The br-arm-internal-glibc.config is generally used as a configuration
to test the bleeding edge versions of components. However, it has been
lagging behind somewhat, so let's bring it up-to-date:
- Binutils 2.36.x
- GCC 11.x
Let the fun begin in the autobuilders!
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test RISC-V 64/musl, use a pre-built Bootlin
toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test RISC-V 64/glibc, use a pre-built Bootlin
toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Most of the toolchains now use gcc 9.x and kernel headers 5.9, instead
of gcc 8.x and kernel headers 5.4.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test Xtensa/uclibc, use a pre-built Bootlin toolchain.
To be noted: that fragment was in fact already using a Bootlin
bleeding-edge toolchain, because BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y is
missing from the fragment:
$ cat support/config-fragments/autobuild/br-xtensa-full.config >.config
$ make olddefconfig
$ grep BOOTLIN .config
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_ARCH_SUPPORTS=y
BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_XTENSA_LX60_UCLIBC_BLEEDING_EDGE=y
# BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_XTENSA_LX60_UCLIBC_STABLE is not set
The original fragment was supposed to use a stable toolchain, so we
switch to explictly use a stable Bootlin toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- add blurb about missing BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test x86-64/musl, use a pre-built Bootlin toolchain.
The previous configuration was for an Atom platform, but the Bootlin
toolchains only provide a Core i7 configuration. Since this is close
enough, we change to use this Core i7 configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test x86-64/uclibc, use a pre-built Bootlin toolchain.
The previous configuration was for Core2 platform, but the Bootlin
toolchains only provide a Core i7 configuration. Since this is close
enough, we change to use this Core i7 configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test SPARC64/glibc, use a pre-built Bootlin toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test SPARC/uclibc, use a pre-built Bootlin toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test SH4/uclibc, use a pre-built Bootlin toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: drop BR2_sh4=y which is the default]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test RISC-V 32/glibc, use a pre-built Bootlin
toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test PowerPC e500mc/uclibc, use a pre-built Bootlin
toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test PowerPC64le Power8/glibc, use a pre-built Bootlin
toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test OpenRISC/uclibc, use a pre-built Bootlin
toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test nios2/glibc, use a pre-built Bootlin toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test mipsel/uclibc, use a pre-built Bootlin toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test mipsel32r6/glibc, use a pre-built Bootlin
toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test Microblaze EL/uclibc, use a pre-built Bootlin
toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test m68k 5208/uclibc, use a pre-built Bootlin
toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test m68k 68040/uclibc, use a pre-built Bootlin
toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test ARMv7-M/uclibc, use a pre-built Bootlin
toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test ARMv7/musl, use a pre-built Bootlin toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test ARM Cortex-A9/glibc, use a pre-built Bootlin
toolchain. Since this was meant to test very recent version of
toolchain components, we use the bleeding edge toolchain variant.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test ARMv5/uclibc, use a pre-built Bootlin toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test ARCle HS38/uclibc, use a pre-built Bootlin toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Instead of using an external toolchain built specifically for the
autobuilders to test AArch64/glibc, use a pre-built Bootlin toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Until now the bootlin-x86-64-glibc was using a Bootlin toolchain as a
custom external toolchain. However, now that we have the
toolchain-external-bootlin package explicitly supporting Bootlin
toolchains as known toolchain profiles, it makes sense to use
that. Indeed, this will ensure that this autobuilder configuration
will use the latest available version of the Buildroot toolchain for
x86-64 glibc.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a minimal s390x s13 autobuild configuration for the
internal toolchain with glibc.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As we recently stopped testing the x86-64 Sourcery toolchain, it means
we no longer have any x86-64 glibc based toolchain in our
autobuilders. Since this is a pretty common configuration, it makes
sense to test it, which this commit does by adding a config fragment
to use the x86-64 glibc bleeding edge Bootlin toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This toolchain uses an old gcc 6.2.0, and newer versions of the
toolchain are no longer publicly available. This old gcc 6.2.0 causes
build issues of Boost, which are unfixable without updating the
toolchain. As we're about to drop support for this toolchain entirely,
we must stop testing it in our autobuilder infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update our bleeding edge br-arm-internal-glibc defconfig to use the
latest version of gcc and binutils, so that we test these in the
autobuilders.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Move to an external RISC-V 64 bit musl toolchain to ease the load
on the autobuilders.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a RISC-V 64-bit autobuild configuration for the internal
toolchain with uclibc.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Following commit eee96b0f0a that adds a
gcc patch for OpenRISC, the OpenRISC pre-built toolchain was
rebuilt. Let's use this new toolchain version for the autobuilders.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit updates all our toolchain configuration fragments for
pre-built Buildroot toolchains to use toolchains built with Buildroot
2020.02.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In commit aee39cbf27 (arch/riscv: set the default float ABI based on
ISA extensions), the default ABI changed, so the config fragments used
by the autobuilders were adapated accordingly, in commit f89871e810
(support/config-fragments: fix br-riscv{32,64} toolchain fragments).
But now, we need to revert again, because the newer toolchains are now
using the default ABI again.
