uClibc-ng does not support PIE for some architectures as
arc and m68k. It isn't implemented in the static linking case, too.
With musl toolchains you might have static PIE support with little
patching of gcc. Static linking for GNU libc isn't enabled in
buildroot. Fixup any package using special treatment of PIE.
(grep -ir pie package/*/*.mk)
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: use positive logic.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package adds the SGX demos from Imagination Technologies, they are
available as binaries only.
This package contains binaries compiled for the SGX graphics accelerator used
in the following Texas Instruments SoCs: AM335x, AM437x, AM4430, AM5430.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump the pinned docker-containerd version to the latest in advance
of the introduction of docker-engine v1.12.0-rc4.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is The Linux UPnP Internet Gateway Device 2. It is
modified from the original Linux UPnP Internet Gateway Device
[http://linux-igd.sourceforge.net/] according to UPnP
InternetGatewayDevice:2 specifications.
It implements the UPnP Internet Gateway Device version 2
specification (IGDv2) and allows UPnP aware clients, such as
MSN Messenger, Azureus or Miranda to work properly from behind
a NAT firewall.
Please edit /etc/upnpd.conf before using upnpd!
https://github.com/ffontaine/igd2-for-linux
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- rewrap Config.in help text
- fix license, it's BSD-2c, not just "BSD"
- add dependency on host-pkgconf]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If those flags are not explicitly passed, the sdl2_ttf configure script
will include -I/usr/include and -L/usr/lib in the compile flags, which
are obviously unsafe for cross-compilation.
"checking for X... libraries /usr/lib, headers /usr/include"
Fixes:
http://autobuild.buildroot.net/results/f968fb31e9882cc856296a7c729d93e345e9e861
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- don't pass an argument to --with-x
- use --without-x instead of --with-x=no]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switching to the rtl8821au fork at github.com/abperiasamy/rtl8812AU_8821AU_linux.
- The current fork we are using is maintained by 1 person.
- The current fork does not work, and there are no plans to fix this:
- https://github.com/ulli-kroll/rtl8821au/issues/5
- https://github.com/ulli-kroll/rtl8821au/issues/6
- In practice, the current fork has numerous instability issues.
- Our lab switched to the abperiasamy fork a couple months ago and have been very happy with it.
- The contributor list for the abperiasamy fork contains 21 well-known individuals in the community.
- The raspberry pi community recommends the abperiasamy fork and uses it extensively.
- Firmware blobs are not necessary with the new fork.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
And drop upstream patch.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If asciidoc and xmlto are around it will automatically enable the
documentation build which is pointless.
Build time on i5-3330 with docs = 37s, without docs 25s.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tunctl is a tool for controlling the TUN/TAP driver in Linux.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
[Thomas: use $(TARGET_CONFIGURE_OPTS).]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
pcmanfm can now use gtk3+ so use that over gtk2+ if it's available.
Since it's only x11-safe for the moment the comment and deps other than
gtk stay the same.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
pcmanfm can now use gtk3+ so use that over gtk2+ if it's available.
Since it's only x11-safe for the moment the comment and deps other than
gtk stay the same.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
[Thomas:
- remove check for the ser2net binary
- add check for the configuration file
- use 'printf' instead of 'echo -n'
- fix indentation where needed]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
systemd it one of the "highly recommended" dependecies according to the
README [1] but disabling it doesn't need the
--enable-i-really-know-what-i-am-doing... option.
That's why BR2_PACKAGE_EFL_HAS_RECOMMENDED_CONFIG is not disabled when
systemd is not selected.
[1] https://git.enlightenment.org/core/efl.git/tree/README?h=efl-1.17#n489
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
And drop upstream patch.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
And drop upstream patch.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
And switch to github homepage.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
elementary_codgen tool is build for the host, so use it while building
elementary for the target.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
"This will be the last release in the e20 series"
https://www.enlightenment.org/news/e-0.20.10-release
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
According to https://matt.ucc.asn.au/dropbear/CHANGES there were some
severe security issues fixed.
Signed-off-by: Alexander Dahl <post@lespocky.de>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the gamin package, patch
0003-fix-missing-PTHREAD_MUTEX_RECURSIVE_NP.patch was introduced to fix
the build with musl. Indeed, while musl defines "linux", it does not
define PTHREAD_MUTEX_RECURSIVE_NP, but only PTHREAD_MUTEX_RECURSIVE. So
the check was simplified to only verify if PTHREAD_MUTEX_RECURSIVE_NP is
defined.
However, this doesn't work well with uClibc linuxthreads. In uClibc,
PTHREAD_MUTEX_RECURSIVE_NP and PTHREAD_MUTEX_RECURSIVE are not
pre-processor defines, but enum values. For this reason, even if
PTHREAD_MUTEX_RECURSIVE_NP actually exists, #if
defined(PTHREAD_MUTEX_RECURSIVE_NP) is false. So, the gamin code falls
back to using PTHREAD_MUTEX_RECURSIVE.
