Otherwise it's a no-op for sh4.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Linux kernel does force compile with -m4-nofpu, which is only
available when building a multilib toolchain.
The interesting part here is, that buildroot use --disable-multilib for
gcc configure, but enables --with-multilib-list=m4,m4-nofpu in
the default configuration for Qemu targeting r2d emulation.
This results in a toolchain, which can be used for the kernel and
for userland without creating a multilib toolchain with different
kinds of libgcc version. In the multilib case there would be
subdirectories created (!m4 and m4-nofpu). As buildroot uses a
short version of toolchain creation, a multilib enabled gcc build
fails when creating libgcc.
So the best solution is to just keep multilib disabled, but always
add --with-multilib-list when sh4/sh4eb/sh4a/sh4aeb is choosen.
Tested with sh4/sh4a toolchain build and qemu defconfig with
gcc 4.8.x/4.9.x (with and without C++ enabled), uClibc and glibc.
Disable sh4a/sh4aeb for uClibc, as it does not implemented, yet.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
(ARM and SH4 uClibc toolchain builds)
It's required in some 32-bit architectures for the extended (64-bit)
atomic operations, like __sync_add_and_fetch_8.
These arches are at least: i386, mips & mipsel.
Target size growth is ~15 KiB for ARM.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that largefile is mandatory remove support for non-lfs
tweaks/variables in the package infra and the gcc build.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since a while, the semantic of BR2_PREFER_STATIC_LIB has been changed
from "prefer static libraries when possible" to "use only static
libraries". The former semantic didn't make much sense, since the user
had absolutely no control/idea of which package would use static
libraries, and which packages would not. Therefore, for quite some
time, we have been starting to enforce that BR2_PREFER_STATIC_LIB
should really build everything with static libraries.
As a consequence, this patch renames BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS, and adjust the Config.in option accordingly.
This also helps preparing the addition of other options to select
shared, shared+static or just static.
Note that we have verified that this commit can be reproduced by
simply doing a global rename of BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS plus adding BR2_PREFER_STATIC_LIB to Config.in.legacy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This commit enables the poison system directories option, which is now
available thanks to the gcc patches that have been added.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Romain Naour <romain.naour@openwide.fr>
Tested-by: Romain Naour <romain.naour@openwide.fr>
Remove the fortran and objective C language support since these have
been deprecated since more than a year ago.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Buildroot coding style defines one space around make assignments and
does not align the assignment symbols.
This patch does a bulk fix of offending packages. The package
infrastructures (or more in general assignments to calculated variable
names, like $(2)_FOO) are not touched.
Alignment of line continuation characters (\) is kept as-is.
The sed command used to do this replacement is:
find * -name "*.mk" | xargs sed -i \
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*$#\1 \2#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\]\+\)$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\ \t]\+\s*\\\)\s*$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\(\s*\\\)#\1 \2\3#'
Brief explanation of this command:
^\([A-Z0-9a-z_]\+\) a regular variable at the beginning of the line
\([?:+]\?=\) any assignment character =, :=, ?=, +=
\([^\\]\+\) any string not containing a line continuation
\([^\\ \t]\+\s*\\\) string, optional whitespace, followed by a
line continuation character
\(\s*\\\) optional whitespace, followed by a line
continuation character
Hence, the first subexpression handles empty assignments, the second
handles regular assignments, the third handles regular assignments with
line continuation, and the fourth empty assignments with line
continuation.
This expression was tested on following test text: (initial tab not
included)
FOO = spaces before
FOO = spaces before and after
FOO = tab before
FOO = tab and spaces before
FOO = tab after
FOO = tab and spaces after
FOO = spaces and tab after
FOO = \
FOO = bar \
FOO = bar space \
FOO = \
GENIMAGE_DEPENDENCIES = host-pkgconf libconfuse
FOO += spaces before
FOO ?= spaces before and after
FOO :=
FOO =
FOO =
FOO =
FOO =
$(MAKE1) CROSS_COMPILE=$(TARGET_CROSS) -C
AT91BOOTSTRAP3_DEFCONFIG = \
AXEL_DISABLE_I18N=--i18n=0
After this bulk change, following manual fixups were done:
- fix line continuation alignment in cegui06 and spice (the sed
expression leaves the number of whitespace between the value and line
continuation character intact, but the whitespace before that could have
changed, causing misalignment.
