Thus, the failing step can be easily extracted by autobuilders,
to ease with post-mortem analysis.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Except for architecture and processor names, buildroot uses capitalized
configuration names, so change the macro names for xtensa to follow that
standard.
Change the overlay file to have a subdirectory for each component
(gdb, binutils, gcc, etc.) to make it more future-prove.
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Xtensa is a configurable processor architecture, which allows to define
additional instructions and registers. The required variant specific
information for the toolchain is delivered in an 'overlay' file, which
needs to be 'untarred' to the corresponding directories after the
source is installed and patched.
This patch provides support for binutils, gcc, and gdb with a very
limited changes to the build scripts. These additions are only executed
for the Xtensa architecture and have no effect on other architectures.
[Thomas: rebased on top of the 'arch: improve definition of gcc mtune,
mcpu, etc.' patch, and changed 'Target ABI' to 'Target Architecture
Variant'].
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As stated in commit 555c2585bf, the
Xtensa architecture has been introduced in 2009 and never changed
since its initial introduction. It requires some special handling that
is a bit annoying, and despite our call to the initial developers, and
the announcement of the deprecation of the architecture during the
2012.05, nothing has happened. Therefore, drop support for this
architecture.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: me
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of providing two variables, make GNU_TARGET_NAME give the real
target name, and remove REAL_GNU_TARGET_NAME altogether.
Signed-off-by: Richard Braun <rbraun@sceen.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Re-integrate in gcc-uclibc-4.x.mk things from
toolchain/gcc/Makefile.in that were completely gcc-specific. There was
no reason to pull that when building with other backends than the
internal one.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The BR2_CONFIGURE_DEVEL_SYSROOT, BR2_CONFIGURE_STAGING_SYSROOT and
BR2_CONFIGURE_BUILD_TOOLS were used only in a few places, and it is in
fact clearer to just use their value in the various places they are
used.
The ultimate goal is to get rid of the toolchain/Makefile.in file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add gcc 4.7.0 to the toolchain options.
[Peter: drop 0001-toolchain-gcc-add-4.7.x-series.txt]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This modifies the definition of DOWNLOAD to receive two arguments:
the first one is the full URL of the file to download, whereas the second
(and optional) is the name the file will have once downloaded.
Same thing with the SOURCE_CHECK_WGET and SCP functions.
All calls to these functions have been changed to the shortest form of
the new API, except for toolchains acquisition. Since there is quite a
number of different toolchains this call to DOWNLOAD is better set to the
generic one.
Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Stephan Hoffmann <sho@relinux.de>
Downloading Microblaze LE toolchain works on a clean install
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Has been marked as broken since July 2010 (39e6ba1b), and nobody has
stepped up to support it, so now finally remove it completely.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The CONFIG_UPDATE macro is no longer defined in
package/gnuconfig/gnuconfig.mk, but instead in
package/Makefile.autotools.in. It it also changed a little bit to take
the directory of the package sources as argument, and the AUTOTARGETS
infrastructure is updated to use this macro.
[Peter: drop echo in CONFIG_UPDATE]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The name "patch-kernel.sh" is a bit stupid, since this script is used
to patch everything in Buildroot, not only kernel trees.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The arm-softfloat.patch.conditional patches are no longer in Buildroot
since 9af188d883 (October 2009), which
removed support for gcc 3.x and 4.0.x.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* Make mpc mandatory since we are probably building bleeding-edge
* Change snapshot naming convention to match the source
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add OpenMP support in gcc as an option instead of dynamically enabling
it when threads are present.
Also fix it up since we never installed libgomp to the target or staging
thus it was never really functional.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add gcc 4.6.0 to the toolchain repertoire:
Target gcc is known to be broken in some scenarios.
This version is considered experimental so things may break.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Make target gcc a more usable option.
* Nuke duplicate libgcc_s*.so* in /usr/lib since it confuses target gcc
* Copy *crt*.o files to the target system to unbreak gcc
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
gcc_target wants uclibc_target which is now first stage uclibc (not
real, from the NPTL build stage addition).
This triggers gcc-final to be rebuilt (albeit cached) and reinstalled,
thus touching all the stamps around and triggering a rebuild of
gcc_target.
Switch to $(STAMP_DIR)/gcc_libs_target_installed instead so that we only
depend on the last stage of cross gcc being installed to rebuild.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#3103
gcc/gmp/mpfr/mpc are only needed when using an internal buildroot toolchain,
so only add them to HOST_SOURCE then.
Otherwise we get some nasty fetch error when doing "make source"
[Peter: add gmpc/mpfr/mpc and reword commit text]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
WITH_TARGET_{GMP/MPC/MPFR} is unneeded since we are providing a sysroot.
It also breaks build-gcc under certain conditions.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We want to keep a copy around for the future SDK functionality.
Also it's a better fix for bug #1051.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Convert binutils to a proper autotargets package
* Add version 2.21 and drop version 2.17
* Hook up packaged binutils for target gcc
* Build tools are on HOST_DIR now so change it
* Move cross/host gcc to HOST_DIR
* Drop kludge from commit 3c77bab2ee
This is fixed in the next commit "gcc: install copies of libgcc,
libstdc++ and libgcj to the sysroot" - tested for arm & x86_64
targets.
* TARGET_CROSS now pointed to HOST_DIR too
[Peter: Config.in tweaks]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Convert mpc to a proper autotargets package
* Hook it up for binutils/gcc to use
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Convert mpfr to a proper autotargets package
* Bump to version 3.0.0-p8
* Hook it up for binutils/gcc to use
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Convert gmp to a proper autotargets package
* Bump to version 5.0.1
* Hook it up for binutils/gcc to use
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libgomp needs thread support on the target to build properly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The selection of linuxthreads, linuxthreads old or NPTL doesn't make a
lot of sense for external toolchains. So, instead, we :
* Introduce an hidden BR2_TOOLCHAIN_HAS_THREADS option, which must be
selected by toolchain specific options when thread support is
available. Package needing to test thread support should use this
option.
