Currently, enabling more than one filesystem image will make
'show-targets' list a few host packages more than once.
This is because all filesystem images add the same set of
host-packages to their dependencies, which are then added as-is
to the package list.
Thus, host-fakeroot, host-makedevs and, if needed, host-mkpasswd will
appear as many times as there are filesystem images enabled.
Fix that by sorting the package list, thus eliminating duplicates from
that list. Also sort the rootfs list for good measure. Sort the two
separately, so that rootfses are last.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With Linux kernel >= 4.13.x musl or1k can be used
with Qemu.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Or1k support improved, f.e. musl can be tested inside qemu.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With 1.0.27 NPTL for or1k is improved and can be used
by default.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following security issues:
- CVE-2017-8816: NTLM buffer overflow via integer overflow
- CVE-2017-8817: FTP wildcard out of bounds read
- CVE-2017-8818: SSL out of buffer access
For more details, see the changelog:
https://curl.haxx.se/changes.html#7_57_0
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's lttng-tools, not lttng-libust. ;-)
Fixes numerous build failures caused by a late autoreconf:
http://autobuild.buildroot.org/results/b84/b84a6e39fcca70c56bfe49d54c385dfe6da82422/
etc...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As of today quite a lot of ARC stuff got merged in upsream
such that we may finally use upstream realease for building
and even running Linux kernel and rootfs built with vanilla
binutils.
Essentially upstream release is still a bit behind our
GitHub-based releases but let's try to use vanilla version
and if we're lucky enough with just a small set of back-ported patches
we'll be able to use vanilla release(s) for everything in Buildroot.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
[Thomas: fixup the condition to select the special binutils site for ARC.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream gcc now has support for ARC, as of 7.x, with 7.2 being
usable, so let's allow its selection.
GCC from Synopsys GitHub still has a lot of fixes and improvements
most of which will be a part of the next upstream release but let's
see how it goes and if we see vanilla GCC doesn't require way too many
back-ported patches we'll be able to get rid of Synopsys GitHub here
at all.
As of today the only really required back-port is the one for non-uClibc
libc.
Back-ported from upstream master with help of:
-------------------->8--------------------
git format-patch 927c0132251f -1 -- . ':!gcc/ChangeLog' ':!libgcc/ChangeLog'
-------------------->8--------------------
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Spotted by check-package:
package/ndisc6/ndisc6.mk:14: possible typo: NDISC8_DEPENDENCIES -> *NDISC6*
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
OSTree is an upgrade system for Linux-based operating systems
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
[Thomas: use SPDX license code, fix license, it's GPL-2.0+ not GPL-2.0.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 940bfe2f43 with the
following changes:
- new hashes for 5.6.3 and 5.9.1 (there is no 5.9.2).
- BR2_PACKAGE_QT5BASE_LICENSE_APPROVED has been removed
- add GPL-3 to licences
- uses SPDX identifier for licences
- add missing dependencies (qt5base, qt5webkit, qt5declarative)
- removes /usr when qmake host-tools is invoked at configure
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
[Thomas: add entry in the DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Version 0.2 of rauc provides several bug fixes and minor feature
enhancements.
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 4a5140ecf (toolchain/buildroot: glibc requires kernel headers >=
4.5 with NaN-2008) added a restriction on kernel headers for glibc when
the architecture is using naN-2008.
However, such a restriction is usually associated to a comment explaining
the restriction, so the user knows what is happening.
That comment was forgotten in 4a5140ecf. Add it now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The rauc host tool (used to generate update bundles) runs mksquashfs so
host-squashfs is required for it to work at runtime.
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The variable QT5_SNAPSHOTS_SITE was introduced in commit 9d5ac9698 to
fetch sources of obsolete modules. It was used to download qt5webkit
tarballs.
The variable is not referenced anymore since the qt5webkit tarballs are
downloaded from the Qt community release site.
Since the introduction of qt-5.9 in aa1c40ba3, the QT5_SITE variable
was duplicated for no good reason.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patch 0002-arm-atomics-asm-with-new-binutils.patch is upstream as of
commit b261a24256792177a5f0531dbb25cc6267220ca5.
Patch 0003-Makefile-include-per-arch-Makefile-before-Makefile is
upstream as of commit 45ca5d3fcb6f874bf5ba55d0e9651cef68515395.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All patches are upstream.
C-sky support added. Lot of or1k NPTL bugfixes.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some packages (ex: skeleton-init-systemd) have a zero size so we cannot
divide by the package size. In that case make their percent zero
explicitly and avoid a ZeroDivisionError exception.
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If the Buildroot tree is read-only, then cache.txt is copied read-only into
the build directory, and the configuration step fails. Fix this in the
same way we do in other places, by opening permissions as we copy the file
using $(INSTALL).
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Sample quest and testing quest are not included in SOLARUS_LICENSE
since it's notinstalled by default.
Remove Werror when building with debugging symbols.
Add libpng runtime dependency since solarus games require png image
support.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Julien BOIBESSOT <julien.boibessot@armadeus.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove upstream patch.
Use the official archive and add a hash file.
