Signed-off-by: Joao Pinto <jpinto@synopsys.com>
[Thomas:
- Rename the package from atfirmware to arm-trusted-firmware, in order
to match upstream.
- Remove option to apply custom patches. We no longer add such options,
and use the global patch directory instead.
- Rename the repo URL/version options, in order to not be Git specific,
in case support for fetching from other VCS is added later. This is
consistent with how other bootloaders handle this.
- Add license information.
- Do not add a weird dependency on the vexpress-firmware package in
Config.in. Instead, simply use it if it's available. Of course, some
configurations (such as the juno configuration) will fail to build if
vexpress-image is not enabled, but it's the responsibility of the
user to create a config that builds.
- Simplify misc aspects in the .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the SCP (System Control Processor)
firmware for the ARM reference platforms. There will most likely be
other SCP firmware provided by other vendors, but they might be provided
in a different form, so we for now create a vendor-specific package
named vexpress-firmware.
Since this firmware is used for booting, we create the package in boot/
and not in package/.
The package simply installs a single pre-built binary file into the
images directory.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
[Thomas:
- Rename the package from scpfirmware to vexpress-firmware.
- Add a Config.in prompt for the package.
- Remove the prompt-less Config.in options to select the Git repo and
version. Since we only support the Vexpress firmware, there's no need
for configurability here, so we just use the right Git repo/version
in the .mk file.
- Use $(INSTALL) -D to install the firmware file.
- Add license information.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: add hash file, as suggested by Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit fad58cefa4 ("boot/uboot: allow to build multiple U-Boot
images") the installation of SPL binary fails.
For example, when building the mx6cubox_defconfig target we see:
LD u-boot
OBJCOPY u-boot-nodtb.bin
COPY u-boot.bin
MKIMAGE u-boot.img
>>> uboot 2016.09.01 Installing to target
>>> uboot 2016.09.01 Installing to images directory
cp -dpf /home/fabio/buildroot/output/build/uboot-2016.09.01/u-boot.bin /home/fabio/buildroot/output/images/
cp -dpf /home/fabio/buildroot/output/build/uboot-2016.09.01/u-boot.img /home/fabio/buildroot/output/images/
cp -dpf /home/fabio/buildroot/output/build/uboot-2016.09.01/SPL /home/fabio/buildroot/output/images/
cp: cannot stat '/home/fabio/buildroot/output/build/uboot-2016.09.01/SPL': No such file or directory
Instead of calling 'make all' only for the BR2_TARGET_UBOOT_FORMAT_DTB_IMG
case, call 'make all' unconditionally so that the SPL target can also
be installed.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With newer ARC toolchain obsolete -marcXXX were finally deperecated
and so compiler throws errors now about unknown option.
Solution is as simple as switching to more generic -mcu-XXX
options. Which we do. Unfortunately that change in upstream U-Boot [1]
happened right after v2016.09 was released an so we need to have that fix
for v2016.07 which is mentioned in axs10x defconfigs and for the latest
U-Boot release v2016.09 (which is selected by default if no defconfig is
used).
Once we deprecate either U-Boot version in U-Boot corresponding patch
should be removed essentially.
[1] http://git.denx.de/?p=u-boot.git;a=commit;h=7c8d81605302e7d7fdd3e7d8eb69302bddc64a2c
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: handle the U-Boot bump to 2016.09.01.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016.09.01 is a bugfix release, so bump to this version.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Sometimes it is desired to build multiple U-boot images. E.g. one to
save into flash memory and one for serial load. So far this was not
possible.
This change allows to select any combination of the target formats. They
are all copied to the image folder.
Signed-off-by: Petr Kulhavy <brain@jikos.cz>
[Thomas:
- Handle the BR2_TARGET_UBOOT_FORMAT_BIN, which wasn't handled, and
therefore u-boot.bin was not copied when
BR2_TARGET_UBOOT_FORMAT_BIN=y.
- Rename UBOOT_BIN to UBOOT_BINS, since it can now contain multiple
values.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Ubuntu 16.10 has pie enable by default. This causes a build failure with
syslinux.
https://bugs.launchpad.net/ubuntu/+source/syslinux/+bug/1579023
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
[Thomas: improve patch description.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
grub2 assumes the strip command will generate output and the output should
always be stripped - so, just use the $(TARGET_CROSS)strip to make sure that
the build succeeds regardless of the buildroot strip configuration.
