The legacy zImage target for x86 was removed from the kernel in 2.6.30,
and we state in Config.in that we'll use bzImage if BR2_PACKAGE_LINUX_FORMAT
isn't set, so ensure we do so for x86.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The configure script contains a buggy test for the bool datatype and
it's size. This is normally not a big deal as the result isn't used
for anything, but when BR2_CONFIG_CACHE (default) is used, the
wrong ac_cv_type_bool result is stored in the cache, and other packages
like libcurl DO need the bool type, so that breaks the build.
Fix it by presetting those tests to sane values.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Make sure alsa-lib is built before gst-plugins-base if enabled, so
configure detects the presence of alsa and builds alsasink/src.
Reported-by: Phil Edworthy <Phil.Edworthy@renesas.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add ttymxc[0-2] to the list is the /etc/securetty of the Busybox skeleton.
This is useful for serial logins on i.MX based systems. The same serial
devices already appear in the generic "target_skeleton/".
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
gettext needs WCHAR support in the toolchain, and as libglib2 depends on
gettext and lots of stuff depends on libglib2, quite a lot of packages
needs to have their dependencies adjusted.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead use the same logic as in libgtk2. The rendering target selected
MUST be the same as libgtk2's, so just figure it out automatically
instead.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gstreamer has complicated dependencies (because of glib2), so use
depends on rather than select. At the same time default phonon support
to Y if gstreamer is available, as this support is likely wanted.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gstreamer has complicated dependencies (because of glib2), so use
depends on rather than select, similar to how it is done for gtk2.
At the same time default gtk/gstreamer support to Y if those are
available, as they are likely wanted.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libgtk2 can either use the X11 or directfb backend, depending on what
is selected - But if other packages 'select' libgtk2 there is no
guarantee that any backends are enabled, breaking the build.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Having a BR2_NEEDS_GETTEXT option, as introduced by
54d64798e1 isn't sufficient to express
the different kind of dependencies on gettext.
This commit, based on an idea by Peter Korsgaard, introduces two
different options :
* BR2_NEEDS_GETTEXT, which is true as soon as the toolchain doesn't
provide gettext itself (i.e, when the toolchain is uClibc based, be
it an internal or external toolchain)
* BR2_NEEDS_GETTEXT_IF_LOCALE, which is true when the toolchain
doesn't provide gettext *and* locale support has been enabled in
Buildroot.
A following commit adds some documentation that details how these
configuration variables should be used by packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Closes#1819
Fix two issues with pciutils:
- pciutils would look in /usr/share/misc for pci.ids, but install it in
/usr/share. This is because pciutils doesn't use a ./configure script,
so we have to also provide the configuration (make) arguments when
we run make install as well. Fix it by making it look into /usr/share
as that's simpler to do, and is what upstream does.
- the update-pciids script would call wget with the --no-timestamping
option, which isn't supported by busybox wget. Fix it by simply
removing that option as it isn't really critical.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Contrary to the comment in Config.in, mutt isn't broken when wchar
is enabled - In fact, it doesn't build without it.
Add BR2_USE_WCHAR dependency to make this clear.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix two issues with the icu build:
- icu source contains an #elif without any arguments, which g++ >= 4.4
flags as an error. This is both an issue for target and host build,
so restructure the .mk so any *both*patch is applied to both builds
(the other patches would cause trouble with host builds)
- icu build system isn't parallel make safe, use MAKE1
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
atngw100_defconfig: update to fix build failure:
* The AVR32 toolchain fails to build with the new uClibc version
0.9.31.x. Use the older uClibc 0.9.30.x branch instead.
* Disable linux-fusion as it fails to build
(why was this selected anyway, when DirectFB was not selected?).
* U-Boot 2010.03 is broken for AVR32. The build fails with:
zlib.c:31:27: error: asm/unaligned.h: No such file or directory
Select the older U-Boot 2009.08 version that builds instead.
* Disable rsync as it fails to build.
Build tested with 'make distclean && make atngw100_defconfig && make'
on an Ubuntu 10.04 x86_64 host.
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Having . in the PATH makes the toolchain build process fail because it
confuses host tools and target tools.
This fixes bug #75.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Things like LD_LIBRARY_PATH=. or even LD_LIBRARY_PATH=.:/usr/lib were
not detected as incorrect.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
