Bump U-Boot to version 2023.04 and remove the patch that has already
been upstreamed.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
The version of U-Boot must be explicitly set because if you keep the
default setting, the bootloader is continuously updated in buildroot with
the risk of building a non-working image.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Bump U-Boot to version 2023.04.
Tested on beaglebone black.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Linux Kernel 6.1 now being officially promoted to be a LTS, this
commit bump the kernel version of this defconfig to 6.1.14.
A Kernel config fragment "linux.fragment" is now needed as the kernel
no longer enable SBI v0.1 support and the earlycon RISC-V SBI in its
riscv arch defconfig. See [1] [2].
The Spike riscv-isa-sim was updated upstream accordingly [3].
In order to keep a smooth transition, this kernel config fragment
re-enable those options to make sure this kernel will work with
both old Spike versions (not including commit [3] like the v1.1.0
currently included in Buildroot), and newer versions. This commit
was also successfully tested with riscv-isa-sim at commit
0d1a48c0c0.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=6f562570b9c5d6a3e30d87aec60a9d8f22a3203c
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=3938d5a2f9369d1ebd56320629fed395ce327e9c
[3] 191634d285
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump Linux kernel to v6.1.13 and increase the rootfs size accordingly.
- Bump the FVP in the readme to version 11.20 build 15 and update the
command line.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump Linux kernel version to 6.1.12.
- Bump U-Boot version to 2023.01 and rename config fragment to make it
clearer that it is not a complete config file.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump Linux kernel version to 6.1.12.
- Bump U-Boot version to 2023.01 and follow CONFIG_SYS_TEXT_BASE renaming.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Let's also enable BR2_TARGET_UBOOT_NEEDS_OPENSSL required by uboot to
build correctly.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Let's also reorder BR2_UBOOT_ options by moving
BR2_TARGET_UBOOT_FORMAT_DTB_IMX after BR2_TARGET_UBOOT_NEEDS_OPENSSL since
this reflects the order in boot/uboot/Config.in file.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The size of xipImage has grown by 84KB but there are still 278KB left
before running out of 2MB of flash memory.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
During the last U-boot version bump it's not been noted that the TPL
was not prepended to SPL anymore preventing the board to boot, so
let's copy TPL to the image folder, prepend it to u-boot-spl-dtb.bin
and place it at offset 32KB, where RK3288 bootrom expects to find
it. Let's also place u-boot-dtb separated from SPL at offset 8M, where
the SPL expects it to find it.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Migrate versal-firmware package from nealfrager github to Xilinx github.
The images are identical, so this patch has zero impact on functionality.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Starting from version 2021.10 only distro booting is supported, as
reported by commit ff8f277e9121 ("ti: am335x_evm: Switch to DISTRO_BOOT only").
The patch allows to update U-Boot to versions later than 2021.10.
Tested on beaglebone black.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The previous version failed to boot from sd card with a log reported by
the document [1]. In my case it always failed, a 100% failure against
75% reported by the document.
Instead of adding the patch to fix the problem, I preferred to update
the kernel version.
Tested on beaglebone black.
[1] https://forum.beagleboard.org/t/5-10-x-beaglebone-black-fails-to-boot-from-sd-card/33297
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Linux 6.1.9 installs more modules and this makes rootfs size to increase
and the default 60M size is not enough. So let's expand rootfs size to
120M.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a defconfig to build a 32b ARMv7-A U-Boot based firmware implementing
the subset of UEFI defined by EBBR[1], as well as a Linux OS disk image
booting with UEFI, to run on Qemu.
The generated firmware binary can also be used to install or run another OS
supporting the EBBR specification.
[1]: https://github.com/ARM-software/ebbr
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds support for the BeagleBone Green Wireless to the
existing beaglebone_defconfig, by making sure the relevant Device Tree
is built and installed.
Signed-off-by: Ramon Crichlow <rcrichlow9000@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BSH SMM S2 PRO (SystemMaster S2 Pro) Board is an add-on board which
provide input and output interfaces to a dedicated carrier board. It is
designed mainly to provide graphical/video and connectivity interfaces
to the appliance.
Board support package includes the following components:
- mainline Linux kernel 6.1.6
- mainline U-Boot 2022-07
- Default packages from buildroot
https://www.apertis.org/reference_hardware/imx8mn_bsh_smm_s2pro_setup/
Add Ariel D'Alessandro and Dario Binacchi as co-maintainer, we work
together on platform mainline
Build and tested using:
docker pull registry.gitlab.com/buildroot.org/buildroot/base:20220105.2314
Cc: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Heiko Thiery <heiko.thiery@gmail.com>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Tested-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BSH SMM S2 (SystemMaster S2) Board is an add-on board which provide
input and output interfaces to a dedicated carrier board. It is designed
mainly to provide graphical/video and connectivity interfaces to the
appliance.
Board support package includes the following components:
- mainline Linux kernel 6.1.6
- mainline U-Boot 2022-07
- default packages from buildroot
https://www.apertis.org/reference_hardware/imx8mn_bsh_smm_s2pro_setup/
The smm s2 board is basically the same as the pro except it boots from
NAND instead of eMMC.
Co-authored-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The updated device tree is provided by Acme Systems:
https://www.acmesystems.it/compile_kernel_5_15
It is released under GPLv2 or later.
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Migrate zcu106_pmufw.elf location from nealfrager github to Xilinx github.
The image is identical, so this patch has zero impact on functionality.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Migrate zcu102_pmufw.elf location from nealfrager github to Xilinx github.
The image is identical, so this patch has zero impact on functionality.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Migrate kv260_pmufw.elf location from nealfrager github to Xilinx github.
The image is identical, so this patch has zero impact on functionality.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Follow changes to other OrangePi boards, most importantly
orangepi-zero-plus2, which this board support is based on. This includes
switching to extlinux as boot mechanism and dropping custom U-Boot boot
script.
Rootfs image no longer fits into default 60M (mostly due to Linux
modules), so increase it to 120M.
While at it, bump Linux to 6.1.4 and U-Boot to 2023.01.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Linux DTS name has changed for the zynqmp_kria_kv260 with Xilinx 2022.2.
smk-k26-revA-sck-kv-g-revB has become zynqmp-smk-k26-revA-sck-kv-g-revB.
This DTS corresponds to generating the zynqmp-smk-k26-revA.dtb for the k26 som
and applying the zynqmp-sck-kv-g-revB.dtbo for the kv260 carrier board.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3477506541
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When using the buildroot compiler, it builds the u-boot.itb immediately
after building the fit-dtb.blob. This causes a build failure when using
the CONFIG_MULTI_DTB_FIT build configuration. This patch adds the necessary
dependency to guarantee that the fit-dtb.blob has finished building before
trying to build the u-boot.itb.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3310463281
This patch has been submitted to u-boot mainline:
https://lore.kernel.org/all/20221221075446.47141-1-neal.frager@amd.com/
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
NXP moved all its open source code repositories from Code Aurora Forum
to github. See for example:
39bc4d8196
Software packages are now grouped in several NXP github
projects/organizations (nxp-imx, nxp-qoriq, ...). See:
https://www.nxp.com/design/software/embedded-software/nxp-github:NXP-GITHUB
The NXP code published on Code Aurora is still present (at the time of
this commit) but is no longer receiving updates. It is also expected
to be shut down on 2023-03-31. The Code Aurora website
https://source.codeaurora.org/ currently show the following message:
"""
Note: Qualcomm Innovation Center Inc. maintained repositories have
migrated to git.codelinaro.org. QUIC repositories on this site will
not receive any updates after March 31, 2022, and will be deleted on
March 31, 2023. If your project depends on these repositories, please
adjust your tooling configuration to use the new, up-to-date project
location.
