Currently, pkg-utils.mk (included via package/Makefile.in) is only included
when a configuration file already exists. This means that none of the
utilities it defines are available without .config.
In particular:
- the MESSAGE macro, causing pretty build output. Since some make targets
can be run even without .config, like 'make manual', not having this
pretty printing is odd.
- pkgname, pkgdir: in a subsequent patch, these functions will be used for
the generation of the manual, and since this should work also without
.config, we need these functions to be available.
This patch moves the include of pkg-utils.mk from package/Makefile.in to
Makefile, outside of the check for .config.
This is a quick fix. The full solution involves to minimize the amount of
Makefile code that is guarded by a check on .config. This approach will be
taken in the 2014.11 release cycle.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There are several packages that have a configuration file managed by
kconfig: uclibc, busybox, linux and barebox. All these packages need some
make targets to handle the kconfig specificities: creating a configuration
(menuconfig, ...) and saving it back (update-config, ...)
These targets should be the same for each of these packages, but
unfortunately they are not. Especially with respect to saving back the
configuration to the original config file, there are many differences.
A previous set of patches fixed these targets for the uclibc package.
This patch extracts these targets into a common kconfig-package
infrastructure, with the goals of:
- aligning the behavior of all kconfig-based packages
- removing code duplication
In order to use this infrastructure, a package should at a minimum specify
FOO_KCONFIG_FILE and eval the kconfig-package macro. The supported
configuration editors can be set with FOO_KCONFIG_EDITORS and defaults to
menuconfig only.
Additionally, a package can specify FOO_KCONFIG_OPT for extra options to
pass to the invocation of the kconfig editors, and FOO_KCONFIG_FIXUP_CMDS
for a list of shell commands used to fixup the .config file after a
configuration has been created/edited.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[yann.morin.1998@free.fr: add missing 4th argument when calling to
inner-kconfig-package (namely, 'target']
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
GCC has several builtin functions that implement atomic operations. Those
functions are architecture specific and may not be implemented by the
specific toolchain. In case of GCC for ARC those functions rely on
LLOCK/SCOND instructions which are optional in ARC CPU's. If ARC CPU doesn't
support those instructions but software tries to use them, then application
will be aborted with Illegal instruction exception. To avoid confusion user
should first specify that their CPU supports atomic extension, which will
allow selection of packages that use builtin atomic functions.
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Generic infra packages might not use LDFLAGS at all so add -static for
static builds to CFLAGS and CXXFLAGS too.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As stated in the buildroot user manual add just a single space before
and after a '=' sign.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also export BR2_DL_DIR for incoming download helper scripts.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This enables powerpc64 and powerpc64le. Currently, le needs at least
glibc 2.19 and gcc 4.9.0. For gdb, 7.7.1 works (added in an earlier
patch).
[Peter: also disallow gcc 4.8 for ppc64le]
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This variable contains extra environment variables that we can not export
since they are clashing with some build systems (eg. BUILD_DIR with
u-boot).
So, we may need these variables for uses other than the user's hooks
for instrumentation. For example, we'll use them later on to export
BUILD_DIR to the download helper scripts.
Fix comment, too.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This can be useful for post-{build,image} scripts, in case some host-tools
were specifically built to be used by these scripts.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the variables TARGET_PATH and HOST_PATH are not used anymore,
let's remove them.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thanks to the 2 previous patches of the series, BR_PATH contains
all locations in which host-packages may install programs.
This patch replaces the occurrences TARGET_PATH and HOST_PATH with
BR_PATH, everywhere these variables are used in the *.mk files.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the HOST_PATH and TARGET_PATH variables almost contain the same
things, let's factorize this in a single BR_PATH.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This option allows to customize the "vendor" part of the
toolchain tuple, where the toolchain tuple has the form
<arch>-<vendor>-<os>-<libc>. Use this option in situations
where gcc might make different decisions based on the vendor
part of the tuple.
[Thomas: move the config option in a slightly different place, so that
it does not appear between the C library selection and the C library
options.]
Signed-off-by: "Noam Camus" <noamc@ezchip.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The virtual-package infrastructure allows to easily define a
virtual package in a single line:
$ cat package/some-virtual-package/some-virtual-package.mk
$(eval $(virtual-package))
And that's all. :-)
Thanks to Éric for his work on the manual, that prompted the
idea for this virtual-package infrastructure! ;-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Mike Zick <minimod@morethan.org>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Collecting literals into separate section can be advantageous if that
section is placed into DTCM at link time. This is applicable for code
running on bare metal, but makes no sense under linux, where userspace
is isolated from the physical memory details. OTOH placing literals into
separate section breaks build of huge source files, because l32r
instruction can only access literals in 256 KBytes range.