Signed-off-by: Charles Hardin <ckhardin@exablox.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit backports a patch from upstream grub2 that fixes a build
issue occuring at least with recent gcc versions:
gettext/gettext.c:37:36: error: storage size of 'main_context' isn't known
static struct grub_gettext_context main_context, secondary_context;
Fixes bug #8991.
Bug reproduced with:
BR2_x86_64=y
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
BR2_GCC_VERSION_6_X=y
BR2_TARGET_GRUB2=y
BR2_TARGET_GRUB2_X86_64_EFI=y
BR2_TARGET_GRUB2_BUILTIN_MODULES="boot linux ext2 fat squash4 part_msdos part_gpt normal efi_gop terminal"
and verified fixed after adding this patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This MBR routine is based on TS' original bootloader. It is loaded by
the bootrom stored in the companion FPGA, and chainloads an executable
located at the beginning of the first non-fs (0xda) partition.
Signed-off-by: Patrick Keroulas <patrick.keroulas@savoirfairelinux.com>
[Thomas:
- add hash file.
- install image in INSTALL_IMAGES_CMDS instead of
INSTALL_TARGET_CMDS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There was a typo in commit
b05ff12b6c ("uboot: install multiple spl
images"), leading to a missing closing parenthesis. This commit fixes
this typo.
Fixes bug #9086
Reported-by: Jebodiah Sensai <dkaplan65@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For some platforms, there are multiple generated spl images. Extend
BR2_TARGET_UBOOT_SPL_NAME to allow these multiple images to be installed
after uboot build completes.
For example, the NextThingCo C.H.I.P. uses two binaries from uboot,
spl/sunxi-spl.bin and spl/sunxi-spl-with-ecc.bin.
Signed-off-by: Jason Abele <jason@nextthing.co>
[Maxime:
- Add foreach loop for general case and mkpimage
- Use firstword for zynq case]
Signe-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit 0dca644e44 ("boot/uboot: fix
missing host-openssl for i.MX28 target"), we pass HOSTCFLAGS/HOSTLDFLAGS
in the environment of U-Boot when building. This is needed to allow
U-Boot to find the OpenSSL headers/libraries when they are
needed. Unfortunately, this breaks the build with old U-Boot versions as
the U-Boot Makefiles were not designed to have HOSTCFLAGS passed in,
which causes some important CFLAGS from the U-Boot build system to be
ignored.
As suggested by Arnout, we pass the HOST_CFLAGS inside HOSTCC directly,
which allows to pass the CFLAGS without overriding the internal U-Boot
CFLAGS.
Tested with an old U-Boot (2012.10), and a modern U-Boot in a
configuration that needs OpenSSL.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There is no option --enable-liblzma=no in grub2's configure script, so
the only way to disable liblzma support is to pass
ac_cv_lib_lzma_lzma_code=no.
Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: expand commit log, as suggested by Yann E. Morin.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
By default position independent executables (PIE) are generated
when building U-Boot elf target. MetaWare debugger doesn't support
PIE (position-independent executable).
In order to allow MDB load and run U-Boot elf, we need to do a
special trick, called "mdbtrick".
This special build target is used to fake generated U-Boot elf by:
1. Reset PIE flag in ELF header
2. Strip all debug information from elf
Signed-off-by: Zakharov Vlad <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: don't use the helper.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Allow multiple file names to be listed in
BR2_TARGET_UBOOT_ENVIMAGE_SOURCE, concatenating them in the order
listed.
This allows the bulk of the environment to be shared across multiple
boards using a common environment file with board-specific values
supplied in a secondary environment source file.
Signed-off-by: Cam Hutchison <camh@xdna.net>
[Thomas: adjust indentation in the .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the first level bootloader for the Actions Semiconductor S500 SoC,
which is used on boards like Roseapple Pi and LeMaker Guitar.
The bootloader performs basic configuration and chain loads u-boot for
futher setup.
This bootloader is unfortunately only available as a binary blob. It gets
configured for a specific board using a binary (32bit x86) tool based on a
.ini file (somewhat similar to sunxi .fex).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building an U-Boot image for the i.MX23 or i.MX28 target requires to run the
bootloaders 'mxsimage' tool on the host. As mxsimage needs unconditionally
OpenSSL, building U-Boot for those targets fails if it is not available on
the host:
tools/mxsimage.c:18:25: fatal error: openssl/evp.h: No such file or directory
#include <openssl/evp.h>
Add the required dependency 'host-openssl' to all the different U-Boot image
types used to build a bootloader image for an i.MX23/i.MX28 target.
