Following the switch to Glibc as the default libc in Buildroot [1],
all defconfigs expecting uClibc with wchar (or any other uClibc
specific option) should now select BR2_TOOLCHAIN_BUILDROOT_UCLIBC too.
Even if all defconfigs has been tested with uClibc, maintainers
prefer to not enforce a C library and use the default of Buildroot,
which is now glibc.
This commit remove uClibc specific options BR2_TOOLCHAIN_BUILDROOT_WCHAR,
BR2_PTHREAD_DEBUG (required by gdb) and BR2_TOOLCHAIN_BUILDROOT_USE_SSP.
Since glibc always has argp built-in, also remove the standalone one
from affected toolchains...
Fixes:
https://gitlab.com/kubu93/buildroot/-/jobs/2911738579
[1] 4057e36ca9
[2] http://lists.busybox.net/pipermail/buildroot/2022-August/649998.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[yann.morin.1998@free.fr: also drop argp-standalone]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The update to wilc-firmware added firmware files for WILC3000
devices as a separate config option. All Atmel/Microchip defconfigs
that previously only had WILC1000_FIRMWARE either have WILC3000
Wi-Fi hardware (WILC3000 is the same silicon but with BLE added)
or have the capacity to have either WILC1000 or WILC3000 devices
added to the system. Install all firmware blobs to these devices
by default.
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump the AT91BOOTSTRAP bootloader package to new released version 4.0.1
for all the supported boards (SAMA boards + SAM9X60).
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Linux4sam has moved to linux4microchip.
First linux4microchip release for the SAMA & SAM9X60 boards is
linux4microchip 2021.10.
Bump all boards to use this kernel version.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 61a813339a (package/bluez_utils: drop package) removed
bluez-utils, but forgot to update the defconfigs. Fix them by changing to
bluez5-utils instead.
Fixes https://gitlab.com/buildroot.org/buildroot/-/jobs/451176867 and many
others.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The function was wrong, missing '$', and we also fix the filename,
which was prefixed at91bootstrap and not at91bootstrap3 as it should
have been.
Fixes: 8064095332 ("configs/atmel: use tarballs to fetch U-Boot and at91bootstrap")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use tarballs for U-Boot and at91bootstrap instead of cloning the
repositories.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update configs with latest linux4sam and at91bootstrap.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It is not used by any other application selected by those defconfigs.
Tested building all boards and searching recursively for devmem2 in the
target directory.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit df7005975e, the linux
configuration requires host-openssl to be built.
Reported-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Only the atmel_sama5d27_som1 board was bumped to linux4sam_6.1 so update
the other boards.
Moreover, display variant device trees are no longer in the linux4sam
kernel tree as we have adopted the DT overlays. In case of interest for those
DTs, please use the Microchip external available here:
https://github.com/linux4sam/buildroot-external-microchip
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The default of 60 MB is no longer sufficient to contain all the tools
enabled in this "development" defconfig, so let's increase the ext4
image size to 120 MB.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/199339417
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The "development" defconfigs for Atmel platforms enable both OpenSSH
and Dropbear, which doesn't make a lot of sense, as only one SSH
server can start on port 22.
This commit therefore drops BR2_PACKAGE_DROPBEAR=y from those
defconfigs, keeping OpenSSH as an SSH server/client, as was requested
by Atmel/Microchip folks in the review of an earlier version of this
patch [1]. Since those defconfigs are "development" defconfigs, they
are not meant to be minimal, and already provide an arbitrary set of
packages, so using openssh is just as good as using dropbear in this
case.
[1] https://patchwork.ozlabs.org/patch/989516/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Joshua Henderson <joshua.henderson@microchip.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The linux git trees on github can be huge, and takes a long time to
download, which is not very nice nor convenient for newcomers.
Switch them to using a wget, with the github macro.
A nice side effect of this conversion, is that we no longer need to wait
for the git clone to finish to notice that the ref is gone; doing a wget
will instantly fail in that case.
Mechanical patch, obtained by running (hang-on tight):
$ sed -r -i -e 's/BR2_LINUX_KERNEL_CUSTOM_GIT/BR2_LINUX_KERNEL_CUSTOM_TARBALL/; /BR2_LINUX_KERNEL_CUSTOM_REPO_URL/N; s:BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https\://github.com/([^/]+)/(.+)"\nBR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="(.+)":BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,\1,\2,\3)/linux-\3.tar.gz":; s/(call github.*)\.git/\1/;' $(grep -l 'BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com' configs/*)
olimex_a20_olinuxino_lime_mali had a comment in between, so it was
manually fixed thereafter; that comment was also moved.
Except for socrates_cyclone5 which did not work previously (missing tag
in git tree?), all the affected defconfigs still download their sources.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump at91sam9x5ek, atmel_sama5d27_som1_ek, atmel_sama5d2_xplained,
atmel_sama5d3_xplained, and atmel_sama5d4_xplained all variants to
linux4sam_5.8. The 3 foundation components have their tags changed
(AT91Bootstrap, U-Boot, Linux kernel).
at91bootstrap 3.8.10 is required to support gcc7.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump at91sam9x5ek, atmel_sama5d2_xplained, atmel_sama5d3_xplained and
atmel_sama5d4_xplained all variants to linux4sam_5.7. The 3 foundation
components have their tags changed (AT91Bootstrap, U-Boot, Linux kernel).
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the bump of the Atmel defconfigs to linux4sam_5.6 in commit
0f7b5d4a9f, the new U-Boot version uses
the Device Tree compiler, so we need to add BR2_TARGET_UBOOT_NEEDS_DTC
in order to build dtc before u-boot and avoid build failures.
Fixes:
>>> uboot linux4sam_5.6 Configuring
>>> uboot linux4sam_5.6 Building
[...]
CHK include/generated/timestamp_autogenerated.h
UPD include/generated/timestamp_autogenerated.h
./scripts/dtc-version.sh: line 17: dtc: command not found
./scripts/dtc-version.sh: line 18: dtc: command not found
*** Your dtc is too old, please upgrade to dtc 1.4 or newer
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump at91bootstrap to v3.8.7, U-Boot to linux4sam_5.5, Linux to linux4sam_5.5
(based on v4.4.x).
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This development defconfig provides tools to test features of the SoC.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
