Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We support a busybox-menuconfig target so that the BusyBox
configuration can be adjusted as needed. However, depending
on what other packages are enabled, re-installing BusyBox
symlinks that duplicate "real" apps after the configuration
change can result in bad behaviors:
* At best, the BusyBox applet will be used after the
install, versus the desired "real" app.
* At worst, the built rootfs can become unbootable.
The BusyBox install.sh has some capability to avoid this issue
by means of a --noclobber option. By default, this option is
disabled. When enabled, the install.sh will not overwrite a
target file with a symlink or hardlink, be it an actual file
or a previously installed BusyBox link.
The install.sh's argument processing is somewhat broken, so this
patch simply changes the default value of the noclobber option
to on, rather than add --noclobber to the install.sh invocation.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some drivers (like ti-gfx) need fbset and we can't select it when we
use BusyBox because it is provided by BusyBox and as a package.
Signed-off-by: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Spenser Gilliland" <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The correct capitalised form appears to be "BusyBox" rather than "Busybox";
fix all references to the latter form. (Most such references occur in the
manual and in commentary in package makefiles.)
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The musl C library does not yet implemented the getpwent_r() function,
needed by the Busybox password code when CONFIG_USE_BB_PWD_GRP is
disabled. So we enable it when the musl C library is used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The three typical packages that use .config files in buildroot copy the
config file at different times in the build process:
busybox copies its .config from the post-extract hook.
linux copies its .config in the configure_cmds.
uclibc copies its .config from the post-patch hook.
Copying the .config file from the configure step is the only way to properly
support an OVERRIDE_SRCDIR that does not yet have the .config file, because
the extract and patch steps are skipped in that case.
For example, when setting a BUSYBOX_OVERRIDE_SRCDIR to a cleanly extracted
busybox tarball:
$ make busybox-dirclean busybox
rm -Rf [..]/output/build/busybox-custom
>>> busybox custom Syncing from source dir
>>> /home/tdescham/repo/contrib/busybox-1.21.1
rsync -au --exclude .svn --exclude .git --exclude .hg --exclude .bzr
--exclude CVS /home/tdescham/repo/contrib/busybox-1.21.1/
[..]/output/build/busybox-custom
>>> busybox custom Configuring
/bin/sed -i -e "/\\<CONFIG_NOMMU\\>/d"
[..]/output/build/busybox-custom/.config
/bin/sed: can't read [..]/output/build/busybox-custom/.config:
No such file or directory
make: *** [[..]/output/build/busybox-custom/.stamp_configured] Error 2
This patch modifies busybox.mk to copy the config file from the configure
step instead, as linux is doing, and fixing the described scenario.
This fixes bug #5030: https://bugs.busybox.net/show_bug.cgi?id=5030
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported on IRC, our default busybox configuration doesn't support SHA
encoded passwords, breaking login if enabled under system configuration.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If $(BUSYBOX_CONFIG_FILE) is read-only (eg. because Buildroot's
source dir is), the sed fixups to $(BUSYBOX_BUILD_CONFIG) fail.
Fixes: #4363
Signed-off-by: Nathan Lynch <ntl@pobox.com>
[yann.morin.1998@free.fr: use $(INSTALL) instead of cp]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Suppress the following error:
route: SIOCDELRT: No such process
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Eliminate the following error message on every boot:
grep: /etc/resolv.conf: No such file or directory
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In order to keep better track of when a feature got deprecated, and hence
when it can be removed, a new set of symbols BR2_DEPRECATED_SINCE_xxxx_xx is
introduced. These symbols are automatically selected when BR2_DEPRECATED is
selected, and thus are transparent to the user.
A deprecated feature will no longer depend on BR2_DEPRECATED directly, but
rather on the appropriate BR2_DEPRECATED_SINCE_xxxx_xx. If that symbol does
not yet exist, it has to be created in Config.in.