"""
For this reason, the NXP recipes using codeaurora.org urls need to be
updated to the correct github.com replacement.
Note: this commit does not change the component version. Only the
download URL is updated. The archive content is expected to be the
same.
Note 2: this commit updates the Kernel, U-Boot and ATF download urls.
The method is also changed from _CUSTOM_GIT to _CUSTOM_TARBALL.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Reviewed-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NXP moved all its open source code repositories from Code Aurora Forum
to github. See for example:
39bc4d8196
Software packages are now grouped in several NXP github
projects/organizations (nxp-imx, nxp-qoriq, ...). See:
https://www.nxp.com/design/software/embedded-software/nxp-github:NXP-GITHUB
The NXP code published on Code Aurora is still present (at the time of
this commit) but is no longer receiving updates. It is also expected
to be shut down on 2023-03-31. The Code Aurora website
https://source.codeaurora.org/ currently show the following message:
"""
Note: Qualcomm Innovation Center Inc. maintained repositories have
migrated to git.codelinaro.org. QUIC repositories on this site will
not receive any updates after March 31, 2022, and will be deleted on
March 31, 2023. If your project depends on these repositories, please
adjust your tooling configuration to use the new, up-to-date project
location.
"""
For this reason, the NXP recipes using codeaurora.org urls need to be
updated to the correct github.com replacement.
Note: this commit does not change the component version. Only the
download URL is updated. The archive content is expected to be the
same.
Note 2: this commit updates the U-Boot and ATF download urls.
The method is also changed from _CUSTOM_GIT to _CUSTOM_TARBALL.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NXP moved all its open source code repositories from Code Aurora Forum
to github. See for example:
39bc4d8196
Software packages are now grouped in several NXP github
projects/organizations (nxp-imx, nxp-qoriq, ...). See:
https://www.nxp.com/design/software/embedded-software/nxp-github:NXP-GITHUB
The NXP code published on Code Aurora is still present (at the time of
this commit) but is no longer receiving updates. It is also expected
to be shut down on 2023-03-31. The Code Aurora website
https://source.codeaurora.org/ currently show the following message:
"""
Note: Qualcomm Innovation Center Inc. maintained repositories have
migrated to git.codelinaro.org. QUIC repositories on this site will
not receive any updates after March 31, 2022, and will be deleted on
March 31, 2023. If your project depends on these repositories, please
adjust your tooling configuration to use the new, up-to-date project
location.
"""
For this reason, the NXP recipes using codeaurora.org urls need to be
updated to the correct github.com replacement.
Note: this commit does not change the component version. Only the
download URL is updated. The archive content is expected to be the
same.
Note 2: this commit updates only the ATF download urls.
The method is also changed from _CUSTOM_GIT to _CUSTOM_TARBALL.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NXP moved all its open source code repositories from Code Aurora Forum
to github. See for example:
39bc4d8196
Software packages are now grouped in several NXP github
projects/organizations (nxp-imx, nxp-qoriq, ...). See:
https://www.nxp.com/design/software/embedded-software/nxp-github:NXP-GITHUB
The NXP code published on Code Aurora is still present (at the time of
this commit) but is no longer receiving updates. It is also expected
to be shut down on 2023-03-31. The Code Aurora website
https://source.codeaurora.org/ currently show the following message:
"""
Note: Qualcomm Innovation Center Inc. maintained repositories have
migrated to git.codelinaro.org. QUIC repositories on this site will
not receive any updates after March 31, 2022, and will be deleted on
March 31, 2023. If your project depends on these repositories, please
adjust your tooling configuration to use the new, up-to-date project
location.
"""
For this reason, the NXP recipes using codeaurora.org urls need to be
updated to the correct github.com replacement.
Note: this commit does not change the component version. Only the
download URL is updated. The archive content is expected to be the
same.
Note 2: this commit updates only the ATF download urls.
The method is also changed from _CUSTOM_GIT to _CUSTOM_TARBALL.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NXP moved all its open source code repositories from Code Aurora Forum
to github. See for example:
39bc4d8196
Software packages are now grouped in several NXP github
projects/organizations (nxp-imx, nxp-qoriq, ...). See:
https://www.nxp.com/design/software/embedded-software/nxp-github:NXP-GITHUB
The NXP code published on Code Aurora is still present (at the time of
this commit) but is no longer receiving updates. It is also expected
to be shut down on 2023-03-31. The Code Aurora website
https://source.codeaurora.org/ currently show the following message:
"""
Note: Qualcomm Innovation Center Inc. maintained repositories have
migrated to git.codelinaro.org. QUIC repositories on this site will
not receive any updates after March 31, 2022, and will be deleted on
March 31, 2023. If your project depends on these repositories, please
adjust your tooling configuration to use the new, up-to-date project
location.
"""
For this reason, the NXP recipes using codeaurora.org urls need to be
updated to the correct github.com replacement.
Note: this commit does not change the component version. Only the
download URL is updated. The archive content is expected to be the
same.
Note 2: this commit updates the Kernel, U-Boot and ATF download urls.
The method is also changed from _CUSTOM_GIT to _CUSTOM_TARBALL.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NXP moved all its open source code repositories from Code Aurora Forum
to github. See for example:
39bc4d8196
Software packages are now grouped in several NXP github
projects/organizations (nxp-imx, nxp-qoriq, ...). See:
https://www.nxp.com/design/software/embedded-software/nxp-github:NXP-GITHUB
The NXP code published on Code Aurora is still present (at the time of
this commit) but is no longer receiving updates. It is also expected
to be shut down on 2023-03-31. The Code Aurora website
https://source.codeaurora.org/ currently show the following message:
"""
Note: Qualcomm Innovation Center Inc. maintained repositories have
migrated to git.codelinaro.org. QUIC repositories on this site will
not receive any updates after March 31, 2022, and will be deleted on
March 31, 2023. If your project depends on these repositories, please
adjust your tooling configuration to use the new, up-to-date project
location.
"""
For this reason, the NXP recipes using codeaurora.org urls need to be
updated to the correct github.com replacement.
Note: this commit does not change the component version. Only the
download URL is updated. The archive content is expected to be the
same.
Note 2: this commit updates the Kernel, U-Boot and ATF download urls.
The method is also changed from _CUSTOM_GIT to _CUSTOM_TARBALL.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NXP moved all its open source code repositories from Code Aurora Forum
to github. See for example:
39bc4d8196
Software packages are now grouped in several NXP github
projects/organizations (nxp-imx, nxp-qoriq, ...). See:
https://www.nxp.com/design/software/embedded-software/nxp-github:NXP-GITHUB
The NXP code published on Code Aurora is still present (at the time of
this commit) but is no longer receiving updates. It is also expected
to be shut down on 2023-03-31. The Code Aurora website
https://source.codeaurora.org/ currently show the following message:
"""
Note: Qualcomm Innovation Center Inc. maintained repositories have
migrated to git.codelinaro.org. QUIC repositories on this site will
not receive any updates after March 31, 2022, and will be deleted on
March 31, 2023. If your project depends on these repositories, please
adjust your tooling configuration to use the new, up-to-date project
location.
"""
For this reason, the NXP recipes using codeaurora.org urls need to be
updated to the correct github.com replacement.
Note: this commit does not change the component version. Only the
download URL is updated. The archive content is expected to be the
same.
