Docker compose up outputs terminal control characters intended for
interactive output viewing.
Wget similarly can use the -q option to produce quieter logs.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Docker compose is now invoked as "docker compose" not "docker-compose."
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/3249828442
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the output of `cargo vendor` to generate the vendor configuration.
Fixes the need to patch the generated configuration if there are
non-crates.io dependencies.
Note:
`cargo vendor` currently prints a newline before it prints the
needed configuration.
This is fixed in +nightly, will end up in +stable soon and must
be considered when updating cargo.
See: https://github.com/rust-lang/cargo/pull/11273
Until then it is needed to remove this first line to make sure
that the contents of .cargo/config will be the same as they were
generated with the earlier version of the script. Thus, the
hashes of the packages that use this script remain the same.
Signed-off-by: Simon Richter <simon.richter@ptwdosimetry.com>
[yann.morin.1998@free.fr: add comment in rust-bin.mk and rust.mk]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Startig with glibc 2.34, the gconv modules description has been split in
two:
- a common definition in the old location, /usr/lib/gconv/gconv-modules
- specific definitions in a subdirectory, /usr/lib/gconv/gconv-modules.d/
This is done so as to simplify the handling of glibc gconv modules, and
eventually to segregate those outside of glibc, and so that third-parties
may also provide their own gconv converters and their definitions.
And starting with that same glibc version, most of the gconv modules
definitions are moved to an extra configuration file in that
sub-directory.
It is thus no longer possible to use special code pages, like cp850,
which are very useful to access FAT-formatted devices.
Add support for this new gconv layout, while keeping support for older
glibc versions. Note that the modules themselves are not moved or
renamed, just the definition files have changed.
Instead of passing the one old gonv modules definitions file on stdin,
we pass the base directory to that file, and move into the script the
responsibility to find all the gconv definition files.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When only a subset of the glibc gconv modules are installed, we need to
generate a trimmed-down list of available modules. We currently use gawk
for that.
However, we are not using any GNU extension in that awk script, and it
happens to work as expected when using mawk (which has no GNU
extension).
Commit 11c1076db9 (toolchain: add option to copy the gconv libraries)
did not explain why it used gawk explicitly, and given the age for that
commit, we doubt we'd be able to have the involved participants recall
anything from that period...
Besides, gawk is not a requirement for Buildroot.
Switch over to using plain awk.
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Newest versions requires a bit more time to finish.
Signed-off-by: José Luis Salvador Rufo <salvador.joseluis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 25d865996d)
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Any .pyc files generated by the pycompile script during target
finalization are currently counted in the "Unknown" package,
because packages-file-list.txt only contains the source .py file.
If a .py file is added to filesdict, add the corresponding .pyc
file as well.
Signed-off-by: Michael Klein <m.klein@mvz-labor-lb.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Polkit has two directories that are used to store rules.
Add the second directory to the existing tests, to ensure
that both work in the future.
Signed-off-by: Daniel Lang <d.lang@abatec.at>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Check that dependencies that are DT_NEEDED by a program are
automatically copied by dracut. We use cramfs, the package,
as it is small and just depends on libz.
Test more than one dracut config file.
Reported-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thierry Bultel <thierry.bultel@linatsea.fr>
Cc: Adam Duskett <aduskett@gmail.com>
[Arnout: remove test for features that haven't been merged yet]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Since we do not pivot_root/switch_root from the cpio, whatever we get
in the rootfs was exactly what we got by listing the cpio archive.
Drop the test for the presence of pv, it's redundant.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thierry Bultel <thierry.bultel@linatsea.fr>
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
Due to a bug in the CodeSourcery ARM toolchain packaging, this
toolchain currently appears as available even for noMMU
configurations, which is obviously wrong. Due to this, the
bootlin-armv7m-uclibc.config fragment ends up using the CodeSourcery
ARM toolchain, which is obviously wrong for an ARM noMMU
configuration, causing a build failure when matching the toolchain
capabilities with the configuration.
Even though we will separately fix the CodeSourcery ARM toolchain
packaging, it makes sense to ensure that the
bootlin-armv7m-uclibc.config fragment explicitly selects the Bootlin
toolchain.
Reported-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This tests valdates that we can publish a message and read it back.
