Signed-off-by: Christian Stewart <christian@paral.in>
[Atul:
- Removed the duplicate conditional block.
- Updated the license to GPLv2.
- Removed the visibilty of package from menuconfig.
- Removed dependencies.
- Removed the comment.
- Changed the name of variable from BR2_PACKAGE_AUFS_STANDALONE_VERSION
to BR2_LINUX_KERNEL_EXT_AUFS_VERSION.
- Removed the AUFS_INSTALL_STAGING and AUFS_INSTALL_TARGET variables.
- Removed the BR2_PACKAGE_AUFS_3X and BR2_PACKAGE_AUFS_4X variables.]
Signed-off-by: Atul Singh <atul.singh.mandla@rockwellcollins.com>
[yann.morin.1998@free.fr:
- do not fail on version check if aufs ext is disabled
- check for empty version
- squash aufs package and linux extension in one patch
- fail if the kernel already has aufs support
- simplify handling of version]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
[Thomas:
- Fix the apply patch logic, it was using a non-existent
AUFS_VERSION_MAJOR variable. BR2_PACKAGE_AUFS_SERIES is used
instead.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We used to do a special handling of Linux kernel modules when stripping
target binaries because there's some special precious data in modules
that we must keep for them to properly operate. This is for example true
for stack unwinding data etc.
It turned out there're cases when our existing "strip --strip-unneeded"
doesn't work well. For example this removes .debug_frame section used by
Linux on ARC for stack unwinding, refer to [1] and [2] for more details.
Now Linux kernel may strip modules as a part of "modules_install" target
if INSTALL_MOD_STRIP=1 is passed in command line. And so we'll do
allowing kernel decide how to strip modules in the best way.
Still note as of today Linux kernel strips modules uniformly for all
arches with "strip" command, so this commit alone doesn't solve
mentioned problem but it opens a possibility to add later a patch to the
kernel which will strip modules for ARC differently - and that's our
plan for mainline kernel.
[1] https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/issues/86
[2] http://lists.busybox.net/pipermail/buildroot/2016-September/172161.html
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Daniel Mentz <danielmentz@google.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Properly propagate the Xenomai dependencies to the corresponding kernel
extension, to fix the following unmet dependencies:
warning: (BR2_LINUX_KERNEL_EXT_XENOMAI) selects BR2_PACKAGE_XENOMAI
which has unmet direct dependencies (BR2_PACKAGE_XENOMAI_ARCH_SUPPORTS
&& BR2_TOOLCHAIN_HAS_THREADS && !BR2_TOOLCHAIN_USES_MUSL)
While at it, move the comment lower, after the path option, so that the
path option is properly indented in the menuconfig.
Add markers to separate each extension.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's been deprecated for quite some time now.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 73da2ff6f7.
The reason for adding support for a local location was to be able to do
development on the Linux kernel source tree on a local directory rather
than have to clone it for every build.
We already have a mechanism for that, it's called override-srcdir. It's
been available since September 2011, more than a year before this patch
was committed.
Otherwise, we're going to be adding support for local sources in other
packages. First was U-Boot as submitted by Adam. But what next? We can't
have such support for all packages, especially since override-srcdir
does the job.
Besides, using a local source tree makes the build non-reproducible, so
we don't really want to have this in a .config (or defconfig).
We only handle the boolean option in legacy, as there is nothing we can
do with the directory path.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Rafal Fabich <rafal.fabich@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The cpupower linux tool needs gettext, always (even without locales).
We need to disable NLS, otherwise it tries to compile the .po files.
We also need to pass -lintl, otherwise it forgets to link with it
(because, the world is glibc-only, you did not know? And glibc does not
need we link with -lintl, so why would we? Oh, yes, we also reinvented
our super intelligent one-off Makefile rather than use one of the
standard buildsystems).
Fixes#9181:
CC utils/helpers/sysfs.o
In file included from utils/helpers/amd.c:9:0: ./utils/helpers/helpers.h:13:21: fatal error: libintl.h: No such file or directory
#include <libintl.h>
^
Without NLS=false (yes, we could depend on host-gettext):
MSGFMT po/de.gmo
make[3]: msgfmt: Command not found
Without LDFLAGS=-lintl:
CC cpupower
./utils/cpupower.o: In function `main':
cpupower.c:(.text.startup+0x1a4): undefined reference to `libintl_textdomain'
./utils/idle_monitor/cpupower-monitor.o: In function `list_monitors':
cpupower-monitor.c:(.text+0x5dc): undefined reference to `libintl_gettext'
./utils/cpupower-set.o: In function `cmd_set':
cpupower-set.c:(.text+0x38): undefined reference to `libintl_textdomain'
./utils/cpupower-info.o: In function `cmd_info':
cpupower-info.c:(.text+0x20): undefined reference to `libintl_textdomain'
collect2: error: ld returned 1 exit status
Reported-by: Joergen Pihlflyckt <Jorgen.Pihlflyckt@ajeco.fi>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Joergen Pihlflyckt <Jorgen.Pihlflyckt@ajeco.fi>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To configure the Linux kernel, we currently provide two options:
1. Passing a defconfig name (for example "multi_v7"), to which we append
"_defconfig" to run "make multi_v7_defconfig".
2. Passing a path to a custom configuration file.
Unfortunately, those two possibilities do not allow to configure the
kernel when you want to use the default configuration built into the
kernel for a given architecture. For example, on ARM64, there is a
single defconfig simply called "defconfig", which you can load by
running "make defconfig".
