The new version of the lua-periphery LuaRocks package handles fetching the
c-periphery dependency, so that it no longer needs to be cloned during the
lua-periphery build process. Consequently, this removes the need for selecting
c-periphery as a package dependency in buildroot and the need for the patches
that modify lua-periphery to be built against an external c-periphery.
[Thomas:
- remove dependency from .mk file, as noticed by Baruch
- add patch to fix uClibc build]
Signed-off-by: Vanya Sergeev <vsergeev@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
configure.ac does not contain PKG_CHECK_MODULES anymore.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now with local header for tipc support on older kernels.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
>From [1]:
- tools: widen frequency resolution to µs in the DPI tool
- tools: complain about devices that don't have abs x/y axes in the edge detector
- include: update to 4.1 header
[1] http://lists.freedesktop.org/archives/input-tools/2015-June/001171.html
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This allows usage of the filter-aaaa-on-v4 configuration option.
This option disables responding with AAAA records when the request
is made over ipv4. This may be useful on networks with
ipv6 inside, but no ISP ipv6 (when combined with only
listening on ipv4).
See https://kb.isc.org/article/AA-00576/
Filter-AAAA-option-in-BIND-9-.html
for more information.
Signed-off-by: Nathaniel Roach <nroach44@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If the libtool used by the package is 2.4 (i.e. with no patchlevel), we
end up with error messages like this one, seen when building ntp-4.2.8p3:
/bin/sh: line 0: test: 2.4: integer expression expected
That's because the current sed expression "[0-9].[0-9]." only deletes content
like "2.4.", so it leaves "2.4" (no patch level *and* no second period) intact,
resulting in an ltmain_patchlevel of "2.4", not empty, and not "0". Then the
shell line goes bad, because the built in shell test -gt operates on integers
only, and fails on floating point numbers (like "2.4").
Additionally, the existing sed lines are problematic in other ways, because the
current expression "[0-9].[0-9]" will match "234" as well as "2.4", as an unescaped
period matches any character, not just a period. Also, the lack of an asterisk
after the first character may be a problem in the future, if a two digit initial
number is used.
So, this patch changes the sed regex as follows:
* Match a string of digits when searching for a number. I.e. "[0-9]*"
* Match specifically a period in between two numbers. I.e. "\."
* When searching for a patch level, make the second period optional. I.e. "\.*"
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Compile fails
make[4]: Entering directory `/home/fli4l/br6_freeswitch/output/build/vlc-2.2.1/modules'
CC video_chroma/libi420_yuy2_sse2_plugin_la-i420_yuy2.lo
In file included from video_chroma/i420_yuy2.c:35:0:
video_chroma/i420_yuy2.c: In function 'I420_UYVY_Filter':
video_chroma/i420_yuy2.c:194:23: error: calling 'I420_UYVY.isra.2' with SSE caling convention without SSE/SSE2 enabled
VIDEO_FILTER_WRAPPER( I420_UYVY )
^
../include/vlc_filter.h:266:13: note: in definition of macro 'VIDEO_FILTER_WRAPPER'
name( p_filter, p_pic, p_outpic ); \
using this defconfig
BR2_x86_pentium2=y
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_GCC_VERSION_5_1_X=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_VLC=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A new --without-gnutls option has been added to configure, so let's use
it in order to enable or disable gnutls support in squid.
Related:
http://www.squid-cache.org/Versions/v3/3.5/squid-3.5.6-RELEASENOTES.html#ss4.1
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In BerkeleyDB the most convenient implementation of mutexes on Linux is
via POSIX mutex, and that requires pthread library.
Still it is possible to build (and hopefully use) BerkeleyDB without
mutexes. For this we pass "--disable-mutexsupport" during configuration
of the package.
