Create a proper package for the skeleton.
The main Makefile is modified to remove the skeleton support.
The 'dirs' target, will create the $(TARGET_DIR).
The file 'output/target/.root' doesn't exists anymore, as there's no
Make rule to statisfy.
The infrastructure are modified to filter host-skeleton.
It's needed becauses the host-dependencies are derived from the
dependencies of the target package where 'host-' is preprended to the
depedency name.
In the pkg-generic we add skeleton as a dependency to every package.
The whole system/system.mk is now removed at the profit of
package/skeleton/skeleton.mk
[Thomas:
- rebase on top of master and fix some minor conflicts
- remove the 'select BR2_PACKAGE_SKELETON' in
BR2_ROOTFS_SKELETON_DEFAULT and BR2_ROOTFS_SKELETON_CUSTOM, since
anyway the skeleton package is always enabled.
- fixup a few mistakes in the getty handling due to misnamed
variables.]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The /usr/share/X11/locale/locale.dir file is needed by libX11.
Removing it breaks locale support in X11. However, make removes
not only directories but also all files, which are not listed
in the BR2_ENABLE_LOCALE_WHITELIST.
This re-creates locale.dir database file where needed.
Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: use a separate loop, and add some explanatory comments]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the man paths have been removed, it is no longer necessary to
grep them out and the loop can be simplified.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
These directories are going to be removed anyway, so no point purging
their locales.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We use 'rsync -a' to copy the skeleton and overlays, so the target ends
up with the exact same permissions as on the repo. The problem is we
don't track these permissions, since Git doesn't allow for that (except
for the exec bit). This means users with different umasks at the time of
cloning could end up with different target permissions.
Fix this by using --chmod on rsync calls so we don't depend on the
current permission set for the skeleton and overlays. We do depend on
the exec bit, but that's fine since that one is tracked by Git.
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some packages and BR itself create files and directories on the target
with cp/mkdir/etc which depend on the umask at the time of building.
To fix this, use a trick inside the Makefile which wraps all rules when
the umask is not 0022. This sets the umask at the top level, and then
the building process continues as usual.
[Thomas: add --no-print-directory, as suggested by Arnout.]
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of doing a removal of the completion file package per package,
do it all at the finalize stage so it's done once and for all.
Note: This fixes an issue with systemd where passing a --bashcompletiondir
or --zshcompletiondir would be evaluated to '.' by the autotools macro.
This would create a 'target./' directory.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add aarch64_be support. Note that CONFIG_CPU_BIG_ENDIAN should be
defined in kernel config when building a big endian kernel.
Signed-off-by: Zhang Jian(Bamvor) <bamvor.zhangjian@huawei.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The boost and jack2 packages fail to build when PARALLEL_JOBS is empty
so instead of using an empty PARALLEL_JOBS don't use it in the MAKE
variable when top-level parallel make is being used.
To simplify the use of top-level parallel make, check the MAKEFLAGS
variable to know automatically if the -j option is being used, also use
the "=" operator instead of the ":=" operator because the MAKEFLAGS
variable can be checked only in a "recursively expanded variable".
The "override" keyword must be used in order to change the automatic
variable "MAKE".
When the top-parallel make is being used the sub-make are called without
specifying the "-j" option in order to let GNU make share the job slots
specified in the top make. This is done because GNU make is able
to share the job slots available between each instance of make so if you
want to increase the number of jobs you just need to increase the <jobs>
value in the top make -j<jobs> command.
If we specify the -j<jobs> option in each instance of make, it is less
efficient, e.g. in a processor with 8 cores we specify -j9 in each instance:
the number of processes goes up to 81 because each sub-make can execute
9 processes. The excessive number of processes is not a good thing
because in my tests even -j16 is slower than -j9.
Instead if we don't specify the -j<jobs> option in the sub-make, the top
make share the job slots automatically between each instance, so the
number of process in this examples goes up to 9 that is faster than
using up to 81 processes.
e.g. when the -j3 option is specified only in the top make:
possible state n. 1:
process 1 - <packagea>-build
process 2 - <packagea>-build
process 3 - <packagea>-build
possible state n. 2:
process 1 - <packagea>-extract
process 2 - <packageb>-configure
process 3 - <packagec>-build
possible state n. 3:
process 1 - <packagea>-build make -j1
process 2 - <packageb>-build make -j1
process 3 - <packagec>-build make -j1
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CMake verbose mode is based on VERBOSE environment variable.
* If VERBOSE is exported but empty, only "Dependee ... is newer than
depender ..." messages are shown.
* If VERBOSE is exported and set (whatever the value), all compilation
commands are shown.
VERBOSE is currently systematically exported by Buildroot, even if it
is empty, in the root Makefile, which implies that the "light" verbose
mode - with "Dependee ... is newer than depender ..." messages - is
always enabled.
VERBOSE should only be exported when V=1, which is the standard way to
enable verbose mode in Buildroot.
Signed-off-by: Cédric Marie <cedric.marie@openmailbox.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_DEFCONFIG should not be present in saved defconfig file.
The use case is:
make qemu_arm_versatile
make savedefconfig BR2_DEFCONFIG=my_custom_defconfig
BR2_DEFCONFIG is set in my_custom_defconfig with an absolute path
to qemu_arm_versatile (value present in .config) and set in
my_custom_defconfig as it is different from default mentioned in
config.in (default is BR2_DEFCONFIG from environment).
On savedefconfig recipe, simply remove BR2_DEFCONFIG from generated file
[Peter: fixup typos and use SED as noted by Arnout]
Signed-off-by: Herve Codina <Herve.CODINA@celad.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is possible to end up with a path containing spaces if the kernel
localversion contains spaces.
Be it good practice or not, there are third party vendors which
distribute kernel configuration files for reference platforms which have
quoted strings containing whitespaces in the localversion.
There was already a fix to handle paths with whitespaces or other
special characters when running strip, which consists of using the find
-print0 and xargs -0 pair of arguments, but the kernel module stripping
wasn't included in the fix.
This commit includes the same fix to the kernel module stripping line.
Signed-off-by: Erico Nunes <erico.nunes@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With this commit, one can now execute the source-check, external-deps
and legal-info targets regardless of the checks normally being done by
packages on the configuration.
