This patch adds a new package for the Starfive SPL tool. It is used to
add a header to the Secondary Program Loader for platforms based on
the Starfive JH7110 SoC.
Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a third bootstrap stage with Go1.21.x necessary for go1.22 bootstrap.
go-bootstrap-stage1 is Go1.4.x, the final version to support bootstrap using a C
compiler (later versions require the Go compiler for bootstrapping).
See: https://go.dev/doc/install/source#bootstrapFromSource
go-bootstrap-stage2 is Go 1.19.13, the last version to support bootstrap using
the Go1.4.x compiler.
go-bootstrap-stage3 is Go 1.21.8, the last version to support bootstrap using
the Go1.19.13 compiler. Go 1.20 requires a minimum of go 1.17.13 to bootstrap.
See: https://go.dev/doc/go1.20#bootstrap
This patch is in preparation for bumping the host-go package to >go1.22.x, which
requires a minimum of Go1.20.x for bootstrap.
See: https://go.dev/doc/go1.22#bootstrap
Signed-off-by: Christian Stewart <christian@aperture.us>
[Arnout: add GOCACHE definition]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Patrick Oppenlander <patrick.oppenlander@gmail.com>
[Peter: Fix check-package warnings, move to "Shell and utilities" and add
DEVELOPERS entry]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This tool is needed by some SoCs to sign the bootloader.
See the list of supported SoCs:
https://github.com/LibreELEC/amlogic-boot-fip
The variable BR2_PACKAGE_HOST_AMLOGIC_BOOT_FIP_DEVICE is used to specify
for which device this package needs to be used.
This tool uses pre-compiled binaries in order to sign the bootloader.
These binaries are provided under a proprietary license that prohibits
any redistribution of the resulting images.
A similar tool was tried to be added in the past:
http://patchwork.ozlabs.org/project/buildroot/patch/1533545408-11248-2-git-send-email-narmstrong@baylibre.com/
This time however a license file is present which can be used by
make legal-info. Additionally, acs_tool.pyc was replaced by acs_tool.py
and is therefore not compiled anymore.
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
[Romain:
add AMLOGIC_BOOT_FIP_REDISTRIBUTE = NO
add qstrip for BR2_PACKAGE_HOST_AMLOGIC_BOOT_FIP_DEVICE
remove build-fip-all.sh copy, not needed
factorize file copy in HOST_AMLOGIC_BOOT_FIP_INSTALL_CMDS
update commit log with the github url where we can find the list of supported SoCs.
]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Add a host option to build the xml2cpp-codegen part of the
sdbus-cpp package for use in creating adaptor and proxy
implementations from the D-Bus IDL.
Signed-off-by: Charles Hardin <ckhardin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
flutter-sdk-bin is a collection of host tools and plugins used to compile
flutter applications.
- As this is a collection of pre-compiled tools, append -bin to the end of the
package name.
- We must set the HOME directory variable to the sdk directory or else the
flutter dart binaries place .dart, .dart-sdk, and .flutter in ~/.
- set --clear-features, --no-analytics and --disable-telemetry first to disable
google tracking as soon as possible.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr:
- set FLUTTER_SDK_BIN_PUB_CACHE for other packages to make use of it
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Chromium and Chromium OS use a package of scripts called
depot_tools to manage checkouts and code reviews. This package
also includes the gclient utility.
gclient is a Python script to manage a workspace of modular dependencies that
are each checked out independently from different subversion or git
repositories. Features include:
- Dependencies can be specified on a per-OS basis.
- Dependencies can be specified relative to their parent dependency.
- Variables can be used to abstract concepts.
- Hooks can be specified to be run after a checkout.
- .gclient and DEPS are Python scripts. You can hack in easily or add
additional configuration data.
.gclient file: It's the primary file. It is, in fact, a Python script. It
specifies the following variables:
- solutions: an array of dictionaries specifying the projects that will be
fetched.
- hooks: additional hooks to be run when this meta checkout is synced.
- target_os: an optional array of (target) operating systems to fetch
OS-specific dependencies for.