Also pass HOST_CFLAGS and HOST_LDFLAGS to the U-Boot build process so the right
-I/-L options will be used to find OpenSSL.
Ported from the Armadeus project:
https://sourceforge.net/p/armadeus/mailman/message/33595402/
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
[Jörg: port to recent Buildroot version]
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Barebox provides an option to embed a custom environment image into
barebox binary. This image will be used, when the environment found in
the environment sector is invalid. Both embedded and external images
can be used together, so having both options at the same time is
justified.
This patch sets barebox Kconfig option CONFIG_DEFAULT_ENVIRONMENT_PATH
to user specified path. This way one can use such BR's variables like
BR2_EXTERNAL, TOPDIR etc. to provide paths to custom environment
folders.
Cc: Pieter Smith <pieter@boesman.nl>
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
u-boot-dtb.img only gets built by default (all target) if
CONFIG_OF_SEPARATE _AND_ CONFIG_SPL_FRAMEWORK are enabled.
Certain SoCs (E.G. Action Semi S500) use a proprietary first level
bootloader instead of u-boot SPL, but still use u-boot-dtb.img as the first
level bootloader parses the uImage header for size/loadaddr.
Ensure u-boot-dtb.img gets built if enabled by explicitly listing it as a
u-boot make target (next to all) to support such setups.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Syslinux uses the host version of gcc to build to bootloader. On systems
with gcc 5.3, this results in a bootloader that hangs. This issue has
been addressed in upstream syslinux, but an official release has not
been made yet. This commit adds the upstream patch to fix the issue.
Most likely fixes bug #8866.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adds support to build barebox with an auxiliary config.
This is useful for building an SPL (Secondary Program Loader) in
addition to the traditional TPL (Tertiary Program Loader). The
Beaglebone Black for example has two barebox configurations:
- am335x_defconfig builds the full barebox bootloader with device
tree
- am335x_mlo_defconfig builds the smaller MLO bootloader that loads
the full barebox bootloader from the eMMC or SD card.
Tested with the following defconfig:
# architecture
BR2_arm=y
BR2_cortex_a8=y
BR2_ARM_EABIHF=y
# system
BR2_TARGET_GENERIC_HOSTNAME="beaglebone"
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS=y
BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW=y
# filesystem
BR2_PACKAGE_AM33X_CM3=y
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
# bootloader
BR2_TARGET_BAREBOX=y
BR2_TARGET_BAREBOX_BOARD_DEFCONFIG="am335x"
BR2_TARGET_BAREBOX_IMAGE_FILE="images/barebox-am33xx-beaglebone.img"
BR2_TARGET_BAREBOX_CUSTOM_ENV=y
BR2_TARGET_BAREBOX_CUSTOM_ENV_PATH="board/beaglebone/barebox/barebox.env"
BR2_TARGET_BAREBOX_AUX=y
BR2_TARGET_BAREBOX_AUX_BOARD_DEFCONFIG="am335x_mlo"
BR2_TARGET_BAREBOX_AUX_IMAGE_FILE="images/barebox-am33xx-beaglebone-mlo.img"
# kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_USE_DEFCONFIG=y
BR2_LINUX_KERNEL_DEFCONFIG="omap2plus"
BR2_LINUX_KERNEL_ZIMAGE=y
# use the barebox built-in dtb
# BR2_LINUX_KERNEL_DTS_SUPPORT is not set
Signed-off-by: Pieter Smith <pieter@boesman.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
No functional changes. In preparation for the auxiliary barebox build,
boot/barebox is split into two parts:
1. boot/barebox:
- The source and patch specification which are to be shared between the
barebox and barebox-aux packages.
- The barebox-package function and build logic.
2. boot/barebox/barebox:
- The package configuration, fragments, barebox env, etc.
- The actual barebox package make instantiation.
Signed-off-by: Pieter Smith <pieter@boesman.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
No functional changes: Extracts an argument to the inner-barebox-package
function to automatically determine the uppercase package name. This is needed
to support a 2nd config build. This results in the following renaming:
'BAREBOX' -> '$(1)'
All barebox packages are meant to be built from the same sources, so related
KConfig variables (origin, version and patch directory) are not extracted.