Using the mechanism (1) above doesn't work because we append
"_defconfig" automatically.
One solution would be to change (1) and require the user to enter the
full defconfig named (i.e "multi_v7_defconfig" instead of "multi_v7"),
but we would break all existing Buildroot configurations.
So instead, we add a third option, which simply tells Buildroot to use
the default configuration for the selected architecture. In this case,
Buildroot will configure the kernel by running "make defconfig".
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The endianess of the Linux kernel should be based on BR2_ENDIAN, so that
it is automatically built for the right endianness.
Signed-off-by: Ofer Heifetz <oferh@marvell.com>
[Thomas: tweak commit message, add comment in .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: don't use the helper.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit ab74e09eb4 renamed the dtc host tool
provided by linux to linux-dtc to avoid clashes with the dtc host tool
provided by host-dtc.
However, external scripting may well rely on the existence of a device tree
compiler as $(HOST_DIR)/usr/bin/dtc, regardless of its source. Changing
these external scripts to use linux-dtc means that the scripts need to be
aware of the buildroot release they are working with, which is not very
nice.
Add a symlink dtc->linux-dtc when no $(HOST_DIR)/usr/bin/dtc is present.
When host-dtc is not enabled, the end result will be dtc and
linux-dtc representing the same thing.
When host-dtc is enabled, either it is build before linux and no symlink
is created at any time, or it is build after linux, and the 'install'
command in host-dtc will overwrite the symlink with a proper dtc. In both
cases, the end result will be dtc and linux-dtc representing a different
thing.
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The target "$(LINUX_DIR)/.stamp_initramfs_rebuilt" uses its own
'cp' command, instead of LINUX_INSTALL_IMAGE/LINUX_INSTALL_IMAGES_CMDS
provided by (or updated with) commit 055e6162bb ("linux: don't build
appended DTB image in place and support multiple images") and thus is
not operating properly when APPENDED_DTB is used.
Indeed, it copies a single image, and does not copy the one with the DTB
appended.
This patch replaces the 'cp' command with LINUX_INSTALL_IMAGE which
handles APPENDED_DTB.
Fixes: 055e6162bb ("linux: don't build appended DTB image in place and
support multiple images")
Signed-off-by: Sebastian Frias <sf84@laposte.net>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When setting BR2_LINUX_KERNEL_LATEST_VERSION, it is hard for the user to
know that this version is subject to change in the future.
Explicit this in the Kconfig entry text.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since quite some time, the kernel and bootloader communities consider
zImage as the default format for kernel images on ARM, replacing
uImage. The load address information in uImage is no longer needed,
since the kernel is position-independent in terms of physical address,
except on a few old platforms. For most people, using zImage is simply
better/simpler, so let's switch to zImage as the default image format
on ARM.
All defconfigs are updated: 46 defconfigs no longer need to select
explicitly zImage because it's the default, and 16 defconfigs now need
to explicitly select uImage because that's no longer the default.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Matt Weber <matt@thewebers.ws>
Acked-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds the ability to compile and install the kernel
selftests into the target at /usr/lib/kselftests. The rationale behind
/usr/lib is that the selftests have subdirectories where they are
installed which makes them unsuitable to be placed in /usr/sbin as
this would result in /usr/sbin/kselftests/x/y/z. While the selftests
aren't libraries either, they don't achieve much as a standalone
binary so they can be considered to be a 'library of tests' making
/usr/lib sensible.
The selftests require that the kernel headers be installed into the
kernel build tree as some of the selftests have a hardcoded CFLAGS to
include kernel headers (CFLAGS += -I../../../../usr/include/). This is
most easily achieved by using the make ... headers_install inside the
kernel build dir.
This is likely to be a rarely used debugging/performance feature for
development and unlikely to be used in a production configuration.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas:
- remove bash as a build dependency, it is only a runtime dependency.
- fix typo in the Config.in help text, and rewrap
- add missing 'depends on BR2_USE_MMU' dependency for the comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Forcefully disable the features that have optional dependencies that are
not enabled in Buildroot.
Disable support for bionic since, well, we're not Android.
Slightly re-order the variables to have semantically-related variables
together, with features last.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
perf does not honour the -j flags we pass to make; it yet again tries to
reinvent the wheel and by default uses the number of CPUs as the number
of parallel jobs.
Fortunately, in their infinite wisdom, the insane developpers of the
perf buildsystem were kind enough to provide us with a variable we can
set to specify the number of parallel jobs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The perf buildsystem, inside the kernel, is not really amenable to be
easily used...
Regarding the documentation, it will forcefully try to detect asciidoc
and, with the latest versions, xmlto, completely disregarding what the
user may provide.
We currently pass ASCIIDOC= (the empty string) on the make command line,
as an attempt to disable building the documentation, but that has no
effect whatsoever on perf: that variable is not passed down to the
sub-sub-make (yes, a two-level depth) that is responsible for building
the documentation.
We really do not want to build any of the documentation (the user can
refer to the documentation on his own development machine), so we use a
little dirty trick: we provide a GNUmakefile beside the existing
Makefile for the documentation; GNUmakefile always takes precedence over
a Makefile when both are present. We only provide a catch-all-no-recipe
rule in that GNUmakefile, so it really does nothing useful, except avoid
building the documentation.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We need to pass an argument to ld for setting the endianness when
building it for MIPS architecture, otherwise the default one will always
be used (which is big endian) and the compilation for little endian will
always fail showing an error like this one:
LD foo.o
mips-linux-gnu-ld: foo.o: compiled for a little endian system and target
is big endian
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Kernels older than 3.9 (not counting stable releases) used the
timeconst.pl perl script for their build process.