Note that we intentionally do not go down the road of adding %-source,
%-legal-info, and the miryad of other targets that could work in such
situations. We only whitelist a few targets that are really useful to
have as nobuild_targets.
[Thomas: also add 'clean' and 'distclean' to the nobuild_targets, as
suggested by Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some packages do some sanity checks on their configuration, for
example linux checks that the defconfig string is not empty when a
defconfig is used. Such checks are currently always performed, except
when the 'source' target is part of make goals.
This is problematic for two reasons:
- Other targets such as 'source-check', 'external-deps' or
'legal-info', that do not consist in doing a build, cannot be
executed in such situations.
- The current code removes the check as soon as one of the targets is
source. But if there are other non-source targets called at the
same time, the checks are ignored.
This commit therefore introduces an internal variable called
BR_BUILDING, which tells packages if we are actually building or
not. A variable nobuild_targets indicates the targets that we do not
consider as being build targets.
For the moment, nobuild_targets only contains 'source', to be
completely iso-functional.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Now that all the external-deps, source-check and source targets are
properly implemented based on the package infrastructure, the
PACKAGES_SOURCE, TARGET_HOST_DEPS, HOST_DEPS and HOST_SOURCE variables
are no longer needed. This is a good thing since they were anyway
incorrect, as they were only doing a two level recursion in the
dependencies of host packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[tested with a randpackageconfig]
Now that all the bits are in place, switch the global 'source' target
to use the package infrastructure logic.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[with 'make source' (actually together with the next patch).]
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[tested with a randpackageconfig]
This commit switches the implementation of the global source-check
target to use a package infrastructure based mechanism, using the
$(1)-all-source-check target added in the previous commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
make source-check is here to check whether the remote sources for the
current selection of packages are still available. In its current
implementation, since it simply calls recursively a sub-make with the
source target, it can be a noconfig_targets. However, a follow-up
change will make source-check not use a sub-make, which will require
it to no longer be a noconfig_targets.
Therefore, as a preparation, this commit moves source-check outside of
noconfig_targets.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit changes the global 'external-deps' target to use the newly
introduced per-package <pkg>-all-external-deps, instead of relying on
the 'source' target with a custom DL_MODE.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
When listing defconfig files was moved to its own make target, it was
not added to the general help text.
However, this is a very important topic, so list it.
[Peter: drop ':' character]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On some systems (e.g. Fedora 20), the build breaks when parsing include
directives in our /etc/ld.so.conf, with error messages as thus:
/sbin/ldconfig: need absolute file name for configuration file
when using -r
So, enforce the path to the ld.so.conf file to point to our own, in the
target/ directory.
Reported-by: Al West <al.west@v-nova.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The first dependency of these targets is
$(BUILD_DIR)/buildroot-config/*conf
so the $(BUILD_DIR)/buildroot-config directory certainly exists.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
show-targets is only used currently by the graph-depends script, which
already recurses into the dependencies of the selected packages to
build the dependency graph. Therefore, dumping the contents of
$(PACKAGES) and $(ROOTFS_TARGETS) is sufficient: $(HOST_DEPS) and
$(TARGET_HOST_DEPS) will contain packages that are dependencies of
packages already listed in $(PACKAGES), which graph-depends will
discover by itself.
This allows to remove one more usage of $(HOST_DEPS) and
$(TARGET_HOST_DEPS), which is one more step towards their removal.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This commit changes the implementation of the global 'legal-info'
target to use the newly introduced per-package <pkg>-all-legal-info
target. This allows to avoid using the $(TARGET_HOST_DEPS) and
$(HOST_DEPS) variables that we are trying to remove.
It is worth mentionning that this commit might change the output of
'make legal-info' by making it more correct than it was. With the
existing implementations, we could be missing packages if they were
host packages, or target packages not properly selected in terms of
Config.in dependencies, and with a more than a two-level deep
dependency from a target package properly selected at the Config.in
level. This is because our previous logic was simply taking all
packages in the "TARGETS" (now called "PACKAGES") variable, which are
only the target packages explicitly selected in the .config file, and
doing a two-level deep recursion in the dependencies.
With this commit, we switch legal-info to use proper make-based
dependencies, so we no longer have the limitations we used to
have. For this reason, the output of 'make legal-info' after this
patch may contain *more* entries than before this patch, but it is
really because it is now correct.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
For clarity, this commit renames the TARGETS variable to the more
meaningful PACKAGES variable. Indeed, only packages (handled by one of
the package infrastructures) should be listed in this variable, and
not other random non-package targets.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The main Makefile was declaring a subset of the per-package targets as
being PHONY, but not all of them. Now that the pkg-generic package
infrastructure is taking care of that in a much more systematic
fashion, this commit gets rid of the unneeded code from the main
Makefile.
[Thomas: re-add list-defconfigs to the list of PHONY targets, as
noticed by Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
In 8a46d4bf1f the randpackageconfig and allpackageyesconfig were
extended with disabling all the legacy options, otherwise the resulting
config couldn't be built. However, that didn't work for randconfig and
allyesconfig.
This commit reverts 8a46d4bf1f and replaces it with a different
approach: skipping of the legacy config options is passed explicitly
through the environment variable SKIP_LEGACY, which forces
BR2_SKIP_LEGACY to y. The new option BR2_SKIP_LEGACY completely
disables the legacy handling, which effectively removes all the legacy
options from the .config.
However, in that case no values are set for the legacy options so a
subsequent oldconfig will query them. Therefore, run an additional
olddefconfig.
[Peter: fix s/BR2_LEGACY/SKIP_LEGACY/ typo]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr: do not rely on a user-visible option, works
perfectly well with only blind options set from the environment]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This definition of HOSTFC is completely wrong.
"$(HOSTLD)" should be "$(HOSTFC)". Also, "echo" always succeeds, so
"which g77 || type -p g77 || echo gfortran" is never run.
Anyway, HOSTFC is most likely set to "/use/bin/ld" and nobody has
complained about it before me, so I guess it is not used at all.
At least grepping HOSTFC, FC_FOR_BUILD did not hit any packages.
Drop HOSTFC and FC_FOR_BUILD.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix issues noticed by Arnout:
- Rewrap the linux/Config.in paragraph
- Revert the "is a toolchain dependency" -> "has a toolchain
dependency" change from pkg-generic.mk, as the original was
correct.]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The GNU make's origin function know undefined variable well,
so the outer ifdef/endif conditional checking is unneeded.