Except that for uClibc linuxthreads, PTHREAD_MUTEX_RECURSIVE is defined
only if __USE_UNIX98 is defined. For the NPTL implementation,
PTHREAD_MUTEX_RECURSIVE is defined either if __USE_UNIX98 or
__USE_XOPEN2K8 are defined. This strange difference has been reported to
uClibc-ng upstream [1].
However, regardless of this uClibc behavior, using #if defined to check
for the availability of PTHREAD_MUTEX_RECURSIVE_NP is not good. This
commit therefore switches to using a proper AC_CHECK_DECL() autoconf
test, which works regardless of whether the value is #define'd or
defined as an enum value.
This fixes the build of gamin on linuxthreads platforms, such as
Microblaze or m68k.
Fixes:
http://autobuild.buildroot.net/results/887df97196d7777efbf18a7bee91aa45c1a98700/ (Microblaze)
http://autobuild.buildroot.net/results/eb4389474e1b30b5c395a07a857da13a66763bdb/ (m68k)
[1] http://mailman.uclibc-ng.org/pipermail/devel/2016-July/001087.html
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When efl package is build with Eolian support, eolian_cxx tool is
build for the host.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The efl package has zlib in its dependencies, but does not select it,
which causes a dependency check error with the following defconfig:
BR2_arm=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
BR2_TOOLCHAIN_EXTERNAL_URL="http://autobuild.buildroot.org/toolchains/tarballs/br-arm-full-2016.05-1162-g94c7298.tar.bz2"
BR2_TOOLCHAIN_EXTERNAL_GCC_4_8=y
BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_10=y
BR2_TOOLCHAIN_EXTERNAL_LOCALE=y
BR2_TOOLCHAIN_EXTERNAL_INET_RPC=y
BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_INIT_NONE=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_SYSTEM_BIN_SH_NONE=y
BR2_PACKAGE_EFL=y
This commit fixes this by selecting the zlib package at the Config.in
level.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Eolian languages bindings needs C++11, so we needs at least a gcc 4.8
for the host and target variant.
The C++11 support with gcc 4.7 is not sufficient.
Build eolian_cxx for the host only if Eolian support for the target is
selected.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: fix misc typos.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
AllJoyn Base Services are common services used by many devices,
providing a set of interfaces for different devices to interact and
interoperate with one another.
Thin Client Library is designed to bring the benefits of the AllJoyn
distributed programming environment to embedded systems.
https://allseenalliance.org
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The AllJoyn framework defines a common way for devices and apps to
communicate with one another regardless of brands, categories,
transports, and OSes. Developers write applications that discover
nearby devices, and communicate with each other directly and through
the cloud, unleashing new possibilities in the Internet of Things.
AllJoyn Thin Core Library (AJTCL) is designed to bring the benefits
of the AllJoyn distributed programming environment to embedded
systems.
https://allseenalliance.org
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
AllJoyn Base Services are common services used by many devices,
providing a set of interfaces for different devices to interact and
interoperate with one another.
https://allseenalliance.org
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- Add dependency on BR2_TOOLCHAIN_HAS_SYNC_4, inherited from the
alljoyn package.
- select BR2_PACKAGE_ALLJOYN_BASE_CONTROLPANEL when neither
BR2_PACKAGE_ALLJOYN_BASE_NOTIFICATION nor
BR2_PACKAGE_ALLJOYN_BASE_ONBOARDING are selected. This ensures that
the package will at least build and install one thing.
- rename the Config.in option prompts from "alljoyn-<foo>" to just
"<foo>"
- rework the build command to use a loop rather than duplicate code
- rework the install command to also use a loop, and to not discard
errors.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
http://autobuild.buildroot.net/results/64b1bde02346ca67b670f0b095bd3acad707e8cd
Signed-off-by: Bimal Jacob <bimal.jacob@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: use depends on rather than select.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We expect the custom skeleton to be fully filled with the necessary
files, now. There is definitely no reason we should handle setting the
hostname and the issue file in there. A user using a custom skeleton
should be fully responsible for providing a functional skeleton.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We expect the custom skeleton to be fully filled with the necessary
files, now. There is definitely no reason we should handle network
settings in there. A user using a custom skeleton should be fully
responsible for providing a functional skeleton.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Being custom means that our default one is not suitable to start with.
So there is no reason to offer it as the default path.
Add a check that it is not empty.
Add a separating empty line, for good measure, too.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is a bit special. When Busybox is
enabled, it is a Busybox option. When Busybox is not enabled, it is a
stand-alone option, forcibly enabled.
So we can safely 'select' it without ensuring (via a 'depends on' or
another 'select') that Busybox is enabled.
However, the name of this option does not express the fact that it is
safe to select it without checking Busybox, which can lead to a bit of
time-consuming head-scratching.
To avoid future puzzlement from an unsuspecting observer, add a a big
fat comment that this option can be selected without any dependency on
Busybox.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas: slightly improve the wording of one of the comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
fcgiwrap was not updated since April 2015, but the last GitHub release
is from February 2013. Therefore, bump fcgiwrap to the latest commit
as it features fixes and improvements, but is unlikely to be part of a
release soon.