- cache_dir: Primarily for bots, multiple working sets use a single git
cache.
gclient is necessary for checking out the flutter-engine source code, as the
release tarballs provided on the flutter-engine github are in no state to
compile. Google expects the use of gclient to download a source directory
structure suitable to build the Flutter engine.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The Buildroot icicle kit configuration uses the Hart Software
Service's (HSS) payload generator tool. This tool creates a formatted
payload image for the HSS zero-stage bootloader on PolarFire SoC,
given a configuration file and a set of ELF binaries. The
configuration file is used to map the ELF binaries or binary blobs to
the individual application harts (U54s). Add the HSS payload generator
as a host package to support this.
Signed-off-by: Jamie Gibbons <jamie.gibbons@microchip.com>
Reviewed-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Reviewed-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
composer describes itself as a dependency manager for PHP, it is used
by projects such as CakePHP.
Signed-off-by: Nicolas Carrier <carrier.nicolas0@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add swugenerator as host utility to generate images for swupdate with
all the possible options available like encryption, passkey etc.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Go 1.20 requires a minimum version of go 1.17.13 to bootstrap.
https://go.dev/doc/go1.20#bootstrap
As Go 1.4 was the previous version that could be compiled with C, there is now
no way to bootstrap go with a C compiler, unless we use a two-stage bootstrap:
- build host-go-bootstrap-1.4-20170531
- build host-go-bootstrap-1.19.10 with host-go-bootstrap-1.4-20170531
- build host-go-1.20 with host-go-bootstrap-1.19.9
This is implemented in this commit first, before upgrading host-go to 1.20.
Note: the .patch files from package/go version 1.19.x are not necessary for
package/go-bootstrap-stage2 and have not been included there.
Previous discussion of possible alternatives:
https://lore.kernel.org/all/CA+h8R2rtcynkCBsz=_9yANOEguyPCOcQDj8_ns+cv8RS8+8t9A@mail.gmail.com/https://lore.kernel.org/all/20220525234312.643dfc03@windsurf/T/
Signed-off-by: Christian Stewart <christian@aperture.us>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To make version bumping easier, move lld to a new llvm-project subfolder
and specify site and version for the project.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Sebastian Weyer <sebastian.weyer@smile.fr>
Tested-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Make the host variant of crudini package. This can be useful in
post-{build,image} scripts.
Signed-off-by: Konstantin Menyaev <KAMenyaev@sberdevices.ru>
Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
[yann.morin.1998@free.fr: select python3, don't depend on it]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Make the host variant of python-iniparse as host-crudini dependency.
Note: usually, we would not have needed to add a Config.in.host,
because it is jsut a library, but since there is an Config.in.host
for python-six, we need to select it, so we need an host entry.
Signed-off-by: Konstantin Menyaev <KAMenyaev@sberdevices.ru>
Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
[yann.morin.1998@free.fr:
- add the note
- reorder alphabetically
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The Jetson AGX Orin python script to flash requires host python-pyyaml.
Add a Config.in.host option for the host python-pyyaml package.
BR2_PACKAGE_HOST_PYTHON_PYYAML
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds Xilinx bootgen as a host package to buildroot.
bootgen is a required utility for generating a boot.bin for
Xilinx versal products.
In addition, for developers who wish to use secure boot with
Xilinx SoC products such as zynq and zynqmp, bootgen has a
more complete offering in secure boot features than the u-boot
mkimage utility.
https://github.com/Xilinx/bootgen
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mosquitto can be configured to use password files. Those have a very
trivial layout, with one "username:password" tuple per line, not unlike
Apache's htpasswd file format, but unlike htpasswd files, the password
can be either in clear (boo!), or encrypted (by calling into openssl's
libcrypto).
Encryption of passwords is done with an ad-hoc tool, mosquitto_passwd,
again very like Apache's htpasswd, but the encrypted form is different
(of course). This encryption is handled by mosquitto_passwd, which can
create, update, or delete users, all while storing their encrypted
password, or it can also convert a password file with clear-text
passwords into a password file with encrypted passwords, e.g. it turns
each "foo:bar" entry to their corresponding encrypted form, like
"foo:$7$101$yLPgk5fn46d....==".
