Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
[run-tested on i.MX6Q SabreSD, build-tested only for other configs]
Tested-by: Stephane Viau <stephane.viau@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot and Linux kernel versions. Fix recent build failures caused
by mv-ddr-marvell package update. Marvell ATF does not provide a version
compatible with up-to-date mv-ddr-marvell. According to commit log,
Marvell developers are now contributing directly to upstream ATF. So
switch to upstream ATF instead of using older Marvell ATF versions.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/938922500
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Hard-float support is pretty stable, so make that default for HSDK
boards.
The hard-float setting is a bit convulated since current ARC gcc lacks
--with-fpu - so this is done with BR2_TARGET_OPTIMIZATION
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
[yann.morin.1998@free.fr: split off into its own commit]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We are no longer actively working on uClibc, so make that default
for HSDK boards.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
[yann.morin.1998@free.fr: drop enabling hard float]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
No config changes done
| make snps_archs38_hsdk_defconfig
| make savedefconfig
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Integrate the RCW into the storage device image, so the image can also
be used a boot source. The SoC expects the RCW at offset 4096 of the SD
card or eMMC.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Enable building of the bootloader and integrate it into the resulting
image.
Signed-off-by: Michael Walle <michael@walle.cc>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump QEMU defconfigs to latest longterm kernel 5.4.88.
Please note that QEMU boards not based on 5.4.y were ignored:
- qemu_csky810_virt_defconfig
- qemu_csky807_virt_defconfig
- qemu_csky610_virt_defconfig
- qemu_csky860_virt_defconfig
Tests were carried out on all QEMU boards using Gitlab [1] (commit
message was slightly different, but the patch is identical)
Additional actions needed were:
- board/qemu/sh4-r2d: Remove one of the two kernel patches [2] provided
by Alan Modra fixing rodata alignment, carried here by Romain Naour [3]
to fix an issue preventing kernel from booting with binutils 2.23.
Patch is present in upstream Linux now.
[1] https://gitlab.com/clumsyape/buildroot/-/pipelines/239483891
[2] https://www.sourceware.org/ml/binutils/2019-12/msg00112.html
[3] https://git.busybox.net/buildroot/commit/?id=a2331c8a61bdd71c47492efc818fb0458a349219
Signed-off-by: Geoffrey Le Gourriérec <geoffrey.legourrierec@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to upstream ATF of recent version to fix build with recently
updated mv-ddr. The vendor does not provide public access to newer ATF
versions anymore.
Bump U-Boot and kernel to fix dtc build on hosts with gcc 10.
Increase rootfs size. The default 60MB is not enough.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/948622614
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add the new SAM9X60 Evaluation Kit with linux4sam_2020.04
components. Update README file with new defconfigs.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Re-introduced rock64_defconfig which was dropped by commit
a5fa2469e6 ('Revert
"configs/rock64_defconfig: remove defconfig"').
Signed-off-by: Min Xu <xuminready@gmail.com>
Tested-by: Michał Łyszczek <michal.lyszczek@bofc.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- U-Boot branch boundary-imx_v2020.10 from our repo
- Also bump ATF to boundary-imx_5.4.47_2.2.0 for i.MX8*
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Based upon NXP 5.4.47_2.2.0 release
- Integrated stable fixes up to 5.4.80
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
[Build- and run-tested on i.MX8QM MEK]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
[Build- and run-tested on i.MX8MQ EVK]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
[Build- and run-tested on i.MX8MN DDR4 EVK]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
[run-tested on i.MX6Q SabreSD, build-tested only for other configs]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now based on 5.10.1 (from 5.4.80).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The commit [1] added this option a second time.
Remove the first occurence.
Fixes:
configs/nitrogen6x_defconfig:31:warning: override: reassigning to symbol BR2_PACKAGE_HOST_UBOOT_TOOLS
[1] 6ea9f662a0
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use linux headers same as kernel (5.9 series).
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/917539050
Incorrect selection of kernel headers: expected 5.10.x, got 5.9.x
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
weston does not work on the ti-sgx SDK, so switch to using KMS directly,
and drop the wayland-related config options.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr: split into its own patch]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When tags was added by commit 011206b2bf
to detect the qemu command line, the qemu_arm_vexpress_tz_defconfig
was ignored due to a build issue.
This build issue has been fixed by previous patches, so we can
enable the runtime testing by adding the tag in the readme.txt
and the post-image script in the defconfig.
Since Qemu from HOST_DIR is now executed directly from BINARIES_DIR,
we can remove all the string before "qemu-system-*".
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Bump to the latest kernel v5.9.11 and require openssl.
- Switch to PSCI for bringing up the secondary CPUs.
- Switch to GICv3.
- Update the instruction in the readme.txt to use the latest FVP v8
Foundation Platform 11.12 build 38, and to start 4 cores in SMP.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump Linux kernel to 5.9.11 and U-Boot to 2020.10.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump Linux kernel version to 5.9.11.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since Qemu 5.1, this defconfig doesn't boot due to the to small SD card image size (60MB).
qemu-system-arm: sd_init failed: Invalid SD card size: 60 MiB
SD card size has to be a power of 2, e.g. 64 MiB.
You can resize disk images with 'qemu-img resize <imagefile> <new-size>'
(note that this will lose data if you make the image smaller than it currently is).
qemu-system-arm: sd_init failed
From [1]:
"While the possibility to use small SD card images has been seen as
a feature, it became a bug with CVE-2020-13253, where the guest is
able to do OOB read/write accesses past the image size end."