Fixes:
http://autobuild.buildroot.net/results/717f3b37600a56262badc6f7cb64d7949fdacb67/http://autobuild.buildroot.net/results/80ebf0382992b277fd94743815bbf0c7426a3654/
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that building the openssl binary without MMU is supported, the only
reason left for not building apps if the openssl binary is disabled is
to save build time. Moreover, the commit
720893b625 "openssl: disable apps for
NOMMU", which added this behavior, had a side effect: the scripts from
apps (CA.pl, CA.sh and tsget) and the default configuration file
(openssl.cnf) were no longer installed, which is not advertized by the
BR2_PACKAGE_OPENSSL_BIN option. CA.pl and CA.sh use the openssl binary,
so not installing them without the latter makes sense. But tsget does
not use the openssl binary, and openssl.cnf can be used by libcrypto, so
it is preferable to handle BR2_PACKAGE_OPENSSL_BIN like before the
commit mentioned above, i.e. to always build and install apps and to
just remove the openssl binary afterwards if needed.
This is what the current commit does, but installing only the helper
scripts having their dependencies (perl or the openssl binary)
satisfied. The help text is updated accordingly.
Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For version 5.5.x a reorganization was made and some common funtionality
was moved to libraries, however proper dependency accounting isn't
handled in the Makefile thus causing build breakage on some parallel
builds. Fixes:
http://autobuild.buildroot.net/results/a5e/a5e6891e9ea66ac8216d3302da3702770ef7247b/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch bumps to version 0.1.100, removes the no more
neded upstream included patch and adds the ENABLE_DKMS=OFF
configure option.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adding extended attribute support for the mtd tools when the attr
package is selected. This is needed for SELinux support.
Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We can delete the patch, as it was integrated upstream.
Signed-off-by: Simon Marchi <simon.marchi@polymtl.ca>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In OpenCV, OpenGL is only used by highgui module.
OpenGL support is done using extensions from 3rd party framework: either
Qt5OpenGL with Qt5 (with GL support only, not GLES); or gtkglext (which
is not available in Buildroot) with gtk2
So, make OpenGL knob a sub-option of the Qt5 support option.
Note: we enclose both the GUI toolkit choice and the GL option in an
if-block, so that the GL option gets properly indented; having it
depend on WITH_QT5 is not enough, because it does not directly follow
it, so kconfig would not consider it for indenting.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[yann.morin.1998@free.fr: tweak commit log about the if-block]
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
OpenCV now also supports gtk3 as a GUI toolkit, in addition to gtk2,
but only one may be enabled at a time.
So, add gtk3 in the choice to select the GUI toolkit.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[yann.morin.1998@free.fr: drop the superfluous depends-on for the
kconfig symbol, since they're no longer needed now we depend-on rather
than select]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Starting with the 2.4.6 release, OpenCV supports either Qt4 or Qt5 as GUI
toolkit, so add Qt5 in the GUI toolkit choice.
When Qt4 is enabled (and thus Qt5 is hidden and disabled), no need to
show a comment stating "Qt5 support needs Qt5", because Qt5 is not
selectable.
Conversely, when Qt5 is enabled and Qt4 is not, then no need to show a
comment stating "Qt4 support needs Qt4", because enabling Qt4 would
disable Qt5.
So, we only show the comments when neither toolkit is enabled.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: split-out the Qt5 hunk from the
switch-selects-to-depends hunk]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we only support either Qt4 or gtk2, but OpenCV also
additionally supports Qt5 or gtk3, making for a choice of four
toolkits, one of: Qt4, Qt5, gtk3, gtk2 (and obviously, none).