Note 2: this commit updates the Kernel, U-Boot and ATF download urls.
The method is also changed from _CUSTOM_GIT to _CUSTOM_TARBALL.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NXP moved all its open source code repositories from Code Aurora Forum
to github. See for example:
39bc4d8196
Software packages are now grouped in several NXP github
projects/organizations (nxp-imx, nxp-qoriq, ...). See:
https://www.nxp.com/design/software/embedded-software/nxp-github:NXP-GITHUB
The NXP code published on Code Aurora is still present (at the time of
this commit) but is no longer receiving updates. It is also expected
to be shut down on 2023-03-31. The Code Aurora website
https://source.codeaurora.org/ currently show the following message:
"""
Note: Qualcomm Innovation Center Inc. maintained repositories have
migrated to git.codelinaro.org. QUIC repositories on this site will
not receive any updates after March 31, 2022, and will be deleted on
March 31, 2023. If your project depends on these repositories, please
adjust your tooling configuration to use the new, up-to-date project
location.
"""
For this reason, the NXP recipes using codeaurora.org urls need to be
updated to the correct github.com replacement.
Note: this commit does not change the component version. Only the
download URL is updated. The archive content is expected to be the
same.
Note 2: this commit updates the Kernel, U-Boot and ATF download urls.
The method is also changed from _CUSTOM_GIT to _CUSTOM_TARBALL.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NXP moved all its open source code repositories from Code Aurora Forum
to github. See for example:
39bc4d8196
Software packages are now grouped in several NXP github
projects/organizations (nxp-imx, nxp-qoriq, ...). See:
https://www.nxp.com/design/software/embedded-software/nxp-github:NXP-GITHUB
The NXP code published on Code Aurora is still present (at the time of
this commit) but is no longer receiving updates. It is also expected
to be shut down on 2023-03-31. The Code Aurora website
https://source.codeaurora.org/ currently show the following message:
"""
Note: Qualcomm Innovation Center Inc. maintained repositories have
migrated to git.codelinaro.org. QUIC repositories on this site will
not receive any updates after March 31, 2022, and will be deleted on
March 31, 2023. If your project depends on these repositories, please
adjust your tooling configuration to use the new, up-to-date project
location.
"""
For this reason, the NXP recipes using codeaurora.org urls need to be
updated to the correct github.com replacement.
Note: this commit does not change the component version. Only the
download URL is updated. The archive content is expected to be the
same.
Note 2: this commit updates the Kernel, U-Boot and ATF download urls.
The method is also changed from _CUSTOM_GIT to _CUSTOM_TARBALL.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NXP moved all its open source code repositories from Code Aurora Forum
to github. See for example:
39bc4d8196
Software packages are now grouped in several NXP github
projects/organizations (nxp-imx, nxp-qoriq, ...). See:
https://www.nxp.com/design/software/embedded-software/nxp-github:NXP-GITHUB
The NXP code published on Code Aurora is still present (at the time of
this commit) but is no longer receiving updates. It is also expected
to be shut down on 2023-03-31. The Code Aurora website
https://source.codeaurora.org/ currently show the following message:
"""
Note: Qualcomm Innovation Center Inc. maintained repositories have
migrated to git.codelinaro.org. QUIC repositories on this site will
not receive any updates after March 31, 2022, and will be deleted on
March 31, 2023. If your project depends on these repositories, please
adjust your tooling configuration to use the new, up-to-date project
location.
"""
For this reason, the NXP recipes using codeaurora.org urls need to be
updated to the correct github.com replacement.
Note: this commit does not change the component version. Only the
download URL is updated. The archive content is expected to be the
same.
Note 2: this commit updates the Kernel, U-Boot and ATF download urls.
The method is also changed from _CUSTOM_GIT to _CUSTOM_TARBALL.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NXP moved all its open source code repositories from Code Aurora Forum
to github. See for example:
39bc4d8196
Software packages are now grouped in several NXP github
projects/organizations (nxp-imx, nxp-qoriq, ...). See:
https://www.nxp.com/design/software/embedded-software/nxp-github:NXP-GITHUB
The NXP code published on Code Aurora is still present (at the time of
this commit) but is no longer receiving updates. It is also expected
to be shut down on 2023-03-31. The Code Aurora website
https://source.codeaurora.org/ currently show the following message:
"""
Note: Qualcomm Innovation Center Inc. maintained repositories have
migrated to git.codelinaro.org. QUIC repositories on this site will
not receive any updates after March 31, 2022, and will be deleted on
March 31, 2023. If your project depends on these repositories, please
adjust your tooling configuration to use the new, up-to-date project
location.
"""
For this reason, the NXP recipes using codeaurora.org urls need to be
updated to the correct github.com replacement.
Note: this commit does not change the component version. Only the
download URL is updated. The archive content is expected to be the
same.
Note 2: this commit updates the Kernel and U-Boot download urls.
The method is also changed from _CUSTOM_GIT to _CUSTOM_TARBALL.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NXP moved all its open source code repositories from Code Aurora Forum
to github. See for example:
39bc4d8196
Software packages are now grouped in several NXP github
projects/organizations (nxp-imx, nxp-qoriq, ...). See:
https://www.nxp.com/design/software/embedded-software/nxp-github:NXP-GITHUB
The NXP code published on Code Aurora is still present (at the time of
this commit) but is no longer receiving updates. It is also expected
to be shut down on 2023-03-31. The Code Aurora website
https://source.codeaurora.org/ currently show the following message:
"""
Note: Qualcomm Innovation Center Inc. maintained repositories have
migrated to git.codelinaro.org. QUIC repositories on this site will
not receive any updates after March 31, 2022, and will be deleted on
March 31, 2023. If your project depends on these repositories, please
adjust your tooling configuration to use the new, up-to-date project
location.
"""
For this reason, the NXP recipes using codeaurora.org urls need to be
updated to the correct github.com replacement.
Note: this commit does not change the component version. Only the
download URL is updated. The archive content is expected to be the
same.
Note 2: this commit updates the Kernel and U-Boot download urls.
The method is also changed from _CUSTOM_GIT to _CUSTOM_TARBALL.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NXP moved all its open source code repositories from Code Aurora Forum
to github. See for example:
39bc4d8196
Software packages are now grouped in several NXP github
projects/organizations (nxp-imx, nxp-qoriq, ...). See:
https://www.nxp.com/design/software/embedded-software/nxp-github:NXP-GITHUB
The NXP code published on Code Aurora is still present (at the time of
this commit) but is no longer receiving updates. It is also expected
to be shut down on 2023-03-31. The Code Aurora website
https://source.codeaurora.org/ currently show the following message:
"""
Note: Qualcomm Innovation Center Inc. maintained repositories have
migrated to git.codelinaro.org. QUIC repositories on this site will
not receive any updates after March 31, 2022, and will be deleted on
March 31, 2023. If your project depends on these repositories, please
adjust your tooling configuration to use the new, up-to-date project
location.
"""
For this reason, the NXP recipes using codeaurora.org urls need to be
updated to the correct github.com replacement.
Note: this commit does not change the component version. Only the
download URL is updated. The archive content is expected to be the
same.
Note 2: this commit updates the Kernel and U-Boot download urls.