It can be very interesting to maintain a clear-text DB of
users:passwords in configuration management [0], and only convert it to
encrypted passwords when embedded on the target.
Add a host variant for mosquitto, which only installs mosquitto_passwd.
[0] ensuring safety, confidentiality, and integrity of that DB is left
as an exercise to the user, and is clearly out of scope for Buildroot,
like storing the root password in the .config is.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Titouan Christophe <titouanchristophe@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Dracut is the tool used by desktop distributions to build initrds.
In the embedded world, it can be very useful, too, for instance when
wanting to create an initramfs for a system recovery mode.
Whereas it is definitively possible to achieve this with buildroot, the
process is to have a dedicated buildroot configuration for that, and
perform a full build. Instead of doing that, dracut can pick the needed
binaries/shared libraries, configuration files, or kernel modules from
the 'target' directory.
The advantage is to save build time, and also to have a consistency
between the packages versions taken for the recovery and the production
filesystem.
The principle of dracut is based on the so-called 'dracut modules'. The
modules determine what will be included in the initramfs. For example,
one of dracut's modules checks the kernel modules that are included and
also includes the corresponding firmware blobs.
On the host, they are on host/lib/dracut/modules.d
Each directory as a prefix number for the order of execution, and
at least a "module-setup.sh" script.
Dracut sources all of them, and typically calls the "check()" function,
which is the placeholder for required binaries (that are aimed to be
polulated in the initrd), then the "depends()" function, that lists
other modules to depend on, and the "install()" function, that makes
the actual work.
Dracut was initially thought to work with systems using systemd,
but it can also work without it. Do to so, every "systemd-xxx"
module must be disabled in the dracut configuration file. For
convenience, the 05busybox-init module is provided, to support
busybox init system. Note that this module should *not* be enabled when
using systemd init. It is therefore only installed if busybox init is
selected.
Musl and uClibc make assumptions about the existence of some symlinks
that are not discoverable with readelf. Therefore, another module
05libc-links is provided that creates those links. The module is
installed regardless of which libc is used - the script itself discovers
if the links need to be installed based on which libc is found.
Signed-off-by: Thierry Bultel <thierry.bultel@linatsea.fr>
[arnout@mind.be: many changes]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Adam Duskett <aduskett@gmail.com>
[yann.morin.1998@free.fr: some additional fixups]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Users may want to use buildkitd and buildkitctl to build images on the host.
Adds package host-moby-buildkit and BR2_PACKAGE_HOST_MOBY_BUILDKIT.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Christian Stewart <christian@paral.in>
[yann.morin.1998@free.fr:
- drop unneeded _BIN_NAME and _INSTALL_BINS
- s/OCP/OCI/
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
UUU (Universal Update Utility) is a Freescale/NXP I.MX Chip image deploy
tools. It is an evolution of MFGTools (aka MFGTools v3). For this and
for backward compatibility we have created a new package instead of
updating the mfgtools package.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
[Arnout: fix check-package warnings]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add the kflash Kendryte K210 UART ISP Utility as a host package to allow
users to program their board boot ROM or SRAM with built images.
The kflash utility is available through the pypi.org python package
index. The project is homepage is: https://github.com/vowstar/kflash.py.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This new package provides "lzma_alone" host binary based on the original
LZMA SDK. It provides few extra options when compared to the LZMA Utils
/ XZ Utils project "lzma" binary (already packaged as the "lzma").
This packaging schema (LZMA SDK with lzma -> lzma_alone rename) follows
Debian's solution. Please note that Debian also uses LZMA SDK for the
base "lzma" tool which may be considered for Buildroot too - as an
independent change. Similar packaging is also used by Ubuntu & Arch.
lzma_alone is a requirement for preparing firmware images for some
Broadcom based home routers with a picky CFE bootloader. It has limited
LZMA support and building compatible images requires specifying
dictionary size and lc/lp/pb LZMA values manually.
Version 9.22 is used as it's the last release using .tar.bz2 format. The
same version is used by Debian.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
[yann.morin.1998@free.fr:
- add the upstream sha1, add comments
- fix license
- add license file and its sha256
- fix coding styles
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Users may want to debug Go programs using dlv on the host machine.
