Add hash file and drop upstreamed patch.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Previous to this patch, if BR2_PACKAGE_DHCP_CLIENT was selected,
dhcpd.service was installed to the target on systemd systems.
On the resultant system, this would mean that systemctl would
show an error starting dhcpd.service, as the requisite files
do not exist. This does not cause issue on sysvinit systems
as the init scripts silently error when the files aren't found.
Fix this by adding a conditional check to the install define.
Signed-off-by: Nathaniel Roach <nroach44@gmail.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The previous no-op dhclient-script is useless and in fact can lead
users to believe things will work.
dhclient-script is supposed to, among many other things, bring the
interface up for dhclient to pump an address, set the interface
address, set resolv.conf appropiately and set the default gateway.
It's a complex script since it has to deal with a lot of details so
let's just use the best fit which is the OpenWRT one since it uses the
"legacy" tools (ifconfig, route, ...) which can be easily provided by
busybox and/or net-tools.
There are newer and more feature-complete versions around but they
require full iproute2 ip and wouldn't fit as well with the busybox-only
approach.
License: likely GPLv2+
Source:
http://git.openwrt.org/?p=packages.git;a=blob;f=net/isc-dhcp/files/dhclient-script;h=4afebc0ad20ebac51c5baae5ed01c6713e3a0fd0;hb=HEAD
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
test a == b is not available in e.g. dash.
Command(s) used for editing:
q=\[\"\'\]
operand="${q}?[$]?[a-zA-Z0-9_\?]+${q}?" ## doesn't detect ${VAR}
test_expr="(\[\s+${operand}\s+)==(\s+${operand}\s+\])"
find . -type f -name '[SK][0-9][0-9]*' | \
xargs sed -r -e "s@${test_expr}@\1=\2@g" -i
Signed-off-by: André Erdmann <dywi@mailerd.de>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It interprets disable as enable and wreaks havoc since it changes the
behaviour of the build, for instance not using configured leases files
paths.
Thanks to Nathaniel Roach for pointing me to this problem.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Nathaniel Roach <nroach44@gmail.com>
Tested-by: Nathaniel Roach <nroach44@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a systemd service file to start dhcpd.
The network interfaces to listen on can be set via the variable
INTERFACES in /etc/default/dhcpd.conf. Example:
INTERFACES="eth0 eth1"
Also install a tmpfiles.d file to create /var/lib/dhcp/dhcpd.leases
(needed at dhcpd start-up).
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove --localstatedir=/var from all autotools packages where it is no longer
needed.
Also remove --localstatedir=/var/lib/dhcp from package dhcp. localstatedir is
used by dhcp to set the default directory for the leases files. This can also
be done by setting --with-*-lease-file=/var/lib/dhcp/*, which is done in
dhcp.mk.
A custom --localstatedir is left in:
* proftpd.mk
* mysql.mk
This is safe to do:
One of the good thing with autoconf is that if you pass:
--localstatedir=/var ... --localstatedir=/var/something
Then /var/something will be used. So, we can set --localstatedir=/var
by default in the infrastructure, and still have certain packages doing
weird things override it. [Thanks to Thomas Petazzoni]
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_CONF_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use IPv6 file locations consistent with those set for IPv4 instead of keeping
the defaults, which use different locations.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The built dhcp binaries and the installed startup scripts used configuration
files under /etc/, but the configuration files were installed under /etc/dhcp/.
Fix everything to have configuration files under /etc/dhcp/.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also install the SysV initscripts from the proper hook.
Since the scripts check for the proper files to be present there's no
need to exclude them according to options since they won't try to start
anything.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In the Config.in file of package foo, it often happens that there are other
symbols besides BR2_PACKAGE_FOO. Typically, these symbols only make sense
when foo itself is enabled. There are two ways to express this: with
depends on BR2_PACKAGE_FOO
in each extra symbol, or with
if BR2_PACKAGE_FOO
...
endif
around the entire set of extra symbols.
The if/endif approach avoids the repetition of 'depends on' statements on
multiple symbols, so this is clearly preferred. But even when there is only
one extra symbol, if/endif is a more logical choice:
- it is future-proof for when extra symbols are added
- it allows to have just one strategy instead of two (less confusion)
This patch modifies the Config.in files accordingly.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Revamp initscripts see bug #3601
* Trim whitespace
* Check for installed binary (dhcp-relay)
* Check for installed config (dhcp-server)
* Check for proper variable setup from the script (both)
* Add "FAIL" message when startup fails (blind OK isn't accurate)
* Add start/stop messages to dhcp-relay
Switch bool to "dhcp (ISC)" to keep in line with package sorting.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Install dhcp to staging so other applications can use its include files
and libraries.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch creates a config option for the ISC DHCP server to allow passing
--enable-delayed-ack to its configure script.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump dhcp to version 4.1-ESV-R7 to fix CVE-2012-3955
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to version 4.1-ESV-R4 to fix CVE-2011-4539
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thanks to the pkgparentdir and pkgname functions, we can rewrite the
AUTOTARGETS macro in a way that avoids the need for each package to
repeat its name and the directory in which it is present.
[Peter: pkgdir->pkgparentdir]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Closes#3181
When install -D is used (to ensure destination dirs exists), the destination
file name has to be given as well.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
dhcp 3.0.5 was causing build issues due to its build system not based
on the autotools. Instead of work-arounding dhcp 3.0.5 issues, this
commit bumps to 4.1.1 which uses the autotools as the build
system. The package is therefore converted to the autotools
infrastructure.
The dhcp_xecute patch is no longer needed, this feature seems to have
been merged into the upstream dhcp (according to the manpage).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The cleanup of $(TARGET_DIR)/usr/share/man, $(TARGET_DIR)/usr/man,
$(TARGET_DIR)/usr/share/info, $(TARGET_DIR)/usr/info,
$(TARGET_DIR)/usr/share/doc and $(TARGET_DIR)/usr/doc is already done
globally in the main Makefile. Therefore, there's no need to handle
that on a per-package basis.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A C library will have been built by the toolchain makefiles, so there is no
need for packages to explicitly depend on uclibc.
Signed-off-by: Will Newton <will.newton@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