Signed-off-by: Pieter Smith <pieter@boesman.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
No functional changes: Introduces a barebox-package function towards
re-use by a 2nd config build.
Because the function is meant to be called from within a $(eval), all
instances of '$' has to be escaped. I.e. rename '$' -> '$$'.
Signed-off-by: Pieter Smith <pieter@boesman.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Support optional selection of the built image filename in a
multi-image barebox build. This makes it possible to specify which
image to pick in a multi-image barebox config such as the
am335x_defconfig.
Signed-off-by: Pieter Smith <pieter@boesman.nl>
[Thomas:
- remove default "", since this is the default for string options
- rename the prompt from "Barebox image filename" to "Image filename"
- slightly improve the Config.in help text.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This becomes handy when building hybrid images that needs to be able
to boot in MBR and GPT mode.
Signed-off-by: Benoît Allard <benoit.allard@greenbone.net>
Tested-by: Matt Weber <matt@thewebers.ws>
Reviewed-by: Matt Weber <matt@thewebers.ws>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
By default, the afboot-stm32 Makefile uses "CROSS_COMPILE =
arm-none-eabi-". Since I had such a toolchain installed on my system
when testing afboot-stm32, I didn't realize it wasn't using the
Buildroot toolchain.
However, using the Buildroot toolchain doesn't immediately works for
FLAT toolchains, as gcc automatically wants to create a FLAT
binary. So we need to adjust the afboot-stm32 Makefile to use directly
'ld' and not 'gcc' when linking.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Size growth is minimal and generally a non-issue for x86-based
platforms.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
[Thomas: add Altera in the option name and description, drop reference
to Go being needed and to Maxime Hadjinlian's version of mkpimage
since a C version is now used.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's been deprecated for a year now so remove it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It doesn't hurt, and is useful for removable boot media like a pendrive
that may depend on usb enumeration and isn't available immediately.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It doesn't hurt, and is useful for removable boot media like a pendrive
that may depend on usb enumeration and isn't available immediately.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a _very_ small bootloader for STM32 platforms.
At submission afboot-stm32 supports the following boards:
stm32429i-eval
stm32746g-eval
stm32f429i-disco
stm32f469i-disco
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix commit title, add dependency on BR2_arm.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 16b8e813c8 removed all remaining users
of helper function insert_define.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
make legal-info breaks when using an older u-boot version in local.mk
with OVERRIDE_SRCDIR, due to the reorganization of license files which
happened in u-boot v2013.10.
This issue had already been fixed in Buildroot for the regular use of
old u-boot versions (non-local.mk).
This patch adds the same fix to UBOOT_POST_RSYNC_HOOKS so that it also
covers the local.mk case.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix improper use of qstrip; use correct variables.
Fixes#8546.
Reported-by: craigswank@gmail.com
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
[yann.morin.1998@free.fr: move the kconfig-package hunk to the
corresponding patch]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit bf2bd11321 bumped U-Boot to version
2015.10 but forgot to update the hash as well.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For a 64bit arm architecture, Buildroot uses arm64 terminology and
from the top-level Makefile KERNEL_ARCH is set to arm64 which is then
passed to the uboot build. This causes a compilation issue as uboot
uses the top-level system architecture as it's $(ARCH). So
arch/$(ARCH)/Makefile doesn't work with arm64 unless we adjust the
arch.
[Thomas:
- rewrap commit message text.
- simplify comment in the code.]
Signed-off-by: Ronak Desai <ronak.desai@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some U-Boot configurations require the Device Tree compiler to be
available, so we need to depend on host-dtc (example configuration:
zynq_zed).
However, we don't want to build it unconditionally, since the vast
majority of U-Boot configurations don't need it (and host-dtc itself
has a bunch of dependencies).
So, we simply add a Config.in option that allows users to indicate
whether their U-Boot needs DTC or not, and depend on host-dtc if this
option is enabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes https://bugs.busybox.net/show_bug.cgi?id=8256
grub2's build system interprets CC, CFLAGS and CPPFLAGS as for the host
and uses TARGET_CC etc. for the target. However, NM, OBJCOPY and STRIP
are used for the target. We currently pass the host-versions of these
tools as part of $(HOST_CONFIGURE_OPTS).