Signed-off-by: Marcus Hoffmann <marcus.hoffmann@othermo.de>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr:
- don't manually start mosquitto, there's a startup script for that
- don't pass custom timeout
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit bf0d8c9659)
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes flake8 errors:
support/scripts/pkg-stats:1013:133: E501 line too long (164 > 132 characters)
support/scripts/pkg-stats:1018:36: F541 f-string is missing placeholders
support/scripts/pkg-stats:1110:199: E261 at least two spaces before inline comment
For the first and the last one, we chose to split the long lines rather
than adding noqa: 501. Indeed, the long lines make it very unreadable,
and there are relatively natural places where the line can be broken.
Also split a line just below the second one in a similar way.
The f-string on 1018 doesn't need to be an f-string.
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
This is done either by switching to single quoted f-strings, triple
double quoted f-strings when needed, or simply single-quoted strings.
The renderer HTML is exactly identical before/after this commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-By: Sen Hastings <sen@phobosdpl.com>
Acked-By: Sen Hastings <sen@phobosdpl.com>
Within single-quoted f-strings, and within triple double quoted
strings, escaping all the double quotes is completely useless and
makes the code more difficult to read. Get rid of all this useless
escaping.
The renderer HTML is exactly identical before/after this commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-By: Sen Hastings <sen@phobosdpl.com>
Acked-By: Sen Hastings <sen@phobosdpl.com>
The python installer package isn't able to overwrite files of packges
that already exist, this causes problems when doing a rebuild or
update without a full clean.
To fix this we can use functionality from importlib to identify and
remove any conflicting python package files before installation.
We also need to use internals from python-installer, as we want to use
the same logic as pyinstaller uses internally for getting the scheme so
that we ensure we clean the correct package scheme (we want it to be the
same as the one we're installing)
Fixes:
Traceback (most recent call last):
File "/home/buildroot/buildroot/support/scripts/pyinstaller.py", line 69, in <module>
main()
File "/home/buildroot/buildroot/support/scripts/pyinstaller.py", line 61, in main
install(
File "/home/buildroot/buildroot/output/host/lib/python3.10/site-packages/installer/_core.py", line 109, in install
record = destination.write_file(
File "/home/buildroot/buildroot/output/host/lib/python3.10/site-packages/installer/destinations.py", line 207, in write_file
return self.write_to_fs(scheme, path_, stream, is_executable)
File "/home/buildroot/buildroot/output/host/lib/python3.10/site-packages/installer/destinations.py", line 167, in write_to_fs
raise FileExistsError(message)
FileExistsError: File already exists: /home/buildroot/buildroot/output/target/usr/lib/python3.10/site-packages/tinycss2/__init__.py
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Tested-by: Marcus Hoffmann <marcus.hoffmann@othermo.de>
[yann.morin.1998@free.fr:
- extend commit log about the use of the installer internals (the
symbols prefixed with '_')
- check path.files against explicitly None
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The python installer cli isn't able to overwrite files of packages
that already exist, this causes problems when doing a rebuild or
update without a full clean.
Since we need to add functionality to our pyinstaller.py script to fix
this issue we must also use pyinstaller.py for host python packages.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Tested-by: Marcus Hoffmann <marcus.hoffmann@othermo.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 7652817c93 updated the
documentation but forgot to update support/dependencies
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
It includes a simple test for the full cpio image, and a test of the
dracut image. To validate that the dracut image is a subset of the full
image, 'pv' is added to the image, and the test verifies that pv is not
part of the image. Note that the real rootfs is not mounted at the
moment, so pv is never available in the running image.
Systemd and other init systems are currently untested.
Signed-off-by: Thierry Bultel <thierry.bultel@linatsea.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The CPIO filesystem generated by the test_python_s3transfer test is
too large, and doesn't fit as an initramfs in the 256MB of RAM
available in the versatilepb machine. This causes a "Initramfs
unpacking failed: write error" when booting, and many files being
missing from the root filesystem, ultimately causing the test to fail.
It would make sense to switch all test cases to use ext2 + a
hard-drive, but for now, let's fix the few test cases that are causing
problems.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2884635126
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- drop superfluous# BR2_TARGET_ROOTFS_TAR is not set
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The CPIO filesystem generated by the test_python_botocore test is too
large, and doesn't fit as an initramfs in the 256MB of RAM available
in the versatilepb machine. This causes a "Initramfs unpacking failed:
write error" when booting, and many files being missing from the root
filesystem, ultimately causing the test to fail.