The method is also changed from _CUSTOM_GIT to _CUSTOM_TARBALL.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NXP moved all its open source code repositories from Code Aurora Forum
to github. See for example:
39bc4d8196
Software packages are now grouped in several NXP github
projects/organizations (nxp-imx, nxp-qoriq, ...). See:
https://www.nxp.com/design/software/embedded-software/nxp-github:NXP-GITHUB
The NXP code published on Code Aurora is still present (at the time of
this commit) but is no longer receiving updates. It is also expected
to be shut down on 2023-03-31. The Code Aurora website
https://source.codeaurora.org/ currently show the following message:
"""
Note: Qualcomm Innovation Center Inc. maintained repositories have
migrated to git.codelinaro.org. QUIC repositories on this site will
not receive any updates after March 31, 2022, and will be deleted on
March 31, 2023. If your project depends on these repositories, please
adjust your tooling configuration to use the new, up-to-date project
location.
"""
For this reason, the NXP recipes using codeaurora.org urls need to be
updated to the correct github.com replacement.
Note: this commit does not change the component version. Only the
download URL is updated. The archive content is expected to be the
same.
Note 2: this commit updates the Kernel and U-Boot download urls.
The method is also changed from _CUSTOM_GIT to _CUSTOM_TARBALL.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NXP moved all its open source code repositories from Code Aurora Forum
to github. See for example:
39bc4d8196
Software packages are now grouped in several NXP github
projects/organizations (nxp-imx, nxp-qoriq, ...). See:
https://www.nxp.com/design/software/embedded-software/nxp-github:NXP-GITHUB
The NXP code published on Code Aurora is still present (at the time of
this commit) but is no longer receiving updates. It is also expected
to be shut down on 2023-03-31. The Code Aurora website
https://source.codeaurora.org/ currently show the following message:
"""
Note: Qualcomm Innovation Center Inc. maintained repositories have
migrated to git.codelinaro.org. QUIC repositories on this site will
not receive any updates after March 31, 2022, and will be deleted on
March 31, 2023. If your project depends on these repositories, please
adjust your tooling configuration to use the new, up-to-date project
location.
"""
For this reason, the NXP recipes using codeaurora.org urls need to be
updated to the correct github.com replacement.
Note: this commit does not change the component version. Only the
download URL is updated. The archive content is expected to be the
same.
Note 2: this commit updates the Kernel and U-Boot download urls.
The method is also changed from _CUSTOM_GIT to _CUSTOM_TARBALL.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NXP moved all its open source code repositories from Code Aurora Forum
to github. See for example:
39bc4d8196
Software packages are now grouped in several NXP github
projects/organizations (nxp-imx, nxp-qoriq, ...). See:
https://www.nxp.com/design/software/embedded-software/nxp-github:NXP-GITHUB
The NXP code published on Code Aurora is still present (at the time of
this commit) but is no longer receiving updates. It is also expected
to be shut down on 2023-03-31. The Code Aurora website
https://source.codeaurora.org/ currently show the following message:
"""
Note: Qualcomm Innovation Center Inc. maintained repositories have
migrated to git.codelinaro.org. QUIC repositories on this site will
not receive any updates after March 31, 2022, and will be deleted on
March 31, 2023. If your project depends on these repositories, please
adjust your tooling configuration to use the new, up-to-date project
location.
"""
For this reason, the NXP recipes using codeaurora.org urls need to be
updated to the correct github.com replacement.
Note: this commit does not change the component version. Only the
download URL is updated. The archive content is expected to be the
same.
Note 2: this commit updates the Kernel and U-Boot download urls.
The method is also changed from _CUSTOM_GIT to _CUSTOM_TARBALL.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
NXP moved all its open source code repositories from Code Aurora Forum
to github. See for example:
39bc4d8196
Software packages are now grouped in several NXP github
projects/organizations (nxp-imx, nxp-qoriq, ...). See:
https://www.nxp.com/design/software/embedded-software/nxp-github:NXP-GITHUB
The NXP code published on Code Aurora is still present (at the time of
this commit) but is no longer receiving updates. It is also expected
to be shut down on 2023-03-31. The Code Aurora website
https://source.codeaurora.org/ currently show the following message:
"""
Note: Qualcomm Innovation Center Inc. maintained repositories have
migrated to git.codelinaro.org. QUIC repositories on this site will
not receive any updates after March 31, 2022, and will be deleted on
March 31, 2023. If your project depends on these repositories, please
adjust your tooling configuration to use the new, up-to-date project
location.
"""
For this reason, the NXP recipes using codeaurora.org urls need to be
updated to the correct github.com replacement.
Note: this commit does not change the component version. Only the
download URL is updated. The archive content is expected to be the
same.
Note 2: this commit updates the Kernel and U-Boot download urls.
The method is also changed from _CUSTOM_GIT to _CUSTOM_TARBALL.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The kernel used is based on 6.1-rc3, so use the recently introduced 6.1
kernel headers version to fix a build issue:
Incorrect selection of kernel headers: expected 6.0.x, got 6.1.x
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The kernel used is based on 6.1-rc3, so use the recently introduced 6.1
kernel headers version to fix a build issue:
Incorrect selection of kernel headers: expected 6.0.x, got 6.1.x
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The kernel used is based on 6.1-rc3, so use the recently introduced 6.1
kernel headers version to fix a build issue:
Incorrect selection of kernel headers: expected 6.0.x, got 6.1.x
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a defconfig for the Starfive VisionFive2 board, a board built around the
Starfive JH7110 RISC-V 64bit SoC.
This board comes with functional lowlevel and U-Boot bootloaders in SPI
flash. The defconfig reuses these and only builds a (5.15 based) kernel and
rootfs.
The factory shipped U-Boot is hard coded to look at MMC partition 3.
Signed-off-by: Francois Dugast <francois.dugast.foss@gmail.com>
[Peter: add to DEVELOPERS]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Lichee RV Dock is a RISC-V Linux development kits with high integration,
small size and affordable price designed for opensource developer.
https://wiki.sipeed.com/hardware/en/lichee/RV/Dock.html
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Tested-by: Indrek Kruusa <indrek.kruusa@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Lichee RV - Nezha CM is a compute module with modular design, equipped
with Allwinner D1 chip (based on T-Head XuanTie C906 core), 512MB DDR3
RAM.
Board support is based on the nezha defconfig already available in
buildroot.
https://wiki.sipeed.com/hardware/en/lichee/RV/RV.htmlhttps://linux-sunxi.org/Sipeed_Lichee_RV
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Reviewed-by: Indrek Kruusa <indrek.kruusa@gmail.com>
Tested-by: Indrek Kruusa <indrek.kruusa@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is now based on Linux 6.1-rc3. We don't have an option for 6.1 yes, so
mark it as 6.0 headers.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The D1 support is now upstream, so we can use the upstream 1.1 release
instead of a custom version.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is now based on U-Boot 2022.10 and has gained SPL support, so use that
instead of sun20-d1-spl. With this we can also drop the u-boot patch and
patch directory.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch fixes a problem in the vck190 boot.bin generation as it should be
using the u-boot.dtb as the u-boot device tree and not the Linux system.dtb.
While both dtbs are basically the same, it is better not to mix this up.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit
5bbc20154e ("configs/zynqmp_kria_kv260_defconfig:
bump to Xilinx 2022.2"), we're using U-Boot version Xilinx 2022.2,
which already carries the psu_init_gpl.c, causing the build to fail as
our patch doesn't apply.
Fix this by dropping the no longer needed patch.
Fixes: 5bbc20154e ("configs/zynqmp_kria_kv260_defconfig: bump to Xilinx 2022.2")
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit
3c997c457a ("configs/zynqmp_zcu106_defconfig:
bump to Xilinx 2022.2"), we're using U-Boot version Xilinx 2022.2,
which already carries the psu_init_gpl.c, causing the build to fail as
our patch doesn't apply.