Update as well:
* the license file (latest commit features a COPYING file),
* the Config.in URL, as the previous "official" URL now returns an
HTTP 502 error.
Signed-off-by: Thomas Claveirole <thomas.claveirole@green-communications.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The removal of the unconditional compilation and linking of some .o files were
missed when porting the patch 0003 to the version 2016.07, leading to errors
like these when FIT support is enabled:
tools/fit_common.o: In function `fit_verify_header':
fit_common.c:(.text+0x0): multiple definition of `fit_verify_header'
tools/fit_common.o:fit_common.c:(.text+0x0): first defined here
tools/fit_common.o: In function `fit_check_image_types':
fit_common.c:(.text+0x10): multiple definition of `fit_check_image_types'
When FIT support is disabled, the build does not fail but it includes FIT
support.
Fix the patch 0003 to be equivalent to the original one.
Fixes:
http://autobuild.buildroot.net/results/7494a5b22e3df1c05cdcc47670deaf54d9e04133http://autobuild.buildroot.net/results/f98f30bbf9d4cdde37a96b9310873d83dd649c54
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
CC: Fabio Estevam <festevam@gmail.com>
CC: Carlos Santos <casantos@datacom.ind.br>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Remove patch
0001-Add-configure-option-to-disable-documentation.patch as this is
now include in the new version.
- Add dependency on gettext when needed, since it uses libintl if
gettext functionality is not provided by the C library.
- Keep autoreconf/gettextize, which are needed for the link against
libintl to work properly.
Signed-off-by: Roland Franke <fli4l@franke-prem.de>
[Thomas:
- add dependency on gettext when needed
- add comment about why autoreconf/gettextize are kept
- cleanup commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes following autobuild failure:
http://autobuild.buildroot.net/results/162db0d62075a16c7abae1229676e2cdb29fe953/
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas: as noticed yb Romain, propagate the new dependency to the
Config.in comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some of the serial port highest speed are not defined on
sparc/sparc64, so alljoyn should not use them. This commit adds a
patch to fix that.
Inspired by commit c5e96d8935.
Fixes:
http://autobuild.buildroot.net/results/e5b30b5e0d86b44b97410d434b771e1fb7b18de0
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In a Buildroot configuration with mysql enabled it might be useful to
be able to build Kodi without mysql support because Kodi may not need
it at runtime.
Kodi can store its internal databases not only locally using sqlite
but also on a mysql server, this allows several local Kodi machines to
share the same databases. When using only one Kodi instance, mysql
support is not needed, and not building mysql support helps reducing
build time.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: drop select of libX11 and libXext, since the libvdpau package
already selects them.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Most of the times this is not needed because libdrm & mesa3d already
pull in the dependency to udev. Let's add it anyway to make sure that
udev is really used and to document that Kodi makes use of udev.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use one package per line to ease review of Kodi 17 version bump, where
10+ packages will be removed. This patch contains no code changes.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch can be removed when Kodi 17.0-Krypton is released because
cximage was removed in the git master branch.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ti-gfx package supports a set of SGX implementations which are
used in some TI SoCs, newer parts are not supported by this package.
This patch adds a list of supported TI SoCs to the help text.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
[Thomas: update with the new name of packages: ti-sgx-{km,um}.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
refpolicy requires host-libsemanage. host-libsemanage will fail to
compile without host-audit. This commit adds host-audit as a
requirement for host-libsemanage.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
host-libsemanage requires host-audit to compile, therefore this patch
adds a host variant for the audit package.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[Thomas: remove libcap-ng usage for now, rework commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For the same reason as for ipsec-tools [1], disable pppd for musl
toolchains.
It also include <sys/cdefs.h> which is not provided by musl [2].
This fixes a compilation error with musl libc because of undeclared
__P and missing sys/cdefs.h include.
Propagate the dependency to network-manager and rp-pppoe
packages.
[1] 33499484e4
[2] http://wiki.musl-libc.org/wiki/FAQ#Q:_I.27m_trying_to_compile_something_against_musl_and_I_get_error_messages_about_sys.2Fcdefs.h
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: add Config.in comment in network-manager.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The continuation line was fogotten. However, it fits on a single line.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As part of the v0.9 release, development moved from sourceforge to
GitHub.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After applying a patch like [1], the build failed with the following
error:
liballjoyn_c.a(Message.o): In function `alljoyn_message_destroy':
Message.cc:(.text+0x74): undefined reference to `__sync_sub_and_fetch_4'
liballjoyn.so: undefined reference to `__sync_bool_compare_and_swap_4'
liballjoyn.so: undefined reference to `__sync_add_and_fetch_4'
So, add dependency on BR2_TOOLCHAIN_HAS_SYNC_4 which also disable the
alljoyn build on sparc.
[1] https://git.buildroot.org/buildroot/commit/?id=c5e96d8935016456bea342db170ae6a139a8470f
Fixes:
http://autobuild.buildroot.net/results/cea/cea62a7ed7f1eda6f817d8e27fd645942def25ec
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it will install $(TARGET_DIR)/etc/rc.d/init.d/messagebus when
building on a redhat/fedora host.