Since Buildroot does not support coexistence of Qt4 and Qt5, we
can no longer select one and depend on the other, like so:
config BR2_PKG_OCV_WITH_QT4
bool "Qt4"
depends on !BR2_PKG_QT5
select BR2_PKG_QT
config BR2_PKG_OCV_WITH_QT5
bool "Qt5"
depends on !BR2_PKG_QT
select BR2_PKG_QT5
otherwise, we'd get a circular dependency chain in Kconfig, which would
complain with:
package/opencv/Config.in:57:error: recursive dependency detected!
package/opencv/Config.in:57: choice <choice> contains symbol BR2_PKG_OCV_WITH_QT5
package/opencv/Config.in:111: symbol BR2_PKG_OCV_WITH_QT5 depends on BR2_PKG_QT
package/qt/Config.in:5: symbol BR2_PKG_QT is selected by BR2_PKG_OCV_WITH_QT
package/opencv/Config.in:98: symbol BR2_PKG_OCV_WITH_QT is part of choice <choice>
Instead, we need to depend on either Qt version.
So, to have a consistent choice, we make all support for GUI toolkits
actually depend on the toolkit, rather than select it.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[yann.morin.1998@free.fr: split-out the switch-selects-to-depends hunk
from the add-qt5 hunk]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In OpenCV, only one GUI toolkit may be used at any one time, so group
the two existing options into a choice to make this situation explicit.
This will also be useful when we later add support for Qt5 and gtk3.
Suggested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[yann.morin.1998@free.fr: tweak commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop the minor version from the Kconfig symbol, so we can seamlessly
update the versions without having to handle legacy stuff.
Note: not adding legacy handling, as we haven't had any release with
those symbols yet.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Chris Becker <goabonga@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
refclock_pcf.c contains code using the tm_gmtoff member of struct tm, which
is only available on uClibc if it is built with __UCLIBC_HAS_TM_EXTENSIONS__.
This change date back to:
commit 7129da009c
Author: Eric Andersen <andersen@codepoet.org>
Date: Sat Jan 18 21:27:22 2003 +0000
Merge a bunch of stuff over from the tuxscreen buildroot, with
many updates to make things be more consistant.
-Erik
But nowadays our uClibc configs DO enable __UCLIBC_HAS_TM_EXTENSIONS__, so
it is no longer needed and can be dropped.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop sed line which no longer changes anything as upstream has changed to
use strrchr. Worse, it bumps each ntpd/*.c file's modification time, which
sometimes triggers a strange dependency path causing the makefile to attempt
to run the ntpd keyword-gen app, which fails, because it's been
cross-compiled.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If sane is installed system-wide on the build machine, then the
sane-config binary found is the one of the system, which returns
incorrect library paths for cross-compilation.
To fix this, this commit adds a patch to wine to make it support a
SANE_CONFIG environment variable, and then adjusts wine.mk to
explicitly pass the path to $(STAGING_DIR)/usr/bin/sane-config.
Fixes:
http://autobuild.buildroot.org/results/8bd/8bdc1eed55075313403aa8a6c9af6a427bce198e/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The package comes with usable .service files for smbd, nmbd and
winbind, but does not install them.
[Thomas: use relative paths for the symbolic links.]
Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
squid comes with a .service file, but does not install it.
[Thomas: use relative path for symlink instead of absolute path.]
Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Usable .service file is provided in the package.
Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change adds 2 patches (backported from upstream) to vlc fixing the
build against opencv2 APIs.
This allows to select the minimal set of opencv modules when opencv
support is enabled.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Starting with the 2.4.10 release, OpenCV supports both Gstreamer-0.10
and Gstreamer-1, but only one can be enabled at the same time (OpenCV
chooses Gstreamer-1 over Gstreamer-0.10 when both are available).
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
OpenCV 3.0 support both gstreamer-0.10 and gstreamer-1.x, but only one
is used at the time.