The qemu_arm_vexpress_tz_defconfig doesn't trigger such issue since
it doesn't use the same filesystem support (i.e doesn't use
-drive file=output/images/rootfs.ext2,if=sd,format=raw).
Fixes:
https://gitlab.com/kubu93/buildroot/-/jobs/766482935
[1] https://git.qemu.org/?p=qemu.git;a=commitdiff;h=a9bcedd15a5834ca9ae6c3a97933e85ac7edbd36
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
qemu_arm_versatile doesn't use SD card interface but SCSI, so there is no
need to increase the image size.
The change was for qemu_arm_vexpress_defconfig instead (notice the
name of the defconfig used in gitlab).
This reverts commit cb62a8e0a2.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Select BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y to fix the following
build error:
scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory
#include <openssl/bio.h>
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/831421064
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Tested-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Select BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y to fix the following
build error:
scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory
#include <openssl/bio.h>
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/831421063
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Tested-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
New U-Boot versions (such as 2020.07 being used) need Python 3.x for
pylibfdt.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/831421210
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
New U-Boot versions (such as 2020.07 being used) need Python 3.x for
pylibfdt.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/831421100
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
New U-Boot versions (such as 2020.10 being used) need Python 3.x for
pylibfdt.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/831421115
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for Orangepi Zero Plus board:
- U-Boot 2020.10
- Linux 5.7.19
- Default packages from buildroot
This patch is based on Orangepi Zero Plus2 board support, so genimage
configuration and description is copy pasted. One difference is that
newer Linux and U-Boot are selected. Another difference is Ethernet
support (Plus) instead of WiFi (Plus2).
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As we are about to bump the optee-test package to 3.11.0, which
requires C++ support, let's enable C++ support in the
qemu_arm_vexpress_tz_defconfig, which uses optee-test.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Broke since introduction of linux kernel series 5.9.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
U-Boot 2020.10 no longer provides boot command in default environment for
Udoo Quad/Dual board. Boot script needs to be added to the image. In order
to keep using common infrastructure for freescale boards, move boot files
to root filesystem and add boot script there. Also switch Udoo Neo board
to common freescale infrastructure to simplify maintenance.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
After BSP update Udoo Quad/Dual board once again hangs on boot. On a
new kernel disabling CONFIG_USB option is not enough to work around
the troublesome usb host on Udoo Quad/Dual board. So in order to be
future-proof it makes sense to disable usbh1 block in device tree
rather than fine-tune kernel configuration after BSP updates.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump Linux kernel to 5.8.13 and U-Boot to 2020.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump ATF, U-Boot and kernel to the NXP BSP 5.4.24_2.1.0 versions.
On 5.4.24_2.1.0 the revC board is supported by default.
In case an older revB board is used, then the following step in U-Boot is
needed:
=> setenv fdt_file imx8mm-evk-revb.dtb
=> saveenv
=> reset
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump ATF, U-Boot and kernel to the NXP BSP 5.4.24_2.1.0 versions.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When using the imx8 NXP kernel, it is preferred to use the imx_v8_defconfig
instead of the generic arm64 defconfig, as the NXP defconfig selects more
imx8 specific drivers.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use a fixed kernel version to have a reproducible and tested
configuration.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since kernel 5.7 is EOL now, this upgrades it to version 5.8.13.
Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit changes the stm32mp1 configurations to use the TF-A ->
U-Boot boot flow (called "trusted boot flow" by ST) instead of the
U-Boot SPL -> U-Boot boot flow. ST recommands this trusted boot, and
it's also the only one that allows to use the STM32 Cube Programmer
for reflashing devices.
As part of this, the genimage configuration file is now generated, as
it contains some file names that depend on the platform. Removing
partition-type from genimage.cfg is mandatory, since it would cause a
hybrid MBR partition table to be created, which itself would prevent
ATF from finding the ssbl parition.
Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump Linux kernel to 5.8.13 and U-Boot to 2020.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
as the current kernel version used for this board is 5.7,
make sure that the host kernel version is the same to prevent
build failure due to version miss match.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/779210973
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
now, the build requires host-swig
which is given by BR2_TARGET_UBOOT_NEEDS_PYLIBFDT
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Starting with linux kernel v5.9 all required configuration options are
available in the default config.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since 2020.04 version, the enumeration of MMC has changed, so the boot
script must be updated
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the chromebook elm configuration to use v5.9 instead of an
intermediate release candidate.
At the latter stages of the v5.9 release, a patch was added which
broke the Chromebook Elm HDMI. Therefore add a revert patch to get rid
of this problem. The fix (and the revert) are already on the mailing
list (https://lkml.org/lkml/2020/10/10/32) and should become available
with v5.10
Signed-off-by: Bilal Wasim <bilal.wasim@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to 2020.10 and kernel to version 5.8.13
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For defconfigs that create a boot envimage, add the host package
uboot-tools and update the script variable names.
Add BR2_PACKAGE_HOST_UBOOT_TOOLS=y just before the existing
BR2_TARGET_UBOOT_ENVIMAGE option. Note that for the defconfigs that are
not manually formatted (i.e. just the result of 'make savedefconfig'),
this puts them in the wrong place. However, it's easier this way, and
it's more consistent in general to have the definition of the envimage
close to BR2_TARGET_UBOOT itself.
