Version 1.6.2 now builds against headers >= 4.8.x. (Previously 5.5 was
required). Functionality might still be limited depending on the kernel version.
* altered note on updating
* disable building of tests
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Major Behavior Changes
- As a reminder for those upgrading from older releases, as of FRR 7.4
and beyond:
RFC 8212 is now enabled by default. BGP will not advertise or use
routes unless explicitly configured to do so with an export or import
policy.
All daemons
Minimum libyang version is now 1.0.184
bfdd
Profile support
Minimum TTL support
bgpd
RPKI now has support for VRFs
Add wide option to route show commands
Add ability to count filtered prefixes when using maximum-prefix
with new force option
Add ability to show selected bestpath routes for a given neighbor
with bestpath-routes option to neighbor show command
Add ability to specify message when admin downing a session with bgp
shutdown message MSG... command
Add IPv6 support for Flowspec
Add ability to shut down neighbor if RTT is too high with neighbor
<neigh> shutdown rtt command
Allow update-delay to be applied globally
Graceful Restart fixes
Stability and performance fixes
EVPN
Beginning of MultiHoming support; stay tuned
isisd
Add VRF support
Add support for Anycast-SIDs
Fix adjacency timer display overflow
ospfd
Segment Routing support for ECMP
Prevent crash if transferring config amongst instances
Various LSA-related fixes
pbrd
Add JSON support to commands
Add ability to match on DSCP/ECN fields
pimd
Add more JSON support to commands
Add support for MSDP SA forwarding
(s,g,rpt) ifchannel is now cleared when (*, G) prune is received
Fix IGMP querier election and IP address mapping
Fix missing mesh-group commands
Fix crash when RP is removed
staticd
Add support for Northbound API
zebra
Nexthop group support for FPM
Netlink batching support
Northbound support for RIB model
Backup nexthop support
Allow upper level protocols to request ARP
Add json output for zebra ES, ES-EVI and access vlan dumps
vtysh
Speed up output across daemons
Fix build-time errors for some --enable flags
Northbound / YANG
Filter and route-map support
OSPF model definition
BGP model definition
RPM Packaging
Moved RPKI to subpackage
Added SNMP subpackage
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update to use the official linux kernel v5.10 instead of an
out-of-tree kernel, and use the official U-Boot v2021.01 as the
bootloader. Provide two configuration files of genimage for different
boot flows:
- Boot from SD card (default)
- Boot from SPI flash
A boot script is generated to automatically boot the distro.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop dependency on gcc >= 4.8 for efl options as it is guaranted since
commit dbe2d2e686 which added a dependency
on gcc >= 4.9 for efl
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Both S40xorg and S90nodm tries to run an Xserver on vt1, causing the nodm
one to fail. If nodm is enabled, then that is likely what the user wants to
run, so skip installing S40xorg.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Drop second patch (already in version)
- Update hash of README, FrankAudiodata added and update in year:
76852b0214fdf19475c98f040b2ab890fd84da90
- Update indentation in hash file (two spaces)
https://brltty.app/doc/ChangeLog.txt
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit 7a607dab33
("support/scripts/pkg-stats: support generating stats based on
configured packages"), we added a -c option to pkg-stats to generate a
report based on the list of packages enabled in the configuration,
rather than for all packages.
This is done based on the list of packages returned in JSON format by
"make show-info". However, we use the keys of the JSON dict returned
by "make show-info", which include the host- prefix of host
packages. Due to this, none of the host packages are currently
matching and therefore they are not reported in the pkg-stats -c
output.
This commit fixes that by using the recently introduced "name"
property in the "make show-info" JSON dict.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: use anonymous '_' for unused variable]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit e5d3fc5a53)
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 551cb63007)
[Peter: drop Makefile changes]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The keys of the JSON dict returned by "make show-info" is the package
name, including the "host-" prefix for host packages.
However, it is sometimes useful to get the actual name of the package,
without the "host-" prefix, so we add a "name" property that holds the
"raw name" of the package.
Suggested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Disable documentation which is enabled by default since version 0.22 and
2e73e605f7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Replace INSTALL_DRIVERS_SYSCONF by INSTALL_DRIVER_SYSCONF which is the
correct name since version 18.2.0 and
81796c8a9e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BUILD_ALONG_WITH_CMRTLIB has been dropped since version 18.2.0 and
c3e13c175d
RUN_TEST_SUITE is also unrecognized (only MEDIA_RUN_TEST_SUITE is
recognized)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
So the normal DHCP-on-eth0 logic works for the graphical defconfig where
eudev is used.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To match minnowboard_max_defconfig.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Explicitly enable PCI support in the kernel after commit eb01d42a77785 (PCI:
consolidate PCI config entry in drivers/pci) and change to GPT partitions /
root=PARTLABEL to find the rootfs instead of hardcoding /dev/mmcblk2p2 as
the mmc probing order has changed since commit 21b2cec61c04bd1 (mmc: Set
PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4).
This has the additional advantage that the same image will work when written
to a USB drive instead of a microsd.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libgeos unconditionally uses wstring which raises the following build
failure:
In file included from /srv/storage/autobuild/run/instance-3/output-1/build/libgeos-3.9.0/tools/astyle/ASLocalizer.cpp:40:
/srv/storage/autobuild/run/instance-3/output-1/build/libgeos-3.9.0/tools/astyle/ASLocalizer.h:72:34: error: 'wstring' does not name a type; did you mean 'stdin'?
string convertToMultiByte(const wstring& wideStr) const;
^~~~~~~
stdin
Fixes:
- http://autobuild.buildroot.org/results/e97d03848d9bbf1845b994f391679a1dbf49f61e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump version and drop local patches already merged upstream. Add Linux
option needed by Linux version >= 4.20 package documentation and to .mk
file that automatically adds it to Linux config when building.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop upstream patch that is in new version.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The --cpeid option was mistakenly introduced by commit
92e7089a8c ("support/script/pkg-stats:
show CPE ID in results") but is in fact not necessary.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit bd665d182c
("support/scripts/pkg-stats: improve rendering of CVE information"),
we have better reporting of CVE related information, based on
pkg.status['cve']. However, this commit broke pkg-stats when the
--nvd-path option is not passed, and therefore no CVE information is
available.
This commit fixes that, by making use of the is_status_ok(),
is_status_error() and is_status_na() methods recently introduced.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Make is_status_ok() work when the given status name is not even listed
in the status dict. This will be necessary for following commits.
Introduced similar methods for the error and na status, which will be
used in following commits.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
also set the indentation to 2 spaces in hash file
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>