This patch turns the gstreamer support into a choice, in order to prepare
adding the support for gstreamer-1 in a following patch.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In file included from libavcodec/cabac_functions.h:46:0,
from libavcodec/h264_cabac.c:37:
libavcodec/h264_cabac.c: In function 'ff_h264_decode_mb_cabac':
libavcodec/x86/cabac.h:192:5: error: 'asm' operand has impossible constraints
__asm__ volatile(
To reproduce the bug use this defconfig:
BR2_GCC_VERSION_5_1_X=y
BR2_PACKAGE_FFMPEG=y
BR2_PACKAGE_FFMPEG_GPL=y
BR2_PACKAGE_FFMPEG_NONFREE=y
BR2_PACKAGE_FFMPEG_FFPLAY=y
BR2_PACKAGE_FFMPEG_FFSERVER=y
BR2_PACKAGE_FFMPEG_FFPROBE=y
BR2_PACKAGE_FFMPEG_AVRESAMPLE=y
BR2_PACKAGE_FFMPEG_POSTPROC=y
[Thomas: add a comment in the code.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit f21b2558a0 ("busybox: added
linux-pam support"), we added optional support for PAM in
Busybox. However, this support requires the toolchain to have thread
support, which causes build failures with non-thread capable
toolchains.
This commit therefore enables Busybox PAM support only if the
linux-pam package is available *and the toolchain has thread support.
Fixes:
http://autobuild.buildroot.org/results/1a3/1a380aaca9303b67cc59165d56cf12f35966fe26/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In case FOO_OVERRIDE_SRCDIR has trailing spaces, like so:
FOO_OVERRIDE_SRCDIR = /path/to/sources\x20
we would end up with a rsync command like so:
rsync -au /path/to/sources / /path/to/build/foo
which would effectively rsync the whole vfs, eventually filling the
whole disk... :-(
So, just qstrip the variable before use.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the *-install-target phase the manifest file is being updated, if multiply packages try to update it they fail.
To avoid multiple access to the manifest file use flock to sync
multiple luarocks packages.
e.g. installing three luarocks packages:
make lua-cjson-build lua-coat-build lua-coatpersistent-build
make lua-cjson lua-coat lua-coatpersistent -j
Fix error:
Updating manifest for /home/tetsuya/buildroot/br2/output/target/usr/lib/luarocks/rocks
No existing manifest. Attempting to rebuild...
Error: rock_manifest file not found for lua-coat 0.9.1-1 - not a LuaRocks 2 tree?
[Thomas: get rid of LUAROCKS_RUN, and use LUAROCKS_RUN_ENV +
LUAROCKS_RUN_CMD everywhere.]
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The boost and jack2 packages fail to build when PARALLEL_JOBS is empty
so instead of using an empty PARALLEL_JOBS don't use it in the MAKE
variable when top-level parallel make is being used.
To simplify the use of top-level parallel make, check the MAKEFLAGS
variable to know automatically if the -j option is being used, also use
the "=" operator instead of the ":=" operator because the MAKEFLAGS
variable can be checked only in a "recursively expanded variable".
The "override" keyword must be used in order to change the automatic
variable "MAKE".
When the top-parallel make is being used the sub-make are called without
specifying the "-j" option in order to let GNU make share the job slots
specified in the top make. This is done because GNU make is able
to share the job slots available between each instance of make so if you
want to increase the number of jobs you just need to increase the <jobs>
value in the top make -j<jobs> command.
If we specify the -j<jobs> option in each instance of make, it is less
efficient, e.g. in a processor with 8 cores we specify -j9 in each instance:
the number of processes goes up to 81 because each sub-make can execute
9 processes. The excessive number of processes is not a good thing
because in my tests even -j16 is slower than -j9.
Instead if we don't specify the -j<jobs> option in the sub-make, the top
make share the job slots automatically between each instance, so the
number of process in this examples goes up to 9 that is faster than
using up to 81 processes.
e.g. when the -j3 option is specified only in the top make:
possible state n. 1:
process 1 - <packagea>-build
process 2 - <packagea>-build
process 3 - <packagea>-build
possible state n. 2:
process 1 - <packagea>-extract
process 2 - <packageb>-configure
process 3 - <packagec>-build
possible state n. 3:
process 1 - <packagea>-build make -j1
process 2 - <packageb>-build make -j1
process 3 - <packagec>-build make -j1
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