- qt5base was reverted, as this package uses extensive alignment which
actually makes the code more readable.
Finally, the end result was manually reviewed.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Cc: Yann E. Morin <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_CONF_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Disable shared build for host-gcc-final when building for static targets.
We really want static or shared, there's no such thing as "preferring static"
since we can't choose with any degree of granularity for which packages.
And it confuses linking scripts having both available at the same time. Fixes:
http://autobuild.buildroot.net/results/c54/c54bdf88eff6d60c7001cb0e2cb6792cc75178db/
[Thomas: slightly amend the commit to factorize the installation of
static libraries.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gcc build scripts use wrong variable name to specify xtensa overlay
application command. As a result gcc is built with the default overlay,
which leads to obscure failures later in the build process.
xtensa toolchain needs an additional configuration for a specific core
variant we're building for. This configuration is called 'overlay' and
is an archive with files for binutils, gcc and gdb that replace
corresponding files in toolchain components.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Our current stripping strategy requires that shared libraries have the
executable permission. However, this is by far not something
recognized as a standard behavior: Debian/Ubuntu distributions for
example do not have executable permissions on their
libraries. Therefore, pushing to upstream packages fixes that add the
executable permissions is not easy.
As a result, this commit improves the stripping logic so that it not
only strips the files that are executable, but also the ones that
match '*.so*', which should match both the shared libraries and the
dlopen()'able plugins, as long as they have a .so extension.
Thanks to this addition, a number of manual "chmod +x" done by various
packages can be removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No functional change, but internal variables should be name BR_foo, not
BUILDROOT_foo (I think ..).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since default configure options for host packages include
--disable-static, gcc was not configured to build static version of its
libraries (libgcc.a, libstdc++.a, ...).
This patch replace --disable-static by --enable-static in configure
command. Notice some options was removed sinces they was ignored by gcc
configure script.
Once it was compiled, this commit takes care to copy static libraries to
$STAGING
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Tested-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The mudflap library is only useful if one uses the -fmudflap gcc
option to do more checks on pointers/arrays. This commit adds an
option to enable/disable mudflap support at the gcc level. By default,
it is disabled, which saves a little bit of build time compared to the
default of gcc which consists in enabling mudflap support.
Since mudflap is now disabled by default, and ensured to never be enabled
on platforms where it is not available, some gcc.mk code that was used to
disable mudflap in problematic configurations can be removed.
Whether -fmudflap is used when building is left to the user.
[Peter: tweak commit text, fix white space]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Each stage of the gcc build needs to make a small dance before the
configuration step to create a build sub-directory and a symbolic link
to the configure script. The common gcc.mk had a
HOST_GCC_CONFIGURE_SYMLINK already used by the gcc-initial and
gcc-intermediate steps, but the gcc-final step wasn't using it.
This commit fixes this inconsistency, and therefore removes the
HOST_GCC_FINAL_CONFIGURE_SYMLINK macro.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The support for eglibc 2.17 was added to the internal toolchain
backend for 2013.08. This commit now adds glibc 2.18 support to the
internal toolchain backend.
Since the building procedure is very similar to the one of eglibc, we
have renamed the 'eglibc' package to 'glibc', and made it capable of
handling either glibc or eglibc.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit fixes the Objective-C support in the gcc package by making
sure that the runtime Objective-C library is properly installed to the
target.
It also takes this opportunity to slightly reword the Config.in option
help text to have a more meaningful explanation.
Finally, it fixes the gcc-final.mk code to use the correct
BR2_INSTALL_OBJC option rather than the non-existing
BR2_GCC_CROSS_OBJC option, to decide whether Objective-C support
should be enabled or not in the cross-compiler.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit fixes the Fortran support in the gcc package by making
sure that the runtime Fortran library is properly installed to the
target.