The problem with this script is that it used deprecated perl features,
namely defined(@array) which was removed for the perl 5.22 release,
causing build failure of older kernels on newer distributions.
To fix this instead of going the hard way (moving to the new
timeconst.bc script) use the easy way by patching timeconst.pl with an
upstream patch used for stable releases.
First try a dry-run on the patch to see if it applies, if it does then
call a proper APPLY_PATCHES to it.
Tested against an arbitrary 2.6.30 kernel (applies and builds), against
4.4.1 for a missing timeconst.pl (does not apply since it's missing) and
3.8.13 (does not apply since it's fixed already).
Known broken distributions: fedora 23, debian testing (stretch) and unstable
(sid).
Signed-off-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is no longer meaningful, now that we have the option to use the
kernel version for the linux headers, as it is more logical and more
versatile.
Add it to legacy.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the Vivante kernel driver split from the kernel source code in
order to make it possible to be used in any kernel source since 3.10.53.
The driver source code provided by Freescale needs fixes so the
community forked the code to allow faster development and easier
integration of fixes from the community.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/32cf391https://github.com/Freescale/meta-fsl-arm/commit/4249193
This package has been tested with the following commands:
# modprobe galcore
# cd /usr/share/examples/viv_samples/vdk/
# ./tutorial7
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some heavily (and most often improperly) modified Linux kernels may export
new APIs to userland, so as to speak to custom hardware or custom kernel
facilities.
However, we currently have no easy way to use such kernels as a source
for the linux-headers package, which precludes having those userland
headers intalled for userland applications to use them.
We do have a way for the kernel to use the same version as for the
headers, but that is definitely not enough, as the linux-headers package
has a version choice that is far less versatile and capable than that of
the linux package.
Add a new option for the linux-headers package, for the user to specify
that the version (really, the sources) of the kernel be used to install
the headers from.
We do that by making linux-headers patch-depend on the linux package.
We can't have linux-header simply depend on linux, because the simple
dependency means the the dependee will be configured, built and installed
before the dependent is configured. And since linux is a target package,
it depends on the toolchain, which internally dependes on linux-headers,
which would depend on linux, and we'd get a circular dependency.
Using patch-depend will ensure that linux is extracted and patched
before linux-headers is extracted, which is really all we need.
Then, we install the headers from the linux source tree, rather than
from linux-headers' source tree (as there's nothing in there!).
Since we need to install a private set for uClibc (see cde947f, uclibc:
prevent rebuilding after installation to staging), we explicitly set
INSTALL_HDR_PATH when calling the kernel' install-headers rule in
LINUX_HEADERS_CONFIGURE_CMDS, so that the headers are installed in
linux-headers' $(@D) instead of linux' $(@D).
Finally, as there is no way to know the kernel version in this case, we
must still prompt the user for the kernel series the headers are from
(like we do for a custom version) and check for consistency at build
time.
Note however that this still leaves users that want to built their
such-kernel outside of Buildroot out in the cold.
[Peter: drop comment as suggested by Thomas]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Karoly Kasza <kaszak@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some fine version control systems make all files read-only. The custom DTS file
may therefore be read-only, and that permission is preserved when copying into
the Linux build directory. A subsequent rebuild tries to 'cp' again, which
fails with a "Permission denied" error unless the -f option is used.
Signed-off-by: Hollis Blanchard <hollis_blanchard@mentor.com>
Acked-by: Nikolay Dimitrov <picmaster@mail.bg>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The perf tool installed test files in
output/target/usr/libexec/perf-core/tests/
which amounted to about 30+K.
Since they are not needed for normal perf operation, remove them.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, packages that need the kernel to have support for laodable
modules have two ways to require it:
- either the use the kernel-module infra, which does it automatically,
- or they do not use it, and they need to require it manually by
setting the corresponding Makefile variable; however, they must only
set it when they are actually enabled, which makes for a slightly
cumbersome and ugly code, like:
ifeq ($(BR2_PACKAGE_FOO),y)
LINUX_NEEDS_MODULES = y
endif
Introduce a new blind Kconfig option that packages can select to signify
they need kernel modules. That Kconfig option is then used to set the
Makefile variable.
It makes it cleaner:
- code is simpler (one Kconfig line instead of a Makefile if-block,
- this is handled at the Kconfig level, which is where we usually
handle such dependencies.
Packages will be updated in follow-up commits.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix improper use of qstrip; use correct variables.
Fixes#8546.
Reported-by: craigswank@gmail.com
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
[yann.morin.1998@free.fr: move the kconfig-package hunk to the
corresponding patch]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the linux.mk logic for appended DTB image does the
appending of the DTB in place, directly at the end of the zImage using
a >> sign. This is incorrect because if you run "make linux-rebuild"
multiple times, you get the DTB appended over and over again to the
image.
Since keeping the 'zImage' or 'uImage' name for the appended DTB image
is not very clear, this commit moves to using the 'zImage.<dtb>' and
'uImage.<dtb>' format. This way, we can clearly distinguish the
original image from the appended one.
In addition, this naming scheme easily allows to generate *multiple*
appended DTB images: from one zImage, you can generate multiple
zImage.<dtb> for several DTBs, and then generate (if requested) the
corresponding uImage.<dtb>.