>From `info make` documentation, origin will return
`undefined'
if VARIABLE was never defined.
`command line'
if VARIABLE was defined on the command line.
...
Therefore, $(origin V) will get a value anyway, killing ifdef/endif
is viable and safe.
Furthermore, I've checked the minimal requirements from the top
Makefile is GNU make 3.81, and that version of GNU make has support
of origin function well already, so now it's safe to kill the outer
conditional checking, without upgrading the minimal requirements.
Signed-off-by: Cheng Renquan <crq@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[ Commit description is borrowed from Linux Kernel
(commit b8b0618cf6fa) and adjusted for Buildroot ]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The global .PHONY specification in the main Makefile is describing a
number of directory targets as being PHONY, which doesn't make much
sense. PHONY targets are targets that do not exist on the filesystem,
and which make should always consider as not being up-to-date, so that
the commands associated to these targets are always executed by make
when the command is invoked, even if a file with the same name exists
on the filesystem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This comment is a left-over from previous code changes, and it doesn't
make much sense where it is placed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The documentation of the package-specific targets is heavily inspired by
the earlier patch by Thomas Petazzoni [1], but the <pkg>-install*
targets were left out since they're not useful for the developer IMHO.
The *-menuconfig target's help text is moved to the package-specific
targets.
[1] http://patchwork.ozlabs.org/patch/433692
[Thomas: remove double <pkg>-graph-depends help.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As discussed in the FOSDEM2015 BR developer meeting, the output of
'make help' is too long for comfortable reading. To shorten it, split
off the list of defconfigs in a new target, 'list-defconfigs'.
Declare the new target as phony.
Add 'list-defconfigs' to the documentation.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, a 'make clean' leaves the graphs/ subdirectory in the
output directory. This commit defines a GRAPHS_DIR variable, used by
the different graph-generating targets, and which gets cleaned up in
the 'clean' target.
[Thomas: use the new GRAPHS_DIR variable in more places, as suggested
by Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Special characters in files or directories in the rootfs can cause
problems when stripping files. For example "target/some song.mp3"
gets treated as two entries. "target/some" and "song.mp3" are both
passed to $(STRIPCMD). This then errors saying files don't exist.
Additionally a ' and possibly other special characters in a file path
causes xargs to give the error: "xargs: unmatched single quote; by
default quotes are special to xargs unless you use the -0
option". This also has the effect of removing this entry and further
entries from the list of files to strip. This can be demonstrated by
having a test directory with the files: "cat" "rabbit's"
"elephant". then running the command: "find -name "*" -print | xargs"
To fix this we pass -print0 to find which seperates entries with a
NULL character, and we pass -0 to xargs to tell it to only use NULL
characters as the deliminator.
Signed-off-by: Andrew Parlane <andrewp@carallon.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Updated text to say that the defconfig is written to the BR2_DEFCONFIG
location.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We have the BR2_DEFCONFIG feature that saves the path to the defconfig
file that was specified on the command line, so that a later
savedefconfig would immediately save to the right location. This wasn't
done for the defconfigs in the configs/ directory, however, to avoid
accidentally overwriting them.
Now we decided that it would be more useful to overwrite the defconfigs
in the configs/ directory after all. To do this, we pass the path to
that defconfig in the environment.
Cc: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Buildroot unexports PKG_CONFIG_PATH in the top-level Makefile for purity
reasons. But it has an unfortunate side-effect in that "make menuconfig"
will not (necessarily) be able to pick up ncurses via host pkg-config,
breaking "make menuconfig" on systems where ncurses is installed in a
non-standard location.
This patch saves the original PKG_CONFIG_PATH variable in
HOST_PKG_CONFIG_PATH and restores the original PKG_CONFIG_PATH variable
only in the sub-processes that builds the various menuconfig/nconfig/...
targets.
(PKG_CONFIG_PATH has to be placed in front of the make command so that it
propagates to sub-processes. If given as an argument, it doesn't work.)
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Because it's just checking the presence of the "s" character even a
make --warn-undefined-variables
is detected as a silent build.
Fix that by filtering out long options.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The comment language may lead the reader to think that .br-external is removed
whenever BR2_EXTERNAL is not set in the command line. Make it clear that
BR2_EXTERNAL must be explicitly set to an empty value for .br-external to get
removed.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The GENERATE_LOCALE variable is used for the qstripped version of
BR2_GENERATE_LOCALE. It was used by both the glibc locale generation
code (in the main Makefile), and by the uClibc logic in
package/uclibc/uclibc.mk. However, since commit
33de740170 ("Makefile: convert
"target-generatelocales" to a hook"), this code has been moved around
in the main Makefile, and the definition of GENERATE_LOCALE is now
*after* uclibc.mk is included, and therefore this variable is always
empty when uclibc.mk looks at it for its conditionals. Moreover, it is
now only defined in the main Makefile is BR2_TOOLCHAIN_USES_GLIBC is
'y', which obviously isn't the case for uClibc toolchains.
Since it's anyway not very clear to have this variable shared between
the glibc locale generation logic in the main Makefile and the uClibc
configuration code in uclibc.mk, this commit:
- Renames the GENERATE_LOCALE variable in the main Makefile to
GLIBC_GENERATE_LOCALES.
- Renames the GENERATE_LOCALES hook to GENERATE_GLIBC_LOCALES, since
it's specific to glibc.
The fix for the uClibc case is part of a followup commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We only documented a few of the <package>- targets and it's hard to
decide which ones are relevant for make help. Since the help is already
way too long, it's better to remove these advanced targets.
Instead, let's refer to the online manual.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the only way br2-external may generate a document is by
including that document's recipe from within external.mk.
But external.mk is only parsed when the tree is configured.
This is unlike our internal document (the manual) which can be generated
from within an unconfigured tree.
So, include the documents from br2-external at the same time we include
our own document:
- expect the same layout as we have: docs/DOC_NAME/doc-name.mk
- do not fail if there is no document: use "-include", not "include"
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rename the GENDOC infrastructure so that it more closely matches the way
we handle the packages infras.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Move the GENDOC infra to its own file, so it is even less tied to our
manual document, so that it is more obvious that GENDOC is an infra like
our packages infras, and 'manual' is a document like we have packages.