Fix this by dropping the no longer needed patch.
Fixes: 3c997c457a ("configs/zynqmp_zcu106_defconfig: bump to Xilinx 2022.2")
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch moves the board/zynqmp/kria/kv260/uboot.fragment file
to the board/zynqmp/kria directory. The reason is that this file
is the same for any kria starter kit and is not specific to the kv260.
By moving the file, it can be logically re-used with the kr260 when
support for this starter kit is added to buildroot.
KR260 Starter Kit:
https://www.xilinx.com/products/som/kria/kr260-robotics-starter-kit.html
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds support for Xilinx Versal VCK190 evaluation board.
VCK190 features can be found here:
https://www.xilinx.com/products/boards-and-kits/vck190.html
The VCK190 is based on the Xilinx Versal family:
https://www.xilinx.com/products/silicon-devices/acap/versal.html
The VC1902 included with the VCK190 evaluation board has Xilinx
AI Engine acclerators designed for accelerating machine learning
applications. Also included is an upgrade from prior Zynq and
ZynqMP families to ARM Cortex-A72 cores.
While the Linux kernel for Versal is quite similar to ZynqMP,
the boot process has significantly changed.
Triple-redundant MicroBlaze cores are used to boot and setup
Versal devices. For this reason, current buildroot support
will download pre-built firmware images and use Xilinx bootgen
to generate the boot.bin for the vck190.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 5370ec7451 was supposed to remove
the roc_pc_rk3399 defconfig. It actually removed everything related to
this defconfig, but not the defconfig itself.
The build failure this commit was supposed to fix is therefore still
happening. We fix it up by finally removing the defconfig.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3372859807
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps following packages to the newer version:
- OpenSBI v1.1
- U-boot v2022.10
- Linux 6.0
Linux kernel is hosted on AndesTech Github which includes ethernet,
SD card, DMAC, RTC, WDT drivers support. OpenSBI is based on v1.1
with andes platfrom fdt driver.
Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump ATF to boundary-lf-5.15.52-2.1.0.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- U-Boot branch boundary-v2022.04 from Boundary repo.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Based on NXP 5.15.52-2.1.0 release.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add the host-qemu package to enable testing on gitlab.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 223516b51e (configs/kontron_bl_imx8mm: U-Boot needs util-linux)
added the needed dependency against host-util-linux, but missed an
earlier comment about u-boot still failing [0]
The U-Boot makefile for the host tools does not handle the
compiler/linker options properly. There are some patches [1][2] that fixes
that issue already applied in the newer U-Boot version 2022.10. So we have to
bump U-Boot to fix an autobuilder failure.
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/3267233833
[0] https://lore.kernel.org/buildroot/CAEyMn7Y3UgT-8dYY5rbnzcPfbGmqRVXG=joWx1fSSCC=WiFzbg@mail.gmail.com/
[1] U-Boot: a638bd349ea43825 (kbuild: add KBUILD_HOSTLDFLAGS to cmd_host-csingle)
[2] U-Boot: 31a7688cbe0ed5ed (tools: mkeficapsule: use pkg-config to get -luuid and -lgnutls)
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[yann.morin.1998@free.fr:
- update commit log with reference to [0]
- slightly tweak commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes:
/usr/bin/ld: cannot find -lgnutls
/usr/bin/ld: cannot find -luuid
collect2: error: ld returned 1 exit status
when building U-Boot.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3301821264
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps the zed to Xilinx release 2022.2.
Xilinx 2022.2 includes:
- U-Boot 2022.01 bug fixes
- Linux bump to Linux 5.15.36 with bug fixes
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps the microzed to Xilinx release 2022.2.
Xilinx 2022.2 includes:
- U-Boot 2022.01 bug fixes
- Linux bump to Linux 5.15.36 with bug fixes
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch migrates the u-boot device tree definition
from uboot.fragment files to use BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS
instead for the zynqmp_kria_kv260_defconfig.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch migrates the u-boot device tree definition
from uboot.fragment files to use BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS
instead for the zynq_zc706, zynq_zed and zynq_microzed defconfigs.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.
See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.
This defconfig did not even have an entry in the DEVELOPERS file.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499140
Cc: Shyam Saini <shyam.saini@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.
See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.
This defconfig did not even have an entry in the DEVELOPERS file.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499051
Cc: Filip Skoneczny <fskoneczny@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This defconfig has been failing to build for several months, with
nobody stepping up to fix it. It's time to drop it.
See
https://lore.kernel.org/buildroot/20220806224338.0159e15c@windsurf/
for a notification on August 6, 2022 about the issues with this
defconfig.
This defconfig did not even have an entry in the DEVELOPERS file.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3234499050
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Bump U-Boot version to v2022.10.
- Bump Linux kernel version to v6.0.0.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch migrates the u-boot device tree definition
from uboot.fragment files to use BR2_TARGET_UBOOT_CUSTOM_MAKEOPTS
instead for the zynqmp_zcu102 and zynqmp_zcu106 defconfigs.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add BR2_TARGET_UBOOT_NEEDS_GNUTLS=y and BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX=y
since this are dependencies for building mkeficapsule u-boot tool.
Change the offset of the rootfs to left enough space for the U-Boot that
has increased.
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a defconfig to build an AArch64 U-Boot based firmware implementing the
subset of UEFI defined by EBBR[1], as well as a Linux OS disk image booting
with UEFI, to run on Qemu.
The generated firmware binary can also be used to install or run another OS
supporting the EBBR specification.
We do not have Linux 5.19 headers at the moment therefore we rely on 5.17
in the defconfig.
[1]: https://github.com/ARM-software/ebbr
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch will solve the problem of the pmufw built by the
zynqmp-pmufw-builder where soft resets crash for the zcu106.
Details of the issue can be found here:
https://lore.kernel.org/buildroot/87ilqccu3k.fsf@dell.be.48ers.dk/
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch will solve the problem of the pmufw built by the
zynqmp-pmufw-builder where soft resets crash for the zcu102.
Details of the issue can be found here:
https://lore.kernel.org/buildroot/87ilqccu3k.fsf@dell.be.48ers.dk/
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Armada target does not provide platform level support for SSP.
Fixes link failure:
(.text.asm.update_stack_protector_canary+0x4): undefined reference to `plat_get_stack_protector_canary'
This error does not show up on CI jobs because SSP was effectively always
disabled until the previous commit.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gitlab CI reported build failures for the sipeed RISC-V nommu boards
with the u-boot/sdcard enabled default configuration. The compilation
errors are related to the openssl/evp.h header file missing, e.g.:
In file included from tools/imagetool.h:24,
from tools/fit_common.c:20:
include/image.h:1166:12: fatal error: openssl/evp.h: No such file or
directory
1166 | # include <openssl/evp.h>
| ^~~~~~~~~~~~~~~
Fix this issue by adding BR2_TARGET_UBOOT_NEEDS_OPENSSL=y to the config
files so that host-openssl gets built as a dependency of U-Boot.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229992https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229994https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229996https://gitlab.com/buildroot.org/buildroot/-/jobs/3134229998
Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a defconfig for the Starfive VisionFive board, a board built around the
Starfive JH7100 RISC-V 64bit SoC (same as Beaglev).
This board comes with functional lowlevel and U-Boot bootloaders in SPI
flash. The defconfig reuses these and only builds a (6.0 based) kernel and
rootfs.