To achieve this, this commit:
- Changes the definition of LINUX_APPENDED_DTB to iterate over
$(KERNEL_DTS_NAME), and generate a zImage.<dtb> image for each of
them.
- Changes the addition of LINUX_APPENDED_DTB for appended uImage to
also iterate over $(KERNEL_DTS_NAME).
- Provide a different implementation of LINUX_INSTALL_IMAGE which
installs all the appended DTB images (but not the bare image)
- Remove the checks that verified that only one DT name is passed
when appended DTB is used, since we now support generating multiple
DT images.
Some of the tested configuration:
- Normal uImage with several DTBs
BR2_LINUX_KERNEL_DEFCONFIG="mvebu_v7"
BR2_LINUX_KERNEL_UIMAGE=y
BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x200000"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="armada-xp-matrix armada-xp-gp armada-370-mirabox"
Contents of output/images/:
armada-370-mirabox.dtb armada-xp-gp.dtb armada-xp-matrix.dtb uImage
- Normal zImage with several DTBs
BR2_LINUX_KERNEL_DEFCONFIG="mvebu_v7"
BR2_LINUX_KERNEL_ZIMAGE=y
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="armada-xp-matrix armada-xp-gp armada-370-mirabox"
Contents of output/images:
armada-370-mirabox.dtb armada-xp-gp.dtb armada-xp-matrix.dtb zImage
- Appended uImage with several DTBs:
BR2_LINUX_KERNEL_DEFCONFIG="mvebu_v7"
BR2_LINUX_KERNEL_APPENDED_UIMAGE=y
BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x200000"
BR2_LINUX_KERNEL_INTREE_DTS_NAME="armada-xp-matrix armada-xp-gp armada-370-mirabox"
Contents of output/images:
uImage.armada-370-mirabox uImage.armada-xp-gp uImage.armada-xp-matrix
- Appended zImage with several DTBs:
BR2_LINUX_KERNEL_DEFCONFIG="mvebu_v7"
BR2_LINUX_KERNEL_APPENDED_ZIMAGE=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="armada-xp-matrix armada-xp-gp armada-370-mirabox"
Contents of output/images:
zImage.armada-370-mirabox zImage.armada-xp-gp zImage.armada-xp-matrix
In all configurations, the contents of output/target/boot/ was the
same if BR2_LINUX_KERNEL_INSTALL_TARGET=y.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When you're using the "appended DTB" mode, the Device Tree blob gets
appended to your kernel image, so there is no point in installing both
the DTB and the kernel image to the images or target directories,
installing the kernel image itself is sufficient.
Therefore, this commit disables the definition of LINUX_INSTALL_DTB
when appended DTB is used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the LINUX_INSTALL_DTB and LINUX_INSTALL_DTB_TARGET macros
are exactly the same, except for the target directory.
Similarly, LINUX_INSTALL_KERNEL_IMAGE_TO_TARGET and
LINUX_INSTALL_IMAGES_CMDS are copying the kernel image, just to a
different place (and with a different strategy).
As a preparation for future additions, this commit de-duplicate this
code:
- LINUX_INSTALL_DTB becomes a make macro that takes one argument: the
destination directory.
- LINUX_INSTALL_IMAGE is a new make macro that also takes on
argument: the destination directory.
Both macros are used by LINUX_INSTALL_KERNEL_IMAGE_TO_TARGET and
LINUX_INSTALL_IMAGES_CMDS to respectively install to the target
directory and the images directory.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Linux for MIPS supports raw binary zboot image (vmlinuz.bin).
Add it to the "Kernel binary format" list.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This selection will ensure that the correct host tools
will be build used for the kernel compression method used.
[Maxime: Select the compression opts in the kernel config too ]
Signed-off-by: Sagaert Johan <sagaert.johan@proximus.be>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998 at free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
On aarch64, the image name is always Image, so let's add support for
that.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
So it doesn't conflict with host-dtc. The Linux kernel version may be a
patched version supporting E.G. overlays.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since v4.0 the fbtft drivers are included in the linux kernel
staging area.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When a package wants to build a kernel module, we should ensure that the
kernel does support modules.
This patch does it automatically for packages using the kernel-module
infrastructure.
Packages that do not use it will have to set it manually (to be done in
a followup patch).
Suggested-by: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Noé Rubinstein <noe.rubinstein@gmail.com>
Cc: Jan Viktorin <viktorin@rehivetech.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Both of CONFIG_NF_CONNTRACK and CONFIG_NF_CONNTRACK_MARK are needed by
xtables-addons.
Although the current code does enable them in the linux' .config file,
the former is protected behind CONFIG_NETFILTER_ADVANCED, which may be
missing from a user-supplied (def)config file, and is missing from some
of the bundled defconfigs as well.
For example, the following defconfig fails to build:
BR2_TOOLCHAIN_EXTERNAL=y
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_DEFCONFIG="i386"
BR2_PACKAGE_XTABLES_ADDONS=y
So, also force-enable CONFIG_NETFILTER_ADVANCED.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Linux buildsystem tries to run the compiler even just for
'kernelrelease' (which we store in LINUX_VERSION_PROBED) and we
sometimes need to use it before the toolchain is available; thus
we get spurious errors on stderr.
Consign stderr to oblivion when computing the 'kernelrelease'.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Verified that LINUX_VERSION_PROBED is only used in "-quoted commands
(actually, usually it's not quoted).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the perf package and add legacy handling.