Related to 78559d699a
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
For defconfigs that create a boot script, add the host package
uboot-tools and update the script variable names.
Add BR2_PACKAGE_HOST_UBOOT_TOOLS=y just before the existing
BR2_TARGET_UBOOT_BOOT_SCRIPT option. Note that for the defconfigs that
are not manually formatted (i.e. just the result of 'make
savedefconfig'), this puts them in the wrong place. However, it's easier
this way, and it's more consistent in general to have the definition of
the script close to BR2_TARGET_UBOOT itself.
Special cases:
- nanopi_* had the definition of the _SCRIPT variable in a weird place.
These are moved to close to BR2_TARGET_UBOOT.
- Same for orangepi_plus.
- orangpi_pc_* already had BR2_PACKAGE_HOST_UBOOT_TOOLS=y so it's not
added there.
Related to db2b684126
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since Qemu 5.1, this defconfig doesn't boot due to the to small SD card image size (60MB).
qemu-system-arm: sd_init failed: Invalid SD card size: 60 MiB
SD card size has to be a power of 2, e.g. 64 MiB.
You can resize disk images with 'qemu-img resize <imagefile> <new-size>'
(note that this will lose data if you make the image smaller than it currently is).
qemu-system-arm: sd_init failed
From [1]:
"While the possibility to use small SD card images has been seen as
a feature, it became a bug with CVE-2020-13253, where the guest is
able to do OOB read/write accesses past the image size end."
Fixes:
https://gitlab.com/kubu93/buildroot/-/jobs/766482935
[1] https://git.qemu.org/?p=qemu.git;a=commitdiff;h=a9bcedd15a5834ca9ae6c3a97933e85ac7edbd36
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
[yann.morin.1998@free.fr:
- don't force network range
- don't forward TCP port
- drop post-build script to add tty1
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit adds supports for building buildroot kernel + rootfs
for MT8173 Elm board, also known as Chromebook Elm
(https://www.acer.com/ac/en/US/content/series/acerchromebookr13).
Though Chrome-OS is officially supproted on this board, the
mainline kernel works as well (benchmarks + conformance), and so
the 5.9 kernel is used. As the 5.9 kernel isn't yet released, we
use the 5.9-rc5 for now, which will be up-revd to 5.9 once its
released.
Using the mainline kernel means that we have to apply certain patches
to get the HDMI screen working. These patches are lying in the
"drm-misc-next" list and will make it to the kernel after 5.9. At that
time, we will remove the patches and point Buildroot to use the latest
kernel (hopefully, 5.10).
This commit also adds an ITS file (for creating FIT images), an ARGS
file (for providing kernel args) and a "sign.sh" script to generate
signed kernel images. Though the "sign.sh" is very similar to the
coresponding file under board/chromebook/snow, it cannot be shared
between both boards, as the script requires access to the board
specific its / args file.
Additionally a readme & defconfig is added to help the user get started.
Signed-off-by: Bilal Wasim <bilalwasim676@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The same script is going to be used by the Chromebook Elm to generate
a bootable SD / USB image. Therefore, move the script out of the snow
folder to one level above (board/chromebook/snow -> board/chromebook).
Update the chromebook_snow_defconfig to reflect the new location of
the script.
Signed-off-by: Bilal Wasim <bilalwasim676@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to 2020.07 version and kernel to 5.4.63.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now based on 5.4.61 (from 5.4.51)
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for imx8mqevk_defconfig that allows booting a mainline
kernel.
This defconfig still relies on NXP ATF and U-Boot, but in the long term
the plan is to switch to mainline ATF and U-Boot as well.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Analog audio is enabled by default in sunxi_defconfig since commit 5d2408c6
(ARM: configs: sunxi: Add sun8i analog codec), so drop from fragment.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Brings a number of fixes and audio support. The aarch64 defconfig has
grown, so bump the ext4 size to make it fit.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that upstream supports this board add buildroot support for it,
too.
This supports:
- latest upstream linux kernel. Since the support for this board and
its SoC is still in active development, we want to follow the
upstream kernel releases for now.
- building an image which can be installed to eMMC, SD card or USB
thumb drive.
- upstream u-boot patches are pending, therefore no support for
building a bootloader for now.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Heiko Thiery <heiko.thiery@gmail.com>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit [1] in U-Boot upstrea, there is no necessity to pass extra
metadata_csum option due to changed env location in U-Boot so we can
drop it completely.
[1] 76db1681da52342ca9f4fb7e6787bd83cc82f429:
stm32mp1: use a specific SD/eMMC partition for U-Boot enviromnent
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
[yann.morin.1998@free.fr: 76db1681d referecnes a U-Boot commit]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The custom UBoot version was not correctly specified, causing the latest
one to be selected instead:
/home/ymorin/dev/buildroot/buildroot/configs/odroidc2_defconfig:25:warning:
symbol value '"2020.07"' invalid for BR2_TARGET_UBOOT_CUSTOM_VERSION
Fixes:
https://gitlab.com/ymorin/buildroot/-/jobs/723411844
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that RISC-V 32-bit (RV32) support has been merged into mainline
glibc, we can use the Linux 5.4 kernel.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The apu2 by PC Engines is a 64 bit single board computer with coreboot
BIOS. It only has serial output, but no graphics chip. With its 2–4
ethernet ports, it is often used to build a firewall or router.