Regardless of that we provide our own initscript.
Signed-off-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package adds the userspace libraries for the SGX graphics
accelerator of the following Texas Instruments SoCs: AM335x, AM437x,
AM4430, AM5430 It also adds a config file for the libraries and a
System-V init script.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
[Thomas:
- Add Config.in comment about the ti-sgx-km dependency.
- Add dependency on glibc since the package consists of pre-built
libraries that can only work with glibc.
- Add Config.in comment about thread and glibc dependencies
- Use tabs for indentation everywhere.
- Use git:// instead of http:// to clone, since http:// doesn't work.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package adds the kernel module for the SGX graphics accelerator of the
following Texas Instuments SoCs: AM335x, AM437x, AM4430, AM5430
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
[Thomas:
- Add Config.in comment about Linux kernel dependency
- Extend Config.in help text to indicate that a TI specific kernel is
needed
- Fetch using git:// since fetching from http://, since fetching over
http:// doesn't work.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
rt-tests doesn't build with some "old" toolchains due to missing local
syscall number definition for the new kernel deadline scheduler on some
architectures. Upsteam added __NR_sched_setattr and __NR_sched_setattr
definition only for common architectures (x86, x86_64, arm) and tile if
not already defined [1].
Instead of adding missing syscall number, avoid building rt-tests
with toolchain compiled with too old kernel headers (i.e
!BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_14)
At runtime, a 3.14 kernel must be used otherwise these syscall are not
available.
[1]
ef2dee4232
Fixes:
http://autobuild.buildroot.net/results/6fa/6facaeb10588bdf3ff029b882a8ae6ffba815cdc
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Dagg Stompler <daggs@gmx.com>
[Thomas:
- use the AML_LIBS_STAGING_DIR variable instead of PREFIX/M_PREFIX to
indicate the compiler sysroot, which allows to use a foreach loop
in the build commands.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The X11 package builds the "mcookie" executable, when selected, into
the directory output/host/usr/bin/mcookie. The xapp_init's "configure"
attempts to find the "mcookie" executable using the host's path. If
the host has an installed "mcookie" application in their /bin folder,
it can influence the build. The following patch forces the expected
mcookie location.
Related:
http://thread.gmane.org/gmane.comp.lib.uclibc.buildroot/50310
Signed-off-by: Yugendra Sai Babu Nadupuru <yugendra.sai.babu.nadupuru@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas:
- remove conditional on the mcookie package being enabled, since
xapp_xinit depends on the X.org server, and the X.org server
selects mcookie.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add hash for amd-gpu-bin-mx51-11.09.01.bin (the framebuffer variant of
the driver).
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The mtd tests have proven very useful in testing both flash stability
and JFFS2 changes. Adding an option to install the integrity test.
Signed-off-by: Yugendra Sai Babu Nadupuru <yugendra.sai.babu.nadupuru@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas: rename Config.in option, misc improvements in .mk file, add
patch to fix build with uClibc/musl.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Naxsi is a third party nginx module reads a small subset of simple rules
containing a list of known patterns involved in website vulnerabilities.
This module behaves like a DROP-by-default firewall for nginx.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
[Thomas:
- include Config.in file directly from package/Config.in and not from
package/nginx/Config.
- improve Config.in help text with more details
- rename the package prompt from ngx_http_naxsi_module to nginx-naxsi
- remove NGINX_NAXSI_SOURCE, and fix the definition of
NGINX_NAXSI_SITE
- change license from GPLv3 to GPLv2+ with OpenSSL exception
- cange license file from LICENSE to naxsi_src/naxsi_json.c. The
LICENSE file exists in the latest Git master of the project, but
not in the 0.54 tag that we're packaging.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A module for nginx web server for handling file uploads using
multipart/form-data encoding (RFC 1867).
Signed-off-by: Bimal Jacob <bimal.jacob@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas:
- rename from nginx-upload-module to nginx-upload. Indeed, we don't
want all nginx modules to be suffixed with "-module"
- include the module Config.in file directly from package/Config.in,
like we do for Python, Perl, Lua or TCL modules.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Removed 0001-lib-gen_tables.c-define-EHWPOISON-when-not-available.patch
as this was applied upstream.
- Removed 0002-Fix-usage-of-audit_status.feature_bitmap.patch as this was
applied upstream.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libgudev indeed used to be provided directly by eudev, but it's no
longer the case since eudev 3.1.3, and this has been already taken
into account in Buildroot in commit
6cfa5de33e. We simply forgot to update
the comment.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libgudev is now provided by the the eponym package libgudev.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
--enable-libkmod does not exist, but there's --enable-kmod.
Also, add --enable-blkid to the list of options, since we already depend
on it (from util-linux).
Also do not align \ for line continuations.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Due to a recent update in the code, CONFIG_RTL8821AU=m is the expected
kernel configuration environment variable to be set, not
CONFIG_RTL8812AU_8821AU=m as was previously set.
Presently the package does effectively nothing.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the support for JP2K is requested, the configure script is looking
for libopenjpeg1.pc which is not provided by the openjpeg package since
it's too recent (currently v2.1).