When removing a deprecated feature, one should also check whether this was
the last feature using the BR2_DEPRECATED_SINCE_xxxx_xx symbol, in which
case the latter can be removed from Config.in.
A followup patch will make sure the overview is added to the list of
deprecated features in the manual, so that a buildroot core developer can
easily determine which features to remove in a given development cycle.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable the busybox touch --no-dereference since it requires lutimes
support and breaks old toolchains that don't support it (example:
avr32). Probably nobody cares that much since it's a new feature. Fixes:
http://autobuild.buildroot.net/results/9c2/9c29379719ae5cf5800c0dcb4cf514c5dc15d9b6/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch fixes the following whitespace problems in Config.in files:
- trailing whitespace
- spaces instead of tabs for indentation
- help text not indented with tab + 2 spaces
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* The PID file is not created unless the '-m' option is passed to
start-stop-daemon.
* Remove the mark '-m 0' option as it's not supported by busybox's
syslogd.
* Syslogd and Klogd forks to background by default giving as a result
that the pid stored in the PID file is not correct. Let the
background job be done by 'start-stop-daemon' by passing '-n'
(foreground) to the daemons and '-b' to start-stop-daemon. This
way the pid stored in the PID files is correct.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Those patches have been submitted upstream.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Set busybox .config CONFIG_NOMMU appropiately and streamline this new
setting with the previous BUSYBOX_DISABLE_MMU_APPLETS in a single
BUSYBOX_SET_MMU definition (since it's not just applets now).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's also done in the kernel configuration, however users may be using
some other pre-built kernel and miss functionality like firmware
loading.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The kernel headers are part of the staging directory, so there is no
reason to point the Busybox CFLAGS directly to them.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When udhcpc is used on multiple network devices at the same time (or a mix
of dhcp and fixed configuration), /etc/resolv.conf should contain the
union of information from all the interfaces.
Currently that's not the case. The udhcpc script simply overwrites
resolv.conf with the information from the specific interface on each dhcp
bound/renew event.
Fix it by tagging lines with the interface they came from when added,
and drop the affected lines on deconfig/renew. As /etc/resolv.conf is
often a symlink to /tmp (and rootfs might be read only), special care
has to be taken when it is updated.
Notice that I'm not really aware of any official documentation requiring
that '#' comments in /etc/resolv.conf must be supported, but atleast
glibc and uClibc do.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
ifconfig up is a no-op if the device is already running, so let's just
do that unconditionally.
Systems might have multiple network devices, and perhaps run udhcpc on
another interface even when booted over nfs, so don't disable the
per-interface deconfig based on the global nfsroot= setting on the kernel
command line.
If you don't want udhcpc to mess with kernel level IP autoconfiguration
(E.G. for nfs boot), you should instead ensure udhcpc/ifup/ifplugd isn't
started for that interface.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We're currently using two different udhcpc scripts, one in the busybox
package and another in the avahi one, which calls avahi-autoipd on
dhcp failures.
The avahi one actually only does something differently from the default
if avahi-autoipd is available, so let's just always use this one instead
of the complicated logic about writing the file if not present /
overwriting it afterwards.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update the mdev patch so that subsystem matching is reintroduced.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
On commit 5538e47662 the versioned package
patches changed the directory structure but the packages weren't fixed.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Don't change the busybox STATIC option if buildroots PREFER_STATIC_LIB option
is not set. Not to prefer static linking doesn't imply prefer dynamic linking
for all packages.
Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The BusyBox watchdog application supports reset periods specified in
milliseconds. The Buildroot package will only allow an integer reset period,
which prevents the use of the required "ms" suffix. Change the watchdog period
configuration item to a string, to allow the use of the "ms" suffix.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Before the config file can be copied, it has to exist. The
other xxx-update-config targets do this as well.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Busybox does partial linking of its modules before linking everything
together into the binary. Those partial links are done without the
standard libraries, but that also means -ltirpc can't be found. In
addition, this probably fails horribly with static linking (untested).
