- Refresh second patch
- Drop third patch (already in version)
- An external mbedtls can be used since version 1.12.0 and
5be7fc9c90
so use it with an upstream patch and drop
MONGREL2_POST_CONFIGURE_HOOKS
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add init script and systemd unit for MRP because it is using a daemon.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ipcalc is an ancient and venerable tool for manipulating IP addresses,
networks, & interfaces from shell scripts. There is a subtool in busybox,
but it does not support everything the upstream tool [1] supports.
[1] https://gitlab.com/ipcalc/ipcalc
Signed-off-by: Derrick Lyndon Pallas <derrick@meter.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- change home page url to https
- convert to meson build
- drop all libav extra options as the internal libav is
gone since commit [1]
- meson options: add doc=disabled
[1] ca478e7546
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop bellagio support as the project is no longer maintained (no update
since 2011, see [1]) and the last reference (from gst-omx) is gone.
[1] http://omxil.sourceforge.net
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- change home page url to https
- drop bellagio support (as the project is no longer maintained
no update since 2011, see [1])
[1] http://omxil.sourceforge.net
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- change home page url to https
- change download url to https
- download source renamed from gstreamer-editing-services to
gst-editing-services
- convert to meson build
- use BR2_PACKAGE_GST1_DEVTOOLS/gst1-devtools instead of legacy
BR2_PACKAGE_GST1_VALIDATE/gst1-validate
- drop examples support
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As resizing the rootfs partition using a partition manager can result
in a non booting image due to the firmware's location, removal of the
size limit for the rootfs allows better match size-wise.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Drop all patches (not needed anymore)
- Update help message of Config.in: kismet does not support only WiFi
but also Bluetooth, SDR ...
- Remove ncurses dependency
- libnl is now optional
- Drop --with-netlink-version (not available anymore)
- Add protobuf, protobuf-c, sqlite and zlib mandatory dependencies
- kismet_client and kismet_drone have been dropped since version 2019-04-R1
- Select libmicrohttpd for kismet_server
- Add optional libusb and lm-sensors dependencies
- Use --{enable,disable}-{libcap,pcre} options
- Use the new LICENSE file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix CVE-2020-26159: In Oniguruma 6.9.5_rev1, an attacker able to supply
a regular expression for compilation may be able to overflow a buffer by
one byte in concat_opt_exact_str in src/regcomp.c.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Use official tarball instead of github helper
- Update indentation in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix build of version 3.0.0 with uclibc. While the patch is added in
package/libapparmor, it in fact fixes a build issue that only occurs
when building package/apparmor, but as both packages share the same
source, they also share the same patches.
Fixes:
- http://autobuild.buildroot.org/results/aea20bd5539fad35385565ffeb7e6ac566507017
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix build of version 3.0.0 with musl. Since the apparmor and
libapparmor packages share the same sources, we also share their
patches: this is why the patch is added in package/libapparmor/3.0.0,
and a symlink package/apparmor/3.0.0 -> package/libapparmor/3.0.0 is
added.
Fixes:
- http://autobuild.buildroot.org/results/22fb440240aa698acc68f026be790d5366c8f908
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
U-Boot 2020.10 no longer provides boot command in default environment for
Udoo Quad/Dual board. Boot script needs to be added to the image. In order
to keep using common infrastructure for freescale boards, move boot files
to root filesystem and add boot script there. Also switch Udoo Neo board
to common freescale infrastructure to simplify maintenance.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
After BSP update Udoo Quad/Dual board once again hangs on boot. On a
new kernel disabling CONFIG_USB option is not enough to work around
the troublesome usb host on Udoo Quad/Dual board. So in order to be
future-proof it makes sense to disable usbh1 block in device tree
rather than fine-tune kernel configuration after BSP updates.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump Linux kernel to 5.8.13 and U-Boot to 2020.10.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump ATF, U-Boot and kernel to the NXP BSP 5.4.24_2.1.0 versions.
On 5.4.24_2.1.0 the revC board is supported by default.
In case an older revB board is used, then the following step in U-Boot is
needed:
=> setenv fdt_file imx8mm-evk-revb.dtb
=> saveenv
=> reset
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump ATF, U-Boot and kernel to the NXP BSP 5.4.24_2.1.0 versions.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When using the imx8 NXP kernel, it is preferred to use the imx_v8_defconfig
instead of the generic arm64 defconfig, as the NXP defconfig selects more
imx8 specific drivers.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- 0001-Temporary-fix-for-build-without-C.patch, AC_PROG_CXX line
number changed.
- Makefile-fuzz-generated.am now in size zero.
- json-c, libcurl: new (FAPI) dependencies since tpm2-tss version 2.4.0
Signed-off-by: Yair Ben-Avraham <yairba@protonmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use a fixed kernel version to have a reproducible and tested
configuration.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The 2020.08-1 release of Bootlin toolchains has brought support for 3
additional architecture variants, so let's support them.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bootlin toolchains in version 2020.08-1 have just been released, so
let's update the toolchain-external-bootlin package to those new
toolchains.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
glibc toolchains must be disabled for static only configuration.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When building iputils for powerpc with BR2_PIC_PIE enabled, the
arping/rdisc/tftpd binaries will segfault at runtime. This can be
traced back to a few bugs in patchelf corrupting the ELFs when
resizing the RPATH to replace "$ORIGIN/" with "/usr/sbin".
This patch pulls in upstream fixes to prevent the binaries from being
needlessly inflated, prevent the startPage from always being adjusted,
fix a few minor bugs, and fix incorrect endianness handling.
Signed-off-by: Conrad Ratschan <conrad.ratschan@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Drop patch (already in version) and so autoreconf
- Update indentation in hash file
https://github.com/freedesktop/spice/blob/v0.14.3/CHANGELOG.md
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Add link to upstream sha256
- Switch to meson-package
- Update indentation in hash file
https://github.com/freedesktop/spice-protocol/blob/v0.14.3/CHANGELOG.md
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
[yann.morin.1998@free.fr:
- move before skeletons
- select the custom 'mine' skeleton, not the sysv one
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Some externals may wish to provide custom init systems for tightly
integrated boot. This has been supported through the BR2_INIT_NONE,
however a downside to the BR2_INIT_NONE is it forces the custom init
system to use either skeleton-custom and roll a custom skeleton for
each target, or skeleton-init-none which isn't a complete skeleton.
Allowing br2-external to define custom BR2_INIT_* means they can now
safely 'select' the BR2_PACKAGE_SKELETON_INIT_*, and re-use any of the
skeletons in Buildroot, or one from a br2-external tree.
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In preparation for supporting br2-external inits, move the 'select' for
the BR2_PACKAGE_SKELETON_INIT_* to their respective init systems. This
will allow a br2-external init to 'select' which skeleton it needs as a
default skeleton.
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
[yann.morin.1998@free.fr:
- add comment to init choice, to remind why selecting skeletons is OK
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