The factory shipped U-Boot is hard coded to look at MMC partition 3 and
misses some variables, so we provide a uEnv.txt to fix that up, based on
what is done in provided Fedora image.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update description:
TF-A to v2.4-stm32mp-r1
U-boot to version v2020.10-stm32mp-r2.1
Linux to v5.10-stm32mp-r2.1
This patch also updates U-boot to to use FIP image.
Reference:
https://octavosystems.com/octavo_products/osd32mp1-brk/
The device tree blobs, and the U-boot patches come from Octavo System:
https://github.com/octavosystems/meta-octavo-osd32mp1
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update description:
TF-A to v2.4-stm32mp-r1
U-boot to version v2020.10-stm32mp-r2.1
Linux to v5.10-stm32mp-r2.1
This patch also updates U-boot to to use FIP image.
Reference:
https://octavosystems.com/octavo_products/osd32mp1-red/
The device tree blobs, and the U-boot patches come from Octavo System:
https://github.com/octavosystems/meta-octavo-osd32mp1
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
mender-grubenv no longer uses the mender_grubenv* directories, instead opting
to put the mender_grubenv directories in a grub-mender-grubenv top-level
directory. While there is a legacy install mode which keeps the two separate
directories, it is better to move forward and rip the bandaid off before it
becomes too painful to update in the future if the legacy option is removed
entirely.
- Update the license file sha256 sum due to a year change.
- mender-grubenv no longer installs grub.cfg, so mender_grub.cfg must be copied
manually to grub.cfg.
- BOOT_DIR replaces ENV_DIR in the Makefile.
- The sleep grub2 module is now a requirement.
- /etc/mender_grubenv.config file must be present on the system for the
grub-mender-grubenv-{print,set} scripts to work properly.
In addition to the above changes, update the mender example board file to work
with the updated mender-grubenv version.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The defconfigs use a 5.19 kernel, so specify 5.19 kernel headers now that is
available.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The features of the Cortex A7 CPU on the Aspeed AST2600 A3 SoC are :
half thumb fastmult vfp edsp vfpv3 vfpv3d16 tls vfpv4 idiva idivt lpae evtstrm
the vfpv3d16 feature bit is common to both vfpv3 and vfpv4.
Drop BR2_ARM_FPU_VFPV4 which activates the use of vpfd32 (and breaks
user space). Set BR2_ARM_FPU_VFPV4D16 instead.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 1e2fe860f3 (configs/qemu_ppc64*: downgrade binutils to 2.36.1).
Since then, we've dropped support for binutios 2.36, and hte default is
2.38.x, which has the required changes to fix:
https://github.com/linuxppc/issues/issues/388
Pin the qemu-ppc64 defconfig to explicitly use binutils 2.38.x
Signed-off-by: Cédric Le Goater <clg@kaod.org>
[yann.morin.1998@free.fr:
- explictily force binutils 2.38
- reword commit log to explain why
- reword commit log: it's not really a revert
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
eno0 is the main ethernet interface
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With the move to 5.19-rc1, the ethernet interface is now supported.
Configure it using DHCP at startup.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Opensbi is now based on 1.1, U-Boot on 2022.07-rc3 and Linux on 5.19-rc1.
We don't yet support 5.19 kernel headers, so use 5.17 instead.
The incompatibility between opensbi and u-boot is now fixed, so drop
0001-arch-riscv-dts-sun20i-d1.dtsi-adjust-plic-compatible.patch.
The updated device tree in the kernel tree no longer specifies a memory
node (and the board exists in 512M/1G/2G variants, so instead use the
(otherwise identical) device tree provided by u-boot, where the memory
node is fixed up based on the detected memory size.
On riscv, the linux kernel unconditionally wants to build its bundled
dtc, so it needs flex and bison, even if it is not going to build any
DTB. We can get flex and bison either via the system ones, or we get
them as they are in LINUX_KCONFIG_DEPENDENCIES. However, relying on this
is a bit fragile, so we keep asking the kernel to build a DTB, so that
we do ensure that our host-{flex,bison} are built and in the dependency
chain of the kernel (for PPD).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr:
- extend on why we keep building a DTB from the kernel
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Use the mainline ATF as it supports the Pine64 ROCKPro64 board.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/2812054016
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Following the switch to Glibc as the default libc in Buildroot [1],
all defconfigs expecting uClibc with wchar (or any other uClibc
specific option) should now select BR2_TOOLCHAIN_BUILDROOT_UCLIBC too.
Even if all defconfigs has been tested with uClibc, maintainers
prefer to not enforce a C library and use the default of Buildroot,
which is now glibc.
This commit remove uClibc specific options BR2_TOOLCHAIN_BUILDROOT_WCHAR,
BR2_PTHREAD_DEBUG (required by gdb) and BR2_TOOLCHAIN_BUILDROOT_USE_SSP.
Since glibc always has argp built-in, also remove the standalone one
from affected toolchains...
Fixes:
https://gitlab.com/kubu93/buildroot/-/jobs/2911738579
[1] 4057e36ca9
[2] http://lists.busybox.net/pipermail/buildroot/2022-August/649998.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[yann.morin.1998@free.fr: also drop argp-standalone]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
To latest v2020.10 rev (1d21a3d5)
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Also bump linux headers version to 5.15.
Based on NXP 5.15.32-2.0.0 release.
Signed-off-by: Chris Dimich <chris.dimich@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The gcc man page states that specifying Neon as part of the fpu setting
has no effect, unless the -funsafe-math-optimizations is also specified,
because Neon is not compliant with IEEE 754:
```
If the selected floating-point hardware includes the NEON extension
(e.g. -mfpu=neon), note that floating-point operations are not
generated by GCC's auto-vectorization pass unless
-funsafe-math-optimizations is also specified. This is because NEON
hardware does not fully implement the IEEE 754 standard for
floating-point arithmetic (in particular denormal values are treated
as zero), so the use of NEON instructions may lead to a loss of
precision.
```
-funsafe-math-optimizations must be explictly specified per package to
really use NEON as FPU, but it's something that is left to the user as
well as setting BR2_ARM_FPU_NEON_VFPV4. This way the default
BR2_ARM_FPU_VFPV4D16 is used as previously. So let's revert the
offending patch.
This reverts commit aaced92e8c.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The gcc man page states that specifying Neon as part of the fpu setting
has no effect, unless the -funsafe-math-optimizations is also specified,
because Neon is not compliant with IEEE 754:
```
If the selected floating-point hardware includes the NEON extension
(e.g. -mfpu=neon), note that floating-point operations are not
generated by GCC's auto-vectorization pass unless
-funsafe-math-optimizations is also specified. This is because NEON
hardware does not fully implement the IEEE 754 standard for
floating-point arithmetic (in particular denormal values are treated
as zero), so the use of NEON instructions may lead to a loss of
precision.
```
-funsafe-math-optimizations must be explictly specified per package to
really use NEON as FPU, but it's something that is left to the user as
well as setting BR2_ARM_FPU_NEON_VFPV4. This way the default
BR2_ARM_FPU_VFPV4D16 is used as previously. So let's revert the
offending patch.
This reverts commit 115ee05214.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The gcc man page states that specifying Neon as part of the fpu setting
has no effect, unless the -funsafe-math-optimizations is also specified,
because Neon is not compliant with IEEE 754:
```
If the selected floating-point hardware includes the NEON extension
(e.g. -mfpu=neon), note that floating-point operations are not
generated by GCC's auto-vectorization pass unless
-funsafe-math-optimizations is also specified. This is because NEON
hardware does not fully implement the IEEE 754 standard for
floating-point arithmetic (in particular denormal values are treated
as zero), so the use of NEON instructions may lead to a loss of
precision.