The provided defconfig configures busybox and isolinux. It will output
a hybrid ISO image that can be written to a USB stick or burned to a
CD.
Configuration based on a blogpost by Tony Arkles:
http://www.better-bsp.com/blog/2017/03/02/buildrooting-for-apu2/
Signed-off-by: Danilo Bargen <mail@dbrgn.ch>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A defconfig for the friendlyarm nanopc-t4 was added in
c23895f06e, but then removed
in 8efd4463f7 because an ARM32
compiler was needed to build ATF, and this was not supported
back then.
Now, since package/arm-gnu-a-toolchain/ has been added, this
defconfig can be re-introduced.
Following new changes are introduced in comparision with the
older changeset:
- updated readme
- GPT partition layout is being used
- update defconfig to build ATF
- bump u-boot to 2020.07
- bump linux to 5.8.2
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: fixate U-Boot version; remove blind BR2_TARGET_UBOOT_NEEDS_PYTHON]
A defconfig for the friendlyarm nanopi-m4 was added in
493c3979a4, but then removed
in a24bd8936f because an ARM32
compiler was needed to build ATF, and this was not supported
back then.
Now, since package/arm-gnu-a-toolchain/ has been added, this
defconfig can be re-introduced.
Following new changes are introduced in comparision with the
older changeset:
- readme updated
- GPT partition layout
- update defconfig to build ATF
- bump u-boot to 2020.07
- bump linux to 5.8.2
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: fixate U-Boot version; remove blind BR2_TARGET_UBOOT_NEEDS_PYTHON]
A defconfig for the rockpro64 was added in
59e1077b4e, but then removed
in 10f49213b7 because an ARM32
compiler was needed to build ATF, and this was not supported
back then.
Now, since package/arm-gnu-a-toolchain/ has been added, this
defconfig can be re-introduced.
Following new changes are introduced in comparision with the
older changeset:
- renamed defconfig from pine64_rockpro64 to rockpro64
- updated readme
- using a GPT partition layout
- update defconfig to build ATF
- bump u-boot to 2020.07
- bump linux to 5.8.2
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: fixate U-Boot version; remove blind BR2_TARGET_UBOOT_NEEDS_PYTHON]
Mainline Linux now has basic s500/roseapplepi support, so switch to that to
get rid of the dependency on gcc7. Add two patches for the dts / fix that
didn't make it for kernel 5.7.
The mainline kernel does not yet have support for the mmc interface, so
change to initramfs for now. Patches for mmc support have been posted
recently, so this can be reverted once they show up in a stable kernel:
https://lore.kernel.org/lkml/cover.1593124368.git.cristian.ciocaltea@gmail.com/
The owl serial port is called ttyOWLn in mainline, so adjust the bootargs to
match. Also drop the unneeded execute permission on uEnv.txt.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for RK3288 SOM based radxa rockpi-n8
target with below features:
- Custom U-Boot 2020.07-rc4
https://github.com/amarula/u-boot-amarula.git
commit: "ba120841bf40ebaed049d64bb4f980083a1cf6b7"
- Custom Linux 5.7.0-rc1
https://github.com/amarula/linux-amarula.git
commit: "5dcb0132685b07beb82065c5d7521e6c555c55b6"
- GPT partition layout is being used
- Default packages from buildroot
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump configs/qemu_* to latest longterm kernel 5.4.42.
All defconfig using a specific kernel version (csky, risc32) are not
taken into account.
Build and runtime tested: https://gitlab.com/jugurthaB/buildroot/-/pipelines/177882458
Signed-off-by: Jugurtha BELKALEM <jugurtha.belkalem@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/674933582
Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>
Signed-off-by: Oleksandr G Zhadan <Oleks@ArcturusNetworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The vendor kernel we are currently selecting no longer builds,
and fails with a ton of:
from include/linux/list.h:8,
from include/linux/module.h:9,
from arch/mips/jz4740/prom.c:16:
include/linux/log2.h:22:1: error: ignoring attribute 'noreturn' because it conflicts with attribute 'const' [-Werror=a
ttributes]
22 | int ____ilog2_NaN(void);
| ^~~
We can't afford to fix that, so let's just move to upstream
kernel and bootloader. It doesn't make much sense to keep
using an unsupported kernel and bootloader at this point.
This means we will be missing some of the features supported
by the vendor (such as HDMI support), but it is what it is.
Linux v5.7 and v5.4 have been tested to boot fine, the latter
is picked for the defconfig as it is an LTS version.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/674933782
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump to a later version of ATF and cleanup the Python
configuration. Previously this configuration had to work around Python
3 issues with OP-TEE. Now this relies on OP-TEE properly building
itself with host-python3.
Signed-off-by: Dick Olsson <hi@senzilla.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
bluez-utils has been removed, so use bluez5-utils instead for the
microchip_sama5d27-wlsom1_ek_mmc_dev configuration, to avoid a build
failure due to legacy options being selected.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/674934030
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump kernel to version 5.7.10 and U-Boot to 2020.07
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Tested-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump kernel to version 5.7.10 and U-Boot to 2020.07
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_TARGET_UBOOT_NEEDS_PYTHON3 is already selected for
this defconfig, BR2_TARGET_UBOOT_NEEDS_PYTHON and
BR2_TARGET_UBOOT_NEEDS_PYTHON3 can't be selected at the
same time.