[Thomas:
- improve the Config.in.legacy help text
- improve the comment explaining why we pass O= when building perf]
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch is based on the patch send by James Knight:
http://lists.busybox.net/pipermail/buildroot/2015-May/128754.html
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: James Knight <james.knight@rockwellcollins.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit add an infrastructure to build linux kernel
tools available in the kernel sources.
Currently, the only linux kernel tool packaged in Buildroot
is perf and it's packaged as a separate generic package.
This is a problem for licence information raised in this
thread [1].
Since these tools require to build a Linux kernel, we can
use some hooks in linux package like we did for linux
extensions [2] and remove the perf package.
[1] http://lists.busybox.net/pipermail/buildroot/2015-May/128783.html
[2] http://lists.busybox.net/pipermail/buildroot/2015-March/121835.html
[Thomas: fix minor typos in comments.]
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If we check that the user provides a config file after we call to the
kconfig-package infra, the error message we get is the one for the
kconfig-package infra, not the custom error message we want to show to
the user.
So, only call kconfig-package after we do the check. Move the check with
the existing checks for the DTS, for consistency.
[Thomas: put the checks together, but right before the kconfig-package
call, rather than in the middle of the code, were the DTS related
tests were located.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, this is triggering the error message:
make randconfig
make source
Limit the checks that enforce a DTS is set and at most one DTB is
appended to when we are actually building, like is done for the
configuration-file variables.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ktap package requires some parts of the kernel tracing
infrastructure to be enabled, especially
CONFIG_EVENT_TRACING. However, this option is a blind option in the
kernel, so enabling it in linux.mk has no effect: we need to enable a
non-blind option that selects CONFIG_EVENT_TRACING. We've chosen to
select CONFIG_ENABLE_DEFAULT_TRACERS.
This fixes the build of ktap.
[Thomas: use CONFIG_ENABLE_DEFAULT_TRACERS as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This one is a bit tricky, as the version can come from the linux-headers
package, so we must also account for that.
We currently have no hash file for linux, but better do the change now,
which allows us to later add a hash file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of manually testing MAKECMDGOALS, use the newly introduced
BR_BUILDING variable to know if we're building or not.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This commit removes BR2_LINUX_KERNEL_EXT_RTAI_PATCH because this
option never worked. It was added in commit
8797a9cd1f, which added package/rtai/
and RTAI as a Linux extension.
The option prompt says "Path for RTAI patch file", so let's say you
specify /home/foo/bar/myrtai.patch as the value for
BR2_LINUX_KERNEL_EXT_RTAI_PATCH.
Then the code does:
RTAI_PATCH = $(call qstrip,$(BR2_LINUX_KERNEL_EXT_RTAI_PATCH))
and we have a package called 'rtai', so the normal logic of
<pkg>_PATCH applies. Since the <pkg>_PATCH value does not contain
ftp://, http:// or https://, the package infrastructure will try to
download $(RTAI_SITE)/$(RTAI_PATCH), i.e:
https://www.rtai.org/userfiles/downloads/RTAI/home/foo/bar/myrtai.patch
Pretty clear that it has no chance of working.
Now, let's assume an URL is used as the value of
BR2_LINUX_KERNEL_EXT_RTAI_PATCH, such as
http://foo.com/bar/myrtai.patch. In this case, it will be properly
downloaded by the package infrastructure. But then, the following code
kicks in:
define RTAI_PREPARE_KERNEL
$(APPLY_PATCHES) \
$(LINUX_DIR) \
$(dir $(RTAI_PATCH)) \
$(notdir $(RTAI_PATCH))
endef
The value of $(dir $(RTAI_PATCH)) will be http://foo.com/bar/. How
can $(APPLY_PATCHES) make use of such a stupid patch location?
[Thomas: add Config.in.legacy handling, as suggested by Arnout, even
if we believe that no-one could have ever used this option.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
linux has uImage generation support for powerpc64 as well as powerpc,
since 2.6.15.
Signed-off-by: Erico Nunes <erico.nunes@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes fbtft kernel extension bug reported by Richard Fergusson ([1]):
drivers/video/Kconfig:2525: can't open file
"drivers/video/fbdev/fbtft/Kconfig"
Fix: write the right fbtft/KConfig path to video/Kconfig or
video/fbdev/Kconfig (instead of hard coded one)
[1] http://lists.busybox.net/pipermail/buildroot/2015-January/117057.html
Reported-by: Richard Fergusson <fergie4000@gmail.com>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Curently, all three linux extensions follow the same layout:
- test if the extension is enabled
- add itself to linux' patch-dependencies
- declare a macro, added as the pre-patch hook
Except for the macro, all can be commonalised.
Add a simple infrastructure for that:
- extensions declare themselves in the list of extensions
- extensions define their macro
- the infra adds them to the patch-dependencies and pre-patch
hooks as appropriate
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the move to the kconfig-package infra, linux extensions are
broken.
In our linux package, extensions are applied as pre-patch hooks.
Before the kconfig-package infra, we had custom rules for the
linux-*config targets, which were of the form:
linux-menuconfig: linux-configure
$(MAKE) -C $(LINUX_DIR) menuconfig
This caused the linux tree to be fully configured before running the
configurators, and thus linux dependencies were entirely fullfilled, and
extensions were properly applied.
