit), all with mdev enabled.
[1] c45b4223a4
[2] https://github.com/raspberrypi/linux/issues/4966
Signed-off-by: Bram Oosterhuis <dev@bybram.com>
Reviewed-by: Marcus Hoffmann <marcus.hoffmann@othermo.de>
Tested-by: Marcus Hoffmann <marcus.hoffmann@othermo.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
U-Boot requires pylibfdt, pyelftools and openssl so let's enable U-Boot
corresponding BR2_TARGET_UBOOT_NEEDS_*.
Rootfs is not big enough because of Linux modules size so let's extend it
to 120MB.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/5551322041
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch adds support for Xilinx Zynq ZC702 starter kit.
ZC702 features can be found here:
https://www.xilinx.com/products/boards-and-kits/ek-z7-zc702-g.html
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump version of Linux to 6.1.61 and U-Boot to 2023.10.
U-Boot requires enabling pylibfdt and pyelftools
We need to increase the size of the rootfs, and we get rid of a
64bit warning on `mke2fs` by passing `-O 64bit` as an argument.
Signed-off-by: Roberto Medina <robertoxmed@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 27bf08e4ad (configs/avenger96_defconfig: bump ATF version to 2.9
for binutils 2.39+ support) bumped TF-A, but it unfortunately does not boot
and instead dies with a panic:
NOTICE: CPU: STM32MP157AAC Rev.B
NOTICE: Model: Arrow Electronics STM32MP157A Avenger96 board
ERROR: nvmem node board_id not found
INFO: PMIC version = 0x10
ERROR: Product_below_2v5=1:
ERROR: HSLVEN update is destructive,
ERROR: no update as VDD > 2.7V
PANIC at PC : 0x2fff086f
Exception mode=0x00000016 at: 0x2fff086f
Instead use v2.5 to match the other stm32mp1 boards and use the same E=0
-Werror workaround. The avenger95 support is unfortunately broken since
v2.3 with the introduction of authentication support, so add a patch to the
DTS to fix that.
Notice that the authentication support was reworked in v2.7 so it is skipped
for the mp157a variant used on the avenger96, so the patch is not upstreamable.
While we're at it, also drop the debug option for consistency with the other
boards.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit f20589cbc7 (configs/stm32mp157c_odyssey: new defconfig) forgot to
specify a fixed TF-A version, so do that now.
When the defconfig was added, the default version was v2.5 - So use that.
Similarly to the other stm32mp1 defconfigs, this needs disabling -Werror
with E=0 to fix a build issue with GCC >= 12.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With the move to default to GCC 12 in commit e0091e42ee (package/gcc:
switch to gcc 12.x as the default), TF-A now fails to build as a warning is
generated and it builds with -Werror:
CC plat/st/stm32mp1/bl2_plat_setup.c
drivers/st/io/io_stm32image.c: In function ‘stm32image_partition_read’:
drivers/st/io/io_stm32image.c:249:13: error: ‘result’ may be used uninitialized [-Werror=maybe-uninitialized]
249 | int result;
| ^~~~~~
cc1: all warnings being treated as errors
This is fixed in TF-A v2.6 with commit c1d732d0db24 (fix(io_stm32image):
uninitialized variable warning), but I do not have the board to verify if
v2.6 works, so instead disable -Werror by passsing E=0.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With the move to default to GCC 12 in commit e0091e42ee (package/gcc:
switch to gcc 12.x as the default), TF-A now fails to build as a warning is
generated and it builds with -Werror:
CC plat/st/stm32mp1/bl2_plat_setup.c
drivers/st/io/io_stm32image.c: In function ‘stm32image_partition_read’:
drivers/st/io/io_stm32image.c:249:13: error: ‘result’ may be used uninitialized [-Werror=maybe-uninitialized]
249 | int result;
| ^~~~~~
cc1: all warnings being treated as errors
This is fixed in TF-A v2.6 with commit c1d732d0db24 (fix(io_stm32image):
uninitialized variable warning), but I do not have the board to verify if
v2.6 works, so instead disable -Werror by passsing E=0.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to 2023.10 and kernel to version 6.6.
There was a change in the location of the devicetrees for arm32
platforms, so adjust it accordingly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While switching bump Linux version to 6.1.57 and U-Boot version to
2023.10.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While switching bump Linux version to 6.1.57 and U-Boot version to
2023.10.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Also, since with Linux commit [1] it's been defined the mmc* order
making sd-card number to be 1 instead of 0. This prevent to boot from
mmc0 with Linux version 5.10+ so let's change mmcblk0p4 to mmcblk1p4 in
extlinux.conf in order to boot since we bump to Linux 6.5.7
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0011c6d182774fc781fb9e115ebe8baa356029ae
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Build is failing with an unrecognised opcode error due to missing
`zicsr` extension requirement. This is introduced with GCC version 12.
When binutils was updated to v2.38 they updated to the default ISA spec
version 20191213. In this version the original i extension split into i,
Zicsr and Zifencei. A fix for this has been added since U-Boot version
2022.01 to detect new Zicsr and Zifencei extensions and enable it when needed
therefore, an updated U-Boot tag to our latest 2023.09 release will fix
this as in our latest release we have updated to U-Boot version 2023.07.
Update the kernel verion in line with the U-Boot release version to
ensure compatiblities and latest features and fixes are included.
Remove riscv_g selection as it is now selected by default.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 72c653367d (board/licheepi_zero: move board files to their own
directory) forgot to rename the defconfig file, even though the
readme.txt was updated.
Do the rename now.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add support for the LicheePi Nano with mainline components:
- U-Boot 2023.04
- Linux 6.5.9
Board homepage and more usable WiKi:
- https://wiki.sipeed.com/hardware/en/lichee/Nano/Nano.html
- https://linux-sunxi.org/LicheePi_Nano
linux.fragment is required to disable some features in order to keep the
kernel size small, otherwise the board does not boot due to limited
memory. See note in readme.txt.
Signed-off-by: Francois Dugast <francois.dugast.foss@gmail.com>
[yann.morin.1998@free.fr:
- use fixed kernel version
- use manufacturer directory
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Group files for board licheepi_zero under the existing manufacturer
directory, like all the other boards by Sipeed.
Signed-off-by: Francois Dugast <francois.dugast.foss@gmail.com>
[yann.morin.1998@free.fr: use the manufacturer sub-dir]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