It would make sense to switch all test cases to use ext2 + a
hard-drive, but for now, let's fix the few test cases that are causing
problems.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2884635042
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- drop superfluous# BR2_TARGET_ROOTFS_TAR is not set
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The CPIO filesystem generated by the test_python_boto3 test is too
large, and doesn't fit as an initramfs in the 256MB of RAM available
in the versatilepb machine. This causes a "Initramfs unpacking failed:
write error" when booting, and many files being missing from the root
filesystem, ultimately causing the test to fail.
It would make sense to switch all test cases to use ext2 + a
hard-drive, but for now, let's fix the few test cases that are causing
problems.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2884635041
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- drop superfluous# BR2_TARGET_ROOTFS_TAR is not set
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In commit
9267b0f14d ("package/f2fs-tools: bump to
version 1.15.0"), f2fs-tools was bumped from 1.14.0 to 1.15.0.
It turns out that this version bump causes the output of dump.f2fs to
slightly change.
In version 1.14.0, it looked like this:
Info: Segments per section = 1
Info: Sections per zone = 1
Info: sector size = 512
Info: total sectors = 262144 (128 MB)
Info: MKFS version
"Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 2022"
Info: FSCK version
from "Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 20
22"
to "Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 20
22"
Info: superblock features = 0 :
Info: superblock encrypt level = 0, salt = 00000000000000000000000000000000
Info: total FS sectors = 262144 (128 MB)
Info: CKPT version = 70c101c3
Info: checkpoint state = 181 : trimmed nat_bits unmount
In version 1.15.0, it looked like this:
Info: MKFS version
"Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 2022"
Info: FSCK version
from "Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 20
22"
to "Linux version 5.4.0-124-generic (buildd@lcy02-amd64-089) (gcc version 9.4.0 (Ubuntu 9.4.0-1ubuntu1~20.04.1)) #140-Ubuntu SMP Thu Aug 4 02:23:37 UTC 20
22"
Info: superblock features = 0 :
Info: superblock encrypt level = 0, salt = 00000000000000000000000000000000
Info: Segments per section = 1
Info: Sections per zone = 1
Info: total FS sectors = 262144 (128 MB)
Info: CKPT version = b89f8bb
Info: checkpoint state = 181 : trimmed nat_bits unmount
You will notice that the message "Info: total sectors = 262144 (128
MB)" is no longer present, and only "Info: total FS sectors =
262144 (128 MB)" is not present.
Except our test case was precisely looking for this "Info: total
sectors" string in the output, causing the test to fail.
We fix this by simply matching on "Info: total FS sectors" now.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/2884634814
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Octave package test can occasionally fail due to timeout while testing
some octave modules. This commit slightly increase the timeout value
to reduce those failures.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit makes sure that the python-crossbar package pulls in the
right dependencies, based on the requirements-min.txt.
It does so by:
- Changing the 0002-Remove-idna-requirement patch by a more thorough
patch that drops all indirect dependencies from
requirements-min.txt, making it easier to have a 1:1 mapping
between lines in requirements-min.txt and Buildroot selects.
- Changing the
0003-crossbar-webservice-wap-use-markupsafe-instead-of-we patch to
update requirements-min.txt to indicate the new MarkupSafe
dependency. Here again, to have a 1:1 mapping between lines in
requirements-min.txt and Buildroot selects.
- Updating the Buildroot selects to match requirements-min.txt, with
relevant comments when it does not.
- Fixing up the Crossbar test case to no longer force autobahn to use
umsgpack. Instead, we now use the default of msgpack that is
expected by autobahn.
Fixes bug #14556, https://bugs.busybox.net/show_bug.cgi?id=14556.
Signed-off-by: Emile Cormier <emile.cormier.jr@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
python-scipy is moving to a meson build infrastructure, and requires
fortran cross-compilation. This commit extends the cross-compilation
configuration file generated for use by meson to add the "fortran",
"fortran_args" and "fortran_link_args" properties.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
construct is a Python library for declarative serialization/
deserialization of structured binary data.
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Test the scipy::io module, to demonstrate that runtime dependencies
are correct.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Importing the scipy module in the Python interpreter running in Qemu
takes quite a while on slow machine, so a timeout extension to 30
seconds is needed to make sure the test has the time to run.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This adds an optional linebreak at the vendor attribute in the CPE ID.
It should be noted this is purely for formatting/layout purposes
and does not actually insert any additional characters
(newline or otherwise) into the rendered text.