Since we migrated (in dff25ea), the kconfig-package infra introduces a
(hidden, internal) intermediate step 'kconfig-fixup' and decorelates the
kconfig-part of the configuration from the actual package-part of the
configuration:
linux-configure -------> kconfig-fixup --> .config --> $(LINUX_CONFIG_FILE)
/
linux-menuconfig --'
As thus, this (very useful!) use-case breaks (starting from a clean
Buildroot tree):
make menuconfig
-> enable a kernel and at least one extension
-> save and exit
make linux-menuconfig
-> extensions are not available
Fix that by using the newly-introduced patch-dependencies, so that
extensions are available before we try to patch the linux kernel.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix issues noticed by Arnout:
- Rewrap the linux/Config.in paragraph
- Revert the "is a toolchain dependency" -> "has a toolchain
dependency" change from pkg-generic.mk, as the original was
correct.]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Several packages have some logic to apply custom patches that existed
before the BR2_GLOBAL_PATCH_DIR mechanism: at91bootstrap,
at91bootstrap3, barebox, uboot and linux. Currently, the logic of
those packages to apply custom patches is to match
<package-name>-*.patch, which is not consistent with what we've done
for patches stored in the package directory, and for patches stored in
BR2_GLOBAL_PATCH_DIR: in such cases, we simply apply *.patch.
Therefore, for consistency reasons, this commit changes these packages
to also apply *.patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This commit doesn't touch infra packages.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The linux package has a special handling of patches, with quite a bit
of legacy in it. A problem caused by this special handling is that the
linux package calls directly the DOWNLOAD_WGET macro, which means that
the package infrastructure isn't aware of which patches get
downloaded, and it prevents doing changes inside the package download
infrastructure.
This commit changes the handling of patches in the linux package in
the following way:
* The LINUX_PATCHES variable is kept as is: it lists all the patches
mentioned in the Config.in option BR2_LINUX_KERNEL_PATCH. This
option can contain http://, ftp://, https:// URLs, path to local
files or local directories.
This variable is *not* used by the generic package infrastructure,
so it is purely internal to the Linux package.
* The LINUX_PATCH variable is now filled in with the list of patches
that should be downloaded. It is derived from LINUX_PATCHES by
filtering the patches that have http://, ftp:// or https:// in
their path. Since <pkg>_PATCH is handled by the package
infrastructure, it means that those patches are now automatically
downloaded and applied by the package infrastructure.
* The LINUX_APPLY_PATCHES hook is renamed to
LINUX_APPLY_LOCAL_PATCHES, because it is now only responsible of
applying local patches: remote patches are handled by
LINUX_PATCH. The implementation of the hook is changed to filter
out the patches that have already taken care of by LINUX_PATCH, so
that we only iterate through the list of local patches or local
patch directories.
[Thomas: adjust comment in the code according to Yann comments.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reword the help text and get ride of the supported kernel
version list which is outdated since Xenomai version bump.
[Thomas: rewrap text to the appropriate length, fix some typos.]
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If you have several linux patches directories, Buildroot does not stop
if one patches of the first directories don't apply. This patch fixes
this.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The recommended form is without the trailing slash. Buildroot will add a slash
between FOO_SITE and FOO_SOURCE as appropriate.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE can either be a complete
.config file or a defconfig file, it can be confusing to the user
whether to choose BR2_LINUX_KERNEL_USE_DEFCONFIG or
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG.
To avoid that confusion, clarify Kconfig entry messages for in-tree
defconfig and custom (def)config files.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When building device tree blobs from custom *.dts files, buildroot
initializes KERNEL_DTS_NAME variable from all given file names.
This causes that user can't provide one *.dts file and some other
*.dtsi files as dependencies.
Problem is fixed by adding filter for initializing KERNEL_DTS_NAME
variable with *.dts files only. All user provided files are copied
into kernel source tree, but only file names suffixed with *.dts
are used for building appropriate *.dtb files.
[Thomas: add comment into the code to explain why we are filtering
.dts files only.]
Signed-off-by: Ivo Slanina <ivo.slanina@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When Buildroot is configured to append the root filesystem to the Linux
kernel as initramfs, Buildroot sets the path to the initramfs source
dynamically in the Linux configuration file.
As this path is specified as an absolute path, typically being different
for different users of the same project (e.g. containing a username),
saving the configuration to a version control system (for example using
'make linux-update-defconfig') would result in a difference for this
path at every invocation by a different user.
Although this is technically not an issue, it is confusing that this
generates a difference.
Address this issue by using a not-yet-expanded make variable to specify
the path to the initramfs source. That variable will be expanded by the
Linux build system, which uses it both as a Makefile variable and a
shell variable; thus, it needs to be specified in LINUX_MAKE_ENV (so
it is exported and available in sub-processes of make). Any saved
configuration file would simply contain the reference to the
not-yet-expanded variable.
As in the Linux build system, the config variables are both read from
make as from a shell script, we cannot use $() syntax as this would be
interpreted as a command invocation by the shell. Instead, use ${}
syntax which is interpreted as variable reference both by the shell as
by make.
[Thomas:
- Really make the patch work by using $(LINUX_MAKE_ENV) instead of
$(TARGET_MAKE_ENV). Otherwise, the new BR2_BINARIES_DIR variable is
not passed at all stages of the build process, which makes the
build fail when an initramfs is used.]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: "Yann E. Morin" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Migrate the linux package to the kconfig infrastructure.
A notable change compared to the original behavior:
- the targets linux-update-(def)config are now always saving the config
file, even for a defconfig bundled in the linux sources. This is done
to keep the kconfig infrastructure simple.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: "Yann E. Morin" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Even though this is not strictly necessary with the current version of
linux.mk, it becomes necessary when migrating linux.mk to the kconfig
infrastructure.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: "Yann E. Morin" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The help text for Linux option 'Custom tarball' only refers to ftp or
http tarballs, while in reality file or scp protocols are also
supported.