Adds package host-delve and BR2_PACKAGE_HOST_DELVE.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
pahole is a tool used to show data structure embedded in debugging
information formats like DWARF.
It is notably needed by the Linux kernel to generate BPF Type
Format (BTF) information used by Compile Once - Run Everywhere (CO-RE)
BPF tools.
To be built, pahole needs __LIB to be set to lib at stated in its
README.
Signed-off-by: Francis Laniel <flaniel@linux.microsoft.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Spike, the RISC-V ISA Simulator, implements a functional model of one
or more RISC-V harts.
The host package provides an alternative solution to qemu.
https://github.com/riscv-software-src/riscv-isa-sim
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While currently there is no in-tree Buildroot package which depends on
host-python-greenlet, we (Adder Technology) have some proprietary
modules that use it as part of their builds.
I've tested python-greenlet as host package and confirmed that it builds
and works correctly. Someone else might require it, so I'm proposing its
inclusion.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This reverts commit d19077677f, but the
package now uses the cargo-package infrastructure with its vendoring
mechanism, which allows us to avoid the problems that caused the
package to be removed in d19077677f.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To use nodejs on the host (independant of the actual system) to create
some static files to place onto the target rootfs nodejs can be very
helpful.
The provided nodejs package didn't expose the possibility to create a
host package, which this commit adds.
This patch contains fixes based on feedback from:
- Peter Seiderer <ps.report@gmx.net>
- Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Linus Kaschulla <linus@cosmos-ink.net>
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package provides a set of tools originally developed for the
OpenWrt project. They allow working with various firmware formats that
are required for flashing new images on embedded devices.
One of tools (mkhilinkfw) depends on OpenSSL and doesn't support any
other SSL library (like wolfSSL) directly. It can be used with wolfSSL
using its compatibility layer though.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
[Arnout: add comment about missing license files]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
sloci-image is a simple CLI tool for packing rootfs into a single-layer
OCI image.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Matthew Weber <matthew.weber@collins.com>
[Arnout: correctly set PREFIX, add Matt to DEVELOPERS, add additional
patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This package has had build failures for a very long time, and these
issues have not been fixed, and it is now the number 1 build failure
reason in our autobuilders. It is time to acknowledge that the package
needs to be removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
bmaptool allows to drastically reduce the amount of data to transfer
when writing to an SD card. Example with a 544 MiB sdcard.img:
$ bmaptool create sdcard.img > sdcard.bmap
$ gzip sdcard.img
$ bmaptool copy sdcard.img.gz /dev/sdc
bmaptool: info: discovered bmap file 'sdcard.bmap'
bmaptool: info: block map format version 2.0
bmaptool: info: 139265 blocks of size 4096 (544.0 MiB), mapped 23918 blocks (93.4 MiB or 17.2%)
bmaptool: info: copying image 'sdcard.img.gz' to block device '/dev/sdc' using bmap file 'sdcard.bmap'
bmaptool: info: 100% copied
bmaptool: info: synchronizing '/dev/sdc'
bmaptool: info: copying time: 7.7s, copying speed 12.1 MiB/sec
So it means that instead of writing 544 MiB, only 93.4 MiB had to be
written.
In terms of implementation details, compared to the target bmap-tools
package, there are fewer "selects" that are needed because:
- The dependency on setuptools is not needed, because the package
uses the setuptools SETUP_TYPE, so host-python-setuptools is
already a build dependency.
- host-python and host-python3 are always built with Expat XML
support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add jh71xx-tools as a new host package, it includes a tool that allows
to recover the bootloader of JH71xx-based platforms, such as the
BeagleV.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[yann.morin.1998@free.fr:
- fix alphabetical order, spotted by Bin
- use LICENSE as license file, update license hash accordingly
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is really only for QoriQ SoCs. Also the upstream package - despite
its base name of the git repository - is "qoriq-components/rcw". Thus
rename it to a more specify package name.