This means that even though the text renders across two lines,
copy-pasting will still yield one line of text.
example: https://sen-h.github.io/pkg-stats/c245575.html
see also: https://developer.mozilla.org/en-US/docs/Web/HTML/Element/wbr
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Change the test into a characterization test for all warnings and errors
get-developers can return when parsing the DEVELOPERS files.
It will be helpful when changing the behavior of get-developers to bail
out on all syntax checking warnings.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This test relies on the OLA Dummy plugin presenting a test device
and port. It starts the daemon, performs few configuration commands,
covers the Python bindings and also test the OLA web interface.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Arnout:
- Indent hash file with two spaces.
- Bump to 1.7.3 to fix build failure with recent GCC.
- Get from github instead of PyPI.
- Add host-meson and host-python-pythran dependencies.
- Properly propagate Config.in dependencies.
- Correct usage of BR2_INSTALL_LIBSTDCPP symbol.
- Remove F77, no longer used.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Guillaume:
- -lnpymath: npymath.ini localization problem
- -lnpyrandom resolution problem
- fix legal-info for latest version LICENSE.txt
- zlib is a scipy::io module runtime requirement
- update serie for scipy 1.8.1 (latest)
]
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
[Thomas:
- add runtime test
- drop dependency on OpenBLAS, which is not needed in a minimal
configuration
- remove PYTHON_SCIPY_NPY_PKG_CONFIG_PATH logic as it is no longer
needed
]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This attempts to re-implement the "sortable_hint" feature without
relying on words. The column headers and CVE expand/contract buttons
change color and cursor style on hover.
If Javascript is enabled:
Just like [PATCH 1/3] more rules are applied to the
generated stylesheet before content is loaded.
If Javascript is disabled:
The headers stay pearly white. :-)
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Sometimes a package can have a lot of CVEs.
Rather than have the CVE cell make a really tall row
(that means you have to scroll a bunch) this collapses the CVE
cell to a fixed size scrollable element with a
sticky button that lets you expand and collapse it.
If Javascript is enabled:
A stylesheet is generated and appended before content rendering,
amending the cells style to have a fixed height and overflow.
Also, the expand/contract button is unhidden.
This means the CVE cells are rendered in a collapsed state
instead of being rendered in an expanded state and then
slamming shut.
This avoids a "flash" and *helps* (vertically at least) manage CLS
(cumulative layout shift).
see: https://web.dev/cls/
If Javascript is disabled:
The cells stay fully open and the expand/contract button stays hidden.
Signed-off-by: Sen Hastings <sen@phobosdpl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit c4e6d5c8be (core: implement per-package SDK and target)
introduced leading TABs in that otherwise-space-indented script.
Convert all to spaces, for homogeneity
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Back many years ago, we developed an Eclipse plugin that simplified
the usage of Buildroot toolchains. Enabling the BR2_ECLIPSE_REGISTER=y
was registering the Buildroot toolchain into a special file in your
HOME folder that the Eclipse plugin would recognize to allow to
directly use the Buildroot cross-compiler.
This Eclipse plugin has not been maintained for years. The last commit
in the repository dates back from September 2017. Since then Eclipse
has moved on, and the plugin is no longer compatible with current
versions of Eclipse.
Also, Eclipse is probably no longer that widely used in the embedded
Linux space, as other more modern IDEs have become more popular.
All in all, it's time to say good bye to this Eclipse integration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is a simple test importing pyalsa, showing alsa library version and
attempting to list cards.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It's time to finally switch over globally to the new spacing format
that we have agreed on for the hash file, with 2 spaces as a separator
between fields.
This commit was mechanically generated using:
find . -type f -name '*.hash' | xargs sed -i 's%^md5[ \t]*\([^ \t]*\)[ \t]*\(.*\)$%md5 \1 \2%'
find . -type f -name '*.hash' | xargs sed -i 's%^sha1[ \t]*\([^ \t]*\)[ \t]*\(.*\)$%sha1 \1 \2%'
find . -type f -name '*.hash' | xargs sed -i 's%^sha256[ \t]*\([^ \t]*\)[ \t]*\(.*\)$%sha256 \1 \2%'
find . -type f -name '*.hash' | xargs sed -i 's%^sha512[ \t]*\([^ \t]*\)[ \t]*\(.*\)$%sha512 \1 \2%'
This commit can easily be backported on the LTS branch by re-running
the same commands, if needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 2e399893b4)
[Peter: drop Makefile change]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