Reported by check-dotconfig.py.
Fixes:
https://gitlab.com/kubu93/buildroot/-/jobs/657885314
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
BR2_TARGET_UBOOT_NEEDS_PYTHON3 is already selected for
this defconfig, BR2_TARGET_UBOOT_NEEDS_PYTHON and
BR2_TARGET_UBOOT_NEEDS_PYTHON3 can't be selected at the
same time.
Reported by check-dotconfig.py.
Fixes:
https://gitlab.com/kubu93/buildroot/-/jobs/657885313
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The Banana Pi M2 Zero [1] is a board from Sinovoip, based on the
Allwinner H2+ SoC.
It is similar to the other Banana Pi M2* boards, from which this
configuration is inspired.
[1]: http://www.banana-pi.org/m2z.html
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Basic support for the Marvell ESPRESSObin, by Globalscale Technologies.
http://espressobin.net
The kernel config has been extended with a fragment to enable switchcore
support, DSA drivers, and VLAN filtering in the bridge. To make use of
this you need a custom libnl based application, or the iproute2 suite
rather than the brctl tools, which don't support the VLAN filtering.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- based on NXP imx_5.4.24_2.1.0 release
- includes latest stable releases, hence 5.4.x naming
- includes support for all Boundary Devices platforms + accessories
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for imx6ullevk_defconfig that allows booting a mainline
kernel and mainline U-Boot.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to 2020.07 and kernel to version 5.7.8
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add the new SAMA5D27 WLSOM1 Evaluation Kit with linux4sam_6.2
components. Update README file with new defconfigs and new
packages/website.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for RK3399 based rockpi-4 targets (model A, B, C)
with below features:
- Custom U-Boot 2020.07-rc4
https://github.com/amarula/u-boot-amarula.git
branch rock-pi
- Linux 5.4.46
- GPT partition layout is being used
- Default packages from buildroot
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for RK3399PRO SOM based rockpi-n10 target
with below features:
- Custom U-Boot 2020.07-rc4
https://github.com/amarula/u-boot-amarula.git
branch rock-pi
- Linux 5.7.2
- GPT partition layout is being used
- Default packages from buildroot
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The DDR FW along with all other FW code that need to be used in
bootloader or installed on target are related to the firmware-imx
package.
This patch does this job as well as fixing the conjugation of NEED*s*
in the symbol name. Also take advantage of this patch to make the DDR
FW dependant on BR2_PACKAGE_FIRMWARE_IMX.
In addition, the BR2_PACKAGE_FIRMWARE_DDRFW_* option was incorrect, as
there is no package matching this name. So we rename them to
BR2_PACKAGE_FIRMWARE_IMX_*, and add the appropriate Config.in.legacy
handling.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
Signed-off-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
Signed-off-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
And rebase uboot patch.
Tested-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
[Maeva: Tested on i.MX6Quad SabreAuto CPU1]
Signed-off-by: Julien Olivain <julien.olivain@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 53ced1f6d3 ("linux: allow the selection of the architecture's
default configuration") allows us to specify the Linux defconfig
cleanly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The OpenSBI platform 'qemu/virt' has been removed in v0.8. Builds for
the QEMU 'virt' machine can use the 'generic' platform instead.
Tested with qemu_riscv32_virt_defconfig and
qemu_riscv64_virt_defconfig using Buildroot host-qemu 5.0.0.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The machine has a NAND flash device and firmware capable of loading the
OS from a JFFS2 file system on it. Enable creation of JFFS2 image that
can be written to said flash device.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Orange Pi Zero defconfig has been updated to use U-Boot 2020.04 by
commit 9e2bfccf4d (configs/orangepi_zero: bump kernel and uboot
versions). Since then it requires Python 3.x on the host.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/593313572
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Now based on 4.19.126 (from 4.19.113).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump kernel to version 5.7.1 and U-Boot to 2020.04
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump kernel to version 5.7.1 and U-Boot to 2020.04
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump kernel to version 5.6 and uboot to version 2020.04 for
orangepi-zero configuration
Signed-off-by: Gonçalo Salazar <glbsalazar@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A few conflicts had to be resolved:
- Version number and hash for mesa3d-headers/mesa3d
- Patches added in qemu, and the qemu version number
- The gnuconfig README.buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds support for the i.MX8M Nano EVK Board [1].
The final boot image is created from uboot and firmware binaries in post
image script board/freescale/common/imx/imx8-bootloader-prepare.sh
Note that this config is based on 4.19.35_1.1.0 ; hence, the kernel
configuration needs host-openssl to build.
[1] https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/evaluation-kit-for-the-i-mx-8m-nano-applications-processor:8MNANOD4-EVK
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Reviewed-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
Reviewed-by: Julien Olivain <julien.olivain@oss.nxp.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump U-Boot to 2020.04 and kernel to 5.4.42 versions.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit:
- bump Linux & U-Boot to linux4sam-2020.04
- bump at91bootstrap to v3.9.2
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to 2020.04 and kernel to version 5.6.3
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BR2_LINUX_KERNEL_DTB_OVERLAY_SUPPORT is now forcefully selected by
BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS when the kernel is in
charge of building DTBs (BR2_LINUX_KERNEL_DTS_SUPPORT=y). So enabling
BR2_LINUX_KERNEL_DTB_OVERLAY_SUPPORT is no longer needed in the 64-bit
defconfigs for Raspberry Pi 3 and 4.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In fact, nanopi_neo4 does not need pylibfdt or pyelftools, but only a
host Python interpreter, to run
./arch/arm/mach-rockchip/make_fit_atf.py.
