We don't need e2initrd_helper or the test I/O manager for the host, just
like we don't need it for the target.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Arnout: don't add --disable-rpath, since we *do* need rpath for the
host; otherwise we have to explicitly pass LD_LIBRARY_PATH to be able
to run tools linked with util-linux' libuuid/libblkid]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
So far we attempted to solve the conflicts between busybox and e2fsprogs
by removing busybox programs from /bin and /sbin, leaving the e2fsprogs
ones at /usr/bin and /usr/sbin. This fails with BR2_ROOTFS_MERGED_USR=y,
leading to situations like the one described in bug 9436.
We could provide a better solution by means of a fine-grained selection
of programs, like util-linux does, but this would require big changes in
e2fsprogs. So instead of resorting to dirty tricks we switch to a more
pragmatic approach:
- Drop all configs to select/deselect utilities without corresponding
enable/disable options to the configure script. In other words, we
always install the basic set of utilities.
- fsck has a configure option, so use it. Note that --enable-fsck is
only about the wrapper, not about e2fsck.
- Install e2fsprogs utilities at /bin and /sbin, overriding the ones
eventually installed by busybox.
- Let the e2fsprogs build system create the symlinks mkfs.ext2 -> mke2fs
etc. fsck.ext4dev and mkfs.ext4dev were dropped in version 1.43.4.
Notice that these changes do exactly the opposite of what is requested
in bug 9436. On the other hand the policy for e2fsprogs becomes coherent
with the one for util-linux: busybox never wins.
Fixes:
https://bugs.busybox.net/show_bug.cgi?id=9436 (no fix, in fact)
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Arnout:
- don't add 'default y' to resize2fs;
- don't install the host package in /bin instead of /usr/bin - we
install everything under /usr (until /usr will be removed, soon)]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Newer gcc requires even lower optimization, only with -O0 we
can successfully compile binutils for the target.
Fixes:
http://autobuild.buildroot.net/results/fb95cd7f7fcc532d036ed8f13853bc6f9a64d1b3
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reformat help text in Config.in to avoid warnings from
check-package. No content change intended.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add 'decorator'[1] package to Buildroot. Needed by 'traitlets'
package, which is added in the next patch.
[1] https://pypi.python.org/pypi/decorator
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
[Thomas: download from PyPi, add hash file, add entry in DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The patch added in commit c78b65c4f1 was
bogus: it adds some code conditionally on HAVE_CANONICALIZE_FILE_NAME
being undefined, but there is nothing that defines
HAVE_CANONICALIZE_FILE_NAME if canonicalize_file_name() is already
provided by the C library.
This commit fixes that by adding the appropriate autoconf check.
Fixes:
http://autobuild.buildroot.net/results/4f0eb2af09c92ff4cd7448211ffda432754d4e60/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adds an inline equivalent of canonicalize_file_name
using realpath().
Bug report (origin of this patch):
https://bugs.freedesktop.org/show_bug.cgi?id=99944
Resolves:
http://autobuild.buildroot.net/results/afa/afa4b97e012586585b11be1e70ed3c63a7c48a4d/
CCLD test-generated
CCLD test-utils
CCLD test-message
../../../src/libqmi-glib/.libs/libqmi-glib.so: undefined reference to `canonicalize_file_name'
collect2: error: ld returned 1 exit status
Makefile:440: recipe for target 'test-generated' failed
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current tools build assumes the host system when trying to detect if
swig/python are present. It then uses those tools from the path.
The upstream RFC included this commit set's patch but offered up
discussion on how to cleanly introduce a better method for detecting
swig and using the tools. The tools build really needs to be sysroot
and prefix/host dir tools aware.
Upsteam submission for RFC:
https://lists.denx.de/pipermail/u-boot/2017-May/289520.html
Workaround for:
http://autobuild.buildroot.net/results/6d52ac8bb71012aea6fc4c679691b31a3366728b
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
tinyxml2 can build both static and shared libraries. By default, only
shared library is built. Shared/static builds are controlled using
separate cmake flags BUILD_SHARED_LIBS and BUILD_STATIC_LIBS.
In static libs configuration, we internally pass -DBUILD_SHARED_LIBS=OFF
cmake flag to build system which disables both shared and static builds
of library, resulting in failures while linking executable with library.
So pass -DBUILD_STATIC_LIBS=ON cmake flag in case of static libs
configuration.
fixes:
http://autobuild.buildroot.net/results/d30/d301bcbe5db26068b35eaa94bd816ae8cf8ef2e1
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This configuration builds a 64bit image for RaspberryPi 3.
The size of the ext4 filesystem has to be extended to fit the large amount
(~60MB) of kernel modules enabled in the defconfig.
[Peter: drop gcc version selection / glibc, explain ext4 size requirement]
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Enable support for OpenSSH to use a hardware SSL engine if
cryptodev-linux is included. Without this, OpenSSH uses only
OpenSSL software crypto implementation.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
CC: Baruch Siach <baruch@tkos.co.il>
CC: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add firmware file for the Raspberry Pi 3 and Zero W Bluetooth module.
Note that to successfully download the firmware bluez5_utils needs a patch[1].
Even though the firmware file name (BCM43430A1.hcd) only mentions the
Bluetooth module, it is most likely tailored for the Raspberry Pi boards.
Firmware for the same BT module on other boards look different. For this
reason the name of the package is rpi-bt-firmware.
[1] http://www.spinics.net/lists/linux-bluetooth/msg69470.html
[Peter: correct Config.in ordering]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This allows a static build of picocom when BR2_STATIC_LIBS=y but the toolchain
provides static and shared libraries.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adds overlay support.
Drop the non-upstreamed 0002-extra-cflags.patch and instead simply pass the
needed CFLAGS as make arguments. Passing the full upstream warning flags
are not important in the Buildroot context, so this is simpler than
maintaining a patch.
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upcoming Kodi v18 depends on RapidJSON and detects it by using pkg-conf:
https://github.com/xbmc/xbmc/blob/master/cmake/modules/FindRapidJSON.cmake#L13
Currently our package installs only the header files, but RapidJSON.pc
is also needed. Luckily this can be fixed by switching to CMake which
does the job, also add configure options to disable the CMake build of
executables.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We so far were using a Cortex-A7 as the CPU for the rpi3, as this was
the closest we had available, in 32-bit mode, to the real CPU used in
the rpi3.
But now we can also use the Cortex-A53 in 32-bit mode, so we use that,
which makes for an optimised build (A53 has an improved instruction set,
as compared to the A7).
Also drop the DTB overlay option, it defaults to 'y'.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Martin Bark <martin@barkynet.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libcsv is a small, simple and fast CSV library written in pure
ANSI C89 that can read and write CSV data.
Signed-off-by: David Graziano <david.graziano@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter y in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter x in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 799aed7a18)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter w in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter v in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter u in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter t in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter s in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter r in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter q in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change renders the stm32f429discovery a bit more generic and reuse most
of its settings for the stm32f429-disc1 board.
Cc: Waldemar Brodkorb <wbx@openadk.org>
Cc: Davide Viti <zinosat@tiscali.it>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also, remove the compile flags to make it build
with GCC6 as it was added upstream
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter p in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter o in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