Ideally, this new file should better go in docs/ rather than in package/ .
However, docs/ is already full of our website stuff, so adding it in
there would just serve to clutter the website.
So, let's just put alongside the other infrastructures, in package/ .
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In the coming patch, we are going to change the order in which our rules
are defined, because we include the gendoc infra before we define the
'all:' rule, so we need to decalre the 'all:' rule before we include
gendoc.
Declare it very, very early in the Makefile, so it always kick in first.
The actual dependency is still declared much later, all that counts is
that "all:" is first.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Due to excessive parenthesis, the TARGETS_LEGAL_INFO expression was
evaluated to something like this:
toolchain-legal-info toolchain-external-legal-info busybox-legal-info zlib-legal-info))
Yes, with the last two parenthesis. This had the effect that the
zlib-legal-info rule was never called: the last package of $(TARGETS)
$(TARGET_HOST_DEPS) $(HOST_DEPS) was never added in the legal-info
information.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Since the removal of py/pyc files is Python-specific, this commit
moves the logic removing those files to python.mk and python3.mk
respectively.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, pkg-utils.mk (included via package/Makefile.in) is only included
when a configuration file already exists. This means that none of the
utilities it defines are available without .config.
In particular:
- the MESSAGE macro, causing pretty build output. Since some make targets
can be run even without .config, like 'make manual', not having this
pretty printing is odd.
- pkgname, pkgdir: in a subsequent patch, these functions will be used for
the generation of the manual, and since this should work also without
.config, we need these functions to be available.
This patch moves the include of pkg-utils.mk from package/Makefile.in to
Makefile, outside of the check for .config.
This is a quick fix. The full solution involves to minimize the amount of
Makefile code that is guarded by a check on .config. This approach will be
taken in the 2014.11 release cycle.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix commit title, use one line for both CONF_OPT options.]
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The gconv libraries are used to translate between different character sets
('charsets', even 'csets' sometimes). Some packages need them to present
text to the user (eg. XBMC Gotham).
In (e)glibc they are implemented by the internal implemenation of iconv,
called gconv, and are provided as dlopen-able libraries.
Note that some gconv modules need extra libraries (shared by more than
one gconv module), so we must, when adding a subset of modules, scan the
installed modules in search of the missing libraries.
[Thomas: add general explanation in expunge-gconv-modules and fix
coding style.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Eric Limpens <limpens@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
I would like to propose adding the site to the legal-info manifest
files. This gives a little more information on where the sources came
from without adding much overhead. Please note that is is only for
packages where the source is not local or set with OVERRIDE_SRCDIR.
Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The rules to purge unwanted locales from the target also removed
the locale-archive file from /usr/lib/locale which contains the
locale definitions explicitly generated for the target.
Signed-off-by: Sven Neumann <neumann@teufel.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the rule that adds common dependencies to every target in the
"TARGETS" variable, because all those targets are packages that use the
package infrastructure or they depend on targets that use the package
infrastructure. The package infrastructure already adds common
dependencies. Therefore, this rule is useless.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For consinstency sake convert the "target-generatelocales" rule to a
TARGET_FINALIZE_HOOKS hook.
Signed-off-by: Fabio Porcedda <fabio.porcedda@telit.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For consinstency sake convert the "toolchain-eclipse-register" to a
TARGET_FINALIZE_HOOKS hook.
Signed-off-by: Fabio Porcedda <fabio.porcedda@telit.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add TARGET_FINALIZE_HOOKS to the "target-finalize" rule to be able to
add to it commands as needed.
This is useful for having a nicer output because commands are executed
after the "target-finalize" initial message, also it is useful to ensure
an executing order even when top-level parallel makefile is being used.
Also convert "TARGET_PURGE_LOCALES" to a hook that uses
"TARGET_FINALIZE_HOOKS".
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The graph-depends commands cd into the CONFIG_DIR and run the script
from there. However, this means that when $(O) is a relative path, it
will no longer be correct. Therefore, use $(BASE_DIR) instead of $(O).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To be able to check the "dot" command availability in
"<pkg>-graph-depends" move the check to the "graph-depends-requirements" rule.
Also don't use a subshell for the exit command to be sure that the error
will be returned by the shell.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 'graph-depends' logic uses the 'dot' program from Graphviz to draw
the dependency graph, but it doesn't check its existence before
starting the generation of the graph, which can lead to user confusion
as reported in:
http://lists.busybox.net/pipermail/buildroot/2014-June/099278.html
With this commit, we first test if the 'dot' program is available, and
if it's not, we error out with a clear error message:
$ make graph-depends
ERROR: The 'dot' program from Graphviz is needed for graph-depends
make: *** [graph-depends] Error 1
[Peter: send error message to stderr instead]
Reported-by: Dallas Clement <dallas.a.clement@gmail.com>
Cc: Dallas Clement <dallas.a.clement@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
$(TARGET_DIR)/usr/lib/perl5/$(PERL_VERSION)/$(PERL_ARCHNAME)/CORE contains include files.
*.bs & .packlist files come with perl or perl/cpan packages.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kids nowaday seem to prefer a left-to-right drawing rather than the
more conventional and historical top-down drawing.
Rather than multiply the number of environment variables, just add
a single one where the user can pass arbitrary dot options, such as:
make BR2_GRAPH_DOT_OPTS=-Grankdir=LR graph-depends
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The correct capitalised form appears to be "BusyBox" rather than "Busybox";
fix all references to the latter form. (Most such references occur in the
manual and in commentary in package makefiles.)
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This enables powerpc64 and powerpc64le. Currently, le needs at least
glibc 2.19 and gcc 4.9.0. For gdb, 7.7.1 works (added in an earlier
patch).
[Peter: also disallow gcc 4.8 for ppc64le]
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for powerpc64le-linux-gnu. This includes
needed patches to fakeroot and gmp.
gmp patch is from upstream HG tree.
fakeroot patch is from Ubuntu written by Adam Conrad.
Signed-off-by: Jeff Bailey <jeffbailey@google.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The file external.mk was included before fs/common.mk, so it was impossible
to add rootfs targets using the BR2_EXTERNAL mechanism.
This change moves the inclusion of fs/common.mk before external.mk to allow
this.
Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr>
[ThomasDS: rebased, update commit message]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There will soon be new options to the graph-depends script, which we
can only sanely pass via environment variables.