Since upstream U-Boot commit f05d5743567984b4fff6a862fc0f42760ff135da,
this script no longer needs pyelftools. However, since upstream commit
6d06ea34239ab5099783ce588ad4aead96e1fccb (merged in U-Boot 2020.01),
it requires Python 3.x.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: update with the new NEEDS_PYTHON semantics]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In fact, roc_pc_rk3399 does not need pylibfdt or pyelftools, but only
a host Python interpreter, to run
./arch/arm/mach-rockchip/make_fit_atf.py.
Since upstream U-Boot commit f05d5743567984b4fff6a862fc0f42760ff135da,
this script no longer needs pyelftools. However, since upstream commit
6d06ea34239ab5099783ce588ad4aead96e1fccb (merged in U-Boot 2020.01),
it requires Python 3.x.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: update with the new NEEDS_PYTHON semantics]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since the bump to U-Boot 2020.01 in commit
e210080d2a, it needs Python 3.x on the
host.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/535054357
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Clément Péron <peron.clem@gmail.com>
[yann.morin.1998@free.fr: update with the new NEEDS_PYTHON semantics]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Contrary to riscv32, the qemu_riscv64_virt defconfig doesn't needs
any specific change. It could have been updated to Linux 5.4.35 in
the commit 80a044703a.
So, update the kernel version to 5.4.35.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This reverts commit f7a887c368 and
23aee3eac4 since the kernel patch
is not needed as soon as qemu >= 3.1.0 is used with a kernel >=
4.11-rc1.
The qemu emulation of sh-sci driver was fixed by adding basic
timeout handling for 9600 bps [1].
[1] https://git.qemu.org/?p=qemu.git;a=commit;h=71bb4ce1b5592cdc03abc48cdf4ecb15b2db81a0
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Linux version are changed to the new LTS kernel 5.4.35 for all qemu
defconfigs, except for riscv and csky. Thoses defconfigs are left
unchanged because they require either a custom Linux repository
or a specific kernel header version causing some difficulties when
upgrading to 5.4.35.
Update the nios2-10m50 linux.fragment to update the .dtb build directory
due to a change in kernel 4.20 [1]:
nios2: build .dtb files in dts directory
Align nios2 with other architectures which build the dtb files in the
same directory as the dts files. This is also in line with most other
build targets which are located in the same directory as the source.
This move will help enable the 'dtbs' target which builds all the dtbs
regardless of kernel config.
This transition could break some scripts if they expect dtb files in
the old location.
For x86 and x86_64 kernel, add the CONFIG_PCI symbol due a change in kernel
5.0 [2]. The option was previously enabled by default (default y).
PCI: consolidate PCI config entry in drivers/pci
There is no good reason to duplicate the PCI menu in every architecture.
Instead provide a selectable HAVE_PCI symbol that indicates availability
of PCI support, and a FORCE_PCI symbol to for PCI on and the handle the
rest in drivers/pci.
Update the kernel of ppc-mac99 defconfig added in Buildroot 2019.08.
This version bump was tested on gitlab [4] using the newly introduced
boot-qemu-image.py script [5].
[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=118864869805123bf82d666062542440a0fda5dd
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=eb01d42a77785ff96b6e66a2a2e7027fc6d78e4a
[3] a8fac3fcfc
[4] https://gitlab.com/kubu93/buildroot/pipelines/139819874
[5] 0c79350638
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Convert the patch for microblaze kernel added for kernel 3.14 by
Waldemar to git format.
Note: the Waldemar Sob line is missing in the original patch:
fa27985483
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Latest bump introduced a regression for Nitrogen8MM, now fixed.
Changelog:
- Fix Nitrogen8MM SPL regression
- Add multi-rank lpddr4 training support
- Improve fastboot support
- Add Android AVB / BCB support
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/517918160
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Giving an explicit getty port is not really needed, as we already
spawn a getty on the "console" device, which will match the serial
port passed as console= argument on the kernel command line.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This option never existed in opensbi package.
This fixes the new defconfig check.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BR2_SOFT_FLOAT option is lost while loading the defconfig with:
make qemu_ppc_virtex_ml507_defconfig
On powerpc, BR2_POWERPC_SOFT_FLOAT must be used to enable soft
floating point support.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since 2e71b396a1, this defconfig needs
a glibc toolchain to select sunxi-mali-mainline package.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BR2_PACKAGE_GLMARK2 is lost while loading the defconfig with:
make engicam_imx6qdl_icore_qt5_defconfig
In order to select gmark2 package, BR2_PACKAGE_GLMARK2_FLAVOR_ANY option
must be set.
Based on the defconfig without X11 and wayland package, the only missing
option to select BR2_PACKAGE_GLMARK2_FLAVOR_ANY is BR2_PACKAGE_HAS_UDEV.
The only possible option is to enable one of the udev provider
(eudev or systemd). Select eudev package for /dev management.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This option has been removed since 6836f2a70a.
This fixes the new defconfig check.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This defconfig use a custom defconfig file located
in board/friendlyarm/nanopi-r1/uboot/nanopi_r1_defconfig.