Mark BR2_PACKAGE_EFL_JP2K as broken until a new version of the efl
stack support the new openjpeg library.
Fixes:
http://autobuild.buildroot.net/results/ff1/ff1dbbc6cffdb5b2550b3613295151ff9fa964d6
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When atomic intrisics are missing, libfastjson falls back to using
pthread mutexes to manage atomicity. Of course, this is much less
efficient than atomics, but it does the job.
Propagate the new dependency to rsyslog, the sole user of libfastjson.
Note: rsyslog already depends on threads for itself, but we believe it
is better to have the exact same dependency propagated.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libfastjson is supposed to use the __sync_*4 atomic intrinsics, but alas
it is not using them because their ./configure decides they are not
available: it uses AC_TRY_RUN to check for them, and the default is to
decide they are not available, because of cross-compilation.
Besides, one of the source files was not including the generated
config.h, so even after fixing ./configure there was still a build
error.
The first patch is a backport from upstream to fix the missing
inclusion.
The second patch is switching AC_TRY_RUN over to AC_LINK_IFELSE, as the
only thing we're interested in is to check for the presence of the
atomic intrisics, and linking is enough for that.
Fixes:
http://autobuild.buildroot.org/results/192/1923d0b570adba494f83747a9610ea6ec35f5223/http://autobuild.buildroot.org/results/23a/23ac0e742ed3a70ae4d038f8c9eadc23e708f671/
and many others...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Thompson <peter.macleod.thompson@gmail.com>
[Thomas:
- point <pkg>_LICENSE_FILES to a file that actually exists
- add host-pkgconf to the dependencies
- remove unneeded CONF_OPTS options
- pass FREETYPE_CONFIG in the environment to point to freetype-config]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Thompson <peter.macleod.thompson@gmail.com>
[Thomas:
- remove all sub-options to select the various image formats. Between
no formats enabled and all formats enabled, the size difference of
the library is ~30 KB, so it really isn't worth having all those
sub-options:
-rwxr-xr-x 1 thomas thomas 22444 juil. 15 15:51 libSDL2_image-2.0.so.0.0.1
-rwxr-xr-x 1 thomas thomas 59216 juil. 15 15:52 libSDL2_image-2.0.so.0.0.1
consequently, we simply enable unconditionally all image formats
that don't have any dependency, and use "automatic" dependencies
for the 4 formats that require an external library
- remove the host package variant, as it isn't used anywhere.
- remove --with-sdl2-prefix and --with-sdl2-exec-prefix, and instead
add a dependency on host-pkgconf so that pkg-config is used
- remove --disable-static, this is handled by the autotools-package
infrastructure already
- point <pkg>_LICENSE_FILES to an existing file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Thompson <peter.macleod.thompson@gmail.com>
[Thomas:
- Rewrap Config.in help text.
- Remove unused SDL2_GFX_VERSION_MAJOR variable
- Add host-pkgconf to the dependencies, since pkg-config is used to
find sdl2. This fixes the build, otherwise -I/usr/include/sdl2 was
added to the CFLAGS when sdl2-config was found on the host machine.
- Remove --with-sdl2-prefix, since this option doesn't exist, and
using pkg-config is a better solution (--with-sdl-prefix exists,
but is not useful when pkg-config is available).
- Remove --enable-static, packages are not supposed to pass such an
option, it's not automatically by the autotools package
infrastructure.
- Pass --disable-sdltest instead of --disable-sdl2test since the
latter doesn't exist, while the former does.
- Pass SDL2_GFX_AUTORECONF = YES since the configure/Makefile.in are
not up-to-date and therefore it tries to use aclocal at build time.
- Adjust _LICENSE_FILES, since there is no file named 'LICENSE', use
the smallest source file instead, since it contains the license
text.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This adds an entry in the configuration menu in order to enable or
disable the accessibility support.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some old binary blobs drivers only implement an old VIDEODRV ABI. This
is the case for the AMD Catalyst driver for example.
Such a situation already exists with the nvidia-tegra23, that only
support the VIDEODRV ABI 14.
Since VIDEODRV ABIs are not backward compatible [0], lets introduce an
older Xserver version that supports such an old ABI.
0. https://www.x.org/wiki/XorgModuleABIVersions/
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The cyclictest program doesn't build with musl toolchains due to
several issues with a different implementation of the "struct sigevent"
from Glibc/uClibc and musl (similar to [1]).
The pi_stress program doesn't build with musl toolchains with the
following error since musl doesn't provide _POSIX_THREAD_PRIO_INHERIT
define even if musl have Priority Inheritance mutexes [2]:
src/pi_tests/pi_stress.c:78:2: error: #error "Can't run this test without PI Mutex support"
#error "Can't run this test without PI Mutex support"
Since the fix for cyclictest is not trivial, disable rt-tests for musl
toolchains.
Fixes:
http://autobuild.buildroot.net/results/c27/c272ef7df6190cbb688e6db0b1ee210e6fbb472c
[1] https://bugs.mysql.com/bug.php?id=80322
[2] http://www.openwall.com/lists/musl/2016/03/18/6
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Rebase patch 01 and 02 on v1.0
Remove upstream patches 03 and 04.