Note that there are other rcw implementations for other platforms, and
each implementation only applies to that specific platform; it hus does
not make sense that there are more than one rcw enabled at the same
time; so we keep using /usr/share/rcw as the install location; this also
help backward compatibility with existing post-build scripts.
Signed-off-by: Changming Huang <jerry.huang@nxp.com>
Cc: Michael Walle <michael@walle.cc>
[yann.morin.1998@free.fr:
- rebase on master
- incorporate changes by Michael
- don't move to an 'nxp' sub-directory
- reword the legacy entry; select the new package
- expand commit log to explain why we keep installing in
host/usr/share/rcw/ (thanks to Michael for prompting that)
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Enabling package host build for abootimg so that boot images can be
created for boards which boot from this format.
Signed-off-by: Mike Frampton <mikeframpo@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Install an helper script to setup a build environment based on
Buildroot. It's useful when a developer wants to use a Buildroot
generated SDK to build an external project.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Tested-by: Michael Trimarchi <michael@amarulasolutions.com>
Tested-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Maury Anderson <maury.anderson@collins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Curently, host-kmod has no option to enable it, because only
the kernel depends on it, and this is unconditional (because
we can't know if modules will be enabled in the kernel config).
But we're soon to add options to enable various features of
kmod, so we'll need a place where to show those features.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Lucian Buga <lucianbuga@gmail.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The asn1c is a free, open source compiler of ASN.1 specifications into C
source code.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Babeltrace 2 is a trace manipulation toolkit.
The Babeltrace 2 project offers a library with a C API, Python 3
bindings, and a command-line tool which makes it very easy for mere
mortals to view, convert, transform, and analyze traces.
See <https://babeltrace.org/> for more details.
Babeltrace 2 is a major update of Babeltrace 1 (Buildroot package
`lttng-babeltrace`). Both projects are coinstallable. Except for the
command-line tool (named `babeltrace2`), the Babeltrace 2 project is not
backward compatible with Babeltrace 1.
I'm naming this package `babeltrace2` instead of `lttng-babeltrace2`
because, although it can read LTTng traces, the two projects are
independent. All major distributions use `babeltrace2` as the
Babeltrace 2 package's name.
I'm keeping the `lttng-babeltrace` package because, as of this date, we
still add bug and security fixes from time to time, therefore the
project is not in EOL stage. Some external, custom packages could still
depend on the Babeltrace 1 library, for example.
As with `lttng-babeltrace`, you can build and install the host version
of Babeltrace 2 for the workflow where you trace the target, download
the resulting trace (or receive it during the tracing process), and then
read and analyze it with Babeltrace 2.
If you enable the `elfutils` package (`BR2_PACKAGE_ELFUTILS`), then
support for Babeltrace 2's debugging information filter component
class is enabled.
Tested with glibc, uClibc-ng, and musl.
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As no package depends on the standalone cargo package, it can be
dropped.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: David Pierret <david.pierret@smile.fr>
Tested-by: David Pierret <david.pierret@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ODB is an open-source, cross-platform, and cross-database
object-relational mapping (ORM) system for C++. It allows you to
persist C++ objects to a relational database without having to deal
with tables, columns, or SQL and without manually writing any mapping
code.
ODB supports MySQL, SQLite, PostgreSQL, Oracle, and Microsoft SQL
Server relational databases as well as C++98/03 and C++11 language
standards. It also comes with optional profiles for Boost and Qt
which allow you to seamlessly use value types, containers, and smart
pointers from these libraries in your persistent C++ classes.
This package is used for auto-generating ODB specific header files
into useable code that can be linked against a seperate libodb and a
specific libodb database library. As such, it is only needed as a
host program and is not user selectable.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[Kamel: Fix incorrect odb license]
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
[Thomas: add patch fixing gcc10 build, add references to upstream
commits]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
exFAT filesystem userspace utilities
We need a patch to fix:
error: unknown type name ‘ssize_t’
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds EROFS userspace tool erofs-utils to buildroot,
which can be used to generate EROFS images.
Signed-off-by: Gao Xiang <hsiangkao@aol.com>
[yann.morin.1998@free.fr:
- add explicit --enable-lz4
- explain why autoreconf
- add DEVELOPPER entry
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