BR2_TARGET_UBOOT_BOARD_DEFCONFIG is used to provide the name
of a in-tree defconfig. Since a custom defconfig is used,
this option is lost while loading the defconfig with:
make nanopi_r1_defconfig
This fixes the new defconfig check.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This defconfig loses mesa3d-demo and glmark2 package since commit
5cb821d563 that introduced an
explicit option to enable GLX support.
This fixes the new defconfig check.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The ext4 option is BR2_TARGET_ROOTFS_EXT2_4 not
BR2_TARGET_ROOTFS_EXT_4.
This fixes the new defconfig check.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
board/amarula/a64-relic/readme.txt makes use the host fastboot utility
to flash the board. However, BR2_PACKAGE_HOST_ANDROID_TOOLS_FASTBOOT
(which is enabled in the defconfig) has a dependency on
BR2_PACKAGE_HOST_ANDROID_TOOLS, which is not enabled in the
defconfig. Due to this, BR2_PACKAGE_HOST_ANDROID_TOOLS_FASTBOOT=y is
lost when loading the defconfig.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
[Thomas: change to add BR2_PACKAGE_HOST_ANDROID_TOOLS=y]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch add support for the low cost QMTECH XC7Z010 starter kit
board [1].
[1] http://www.chinaqmtech.com/xilinx_zynq_soc
Signed-off-by: Martin Chabot <martin.chabot@gmail.com>
Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A defconfig for the nanopi_neo4 was added in
d1cd9cdf26, but then removed in
8af7b11bd8 because an ARM32 compiler was
needed to build ATF, and this was not supported back then.
Thanks to the addition of package/arm-gnu-a-toolchain/, we can now
re-introduce this defconfig.
Compared to the previous defconfig, the following changes were done:
- enable BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN
- bump kernel to 5.4
- increase default rootfs size to 70M
- use mainline u-boot
- switch to Marek Belisko as maintainer
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
NXP i.MX8MNano based SBC with 1GB of LPDDR4 and 16GB eMMC.
More details on the platform here:
https://boundarydevices.com/product/nitrogen8m-nano/
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changelog:
- fix serial# variable creation for i.MX8MQ/MM/MN
- improve display selection
- fix fastboot support for boards with 1GB of RAM only
- add BD Nano board support
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changelog:
- fix PMIC issue for i.MX8MMini
- add support for MCP25xxFD SPI to CAN chip
- fix external module build issue for GCC >= 9
- add BD Nano board support
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This defconfig supports the OLPC XO-1 platform.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to 2020.04 and kernel to version 5.6.3
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to version 2020.04 and kernel to 5.6.3.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The support for MacchiatoBin board in U-Boot and Linux has been
significantly improved in the past years. So it no longer makes much
sense to have a separate build configuration based on older vendor
Linux kernel and U-Boot. This commit drops the configuration based on
vendor kernel and U-Boot and renames the mainline-based defconfig.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump Linux to 5.6.3, U-Boot to 2020.01. New kernel and modules based
on arm64 defconfig do not fit into default size filesystem anymore.
So increase filesystem size to 120M.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BR2_TARGET_ROOTFS_EXT2_LABEL now defaults to "rootfs", so repeating
that in those defconfigs is no longer necessary.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for Nanopi R1 board with below features:
- U-Boot 2019.01
- Linux 5.0
- Default packages from buildroot
Configuration files taken from Armbian:
https://github.com/armbian/build/blob/master/patch
Signed-off-by: Davide Viti <zinosat@gmail.com>
[Thomas: move U-Boot config and DT to board/friendlyarm/nanopi-r1/uboot/]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit allow to use the post-image script previously added
for each qemu board.
Add "$(BR2_DEFCONFIG)" as post-image script argument to retried
the qemu command line.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bumping to kernel 5.5 add many new features compare to
the actual 5.3 used on Beelink GS1.
Which are crypto, USB3, GPU, IR, S/PDIF and RTC.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The U-boot patch has been upstreamed.
Bump U-boot version and drop the patch.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The WDT workaround patch has been upstreamed.
Bump to the new ATF version and drop the patch.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Select LIBV4L_UTILS so that camera capture pipelines can be
configured.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that MESA3D_OPENGL_EGL is not automatically selected by the mesa3d
etnaviv driver, explicitly select it in the config file.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that MESA3D_OPENGL_EGL is not automatically selected by the mesa3d
etnaviv driver, explicitly select it in the config file.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With this commit we update for ARC boards Linux kernel
version to 5.6.3 and Linux headers version to 5.6.
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump the kernel to the 5.4.27 version.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
NXP i.MX8MMini based SBC with 2GB of LPDDR4 and 8GB eMMC.
More details on the platform here:
https://boundarydevices.com/product/nitrogen8m-mini
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This initial support includes:
Linux 5.4
U-Boot 2020.01
Arm Trusted Firmware v2.2
Buildroot default packages.
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Disabled creation of u-boot.imx image as it fails, and is not required.
Final boot image is created from uboot binary and firmwares in post image
script board/freescale/common/imx/imx8-bootloader-prepare.sh
With the bump of the kernel to 4.19, the kernel configuration now needs
host-openssl to build.
Tested-by: Julien Olivain <julien.olivain@oss.nxp.com>
Signed-off-by: Laurent GAUTHIER <laurent.gauthier_1@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With the kernel to 4.19, the kernel configuration needs host-openssl
to build.