Switch to release tarball (.xz) and use BR2_KERNEL_MIRROR
Remove HASPYTHON since it has been removed from patch 01 and clear
PYLIB if PYTHON package is not selected.
Remove NPTL handling since the patch upstreamed by Alexey Brodkin
has been reverted [1]
Add hash file
[1] https://git.kernel.org/cgit/utils/rt-tests/rt-tests.git/commit/?id=6f3c1ba9e8403cff6ca12351c43bde68e0fbca25
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
rt-tests is not maintained from Clark Williams's repository anymore.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tests are not usefull on an embedded device.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Include proper config.h (via log4cpp/Portability.hh) to fix the
evaluate of LOG4CPP_HAVE_STDINT_H in the file tests/Clock.hh
Fixes [1]:
Clock.hh:17:13: error: 'int64_t' does not name a type
typedef int64_t usec_t;
[1] http://autobuild.buildroot.net/results/186/1867632f30531da69f06b965bc833817400f618f
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order for gpsd to work with the new version of ntpd, an enable
option must be added to the configure step of ntp that allows for
support of SHM clocks to be attached through shared memory.
Signed-off-by: Yugendra Sai Babu Nadupuru <yugendra.sai.babu.nadupuru@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the systemd service, the binary is located at /usr/sbin not
/usr/bin.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* Remove fetching upstream patch to fix build without MTD support
* Update .config
* Update help text as SSL support is now needed for other features
than the webserver too
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit b6ff742ca0.
This bump causes numerous build failures, so Vicente and Yann proposed
to revert it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
GCC 4.9.3 for sparc64 defines __sparc_v9__, not __sparc64__ nor
__sparcv9 (as reported by `gcc -dM -E - < /dev/null | egrep 'sparc|arch'`).
This prevents LG_QUANTUM from being properly defined. Adding this new
value solves the issue.
Fixes:
http://autobuild.buildroot.net/results/95d/95df560b13be7abbce6aeeb3ed0f0814d597bd08/
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to savannah download site since sourceforge is acting funny.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
GNUTLS-SA-2016-2 - vulnerability that affects certificate verification
when GnuTLS is used in combination with the p11-kit trust module.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As described at:
4520524ba0
this commit continues a series of updates of ARC tools.
This engineering build fixes the kernel dwarf stack unwinder feature for
ARC targets.
We still keep GDB as it is of arc-2016.03 release because there're some
issues we'd like to resolve before releasing it to wider audience.
So again note this is next engineering builds of arc-2016.09 series
and it might have all kinds of breakages, please don't use it for
production builds.
Related to:
4520524ba0
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
syslog-ng is built with the default buildroot flag localstatdir=/var
This causes three issues:
1) syslog-ng creates two files (syslog-ng.ctl and syslog-ng.persist in /var)
which shouldn't have random files generated in it.
2) SELinux expects it in it's default directory /var/run.
3) This breakes read only file systems because /var/ usually isn't mounted as
a seperate filing system.
Setting the buildflag to the default /var/run
fixes all three of thee of these issues.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- drop 0001-native-affinity.patch as it was replaced upstream [1]. Autoreconf
could be dropped
- drop conf env ac_cv_file__proc_stat=yes ac_cv_file__proc_meminfo=yes because
these tests no longer run when cross-compiling [2]
- upstream created a custom check function to use ncurses*-config [3] but it
does not allow to override the path to ncurses*-config, leading to a build
failure as the htop build system would search the path of host tools.
A new patch 0001-Allow-to-override-ncurses-config-path.patch allows this
override [4]. It brings back the need to autoreconf
- set path to ncurses5-config in conf env in order to avoid the htop build
system finding it in the path of host tools
[1] dfad0afb36
[2] b561956637
[3] 96c929f82b
[4] 666f12f60f
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The prompt of all host packages is "host foo", except for imx-usb-loader
that uses "host-foo", and more precisely "host-imx-usb loader", which is
really weird. This commit fixes this inconsistency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com>
[Thomas:
- Rename prompt from "host-mxsldr" to "host mxsldr".
- Add BR2_armeb in the list of architectures under which this package
can be enabled.
- Remove double quotes around the _SITE value.
- The license is GPLv2+, not GPLv2.
- Add a value for the _LICENSE_FILES variable
- Rename MXSLDR_DEPENDENCIES to HOST_MXSLDR_DEPENDENCIES, since the
dependencies of the host package are no longer derived from the
dependencies of the target package.
- Remove the MXSLDR_MAKE_OPTS variable that contained the PKG_CONFIG
variable definition: it is already passed in HOST_CONFIGURE_OPTS.
- Remove hash file, as it is not checked on Git packages for now.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When BR2_PACKAGE_LIBSECCOMP is set, go will try to find libseccomp
library using pkg-config. But pkg-config is not in the PATH when go
is called during the runc build.
Set the correct PATH in RUNC_MAKE_ENV.