* Move the none/linuxthreads/linuxthreads old/NPTL selection to
Buildroot internal toolchain configuration.
* Add an option in external toolchain to tell if thread support is
available or not in the external toolchain. We assume that glibc
without threads is not possible, as Ulrich Drepper said in
http://sourceware.org/ml/libc-alpha/2005-08/msg00091.html
ffmpeg, dmalloc and openvpn are fixed to use the new
BR2_TOOLCHAIN_HAS_THREADS option. For openvpn, --enable-threads=posix
is no longer used, as the configure script doesn't even understand
this option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of having BR2_GCC_CROSS_CXX and BR2_INSTALL_LIBSTDCPP, with
BR2_GCC_CROSS_CXX not being visible (and therefore being useless),
let's just keep BR2_INSTALL_LIBSTDCPP to enable C++ in the toolchain
and install C++ libraries on the target.
We also take that opportunity to make BR2_INSTALL_LIBSTDCPP an hidden
option, which is selected by an option in Buildroot toolchain support
or an option in External toolchain support, just as we did for other
toolchain features.
Some work definitely remains to be done :
- The name BR2_INSTALL_LIBSTDCPP is ugly, but we keep it for the
moment in order to avoid changing all packages.
- We should clarify the other language-related options (Fortran,
Java, Objective-C, etc.).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add support for gcc configuration switch --with-cpu. Uses newly added
BR2_GCC_TARGET_CPU from the target config.
Signed-off-by: Konrad Eisele <konrad@gaisler.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The <tuple>/lib* symlinking added by 3c77bab2ee needs to
be moved up to the gcc-intermediate step now the NPTL stuff is merged,
otherwise 64bit builds fails (lib64 already created).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since 5575d205c (toolchain: remove multilib) we were no longer passing
--disable-multilib, which broke builds for multilib-capable archs (like
x86-64, ppc, ..).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch modifies current toolchain build sequence so that
NPTL enabled toolchain can be built. The new sequence works
well with linuxthreads as well.
It introduces a new pass for gcc cross compilation. The new
sequence is binutils->gcc-initial->linux-headers -> uclibc-configured
(some cheats to generate phony shared libc.so and libm.o)
-> gcc-intermediate(with shared lib support) -> uclibc -> gcc-final
I also added a new sample config arm_nptl_toolchain_defconfig which
builds the toolchain and busybox.
I have only tried it on arm. However it should work for other
architectures which support NPTL on uclibc e.g. mips, sh, x86, ppc, x86_64
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Supporting multilib is much more than just passing --enable-multilib
to gcc. You have to actually build the C library several times (once
for each multilib variant you want to support in your toolchain), and
to pass MULTILIB_OPTIONS/MULTILIB_EXCEPTIONS values to gcc to let it
know the set of multilib variants you're interested in.
Since we'll probably never support multilib toolchains in Buildroot,
just get rid of this BR2_ENABLE_MULTILIB option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a very advanced option, and it seems, according to
http://choices.cs.uiuc.edu/exceptions.pdf that SJLJ exceptions aren't
really interesting.
Users really interested by this can always use the
BR2_EXTRA_GCC_CONFIG_OPTIONS is they want.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The cross binutils and cross gcc are actually going to be executed
from $(STAGING_DIR)/usr, so the correct prefix is $(STAGING_DIR)/usr
and not /usr.
This also fixes what is known as the "AVR32 toolchain build failure",
which was due to the fact that the prefix directory wasn't writable
(since it was /usr).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit solves bug #1051. The problem in this bug in that WebKit
compiles a sample C program, which uses WebKit. As WebKit is written
in C++, even though the program it built with CROSS-gcc, it must be
linked with libstdc++. However, CROSS-gcc can't find the libstdc++ has
it's hidden inside <sysroot>/<tuple>/lib.
Therefore, this commit creates a symbolic link <sysroot>/<tuple>/lib
-> <sysroot>/lib before running the CROSS-gcc installation. While this
may look like a hack, this is the solution used by both Crosstool-NG
and OpenWRT.
Moreover, with this symbolic link in place, I think bug #1741 may also
be solved. The problem in this bug is that the linker tries to link
against /lib/libc.so.0. This is due to the fact that the linker finds
a libc.so script file in the original toolchain location and not
inside the copy of the toolchain sysroot in $(STAGING_DIR). As the
script file is found outside of the current toolchain sysroot, ld
considers the script has non-sysrooted, and therefore doesn't prefix
all paths found in the script file (such as /lib/libc.so.0) with the
sysroot path, leading to the failure.
So, in details, this commit :
* Adds a BR2_ARCH_IS_64 invisible config knob that is used to know if
the arch is a 64 bits architecture or not.
* Creates the <sysroot>/<tuple>/lib -> <sysroot>/lib symbolic link,
and the <sysroot>/<tuple>/lib64 -> <sysroot>/lib64 symbolic link if
needed.
* Fixes the external toolchain sysroot detection code so that the
'sed' replacement is done *after* the readlink -f evaluation.
I have tested this by building ARM, x86 and x86_64 toolchains with
Buildroot, and then use these toolchains as external toolchains to
build a full X.org/Gtk/WebKit/Midori stack. I have also done a
complete ARM Buildroot internal toolchain build with the same full
X.org/Gtk/WebKit/Midori stack.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