Fixes:
scripts/extract-cert.c:21:10: fatal error: openssl/bio.h: No such file or directory
21 | #include <openssl/bio.h>
Signed-off-by: Julien Olivain <julien.olivain@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With the recent bump of the kernel to 4.19, the kernel configuration
now needs host-openssl to build.
Fixes:
scripts/extract-cert.c:21:10: fatal error: openssl/bio.h: No such file or directory
21 | #include <openssl/bio.h>
Signed-off-by: Julien Olivain <julien.olivain@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changelog summary:
- Various fixes all over
- Updated LPDDR4 timings for i.MX8M
- Support of UUU recovery tool
- Added support for i.MX8MMini, i.MX8MNano
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The package imx-seco has been added in the defconfigs.
Signed-off-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
Reviewed-by: Julien Olivain <julien.olivain@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Let's clean up "boards/stmicroelectronics" directory a bit
to have everything in particular directories.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The board support package includes the following components:
- U-Boot 2020.01
- Linux 5.4.26
- Buildroot default packages
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It will be useful for the upcoming introducing stm32mp157a dk2 board.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Instead use generic genimage.sh script.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
optee-os needs host-python-pycrypto build for python3. The only way we can
force building host-python modules for python3 is to select python3 package
for the target.
Since we want to avoid adding more host-python3-<modules>
(host-python-pycrypto host-python-pyelftools), select python3 package
even if it's not used.
This problem will be fixed as soon as python2 is removed.
Fixes:
File "scripts/pem_to_pub_c.py", line 24, in main
from Crypto.PublicKey import RSA
ImportError: No module named 'Crypto'
https://gitlab.com/buildroot.org/buildroot/-/jobs/456818689
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to the fix for the base beaglebone defconfig in commit 38912a61be
(configs/beaglebone: kernel builds needs host-openssl), the qt5 variant uses
the same kernel, so also needs host-openssl.
Fixes:
914 scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory
915 #include <openssl/bio.h>
https://gitlab.com/buildroot.org/buildroot/-/jobs/451176891
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 61a813339a (package/bluez_utils: drop package) removed
bluez-utils, but forgot to update the defconfigs. Fix them by changing to
bluez5-utils instead.
Fixes https://gitlab.com/buildroot.org/buildroot/-/jobs/451176867 and many
others.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The current Buildroot defconfigs for qemu_x86 and qemu_x86_64
instantiate a console on tty1, which appears on QEMU's
graphical window. Add a console on the serial port (ttyS0) to
be used later for gitlab testing.
This change is need since the script used for gitlab testing
needs to use a serial output with pexpect.
This change is similar to the one made for raspberrypi [1] to
handle HDMI and serial console:
This requires three changes:
1. have two 'console=' entries in the kernel command line: tty1,
then ttyS0;
2. change BR2_TARGET_GENERIC_GETTY_PORT to "console", so it starts
a getty on the last console= passed to the kernel, ttyS0;
3. add a new getty on tty1 to the generated inittab.
Step 2 is actually obtained by removing BR2_TARGET_GENERIC_GETTY_PORT
entirely from the defconfigs, since "console" is the default value.
Step 3 requires a post-build script since the Buildroot makefiles can
configure only one console.
Note: instead of simply adding a new getty on ttyS0 (which would
work) this patch actually changes BR2_TARGET_GENERIC_GETTY_PORT to
instantiate a console on UART, then adds back tty1 via
post-build.sh. This is done only to avoid the "GENERIC_SERIAL" comment
where we instantiate a console on QEMU graphical window, then
instantiate a really-serial console on another line.
The result is these two inittab lines:
console::respawn:/sbin/getty -L console 0 vt100 # GENERIC_SERIAL
tty1::respawn:/sbin/getty -L tty1 0 vt100 # QEMU graphical window
[1] 20878a1017
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The commit [1] added host-qemu package for each qemu defconfig
for gitlab runtime testing.
[1] 29e1cb8884
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Joel Stanley <joel@jms.id.au>
Acked-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This defconfig was generated by savedefconfig but we usually
use a manually modified defconfig to add some comments for
Kconfig symbols.
No content change intended.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Joel Stanley <joel@jms.id.au>
Acked-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now based on 4.19.97 (from 4.19.75).
Go back to sha1 version scheme instead of official tag (after
only two tag versions) to get an up-to-date kernel version
(as the offical last tag is for 4.19.94).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot to 2020.01 version and kernel to 5.4.8.
Signed-off-by: Pedro Jardim <jardim.c.pedro@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot to 2020.01 version and kernel to 5.4.8.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit ada40afb32 updated the raspberrypi*defconfigs to use
-add-miniuart-bt-overlay instead of -add-pi3-miniuart-bt-overlay.
Update raspberrypi0w_defconfig also.
Signed-off-by: Christopher McCrory <chrismcc@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Now that the metadata_csum ext4 option is disabled, we no longer need
the U-Boot workaround.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The U-Boot ext4 write support doesn't work with the metadata_csum
option, and the stm32mp157 U-Boot defconfig uses an environment stored
in an ext4 filesystem, so we must create the ext4 root filesystem
without the metadata_csum option enabled.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
[Thomas: only disable the metadata_csum option, the 64bit and
dir_index options can be kept enabled]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