The problem is that the LDFLAGS are also used in the partial links.
So instead, use CFLAGS_busybox, which is only used for the busybox
link step. Also make sure that this is passed through the environment,
not on the command line, so the busybox Makefile can still append to
it.
Fixes e.g.
http://autobuild.buildroot.net/results/e8351e3ba86fdcdb2999548658271a6fde0526a9
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of making the Busybox configuration more complicated by trying
to adjust it depending on whether RPC is available or not (which gets
complicated when RPC support can be provided by libtirpc), simplify
things by letting the user enable FEATURE_NFS_MOUNT or not depending
on whether RPC support is available or not.
Our default configuration do not enable FEATURE_NFS_MOUNT, so users
will not face any build problems by default. Only if they explicitly
enable FEATURE_NFS_MOUNT will they have to make sure that the
toolchain has RPC support, or that libtirpc is enabled (support for
this added in a followup patch).
[Peter: remove from CONFIGURE_CMDS as well]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since we have now two uncompatible init systems, and we want only one of
them at the same time in use in the rootfs, we need to select a
particular init system. This patch also adds $(PKG)_INSTALL_INIT_SYSTEMD
and $(PKG)_INSTALL_INIT_SYSV hooks that are called when the matching
init systems are selected to install properly the init scripts of the
package.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add version 1.20.0, remove deprecated 1.16.x & 1.17.x versions and mark
1.18.x as deprecated.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Busybox used to declare and create files even if the package was not
enabled through the device table. Remove the entries for busybox in the
device table and move them to the package declaration.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Our default mdev.conf file in package/busybox has lines like:
pcm.* root:audio 660 =snd/
event[0-9]+ root:root 640 =input/
that are used to create the device is the appropriate /dev
subdirectory. However, this feature requires
CONFIG_FEATURE_MDEV_RENAME to be enabled, otherwise mdev complains
with:
mdev: bad line 25
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The original name busybox-update is confusing as it only updates a
configuration file.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thanks to the pkgparentdir and pkgname functions, we can rewrite the
GENTARGETS macro in a way that avoids the need for each package to
repeat its name and the directory in which it is present.
[Peter: pkgdir->pkgparentdir]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Drop stale config file for busybox 1.13.x
Add build system and syslogd fixes for 1.19.2
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add busybox version 1.19.2 for the 1.19.x branch.
Remove deprecated 1.15.x branch.
Mark 1.16.x and 1.17.x branches deprecated as suggested by Thomas.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The S01logging script currently displays the start/stop messages like this:
Start logging :OK
The normal form for these messages is:
Start logging: OK
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Without an mdev.conf file installed, mdev generates some /dev entries in
an incorrect or non-standard way. Some examples:
1. /dev/null has permissions 660, but it should be accessible to normal
users;
2. alsa devices get created in /dev, not /dev/snd as is more common,
and as the default value of BR2_PACKAGE_ALSA_LIB_DEVDIR suggests;
3. event<N> files are created in /dev, not /dev/input.
This mdev.conf is a selection from the examples provided in the busybox
sources with minor tweaks.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The logging mechanism startup being in inittab, it isn't easy to
overcharge the default policy. With this patch, the startup of the
syslog daemon is moved to an init.d script, that can easily be
overwritten.
[Peter: use install -D]
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove this quirk since the tested code is no longer present in busybox
since 1.10.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This code is no longer useful, since the oldest version supported by
Builroot is 1.16.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The swaponoff applet doesn't build (and doesn't make sense) on non-MMU
platforms.
The ash shell cannot build on non-MMU platforms (because it uses
fork()), so select the hush shell instead.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Four methods for the creation of device files in /dev are now
proposed:
- static method uses device table as before
- devtmpfs method enables this feature in kernel
- mdev method adds mdev starting script to the file system
and selects mdev itself for installation
- udev method selects udev for installation
All dynamic methods are based on devtmpfs, so one doesn't need to care
about /dev folder.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