Currently, we use such an environment variable to pass the maximum depth
of the dependency graph; the name of that variable is explicit that it
contains just the depth.
However, there has been so far no release of Buildroot which would make
use of that variable, so no user should have come to rely on it.
Rename that variable so it is less specific, and more generic, so it can
be used to pass more options to graph-depends.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The target-finalize target does a large number of actions (removing
unnecessary files, stripping objects, etc.) but does not have a header. This
makes it seem that all these actions are done as part of the last action
before target-finalize, for example:
>>> makedevs undefined Installing to target
To make a clear distinction, add a message to the beginning of
target-finalize:
>>> Finalizing target directory
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The "target-purgelocales" target must be executed after all the other
targets and before the "target-finalize" target, so create a
TARGET_PURGE_LOCALES variable containing the commands of the target
"target-purgelocales" and add it at the beginning of the
"target-finalize" target.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If a kernel module is installed with incorrect permissions (0755 iso 0644),
it would get stripped in a way that would render the kernel module broken.
While the incorrect permissions are a developer error, it is a minor change
to prevent this mistake from causing incorrectly stripped modules.
This was reported with bug #6992:
https://bugs.busybox.net/show_bug.cgi?id=6992
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Because the "show-targets" target print the targets that will be built,
print also their dependencies.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As stated in the buildroot user manual add just a single space before
and after a '=' sign.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The target depends on the toolchain so add it as a dependency.
This also fix the support to top-level parallel make.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The "toolchain-eclipse-register" target needs the toolchain so add
toolchain as a dependency.
This also fix the support to top-level parallel make.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, graph-depends (and PKG-graph-depends) do not store the
intermediate 'dot' program.
Some users would like to get the dot program to be able to further
customise the generated graphs (eg. modify the layout, colorise some
of the packages...)
So, store the intermediate dot program alongside the generated graph.
Reported-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Maxime Hadjinlian" <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This variable contains extra environment variables that we can not export
since they are clashing with some build systems (eg. BUILD_DIR with
u-boot).
So, we may need these variables for uses other than the user's hooks
for instrumentation. For example, we'll use them later on to export
BUILD_DIR to the download helper scripts.
Fix comment, too.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The usual way to enable a package using the package infrastructure is to
use a config option so instead to add the toolchain package to the
TARGETS variable in the Makefile add a config option like all the other
toolchain packages.
[Thomas: remove comment that no longer made sense in the main
Makefile, and add a comment above the new hidden Config.in option to
explain what it is useful for.]
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Extend BR_PATH because a few host-packages install programs in this
location.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the HOST_PATH and TARGET_PATH variables almost contain the same
things, let's factorize this in a single BR_PATH.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the complete dependency chain of a package is used to
generate the dependency graph. When this dependency chain is long,
the generated graph becomes almost unreadable.
However, it is often sufficient to get the first few levels of
dependency of a package.
Add a new variable BR2_GRAPH_DEPTH, that the user can set to limit
the depth of the dependency list.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Variables should be prefixed with BR_ when they are not user-facing.
As a side effect, the new variable is prettier than the previous one. :-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After adding support top-level parallel make the rootfs-* dependencies
were not anymore considered for the "source" and "legal-info" targets
because the rootfs-* targets were removed from TARGETS variable and
placed in the TARGETS_ROOTFS variable so to fix the issue use use both
"TARGETS" and "TARGETS_ROOTFS" variables.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Vincent Stehlé <vincent.stehle@freescale.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The package infrastructure add automatically the "dirs" dependency so
remove it when the package infrastructure is being used.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Buildroot toolchain creates big endian binaries instead of little endian
ones for microblaze architecture. The reason is wrong BR2_ARCH string.
KERNEL_ARCH must contain microblaze in both cases.
Signed-off-by: Jan Drazil <xdrazi00@stud.fit.vutbr.cz>
Signed-off-by: Jan Viktorin <xvikto03@stud.fit.vutbr.cz>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the migration of the toolchains to the generic package
infrastructure, it is no longer used.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Because now the toolchain dependency is automatically added by the
package infrastructure the BASE_TARGETS variable is useless so just
remove it.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The parallel build patch series has significantly reworked how some of
the core dependencies are expressed. We now have the following
dependencies:
all: world
world: target-post-image
target-post-image: $(TARGETS_ROOTFS)
with TARGETS_ROOTFS containing the list of root filesystem image
targets, each having the following dependencies:
$$(BINARIES_DIR)/rootfs.$(1): target-finalize $$(ROOTFS_$(2)_DEPENDENCIES)
The bottom line is that the "target-finalize" target, which in turns
ensures that all packages are built, is only triggered if at least one
filesystem image is enabled.
As we want to support builds with no filesystem image selected, this
is not acceptable. As a fix, we change the target-post-image target
to:
target-post-image: $(TARGETS_ROOTFS) target-finalize
This way, target-finalize will be triggered even if TARGETS_ROOTFS is
empty. This is still correct for parallel build, as the individual
root filesystem image targets still depend on target-finalize.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Rename the GRAPH_OUT and GRAPH_ALT variables according to our
recently-agreed naming scheme for user-facing variables:
- GRAPH_OUT -> BR2_GRAPH_OUT
- GRAPH_ALT -> BR2_GRAPH_ALT
The documentation part of the rename is handled by Thomas as
part of his manual fixing spree. ;-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using a relative path for BR2_EXTERNAL, and using an external defconfig,
such as in (from a Buildroot top-dir):
make O=.. BR2_EXTERNAL=.. foo_defconfig
is broken. It is unclear why the %_defconfig rule recurses in that case.
This patch internaly makes BR2_EXTERNAL canonical (ie. makes it an absolute
path), and checks the directory exists.
[Peter: s/relatively/relative/ as suggested by Thomas]
Reported-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix a bug introduced by the commit a24877586a
(Makefile: add support for top-level parallel make).
That commit put a new rule inside the target-finalize rule so it was
erroneously splitted in two parts.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The main Buildroot Makefile was removing *.py or *.pyc if Python 2 was
enabled, but for Python 3, this action was taken care of by a post
install target hook of python3.mk, which means it wouldn't work with
external modules (the .py/.pyc removal would be done before external
Python modules are installed).