We do not really do a revert, though, because the original change was
right, and a revert would mean it was not.
Fixes:
http://autobuild.buildroot.org/results/b59/b593267fb9fc9a002b977e049b2a5389dbaded30/ (riscv32)
http://autobuild.buildroot.org/results/b42/b42a4b22b29f47d5c85be119b310f1dfb61112a1/ (riscv64)
... and so many others on various packages...
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Mark Corbin <mark.corbin@embecosm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Simple bump of the toolchain components. For nios2, the toolchain now
has SSP support as well.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- fix version it commit title
- mention SSP for nios2
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since commit aee39cbf27 ("arch/riscv:
set the default float ABI based on ISA extensions"), RISC-V 32/64 use
the lp32d/lp64d ABIs by default. But our pre-built external toolchains
were built with the LP32/LP64 ABI.
Building with lp32d/lp64d gcc flags, but a toolchain built with the
LP32/LP64 ABI causes a number of failures such as:
/home/mark/buildroot-test/instance-1/output/host/riscv64-buildroot-linux-gnu/sysroot/usr/include/gnu/stubs.h:11:11: fatal error: gnu/stubs-lp64d.h: No such file or directory
or:
/home/mark/buildroot-test/instance-1/output/host/opt/ext-toolchain/bin/../lib/gcc/riscv64-buildroot-linux-gnu/7.4.0/../../../../riscv64-buildroot-linux-gnu/bin/ld: /tmp/cc2BTtFE.o: can't link hard-float modules with soft-float modules
/home/mark/buildroot-test/instance-1/output/host/opt/ext-toolchain/bin/../lib/gcc/riscv64-buildroot-linux-gnu/7.4.0/../../../../riscv64-buildroot-linux-gnu/bin/ld: failed to merge target specific data of file /tmp/cc2BTtFE.o
So let's fix our config fragments to reflect the ABIs those toolchains
were built with.
Fixes:
http://autobuild.buildroot.net/results/a3959b0613cf561059483abc580b144be4817d1a/ (libsepol)
http://autobuild.buildroot.net/results/3db50d8a0a913413b2198d6c301419136d2d22a7/ (attr)
http://autobuild.buildroot.net/results/7780fada05b8440ae3e97618615624a6a2dac03f/ (libusb)
and many others
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Prior to b3ba26150d
("toolchain/toolchain-external/toolchain-external-custom: be more
flexible on gcc version"), the default gcc version selected by
Buildroot for custom external toolchain was affected by the
BR2_ARCH_NEEDS_GCC_AT_LEAST_xyz definitions.
Since BR2_riscv selects BR2_ARCH_NEEDS_GCC_AT_LEAST_7, gcc 7.x was the
default gcc version assumed to be used in a custom RISC-V external
toolchain, so our config snippets for RISC-V toolchains were correct.
With b3ba26150d applied, the default gcc
version assumed for custom external toolchains is the latest one
(currently gcc 9.x), while our RISC-V toolchains use gcc 7.x. So we
now need to explicitly give the gcc version used by our RISC-V
toolchains, otherwise the build fails with:
Incorrect selection of gcc version: expected 9.x, got 7.4.0
Fixes:
http://autobuild.buildroot.net/results/b872befe1adec2633b9cbcc49bc0eb7619f606c2/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit a589325405
("support/config-fragments/autobuild: rename br-riscv64-musl config"),
the RISC-V 64-bit musl toolchain config snippet was renamed, but the
toolchain.csv file was not updated accordingly.
Due to this, utils/genrandconfig was no longer able to generate any
configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We do not have any configuration that tests the very bleeding edge gcc
and binutils versions, so let's change br-arm-internal-glibc to use
the latest version of gcc (9.x right now) and binutils (2.32 right
now). The idea is that this defconfig should be updated to the latest
version of gcc and binutils when their version is bumped.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
All toolchains have been rebuilt with Buildroot 2019.05.1. A number of
toolchains are now using Linux headers 5.1 instead of 4.19, because
5.1 is now the default version.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For internal toolchains, we have a policy of naming the files with
"internal", to clearly distinguish them from external toolchain
configurations.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a RISC-V 64-bit autobuild configuration for the internal
toolchain with musl.
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit replaces the two RISC-V configurations used for the
autobuilders to use pre-built external toolchains rather than internal
toolchains. This saves quite a bit of build time in the autobuilders,
and also allows people to reproduce build issues in a much more
efficient way, since rebuilding the toolchain is not needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Mark Corbin <mark.corbin@embecosm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
All toolchains have been rebuilt with Buildroot 2019.02-rc1.
Changes:
- Toolchains that were using no-longer maintained kernel headers
versions have been changed to use a variety of newer kernel headers
versions (4.4, 4.9 or 4.14).
- Since gcc 7.x is now the default in Buildroot, most toolchains that
simply use the default gcc version use 7.x instead of 6.x.
- br-arm-cortex-a9-glibc uses gcc 8.x, binutils 2.31 and kernel
headers 4.20
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a minimal RISC-V 32-bit autobuild configuration for the
internal toolchain with glibc.
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