```
-funsafe-math-optimizations must be explictly specified per package to
really use NEON as FPU, but it's something that is left to the user as
well as setting BR2_ARM_FPU_NEON_VFPV4. This way the default
BR2_ARM_FPU_VFPV4D16 is used as previously. So let's revert the
offending patch.
This reverts commit f8528acdfd.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The gcc man page states that specifying Neon as part of the fpu setting
has no effect, unless the -funsafe-math-optimizations is also specified,
because Neon is not compliant with IEEE 754:
```
If the selected floating-point hardware includes the NEON extension
(e.g. -mfpu=neon), note that floating-point operations are not
generated by GCC's auto-vectorization pass unless
-funsafe-math-optimizations is also specified. This is because NEON
hardware does not fully implement the IEEE 754 standard for
floating-point arithmetic (in particular denormal values are treated
as zero), so the use of NEON instructions may lead to a loss of
precision.
```
-funsafe-math-optimizations must be explictly specified per package to
really use NEON as FPU, but it's something that is left to the user as
well as setting BR2_ARM_FPU_NEON_VFPV4. This way the default
BR2_ARM_FPU_VFPV4D16 is used as previously. So let's revert the
offending patch.
This reverts commit 23329364e2.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Use the mainline ATF as it supports the Pine64 SoPine module.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2812053812
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump the kernel version for all riscv nommu configs from 5.18 to 5.19.
That way, we can remove the one and only riscv nommu patch,
since this patch is included in kernel 5.19.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
nanopi-neo no longer builds, as uboot needs python2 on the host:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2812053540
I no longer have access to that board, so I can't test an update to
either uboot or the kernel anymore.
Drop the board.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Broadcom Northstar family of SoCs is most commonly used for home
routers. It's an ARM platform with Cortex-A9 CPU(s).
All known Northstar devices come with CFE bootloader which almost
always expects a TRX firmware format (with exception for D-Link). Some
vendors (like Luxul and Netgear) wrap TRX in their own containers.
This board code provides:
1. Minimal kernel with support for on-SoC blocks. It enables Linux
drivers for SoC, watchdog, Ethernet, switch, USB, PCIe, LEDs).
2. Post image script building firmware images. In uses Buildroot
packages tools (lzma_alone, otrx, lxlfw) to build
bootloader-compatible images that can be flashed.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Those components are aligned with NXP BSP lf-5.10.72-2.2.0.
This commit also refresh the readme.txt file:
- update no longer working URLs,
- enhance flashing instructions (use ${mmcdev} uboot variable),
- add "bs=1M" option to dd for better flashing performances.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/2781800735
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Those components are aligned with NXP BSP lf-5.10.72-2.2.0.
This commit also refresh the readme.txt file:
- update no longer working URLs,
- enhance flashing instructions (use ${mmcdev} uboot variable),
- add "bs=1M" option to dd for better flashing performances.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/2781800730
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This bogus BR2_GLOBAL_PATCH_DIR value was added in commit
9dd5382d79 ("board/intel/galileo: fix
build failure with host gcc 10") back in February.
This should help fixing
https://gitlab.com/buildroot.org/buildroot/-/jobs/2781800667, as it
complains with:
WARN: defconfig ./configs/galileo_defconfig can't be used:
Missing: BR2_GLOBAL_PATCH_DIR=board/intel/galileo/patches
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The MMU option is currently located in the "Toolchain" menu, but it
doesn't make sense as it's really architecture related. In addition,
the selection of MMU has an impact on the choice of binary format
available, which is visible in the architecture menu.
Therefore, this commit moves the MMU option into the architecture
menu.
However, if we simply move it in arch/Config.in, it means that we
would have the following order of options:
Target architecture
Target architecture variant
ABI
MMU
Binary format
But really, the MMU option should be right below the Target
architecture variant, and the available ABIs derived from that.
The variant and ABI are arch-specfic, and defined in the per-arch
Config.in fragments; a Kconfig option can have only one prompt defined,
even under conditions, and appears at the place in the menu where its
prompt was defined. So, there is no (easy) possibility to have a
generic option appear where we want it.
Since in fact only 2 architectures show a visible prompt for the MMU
option (RISC-V and Xtensa), we move this option in
arch/Config.in.riscv and arch/Config.in.xtensa.
Some walkthrough the commit:
- BR2_ARCH_HAS_MMU_MANDATORY and BR2_ARCH_HAS_MMU_OPTIONAL are
removed as they are no longer needed
- BR2_USE_MMU becomes a hidden boolean
- All the places where we used to select BR2_ARCH_HAS_MMU_MANDATORY
now select BR2_USE_MMU directly.
- Introduce BR2_RISCV_USE_MMU and BR2_XTENSA_USE_MMU.
- All defconfigs that used "# BR2_USE_MMU is not set" are switched to
using the new option.
All in all, this simplifies things quite a bit, and allows to have a
good option ordering in the Target architecture menu.
This commit might raise a concern in terms of backward compatibility
with existing configurations. The only configurations that will be
broken by this change are RISC-V noMMU (which was very recently
introduced) and Xtensa noMMU (which we can probably agree is not such
a widely popular configuration).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
[yann.morin.1998@free.fr:
- expand further why we need per-arch MMU options
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
BR2_GCC_ENABLE_LTO only enables LTO in the toolchain, not in packages.
Use BR2_ENABLE_LTO instead to enable it in packages as well.
Note that BR2_GCC_ENABLE_LTO is currently non-functional (LTO is still
enabled in the toolchain even if it's not set), so we *do* have LTO
available in the toolchain.
Note that the option has no effect at all on these defconfigs anyway,
since they don't contain any package that is affected by the
BR2_ENABLE_LTO option. Still, it makes sense to enable it for these
really memory-constrained targets for when packages are added.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to version 2022.04 and remove the two patches
that have already been upstreamed.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-By: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Buildroot currently has all of the needed packages to use Mender as the primary
update system. However, there isn't any documentation or examples now that
provide a starting point for users. This lack of documentation makes setting up
a Mender based update system difficult and time-consuming.
Provided in this patch series is a mender_x86_64_efi_defconfig of which sets up
an x86_64 EFI based build that is ready to flash to a USB pen drive or use in a
QEMU environment. The system partition schema comprises of two equally sized
root partitions and a data partition that mounts to /var/lib/mender as a
persistent data store partition.
There is a board/mender/readme.txt provided, which gives users documentation on
how to flash the built image or boot the image using QEMU as well.
The post-build and post-image-efi scripts also have four options:
-a --artifact-name:
- The name of the artifact, this is added to /etc/mender/artifact_info
-o --data-part-size:
- The data partition size.
-d --device-type
- The device-type used by mender to catagorize registered devices.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Mikael Bourhis-Cloarec <mikael.bourhis@smile.fr>
[Romain: rebase on master (01.2022)
- update genimage-efi.cfg to use GPT partition table and genimage-15 syntax
- bump the kernel to 5.15.13
- Add host-libelf kernel dependency
- Use BR2_TARGET_GRUB2_BUILTIN_MODULES_EFI after commit 82d1e8c628
(boot/grub2: use none platform when building for host)
- Add regexp grub mandatory module for mender-grubenv
- remove startup.nsh from genimage-efi.cfg after commit 3efb5e31fc
(board, boot, package: remove usage of startup.nsh in EFI partition)]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
[Arnout:
- abbreviate sizes and partition uuids, remove implicit ones in genimage.cfg
- change data partition uuid to Linux (instead of x86_64 rootfs)
- fix whitespace and shellcheck errors in scripts
- remove --generate-mender-image option, always create it
- remove empty directory and -O ^64bit when creating data fs
- remove redundant e2fsck
- add -serial stdio option to qemu call
- update kernel to current stable 5.18.14
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This defconfig uses mesa3d's i965 DRI driver, but mesa3d no longer has
any DRI driver now, so this defconfig no longer builds.