We fix this by making the global *.py/*.pyc removal in the main
Makefile work for both Python 2 and Python 3.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
After the latest patches top-level parallel Makefile is working but
there is still an issue when a package has an unspecified optional
dependency so change the comment to explain that.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To be able to use top-level parallel make we must not depend in a rule
on the order of evaluation of the prerequisites, so instead of relyng on
the left to right ordering of evaluation of the prerequisites add an
explicit rule to describe the dependencies.
Add explicit rules to describe the following dependency chain:
$(TARGETS) -> target-finalize -> rootfs-* -> target-post-image
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit makes the dependency from the target toolchain explicit.
This way we can buid from command line a package that use
inner-generic-package right after the configuration phase, example:
make clean <package-name>
Also remove TARGETS_ALL because the only purpose was to add toolchain
dependency so it's superseded by this commit.
To prevent circular dependency add the new variable
<pkgname>_ADD_TOOLCHAIN_DEPENDENCY to avoid adding the toolchain
dependency for toolchain packages.
This is also a step forward supporting top-level parallel make.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As the e-mail address buildroot@buildroot.org is now enabled, update the
e-mail addresses in the source tree from @uclibc.org and @busybox.net to our
own proper domain.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To make the naming consistent (all user-visible options should be
prefixed with BR2_).
An entry is added to Makefile.legacy to warn users who have set
BUILDROOT_CONFIG but not BR2_CONFIG.
Still export BUILDROOT_CONFIG but pointing to some phony value, to
make sure that scripts that still use it fail in a predictable way.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To make the naming consistent (all user-visible options should be
prefixed BR2_).
An entry is added to Makefile.legacy to warn users who have set
BUILDROOT_DL_DIR but not BR2_DL_DIR.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch removes deprecated symbol BR2_HAVE_DOCUMENTATION and all its
usage. Additionally, it removes the now unused BR2_DEPRECATED_SINCE_2012_11.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To make the naming consistent (qstripped variant of a config option
should be named BR_XXX).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Our current stripping strategy requires that shared libraries have the
executable permission. However, this is by far not something
recognized as a standard behavior: Debian/Ubuntu distributions for
example do not have executable permissions on their
libraries. Therefore, pushing to upstream packages fixes that add the
executable permissions is not easy.
As a result, this commit improves the stripping logic so that it not
only strips the files that are executable, but also the ones that
match '*.so*', which should match both the shared libraries and the
dlopen()'able plugins, as long as they have a .so extension.
Thanks to this addition, a number of manual "chmod +x" done by various
packages can be removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If two files with the same relative paths exist in multiple overlay
skeletons, and they have the same modification time and size, then rsync
might not copy the later file on top of the earlier file. This patch fixes
this by adding the -I option to the rsync commands used in the overlay
skeleton file installations. ("man rsync" indicates that this option turns
off the file-size/mod-date "quick check" behavior, causing all files to be
updated - more like the cp commands that we had originally.)
[Peter: use --ignore-times to make it obvious what the option does]
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some packages install locales to /usr/lib/locale.
Parse and purge unneeded ones there too.
Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If the Buildroot tree is read-only, then $(TARGET_DIR_WARNING_FILE) is
copied read-only into target/ but we may want to remove it during the
build process.
This poses no real problem, since target/ itself is guaranteed to be
writable, but for good measure, force $(TARGET_DIR_WARNING_FILE) to be
writable itself.
Reported-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If the source target skeleton is read-only (eg. because Buildroot's
source dir is), modifications to the output target (such as creating
/etc/hostname and /etc/issue) fail.
(This can happen if the Buildroot source dir is NFS-mounted read-only
to be shared between different machines, for example).
Signed-off-by: Nathan Lynch <ntl@pobox.com>
[yann.morin.1998@free.fr: we use rsync now, not cp; --chmod=Du+w
suggested by Arnout; clarify commit log]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
GNU tar > 1.13.17 interprets TAR_OPTIONS as an environment variable
containing options to be prepended to the set on the command line.
Since we use the same variable, if the user's environment already
contains TAR_OPTIONS, our use of the same variable name modifies
the environment and causes untars to misbehave when TAR_OPTIONS
causes a -xf to be prepended to the tar command line, likely
converting a subsequent flag into a spurious filename.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 94dd02f5d0.
The change breaks defconfigs from BR2_EXTERNAL, both for in-tree and
out-of-tree builds.
Besides, the problem reported in 94dd02f could not be reproduced.
I can read French, and I suspect a relative path was used for either
BR2_EXTERNAL or O.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
PDF files can not be easily embedded in other documents (eg. ODT, or HTML).
Add support for generating PNG graphs, by setting the GRAPH_OUT=pdf|png on
the command line:
make GRAPH_OUT=png graph-build graph-depends
The default is still to generate PDF graphs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Generate the graph of the complete dependency tree by calling:
make graph-depends
It's also possible to generate the graph-depends for a single package:
make PKG-graph-depends
The graphs are generated in $(O)/graphs/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Generate the build-time graphs by calling:
make graph-build
This generates the graphs in $(O)/graphs/
It is possible to use the alternate color-scheme by setting the variable
GRAPH_ALT=1 on the command line:
make GRAPH_ALT=1 graph-build
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we do not include .config for all '%_defconfig' targets, but
we forgot to also exclude plain 'defconfig'.
Reported-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The source-check / external-deps make targets ends up calling recursively
into buildroot's Makefile, causing make to display a warning:
make[2]: warning: -jN forced in submake: disabling jobserver mode.
We don't support toplevel parallel make, so get rid of the warning using
MAKE1 instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit allows the user to store defconfigs in
$BR2_EXTERNAL/configs/. To achieve this:
* It adds a new %_defconfig that looks in $BR2_EXTERNAL/configs/ for
the corresponding defconfig file.
* Updates the help target to also list external defconfigs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Tested-by: "Samuel Martin" <s.martin49@gmail.com>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit allows the BR2_EXTERNAL directory to contain Config.in and
Makefile code, which gets integrated into the Buildroot build logic:
- Buildroot automatically includes the $BR2_EXTERNAL/Config.in in the
top-level configuration menu.
- Buildroot automatically includes the BR2_EXTERNAL/external.mk in
the build logic, so it can for example be used to include other .mk
files that define package recipes.