Fixes:
http://autobuild.buildroot.net/results/fea/fea069fec671b32bffd3d133898d71d45abab552
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch bumps mono version to the latest released version 4.4.1.0.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We include a file containing cached values for Fortran tests that are
performed at the configure step. These tests fail when cross-compiling
and this is known upstream. See:
https://www.open-mpi.org/community/lists/users/2013/01/21186.php
In that thread the upstream maintainer admits that "cross compiling
OpenMPI is a known issue" and the way to workaround this is to
"pre-populate configure's answers to the Fortran tests (so that it
doesn't actually have to run anything)"
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
[Thomas: use a config cache.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We include a file containing cached values for Fortran tests that are
performed at the configure step. These tests fail when cross-compiling
and this is known upstream. See:
https://www.open-mpi.org/community/lists/users/2013/01/21186.php
In that thread the upstream maintainer admits that "cross compiling
OpenMPI is a known issue" and the way to workaround this is to
"pre-populate configure's answers to the Fortran tests (so that it
doesn't actually have to run anything)"
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
[Thomas: use the config cache mechanism to preseed the cache variables.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For convenience it's nice to have default hostapd.conf installed
on target automatically as a good starting point.
Otherwise user has to create it manually from scratch.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>i
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This hook is not required anymore since we handle WebRTC dependency
with --enable/disable-webrtc-aec.
Also the hook doesn't have any effect since we use autoreconf because
it should have been a POST_CONFIGURE_HOOKS.
So, we can remove it safely.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The AllJoyn framework defines a common way for devices and apps to
communicate with one another regardless of brands, categories,
transports, and OSes. Developers write applications that discover
nearby devices, and communicate with each other directly and through
the cloud, unleashing new possibilities in the Internet of Things.
https://allseenalliance.org
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- rewrap Config.in help text
- remove / at the beginning of the ALLJOYN_DISTDIR variable.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
lapack is a fortran-based linear algebra math library.
Signed-off-by: Benjamin Kamath <bkamath@spaceflight.com>
[Samuel:
- Update to use BR2_TOOLCHAIN_HAS_FORTRAN symbol + add comment
when the toolchain does not meet the requirements.
- Update powerpc/uclibc dependencies to allow build with musl.
- Bump to 3.6.1.]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[Thomas: move comment about installed libraries from .mk file to
Config.in help text.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
jemalloc has a hard-coded list of supported architectures, which it uses
to define the minimum alignment for allocations. It whines at build time
(not at configure time) when it does not know that alignment.
Fix that by making jemalloc depend on the known-supported architectures.
Fixes:
http://autobuild.buildroot.org/results/674/674b6022f9a403528a758c0785656d2bda79e0a9/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- split ARM and AArch64 dependencies on two lines
- for SuperH, instead of using BR2_sh && !BR2_sh2, explicitly list the
SH4 variants, since only SH4 is supported by jemalloc.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch changes PYTHON_PILLOW_INSTALL_TARGET_CMDS to actually
install pillow in target directory instead of host.
While at it, it also fixes the version for the hash, and uses the more
conventional "define ... endef" construct to define variables in
python-pillow.mk.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Thomas:
- fix the license information, it's GPLv3+, LGPLv3+.
- add a comment about the COPYING file containing only the LGPLv3 text,
even though there is some GPLv3+ code.
- minor tweaks in the .mk file
- rewrap Config.in help text.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ARM assembly code in opus uses full ARM instructions, which won't
work on Thumb-2 only platforms such as ARMv7-M, so we disable the
assembly code in such situations.
Fixes:
http://autobuild.buildroot.net/results/ffa12ab7abadd76901228fc82da24e81bb6da625/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There was a typo in commit
b05ff12b6c ("uboot: install multiple spl
images"), leading to a missing closing parenthesis. This commit fixes
this typo.
Fixes bug #9086
Reported-by: Jebodiah Sensai <dkaplan65@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
tekui selects a bunch of Lua modules, which are only available when
!BR2_STATIC_LIBS, so add this missing dependency.
Fixes:
http://autobuild.buildroot.net/results/0c8ae60a7c0dfb64ee12d557b1660a4a1fc84703/
While we're at it, use the lower-case name of the package in the
Config.in comment.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Starting with gdb 7.10, gdb wants to re-generate its documentation.
We were trying to avoid that by patching the Makefiles, but it wasn't
working in all situations. So, we simply add a dependency on
host-texinfo in all case.
Fixes:
http://autobuild.buildroot.net/results/f72/f72eac3e2f995e93f0e8f215e68ce4356a696dcb
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Shell In A Box implements a web server that can export arbitrary command
line tools to a web based terminal emulator. This emulator is accessible
to any JavaScript and CSS enabled web browser and does not require any
additional browser plugins.
Signed-off-by: Olivier Singla <olivier.singla@gmail.com>
[Thomas:
- Use "select" instead of "depends on" for the OpenSSL dependency, and
use alphabetic ordering.
- Rewrap Config.in help text.
- Use github macro
- Explain why the OpenSSL dependency is mandatory, while
--enable-ssl/--disable-ssl are available.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes a build error, when uclibc utils is selected targeting Blackfin.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds python pillow, the friendly python image library fork,
it includes a backported patch to disable configuration platfom
guessing.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
[Thomas:
- Rewrap Config.in help text.