Triggered by a recent support question, update the help text to clarify
this.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patches located at ftp or http(s) URLs were downloaded using DOWNLOAD
macro. For example, if linux source was located at external git
repository, DOWNLOAD macro uses git scheme as well and buildroot
tried to downlod a path using DOWNLOAD_GIT macro. As a result, nothing
was downloaded and build siletly passes.
Patches located at mentioned URLs is now downloaded directly with
DOWNLOAD_WGET macro.
Signed-off-by: Ivo Slanina <ivo.slanina@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patches located at https:// scheme URL were threated as directories,
causing build failures.
Fixed by adding https:// pattern.
Signed-off-by: Ivo Slanina <ivo.slanina@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Enable the required conntrack/netfilter options, otherwise
xtables-addons will fail to build.
The basic iptables options are already covered by the iptables package
which is a required dependency anyway.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Enable the basic kernel options for iptables to be useful at least to
filter incoming connections.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested with RaspberryPi B+ and PiTFT Mini Kit - 320x240 2.8" TFT
(see [1] and [2]) and the following target configuration changes:
- cmdline.txt: add 'fbcon=map:10 fbcon=font:VGA8x8'
- add /etc/modules-load.d/fbtft.conf with 'fbtft_device'
- add /etc/modprobe.d/00-fbtft.conf with 'options fbtft_device name=adafruit28 rotate=90 gpios=dc:25'
[1] http://h65951.serverkompetenz.net/PeterSeiderer/upload/PiTFT_2_8_ct/Image9893.jpg
[2] http://h65951.serverkompetenz.net/PeterSeiderer/upload/PiTFT_2_8_ct/Image9897.jpg
[Thomas:
- Rename prompt of the Linux extension to "FB TFT drivers"
- Remove the full name of the kernel config options in the help
text. Giving their CONFIG_<foo> name is enough.
- Remove the mention of CONFIG_SPI_BCM2708, since this makes the
description RaspberryPi specific, while these drivers can work
with any SPI controller.
- Refactor the code in linux-ext-fbtft.mk to avoid duplication
between the < 3.15 and >= 3.15 cases.
- Make the fbtft package a promptless package, since there is no
point in selecting only this package, without the kernel
extension.
- Change the license to GPLv2, since it's kernel code.]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When using a custom local tree, we're using the OVERRIDE_SRCDIR
internally, which means we do not apply patches. Since this is the
expected behavior, make BR2_LINUX_KERNEL_PATCH and
BR2_LINUX_KERNEL_CUSTOM_LOCAL options exclusive.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current prompt seems to imply that we want to add Device Tree
support to the Linux kernel:
[*] Device tree support
But what it really means is that Buildroot will build a DTB.
Change the prompt so that it is obvious that this is the intended
behaviour, and users do not get mislead as to why Device Tree support is
not automatically added to their Linux kernel.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Unbreak qemu_xtensa_lx60_defconfig where LINUX_IMAGE_NAME !=
LINUX_TARGET_NAME.
It incorrectly overwrites LINUX_IMAGE_NAME even if it was set before,
defeating the purpose of IMAGE being different than TARGET.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When running 'make printvars', the output stops at the time we dump the
Linux related variables, with:
linux/linux.mk:109: *** Recursive variable `LINUX_TARGET_NAME'
references itself (eventually). Stop.
And that's expected, since we have:
109 LINUX_TARGET_NAME = $(LINUX_IMAGE_NAME)
[...]
112 ifeq ($(LINUX_IMAGE_NAME),)
113 LINUX_IMAGE_NAME = $(LINUX_TARGET_NAME)
114 endif
Even though they are defined in a way that ensures they are in fact not
recursively defined (the if-block ensures that), 'printvars' does dump
all our variables by evaluating all of them, which in that specific case
implies they are recursively defined.
Fix that by explicitly setting LINUX_IMAGE_NAME in each if-block.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To easy up adding optional parameters when calling the
"apply-patches.sh" add and use the "APPLY_PATCHES" variable to execute
the script.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Buildroot coding style defines one space around make assignments and
does not align the assignment symbols.
This patch does a bulk fix of offending packages. The package
infrastructures (or more in general assignments to calculated variable
names, like $(2)_FOO) are not touched.
Alignment of line continuation characters (\) is kept as-is.
The sed command used to do this replacement is:
find * -name "*.mk" | xargs sed -i \
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*$#\1 \2#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\]\+\)$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\ \t]\+\s*\\\)\s*$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\(\s*\\\)#\1 \2\3#'
Brief explanation of this command:
^\([A-Z0-9a-z_]\+\) a regular variable at the beginning of the line
\([?:+]\?=\) any assignment character =, :=, ?=, +=
\([^\\]\+\) any string not containing a line continuation
\([^\\ \t]\+\s*\\\) string, optional whitespace, followed by a
line continuation character
\(\s*\\\) optional whitespace, followed by a line
continuation character
Hence, the first subexpression handles empty assignments, the second
handles regular assignments, the third handles regular assignments with
line continuation, and the fourth empty assignments with line
continuation.