This is typically intended to be used to create target packages in the
BR2_EXTERNAL directory, but can also be used for bootloaders, host
packages, or other custom make logic.
We also add a dummy Config.in file in support/dummy-external/ to
ensure that the source "$BR2_EXTERNAL/Config.in" line will point to an
existing file even when BR2_EXTERNAL is not used by the user.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Tested-by: "Samuel Martin" <s.martin49@gmail.com>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit introduces the BR2_EXTERNAL environment variable, which
will allow to keep Buildroot customization (board-specific
configuration files or root filesystem overlays, package Config.in and
makefiles, as well as defconfigs) outside of the Buildroot tree.
This commit only introduces the variable itself, and ensures that it
is available within Config.in options. This allows us to use
$BR2_EXTERNAL in a 'source' statement in Config.in.
Following patches extend the usage of BR2_EXTERNAL to other areas
(packages and defconfigs).
In details, this commit:
* Introduces the BR2_EXTERNAL Kconfig option. This option has no
prompt, and is therefore not visible to the user and also not
stored in the .config file. It is automatically set to the value of
the BR2_EXTERNAL environment variable. The only purpose of this
BR2_EXTERNAL Kconfig option is to allow $BR2_EXTERNAL to be
properly expanded when used inside Kconfig source statements.
* Calculates the BR2_EXTERNAL value to use. If passed on the command
line, then this value is taken in priority, and saved to a
.br-external hidden file in the output directory. If not passed on
the command line, then we read the .br-external file from the
output directory. This allows the user to not pass the BR2_EXTERNAL
value at each make invocation. If no BR2_EXTERNAL value is passed,
we define it to support/dummy-external, so that the kconfig code
finds an existing $(BR2_EXTERNAL)/package/Config.in file to
include.
* Passes the BR2_EXTERNAL into the *config environment, so that its
value is found when parsing/evaluating Config.in files and .config
values.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Tested-by: "Samuel Martin" <s.martin49@gmail.com>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds the OBJCOPY and RANLIB variables to
HOST_CONFIGURE_OPTS, since grub legacy will need these defined in
order to build properly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also export BUILD_DIR for post-{build,images} hooks, so they do have
a place to store generated files.
Note: this will be more einteresting for the instrumentation of steps,
to come in a later patch.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Buildroot has three places where rsync is used:
1. to copy the target skeleton
2. to copy the rootfs overlay(s)
3. to copy overridden package sources
In all of these cases, we want to exclude version control files by default.
Place 1 and 2 used an identical set of explicit --exclude options, while
place 3 used the option --cvs-exclude. This last option, however, not only
excludes version control files, but also binary files (.o, .so) and any file
or directory named 'core' (a problem for the linux kernel that has several
directories with this name). Moreover, the exact list of excluded files when
using --cvs-exclude depends on the version of rsync.
This patch creates one global variable RSYNC_VCS_EXCLUSIONS that can be used
by the various rsync commands. It excludes the version control files of
svn, git, hg, cvs and bzr.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When calling 'tr' without quoting braces, bash can make really weird things
if there are existing 'single-letter-named' directories
eg:
thierry@thierry-desktop:~$ echo AAA | tr [A-Z] [a-z]
aaa
thierry@thierry-desktop:~$ mkdir m
thierry@thierry-desktop:~$ echo AAA | tr [A-Z] [a-z]
AAA
The (quick) analysis is that the callee (tr) argvs then
contain 'm' thus the translation does not work
Using quotes works around it:
thierry@thierry-desktop:~$ echo AAA | tr '[A-Z]' '[a-z]'
aaa
Signed-off-by: Thierry Bultel <thierry.bultel@wanadoo.fr>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The output extension and the generation messages refer to 'text', but the make
target was confusingly 'txt'. This patch changes the make target for
consistency.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
$(BUILD_DIR) is a nice place to put files generated during the build.
With the advent of user-supplied step-hooks, they may want to store
some information on the build.
Export BUILD_DIR to that effect; update manual accordingly.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit introduces a virtual package called 'toolchain', located
in 'toolchain/toolchain', which simply depends on
'toolchain-buildroot' or 'toolchain-external' depending on the
selected toolchain backend.
For now, toolchain-buildroot and toolchain-external are still manual
make targets, but the following patches convert those backends to use
the package infrastructure as well.
In addition to this:
* The main Makefile is modified to always make BASE_TARGETS point to
this new toolchain virtual package.
* The main Makefile is changed to include all the toolchain/*/*.mk
files: the toolchain virtual package, and the toolchain-buildroot
and toolchain-external directories.
* The dependency of the toolchain on prepare dirs and dependencies is
moved to the toolchain virtual package. It is moved as a
prerequisite of the "toolchain-source" rule to ensure that all
directories are prepared before we even start extracting the
toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In order to avoid the work of converting the toolchain-crosstool-ng
logic to the package infrastructure, we remove it from Buildroot,
since it has been deprecated since quite some time.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 'make clean' recipe is using variables that are not defined without
.config file, causing only a partial cleanup when the .config file is
accidentally deleted.
This patch moves those variables that do not depend on values from .config
outside the BR2_HAVE_DOT_CONFIG check, so that 'make clean' is much more
similar with and without .config.
Since HOST_DIR is determined from BR2_HOST_DIR in .config, the host
directory cannot be cleaned correctly without making assumptions, if no
.config is present. However, to cover most people's use cases, we assume
the default value of $(BASE_DIR)/host in this specific case.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since STAGING_DIR is defined as (package/Makefile.in):
STAGING_SUBDIR = usr/$(GNU_TARGET_NAME)/sysroot
STAGING_DIR = $(HOST_DIR)/$(STAGING_SUBDIR)
removing HOST_DIR will automatically remove STAGING_DIR. This patch updates
'make clean' based on this knowledge.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 'make help' lines for generating the manual did not consider ePub
correctly. Instead of providing a limitative list for 'make manual', the
text is changed into 'all formats'.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The -s option is only mandatory for the charmap,
else the filename is always empty and nothing
is generated.
Signed-off-by: Thierry Bultel <thierry.bultel@wanadoo.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The $(BUILD_DIR)/.root rule is executed as part of the 'dirs'
target. The 'dirs' target is re-executed at every execution of 'make
external-deps', and make external-deps explicitly tells make to ignore
targets that have already been made (through the -B option). This
means that the $(BUILD_DIR)/.root rule has to be idempotant, which was
not the case this the introduction of the lib32/lib64 symbolic link.