- As suggested by Bernd Kuhls, bump the version to 3.3.0 and drop the
patch that has been applied upstream.
- Rework the optional dependency handling to follow what we do in most
Buildroot packages.
- Add licensing information.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
[Thomas:
- Add dependency on BR2_USE_MMU
- Rewrap Config.in help text
- PID file goes in /var/run/
- Daemon to start is /usr/sbin/sockd, not /usr/sbin/dante
- Remove staging installation, as it is not needed
- Remove --enable-debug, since that's not what BR2_ENABLE_DEBUG is
meant for
- Install an example configuration file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: minor tweaks to Config.in.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The two previous patches have been merged upstream, so they have been
deleted here. Another patch (picked from upstream) has been added to fix
the build with thread-less toolchains.
Libiio v0.7 provides two new backends, a USB backend (using libusb-1.0)
and a serial backend (using libserialport).
Additionally, it is now possible to compile libiio with thread-less
toolchains. In that case, thread safety is disabled.
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Register package-specific target-finalize hooks with the
newly-introduced <PKG>_TARGET_FINALIZE_HOOKS.
This incidentally fixes luarocks, which was registering target-finalize
hooks even when it was not enabled.
To be noted, the skeleton package is not converted, because it is not
optional, we always have it; so its hooks would always be registered
anyway. Besides, the followup patches would render this conversion moot
anyway, since those hooks would be spread across the various skeleton
packages.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, packages using target finalize hooks must remember that they
need to register their hook in TARGET_FINALIZE_HOOKS
conditionally (otherwise their hook will be triggered even if the
package is disabled).
In order to avoid this potential mistake, this commit introduces a
per-package target-finalize hook variable, in which packages can
register their target-finalize hooks, with the guarantee that they will
only be triggered if the package is enabled.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas: rework commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The hostname does not look like it serves any useful purpose, except
maybe to set set perladmin email.
Which is undoubtfully useless on the target.
A followup commit will make the hostname depend on the default skeleton,
so it won't always be available. We can not rely on it to be set.
Besides, even today it is not guaranteed to be set; a user may well
leave it empty.
Use a dummy hostname.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Reviewed-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In makefiles, variables have global scope. We traditionally ensure that
we get no name clashing by prefixing all variables with the package
name.
Currently, this is not the case in the skeleton package, for historical
reasons (code snippets copied over from the common Makefiles). We
currently have a mix of naming for the variables:
- some are indeed prefixed with SKELETON_
- some are prefixed with SYSTEM_
- some are prefixed with both
- some are not prefixed
Clean up these discrepancies, and prefix all variables with just
SKELETON_ and drop the SYSTEM_ prefix.
Also include SET_ in all variables that do set something (getty) for
consistency across all the variables.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 2.26 binutils tarball has incorrect timestamps for the .info files,
so binutils build system tries to regenerate them with makeinfo. In
order to avoid depending on host-texinfo, we simply touch the .info
files so that their timestamp is newer than the corresponding source
files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gdb versions fetched from git (such as the ARC version) will not build
with host-flex and host-bison.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Just like binutils, when gdb is fetched from git, it wants to
re-generate its documentation. We were trying to avoid that by patching
the Makefiles, but it wasn't working in all situations.
So, we simply add a dependency on host-texinfo when gdb is fetched from
git, and remove our hackhish work-around.
Fixes:
http://autobuild.buildroot.net/results/80e63edc009d23cb939880a6f5ae2f220f07a96a/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds the dependency on host-texinfo to binutils, when the
source is fetched from Git. Thanks to this, we can remove the
0800-Docs-Prevent-build-failures-when-makeinfo-is-missing.patch patch
from the ARC-specific version of binutils.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We have tried multiple solutions to solve the "makeinfo" problem in
binutils and gdb, without finding anything really convincing. So it
seems like the easiest solution is to add a texinfo host package, and
use it as a dependency of binutils/gdb when they are fetched from
Git. This commit introduces just the host-texinfo package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gallium driver also provides DRI-like infrastructure and OpenGL.
This change prevents from removing pkg-configs of them also when
installing the driver.
Signed-off-by: Akihiko Odaki <akihiko.odaki.4i@stu.hosei.ac.jp>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This ensures the correct AR is used for some of the iptables build
process. This is the same fix as
<https://bugs.gentoo.org/show_bug.cgi?id=444282>
Signed-off-by: Jordan Yelloz <jordan@yelloz.me>
[Thomas: use upstream patch instead of passing AR in the environment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 7b17bafc5d by Davide Viti has a
detailed explanation of some unusual techniques used for building
host-cmake and (target-)cmake. This is useful information for whoever
starts hacking on it, so copy it in the makefile, where it will be
easily noticed.
Also remove the sentence about host-cmake having a runtime dependency
on host-pkgconfig (not true anymore: it's the specific cmake-packages
that depend on it) and fix typos.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Davide Viti <zinosat@tiscali.it>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