Add -mtext-section-literals into xtensa ABI to fix build issues of
packages with huge sources.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The official Perl documentation refers only to PERL5LIB.
PERLLIB is obsolete, we don't need to be compatible with Perl4.
PERL5LIB is used in all environment, so it is simpler to just export it.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since we now always disable documentation on target, there is no need to
have a separate variable DISABLE_DOCUMENTATION anymore.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch removes deprecated symbol BR2_HAVE_DOCUMENTATION and all its
usage. Additionally, it removes the now unused BR2_DEPRECATED_SINCE_2012_11.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: fix s/BUILD_TYPE/SETUP_TYPE/ typo in manual as noted by Samuel]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds the OBJCOPY and RANLIB variables to
HOST_CONFIGURE_OPTS, since grub legacy will need these defined in
order to build properly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also export BUILD_DIR for post-{build,images} hooks, so they do have
a place to store generated files.
Note: this will be more einteresting for the instrumentation of steps,
to come in a later patch.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In order to avoid the work of converting the toolchain-crosstool-ng
logic to the package infrastructure, we remove it from Buildroot,
since it has been deprecated since quite some time.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the "BR2_JLEVEL" variable is empty use "make" without
the "-j" option, because to be able to use top-level parallel
make we must not force the number of jobs in sub-make.
Example:
make BR2_JLEVEL= -j8
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit refactors how Stack Smashing Protection support is handled
in Buildroot:
*) It turns the BR2_TOOLCHAIN_BUILDROOT_USE_SSP option into an option
that only enables the SSP support in uClibc, when using the internal
toolchain backend.
*) It adds an hidden BR2_TOOLCHAIN_HAS_SSP option that gets enabled
when the toolchain has SSP support. Here we have the usual dance:
glibc/eglibc in internal/external backend always select this
option, in the case of uClibc/internal, it gets selected when
BR2_TOOLCHAIN_BUILDROOT_USE_SSP is enabled, in the case of
uClibc/external, there is a new configuration option that the user
must select (or not) depending on whether the toolchain has SSP
support.
*) It adds a new options BR2_ENABLE_SSP in the "Build options" menu,
to enable the usage of SSP support, by adding
-fstack-protector-all to the CFLAGS.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The TARGET_{CC,CXX,LD,...} variables no longer contain any --sysroot
option, since we're now using a toolchain wrapper for external
toolchains.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When building for nommu flat targets the CFLAGS/CXXFLAGS/LDFLAGS must be
adjusted accordingly.
For gcc this means passing along -Wl,-elf2flt to signal the linker.
For ld this means -elf2flt.
Also correct the error in STACKSIZE settings from commit 9edf482d which
is setting gcc flags as ld flags and will surely fail (no package uses
it at the moment so it was never seen).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The current code to set ABI on ARM does the following:
ifeq ($(BR2_arm)$(BR2_armeb),y)
... set ABI without 'hf' suffix ...
else ifeq ($(BR2_ARM_EABIHF),y)
... set ABI with 'hf' suffix ...
endif
But since $(BR2_arm)$(BR2_armeb) will always be 'y' in the cases where
BR2_ARM_EABIHF is 'y', it means that the 'else' part of the condition
will never be used.
Fix this by appending 'hf' to the ABI variable when BR2_ARM_EABIHF is
selected.
[Peter: put EABIhf handling under arm/armeb conditional for consistency]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Blackfin for FDPIC targets uses *-linux-*, however for FLAT targets it
needs *-uclinux-* in order for gcc to build properly.
[Thomas: use a TARGET_OS variable instead of redefining
GNU_TARGET_NAME completely]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current SSP handling is incomplete.
First we need to build uClibc with SSP support for a complete
"experience".
Second, it doesn't hurt to add -fstack-protector-all to the
CFLAGS/CXXFLAGS since most users would expect buildroot to do this
rather than adding the flags themselves.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit introduces the support for the EABIhf ABI, next to the
existing support we have for EABI and OABI (even though OABI support
is deprecated). EABIhf allows to improve performance of floating point
workload by using floating point registers to transfer floating point
arguments when calling functions, instead of using integer registers
to do, as is done in the 'softfp' floating point model of EABI.
In addition to this, this commit introduces a list of options for the
floating point support:
* Software floating point
* VFP
* VFPv3
* VFPv3-D16
* VFPv4
* VFPv4-D16
and it introduces some logic to make sure the options are only visible
when it makes sense, depending on the ARM core being selected. This is
however made complicated by the fact that certain VFP capabilities are
mandatory on some cores, but optional on some other cores. The kconfig
logic tries to achieve the following goals:
* Hide options that are definitely not possible.