This expression was tested on following test text: (initial tab not
included)
FOO = spaces before
FOO = spaces before and after
FOO = tab before
FOO = tab and spaces before
FOO = tab after
FOO = tab and spaces after
FOO = spaces and tab after
FOO = \
FOO = bar \
FOO = bar space \
FOO = \
GENIMAGE_DEPENDENCIES = host-pkgconf libconfuse
FOO += spaces before
FOO ?= spaces before and after
FOO :=
FOO =
FOO =
FOO =
FOO =
$(MAKE1) CROSS_COMPILE=$(TARGET_CROSS) -C
AT91BOOTSTRAP3_DEFCONFIG = \
AXEL_DISABLE_I18N=--i18n=0
After this bulk change, following manual fixups were done:
- fix line continuation alignment in cegui06 and spice (the sed
expression leaves the number of whitespace between the value and line
continuation character intact, but the whitespace before that could have
changed, causing misalignment.
- qt5base was reverted, as this package uses extensive alignment which
actually makes the code more readable.
Finally, the end result was manually reviewed.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Cc: Yann E. Morin <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
change remaining occurrences of _OPT into _OPTS.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the trailing slash is stripped from $($(PKG)_SITE) by pkg-generic.mk:
$(call DOWNLOAD,$($(PKG)_SITE:/=)/$($(PKG)_SOURCE))
so it is redundant.
This patch removes it from $(PKG)_SITE variable for BR consistency.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The linux-* mirror targets of linux26-* have been added a very long time ago
(2010) and linux 2.6 is now considered 'old' anyway. It no longer makes
sense to support these linux26-* targets, so this patch removes them.
This is a simplification introduced in preparation of the kconfig-package
infrastructure.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix minor typo in help text.]
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The new variable LINUX_TARGET_NAME is unconditionally used but it may be
unset leading to a default kernel build (which might not be uImage or
other requested format).
See http://lists.busybox.net/pipermail/buildroot/2014-July/102069.html
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For example the upcoming qemu-xtensa patch is using this feature,
where the target is called "zImage", but the resulting kernel name
is "Image.elf".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The echo statements in the kconfig helpers are currently using double
quotes. For KCONFIG_SET_OPT this is problematic when the value argument
itself contains a double quote (a string value). In this case, the statement
echo "$(1)=$(2)" >> $(3)
would become:
echo "FOO="string value"" >> /some/path/.config
resulting in the string
FOO=string value
in the config file, rather than the properly quoted
FOO="string value"
The linux package worked around this by escaping the quote characters, but
a prettier solution is to use single quoting in the helpers (or
alternatively use no quoting at all).
A side effect of this change is that a $variable in the key or value would
no longer be interpreted by the shell, removing any unexpected behavior.
This change is only really necessary for KCONFIG_SET_OPT, but for symmetry
reasons the other helpers are updated too.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This enables powerpc64 and powerpc64le. Currently, le needs at least
glibc 2.19 and gcc 4.9.0. For gdb, 7.7.1 works (added in an earlier
patch).
[Peter: also disallow gcc 4.8 for ppc64le]
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Starting from U-Boot v2014.04 ARC architecture is supported,
so now it's possible to create uImage for ARC as well.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- fix networking in Qemu using a small patch
- disable DTS, because linux.bin does not include any DTB the
default Qemu included DTB is used and this is okay and works fine
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
SMACK stands for Simplified Mandatory Access Control Kernel. It is a Linux
Security Module which provides a Mandatory Access Control mechanism,
like SELinux, but aiming towards simplicity.
This package provides the tools to load/unload the policy from the
kernel as well as a library allowing applications to interact with
SMACK. The proper kernel options are also set.
[Thomas:
- fixed license to be LGPLv2.1 instead of LGPLv2.1+. Even though the
debian/copyright file has the "or later" indication, none of the .c
source files carry it, so I suppose LGPLv2.1 is more correct.
- added !BR2_PREFER_STATIC_LIB dependency.
- added dependency on host-pkgconf, since Smack configure.ac uses
PKG_CHECK_MODULES.]
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The "dirs" dependency is redundant because now the "generic-package"
infrastructure add automatically the "dirs" dependency so just remove
the redundant references.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As stated in the Buildroot user manual add one space before and after
a = sign.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit ca80782f45. The
whole host-lzop optional dependency logic cannot work, since the
configuration file will only be known after the kernel sources are
extracted, if an internal kernel defconfig is used, which is quite
common.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit b4cacbf5b1. The
whole host-lzop optional dependency logic cannot work, since the
configuration file will only be known after the kernel sources are
extracted, if an internal kernel defconfig is used, which is quite
common.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 477c28cf1d. The
whole host-lzop optional dependency logic cannot work, since the
configuration file will only be known after the kernel sources are
extracted, if an internal kernel defconfig is used, which is quite
common.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 4ad1ea59a5. The
whole host-lzop optional dependency logic cannot work, since the
configuration file will only be known after the kernel sources are
extracted, if an internal kernel defconfig is used, which is quite
common.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The KCONFIG_GET_OPT calls added by
ca80782f45 ('linux: only depend on
host-lzop if needed') are made even if the kernel package is not
selected. This hangs the linux.mk parsing as they try to read from a
file that doesn't exist.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
... and abort early, before we even use it.
Reported-by: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There is no reason to always depend on host-lzop, even when the kernel
compression is not LZO.
Since LZO is not the default compression option in the kernel (and there
is not sign that will change in the foreseeable future), it will always
appear in a config file, whether it is a complete config file or it is
only a defconfig.
So, only depend on host-lzop if the LZO compression is enabled in the
kernel config file (either the defconfig or the custom config file).
This includes:
- kernel compression itself
- initrd compression
- initramfs compression
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When systemd is chosen as init system, the required kernel features are
enabled.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