Switching to the Gallium driver would require access to an actual board
to test, and that was not available when applying the mesa3d bump.
So, better drop this defconfig, and let an interested party reinstate
it, using the Gallium driver.
Note that we do still have the defconfig for the basic, non-graphical
Minnowbaord Max.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bumped the default version of the "arm-trusted-firmware" (a.k.a. TF-A)
from 2.5 to 2.7: updated the config and the tarball checksum.
Work-around CVE-2022-23960.
Updated the "qemu_aarch64_sbsa_defconfig" accordingly: it was using an
"arm-trusted-firmware" v2.4, it nows selects version 2.7.
Updated the license checksum because the license file changed
slightly: it mentions an additional file ("irq.h") released under a
dual GPL or MIT license.
Tested with the "qemu_aarch64_sbsa_defconfig" and QEMU: it boots
without new warning or error message.
Release notes:
<https://trustedfirmware-a.readthedocs.io/en/latest/change-log.html>
Signed-off-by: Olivier L'Heureux <olivier.lheureux@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add a buildroot configuration file to build a minimal Linux environment
for the Canaan KD233 board.
The configuration file is canaan_kd233_defconfig. It builds a bootable
kernel image with an embedded initramfs root file system. The image
built can be flashed to the board as is and does not require a boot
loader. This configuration uses the tiny busybox configuration defined
in board/canaan/k210-soc/busybox-tiny.config.
U-Boot currently does not support this board, making it impossible to
boot the kernel after loading it from the SD card. However, the SD card
is usable from Linux once booted using the canaan_kd233_defconfig
configuration.
The configuration also enable the kflash and pyserial-miniterm host
tools for flashing image files to the board and opening a terminal
console.
The readme.txt file documents how to build and boot the Canaan KD233
board with this configuration.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add two buildroot configuration files to build a minimal Linux
environment for the Sipeed MAIX Go board. The configurations are:
* sipeed_maix_go_defconfig: Build a bootable kernel image with an
embedded initramfs root file system. The image built can be flashed to
the board as is and does not require a boot loader. This configuration
uses the tiny busybox configuration defined in
board/canaan/k210-soc/busybox-tiny.config.
* sipeed_maix_go_sdcard_defconfig: Build a kernel image with a root
file system on the SD card and using U-Boot as the boot loader. This
uses the default busybox minimal configuration.
Both configurations also enable the kflash and pyserial-miniterm host
tools for flashing image files to the board and opening a terminal
console.
The readme.txt file documents how to build and boot the Sipeed MAIX-Go
board with these configurations.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add two buildroot configuration files to build a minimal Linux
environment for the Sipeed MAIX-Dock board. The configurations are:
* sipeed_maix_dock_defconfig: Build a bootable kernel image with an
embedded initramfs root file system. The image built can be flashed to
the board as is and does not require a boot loader. This configuration
uses the tiny busybox configuration defined in
board/canaan/k210-soc/busybox-tiny.config.
* sipeed_maix_dock_sdcard_defconfig: Build a kernel image with a root
file system on the SD card and using U-Boot as the boot loader. This
uses the default busybox minimal configuration.
Both configurations also enable the kflash and pyserial-miniterm host
tools for flashing image files to the board and opening a terminal
console.
The readme.txt file documents how to build and boot the Sipeed
MAIX-Dock board with these configurations.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add two buildroot configuration files to build a minimal Linux
environment for the Sipeed MAIXDUINO board. The configurations are:
* sipeed_maixduino_defconfig: Build a bootable kernel image with an
embedded initramfs root file system. The image built can be flashed to
the board as is and does not require a boot loader. This configuration
uses the tiny busybox configuration defined in
board/canaan/k210-soc/busybox-tiny.config.
* sipeed_maixduino_sdcard_defconfig: Build a kernel image with a root
file system on the SD card and using U-Boot as the boot loader. This
uses the default busybox minimal configuration.
Both configurations also enable the kflash and pyserial-miniterm host
tools for flashing image files to the board and opening a terminal
console.
The readme.txt file documents how to build and boot the Sipeed MAIXDUINO
board with these configurations.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add two buildroot configuration files to build a minimal Linux
environment for the Sipeed MAIX Bit board. The configurations are:
* sipeed_maix_bit_defconfig: Build a bootable kernel image with an
embedded initramfs root file system. The image built can be flashed to
the board as is and does not require a boot loader. This configuration
uses the tiny busybox configuration defined in
board/canaan/k210-soc/busybox-tiny.config.
* sipeed_maix_bit_sdcard_defconfig: Build a kernel image with a root
file system on the SD card and using U-Boot as the boot loader. This
uses the default busybox minimal configuration.
Both configurations also enable the python-kflash and pyserial-miniterm
host tools for flashing image files to the board and opening a terminal
console.
The readme.txt file documents how to build and boot the Sipeed MAIX-Bit
board with these configurations.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
There is no need to have configuration files direbtly set the
BR2_PACKAGE_HOST_ELF2FLT option. The need for the elf2flt utility is
automatically determined by gcc build in package/gcc/gcc.mk according to
the BR2_BINFMT_FLAT option.
Accordingly, we can remove the file package/elf2flt/Config.in.host to
get rid of the BR2_PACKAGE_HOST_ELF2FLT option. BR2_STRIP_strip
dependency on this option is replaced with a dependency on
BR2_BINFMT_ELF.
To stay consistent with the fact that elf2flt supports only the arm, sh,
sparc, xtensa and riscv-64 architectures, a dependency on these
architectures is added to the BR2_BINFMT_FLAT option in arch/Config.in.
Board configuration files setting the BR2_PACKAGE_HOST_ELF2FLT option
are also updated.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add config option to set the board specific GLOBAL_PATCH_DIR.
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/2750360083
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bumps TF-A to version v2.7 and U-Boot to version v2022.04 for
Qemu vexpress/trustzone board config.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
With U-Boot 2022.04 libuuid is required for building the host tool
mkeficapsule. The lib is included in the util-linux package. Thus the
BR2_TARGET_UBOOT_NEEDS_UTIL_LINUX config is needed.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch fixes the DP audio and video PLL configurations for the zynqmp-sm-k26-revA som.
It needs to be applied for both the kv260 and kr260 starter kits.
The Linux DP driver expects the DP to be using the following PLL config:
- DP video PLL should use the VPLL (0x0)
- DP audio PLL should use the RPLL (0x3)
- DP system time clock PLL should use RPLL (0x3)
Register 0xFD1A0070 configures the DP video PLL.
Register 0xFD1A0074 configures the DP audio PLL.
Register 0xFD1A007C configures the DP system time clock PLL.
This patch was build and run tested on a zynqmp-kria-kv260 target board.
Upstream-Status: submitted (https://lore.kernel.org/all/fa7e9abc419c9d7648405d1c62367dbe701d09b8.1652709736.git.michal.simek@amd.com/)
This patch will be removed from buildroot in a future release when no longer necessary.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