* Use safe default values (i.e for Cortex-A5 and A7, the presence of
the VFPv4 unit is optional, so we default on software floating
point on these cores)..
* Show the available possibilities, even if some of them are not
necessarily working on a particular core (again, for the Cortex-A5
and A7 cores, there is no way of knowing whether the particular
variant used by the user has VFPv4 or not, so we select software
floating point by default, but still show VFP/VFPv3/VFPv4 options).
It is worth noting that this commit doesn't add support for all
possible -mfpu= values on ARM. We haven't added support for fpa, fpe2,
fpe3, maverick (those four are only used on very old ARM cores), for
vfpv3-fp16, vfpv3-d16-fp16, vfpv3xd, vfpv3xd-fp16, neon-fp16,
vfpv4-sp-d16. They can be added quite easily if needed thanks to the
new organization of the Config.in options.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Currently, when we need to do a conditional on the type of C library
used, we need to take into account the three toolchain backends. As we
are going to add eglibc support to the Buildroot toolchain backend, it
would become even uglier, so this patch introduces two new hidden
options: BR2_TOOLCHAIN_USES_UCLIBC and BR2_TOOLCHAIN_USES_GLIBC, that
exist regardless of the toolchain backend. The entire Buildroot code
base is converted to use those options.
Note that we have intentionally created only one option
(BR2_TOOLCHAIN_USES_GLIBC) for both glibc and eglibc, since they are
essentially the same, as far as Buildroot is concerned.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The current code spawns as many jobs as up to twice the number of CPUs.
On small-class machines like laptops, with a limitted amount of memory,
but still a few CPUs (real or hyperthreads), the HDD becomes a bottleneck,
and it becomes almost impossible to do anythiong else while there is a
build in progress.
Limit the number of jobs to the number of CPUs plus one.
Even on fast machines with fast HDDs, this settings keeps the machine
fully busy (for those packages that can build in parallel, of course).
For example, building qemu or the linux kernel kept my hyperthreaded
hexa Core i7 with 18GiB of RAM, busy at 99% (I never ever managed to
get 100% even with more jobs, not even 200); while on my hyperthreaded
dual Core i5 with only 4GiB and a slow HDD, I still topped at 100% CPU,
while still able to do some work involving the HDD.
If the number of processors is not available, assume one.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Nathan Lynch <ntl@pobox.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add new option <PKG>_FLAT_STACKSIZE. The document needs to be updated.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Just introduce the symbol and options in arch generic Config.in.
Add FLAT types specific compiling flags into package makefile.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The external toolchain wrapper sets sysroot etc. to an absolute path.
By changing this to a relative path, it is possible to move the host
directory to a different location and still have a working build
system.
This only works for a downloaded external toolchain. For a pre-installed
external toolchain, it is possible to move the host directory to a
different location, but not the external toolchain directory (it does work
if the external toolchain directory lies within the host directory). For
an internal or crosstool-ng toolchain, there is no wrapper so updating the
sysroot path should be done in a different way.
See http://lists.busybox.net/pipermail/buildroot/2012-February/050371.html
for information about others things to do to make the host directory
relocatable.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The following changes LDFLAGS from -static to --static if building
with BR2_PREFER_STATIC_LIB so that various components actually build
statically.
Libtool interpret -static as linking statically with libraries that will not
be installed to the libdir; you have to pass it -all-static to force static
linking. Or, pass --static, which libtool passes on blindly to gcc. gcc
and (GNU) ld both interpret --static the same as -static (although this
isn't documented).
Signed-off-by: Andy Kennedy <andy.kennedy@adtran.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Many configure scripts support an option like --disable-doc, --disable-docs
or --disable-documentation. Pass all of these to configure.
In addition, not all Xorg packages accept the --disable-xxx. Instead they
look for xmlto and/or fop and build documentation if they exist. For host
packages, this may lead to build errors because /usr/bin/xmlto uses libxml2
and we set LD_LIBRARY_PATH to point to $(HOST_DIR)/lib, which may contain
a libxml2 as well. So it's essential to disable xmlto for host packages.
Also some whitespace cleanup.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The longcalls option allows calls across a greater range of addresses.
This option may degrade both code size and performance, but
the linker can generally optimize away the unnecessary overhead
when a call ends up within range
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Strip libthread_db the same as any other library, but strip libpthread
with --strip-debug. See the relevant mailing list discussion [1] for
additional details.
[1] http://lists.busybox.net/pipermail/buildroot/2012-October/060126.html
Signed-off-by: Richard Braun <rbraun@sceen.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Give the path to the realdelf binary for the target, similar to how we
do for the other tools.
[Peter: reworded]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