It also takes this opportunity to slightly reword the Config.in option
help text, to no longer mention gcc < 4.2 since they are no longer
supported in Buildroot, and to have a more meaningful explanation.
Finally, it fixes the gcc-final.mk code to use the correct
BR2_INSTALL_FORTRAN option rather than the non-existing
BR2_GCC_CROSS_FORTRAN option, to decide whether Fortran support should
be enabled or not in the cross-compiler.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes a build issue with the avr32 toolchain:
http://jenkins.free-electrons.com/job/buildroot/config=atngw100_defconfig/104/
Invalid configuration `MAKEINFO=missing': machine `MAKEINFO=missing' not
recognized
Instead pass it in the environment of ./configure, similar to how it was
done originally in 62322acb2c (toolchain/gcc: disable makeinfo).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since 5628776c4a
"toolchain-external: fix lib64 symlinks"
lib64 is a symlink to lib so there is no reason to copy the libraries
to lib64 anymore. This fixes multiple building problems
for buildroot toolchains:
[...]
mv: 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib64/libuClibc-0.9.33.2.so'
and 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib/libuClibc-0.9.33.2.so'
are the same file
mv: 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib64/libutil-0.9.33.2.so'
and 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib/libutil-0.9.33.2.so'
are the same file
mv: 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib64/libutil.so.0'
and 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib/libutil.so.0'
are the same file
rmdir: failed to remove
'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib64': Not a directory
[...]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When using eglibc, the ld-linux loader is installed as
ld-linux-armhf.so.3, but gcc 4.7.x was not yet updated, and generates
binaries that reference ld-linux.so.3. This was fixed starting with
gcc 4.8.x. In order to be able to use gcc 4.7, we create the
appropriate symbolic link.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 6b48b48034 ("add a know to enable/disable building a shared
libgcc"), from october 2006, isn't really as to why a
BR2_GCC_SHARED_LIBGCC option was needed. However, now that gcc has
been converted to the package infrastructure, it causes problems
because the host packages are always being passed --enable-shared
--disable-static, so re-adding --disable-shared on top of that break
things.
Moreover, our tests indicate that both a shared *and* a static version
of libgcc are built, and that linking dynamically and statically a
program that uses libgcc_s gives correct results: dynamically linked
against libgcc_s in the first case, statically linked in the second
case.
Therefore, it appears that this option is no longer necessary, and
removing it has the advantage of fixing the builds of
qemu_mips64_malta_defconfig and qemu_sparc_ss10_defconfig, both of
which had BR2_GCC_SHARED_LIBGCC not enabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Using the newly introduced 'eglibc' package, this commit enables the
option of building a toolchain using the eglibc C library in the
Buildroot toolchain backend.
In details, this commit:
* Creates a choice to select uClibc or eglibc in the Buildroot
toolchain backend (in toolchain/toolchain-buildroot/Config.in), and
removes the fact that the Buildroot toolchain backend forcefully
enables uClibc (toolchain/Config.in).
* Creates a BUILDROOT_LIBC variables, which points to the package
implementing the C library (i.e either 'uclibc' or 'eglibc').
* Modifies the gcc-final and gcc-intermediate makefiles to use the
BUILDROOT_LIBC variable instead of hardcoding the use of uclibc.
* Ensures that TLS support is always enabled when building eglibc.
[Peter: fix commit text to refer to BUILDROOT_LIBC]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Several sub-directories of the gcc code base are in fact not needed
for the Buildroot build: libjava/, libgo/ and gcc/testsuite/ being the
biggest ones. Avoiding their extraction saves quite a bit of disk
space, and compensates a bit the fact that we now extract three times
the gcc source code.
This requires changing the 100-uclibc-conf.patch to no longer patch
files from the libjava/ directory, since this directory is no longer
extracted.
[Peter: add comment about why this is done]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