Also add a license file hash.
Remove LGPL.txt license file since src/lzma directory has been removed
from the sources.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Julien BOIBESSOT <julien.boibessot@armadeus.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make WebKitGTK+ honor the value of CMAKE_BUILD_TYPE defined in the CMake
toolchain file by backporting the following upstream WebKit patch:
https://trac.webkit.org/changeset/225168
This reduces the generated binary sizes when building in "Release" mode
(BR2_ENABLE_DEBUG=n), for example when targeting ARMv8 the size reduction
is ~17 MiB.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If libbsd is found by the configuration process, mtools unnecessarily
adds a NEEDED field with libbsd to its dynamic section, but it does not
actually use anything from libbsd under Linux. The same may happen to
host-mtools if some libbsd package is installed on the host machine.
Prevent this by forcing configure to bypass the checking for the
existence of a gethostbyname function in libbsd.
I stumbled on this problem when I built host-mtools and later removed
libbsd to upgrade to Fedora 27, due to Bug 1504831[1]. The previously
built host/bin/mtools started to fail due to the missing libbsd.so.0.
1. https://bugzilla.redhat.com/show_bug.cgi?id=1504831
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add link to tarball signature.
Add license hashes.
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop libgcrypt dependency for SSL support; with newer version of gnutls
libgcrypt is not needed.
Drop the LIBS fix for static linking with gnutls that has been
introduced in commit 2d3d6d258b (libmicrohttpd: fix static linking with
gnutls). gnutls does not support static linking anymore.
Fix a comment typo.
Add license hash.
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 1d02d0be58)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit d745e94683)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In preparation for the addition of comments in the CSV file listing
toolchain configurations, we filter out such lines when reading the
CSV file in utils/test-pkg.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In preparation for the addition of comments in the CSV file listing
toolchain configurations, we filter out such lines when reading the
CSV file in utils/genrandconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we do nothing about packages that touch the same file: given
a specific configuration, the result is reproducible (even though it
might not be what the user expected) because the build order is
guaranteed.
However, when we later introduce top-level parallel build, we will no
longer be able to guarantee a build order, by the mere way of it being
parallel. Reconciliating all those modified files will be impossible to
do automatically. The only way will be to refuse such situations.
As a preliminary step, introduce a helper script that detects files that
are being moified by two or more packages, and reports them and the
impacted packages, at the end of the build.
The list being reported at the end of the build will make it prominently
visible in autobuilder results, so we can assess the problem, if any.
Later on, calling that helper script can be done right after the package
installation step, to bail out early.
Thanks Arnout for the pythonist way to write default dictionaries! ;-)
Note: doing it in python rather than a shell script is impressively
faster: where the shell script takes ~1.2s on a minimalist build, the
python script only takes ~0.015s, that is about 80 times faster.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Peter Seiderer <ps.report@gmx.net>
[Thomas: rename script without .py extension.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we store the list of files installed in target/ and associate
each of them to the package that installed it.
However, we sometimes may need to know what package installed which file
in staging/, for example to debug header collision, or in host/, to
debug what package installed what host tool.
Enhance the step instrumentation to also generate the list for staging/
and host/.
We maintain backward compatibility, for external scripts that wanted to
parse the previously existing list, by not renaming the target-related
package list. Only the staging- and host-related lists are named after
staging and host.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix missing word in .mk comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There is no need to redirect again and again for each new file added to
the list; we can just redirect once and for all.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To compute the list of files added by a package, we first store the list
of files before the install, do the install, list the files after the
install, and finally compare the two lists. The two lists are stored in
dot-files, hidden in the package's build dir.
We currently keep those two files, and only list the files installed in
target/
In followup patches, we'll also list files installed in staging/ as well
as files installed in host/.
Rather than add even more internal, hidden files in the package build
dir, we'll just re-use the same two temporary files to store the before
and after lists.
So, remove them after the comparison is done.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This helps the toolchains.free-electrons.com build logic re-use
directly the Qemu command lines from this readme.txt file, by having a
-append option similar to the ones used in other readme.txt files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This helps the toolchains.free-electrons.com build logic re-use
directly the Qemu command lines from this readme.txt file, by having a
-append option similar to the ones used in other readme.txt files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Rygel is a home media solution (UPnP AV MediaServer) that allows you to
easily share audio, video and pictures to other devices.
Additionally, media player software may use Rygel to become a
MediaRenderer that may be controlled remotely by a UPnP or DLNA
Controller.
Rygel achieves interoperability with other devices in the market by
trying to conform to the very strict requirements of DLNA and by
converting media on-the-fly to formats that client devices can handle.
Most Rygel functionality is implemented through a plug-in mechanism.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas:
- use SPDX license codes
- add hashes for license files
- move Config.in comment at the end of the Config.in file to not
break the indentation of the sub-options.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gupnp and gupnp-av defines two internal functions with the same name:
xml_util_get_element and xml_util_get_child_element_content, as a result
an application such as rygel can't be build statically.
To fix this issue, rename both functions as
xml_util_get_element2 and xml_util_get_child_element_content2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