Running 'make external-deps' three times in a row was sufficient to
trigger an error due to symbolic links being incorrectly created. This
patch fixes that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Similar to how we do it for _PATH / _SYSROOT_DIR. Buildroot gets fairly
confused if the user has set up a custom PKG_CONFIG_LIBDIR, so ensure
it gets unset.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Make 3.82 no longer sort the result of wildcards (see
http://comments.gmane.org/gmane.comp.gnu.make.bugs/4260). This may break
build reproducibility.
This patch sort results of wildcards to ensure reproducibility.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In the past there may have been a very good reason to refer to 'buildroot2', but
these days it's just odd.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libpthread.so has a special stripping condition to preserve parts of
it that are needed for debugging. However, due to the usage of 'xargs'
instead of 'xargs -r', the strip command is executed regardless of
whether a libpthread.so file is found or not. This leads to a big
error message being displayed in static-only builds, because strip is
executed without a file argument. Thanks to the '|| true', the build
continues, but still shows a big error message in the middle, which is
not nice.
By using 'xargs -r', we avoid the strip command from being executed
when 'find' doesn't find any match. We also remove the '|| true' to
catch other real errors.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Always link lib64 or lib32 to lib
* Only copy the architecture's lib directory to staging
* Also cleanup a couple of mkdirs (concerning some 'lib' directories).
Before this patch:
$ ls -ld host/usr/x86_64-buildroot-linux-gnu/sysroot/{,usr/}lib* target/{usr/,}lib*
drwxr-xr-x 2 samuel users 4.0K Aug 12 22:26 host/usr/x86_64-buildroot-linux-gnu/sysroot/lib/
drwxr-xr-x 2 samuel users 4.0K Aug 12 22:27 host/usr/x86_64-buildroot-linux-gnu/sysroot/lib64/
drwxr-xr-x 5 samuel users 4.0K Oct 30 2012 host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/
drwxr-xr-x 5 samuel users 4.0K Aug 12 22:27 host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib64/
drwxr-xr-x 3 samuel users 4.0K Oct 30 2012 host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/libexec/
drwxr-xr-x 2 samuel users 4.0K Aug 12 22:27 target/lib/
lrwxrwxrwx 1 samuel users 3 Aug 12 22:27 target/lib64 -> lib/
drwxr-xr-x 2 samuel users 4.0K Aug 12 22:27 target/usr/lib/
lrwxrwxrwx 1 samuel users 3 Aug 12 22:27 target/usr/lib64 -> lib/
$ find . -type l -xtype l # find broken symlinks
find: `./host/usr/x86_64-buildroot-linux-gnu/sysroot/lib64/lib': Too many levels of symbolic links
find: `./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib64/lib': Too many levels of symbolic links
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libnss_files.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libnss_nis.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libnss_compat.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libnss_nisplus.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libutil.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libthread_db.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libcidn.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libcrypt.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libm.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libnss_hesiod.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libnsl.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/librt.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libnss_db.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libanl.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libBrokenLocale.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libnss_dns.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libresolv.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libdl.so
./target/etc/resolv.conf
./target/dev/log
After this patch:
$ ls -ld host/usr/x86_64-buildroot-linux-gnu/sysroot/{,usr/}lib* target/{usr/,}lib*
drwxr-xr-x 2 samuel users 4.0K Oct 30 2012 host/usr/x86_64-buildroot-linux-gnu/sysroot/lib/
lrwxrwxrwx 1 samuel users 5 Aug 12 22:36 host/usr/x86_64-buildroot-linux-gnu/sysroot/lib64 -> lib/
drwxr-xr-x 5 samuel users 4.0K Oct 30 2012 host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/
lrwxrwxrwx 1 samuel users 5 Aug 12 22:36 host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib64 -> lib/
drwxr-xr-x 3 samuel users 4.0K Oct 30 2012 host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/libexec/
drwxr-xr-x 2 samuel users 4.0K Aug 12 22:36 target/lib/
lrwxrwxrwx 1 samuel users 3 Aug 12 22:36 target/lib64 -> lib/
drwxr-xr-x 2 samuel users 4.0K Aug 12 22:36 target/usr/lib/
lrwxrwxrwx 1 samuel users 3 Aug 12 22:36 target/usr/lib64 -> lib/
$ find . -type l -xtype l # find broken symlinks
./target/etc/resolv.conf
./target/dev/log
Fixes http://autobuild.buildroot.net/results/23fb6b1479d2b5906b72c9437b06ab4700ff246d/
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit fde2605765 (Makefile: test before search for kernel modules)
changed the way we strip kernel modules, but it fails when modules aren't
available (as test -d returns with a non zero exit code).
Fix it by including the test -d call in a proper shell conditional.
Reported-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The 'find $(TARGET_DIR)/lib/modules' used to find and strip kernel
modules fails when no kernel modules have been installed. While the
'|| true' prevents the entire build from failing, there are still some
error messages displayed, which is not nice.
Instead, test if the directory exists before doing the find. We also
remove the '|| true' in order to really abort the build if a
problematic error occurs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
'cut' needs to be invoked with the -s option to make sure it doesn't
print anything when the delimiter isn't found. This is particularly
important for the charmap detection, because UTF-8 is appended if
the charmap is empty. But without -s, it will never be empty.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch moves the host-ccache build target from BASE_TARGETS in Makefile
to an actual host prerequisite in support/dependencies. This causes
host-ccache to be built as part of the dependencies, before any real package
is built.
Since the dependencies are built without ccache anyway, there is no need to
set HOST_CCACHE_CONF_ENV anymore.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a new goal that dumps all of our variables.
Taken from http://www.cmcrossroads.com/ask-mr-make/6521-dumping-every-makefile-variable
Signed-off-by: Emeric Vigier <emeric.vigier@savoirfairelinux.com>
[yann.morin.1998@free.fr: drop per-variable print; refresh patch]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The -perm +mode is deprecated, and sometimes yields suprising results.
It can be confused with permission in symbolic mode, for example '+u+g',
as POSIX spec suggests.
Signed-off-by: Tzu-Jung Lee <tjlee@ambarella.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