While we're at it, also pass TARGET_LDFLAGS.
This problem had not been noticed up to now because usually we build on
an x86 machine for the x86 architecture, so the binutils are compatible.
However, this is not true on an i386 when building for x86_64.
Cc: Christophe Bricout <christophebricout@yahoo.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Due to recent changes in U-Boot, see
http://git.denx.de/?p=u-boot.git;a=commit;h=a26cd04920dc069fd6e91abb785426cf6c29f45f
re-creation of .config from defconfig by "make oldconfig" happened
incorrectly.
Default prompt for target selection was set as No that lead to missing platform
selection by automated scripts like that:
------------------>8------------------
"yes "" | make oldconfig" on defconfig
------------------>8------------------
And that lead to build failure:
------------------>8------------------
$ make
scripts/kconfig/conf --silentoldconfig Kconfig
CHK include/config.h
UPD include/config.h
GEN include/autoconf.mk
In file included from ./include/common.h:18:0:
include/config.h:5:22: fatal error: configs/.h: No such file or directory
#include <configs/.h>
^
compilation terminated.
scripts/Makefile.autoconf:72: recipe for target 'include/autoconf.mk' failed
make[1]: *** [include/autoconf.mk] Error 1
------------------>8------------------
This patch reverts mentioned change making possible to build U-Boot
2015.07 in Buildroot.
Note there's a probability that this particular patch won't make its way
in upstream U-Boot and better solution will be found there. But for now
we need to fix U-Boot building in Buildroot anyways.
Hopefully for the next release this patch won't be necessary.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building Grub2 El Torito for i386 EFI errors complaining it cannot
find cdboot.img
cdboot.img: No such file or directory
This commit builds El Torito for i386 PC only.
[Thomas: fix installation ordering.]
Signed-off-by: Ray Kinsella <ray.kinsella@intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's rather unclear that uboot.sb, uboot.sd and uboot.nand are
Freescale i.MX28 specific, so let's make that clear in the prompt of
each option, like we do for the Marvell-specific uboot.kwb.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the patchset "kconfig: turnaround into single .config"
[http://lists.denx.de/pipermail/u-boot/2015-February/205490.html]
U-Boot switched to a single .config file for board configuration. This
allows us to use the kconfig-package infrastructure.
For providing backward compatibility with older U-Boot version a user
choice between the new Kconfig and the legacy build system is
introduced.
[Thomas:
- make use of the legacy build system the default, to not break
existing configurations.
- add some comments in the code checking all the configuration
options, in order to hopefully make it a bit clearer.]
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit integrates generation of a bootable image
for Xilinx Zynq. The generation is independent on Xilinx
flow and utilizes the host-zynq-boot-bin package. The only
required step is to generate a proper U-Boot SPL (instead
of the FSBL).
The SPL generation might work when providing the working
ps7_init.c file to U-Boot. However, from U-Boot 2015.07
a set of generic ps7_init.c files is included and used to
build the U-Boot SPL for various boards. The ps7_init.c file
has been released under GNU/GPL license for this purpose.
For details, see
http://lists.denx.de/pipermail/u-boot/2015-April/210664.html
The SPL searchs for u-boot-dtb.img when booting so we
enforce using of the BR2_TARGET_UBOOT_FORMAT_DTB_IMG format.
[Thomas: remove select of BR2_PACKAGE_HOST_ZYNQ_BOOT_BIN, since this
option no longer exists.]
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Allow to generate u-boot-dtb.img. This is the same format
as u-boot.img, however, it contains a built-in device-tree.
This file is being loaded by the U-Boot SPL.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If we check that the user provides a config file after we call to the
kconfig-package infra, the error message we get is the one for the
kconfig-package infra, not the custom error message we want to show to
the user.
So, only call kconfig-package after we do the check.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If we check that the user provides a config file after we call to the
kconfig-package infra, the error message we get is the one for the
kconfig-package infra, not the custom error message we want to show to
the user.
So, only call kconfig-package after we do the check.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Allow to generate 'u-boot.nand', Freescale i.MX28 BootStream format (.sb)
with a header for booting from NAND flash.
There are two possibilities when preparing an image writable to NAND flash:
1) The NAND was not written at all yet or the BCB (Boot Control Blocks) is
broken. In this case, the NAND image 'u-boot.nand' needs to written.
2) The NAND flash was already written with a good BCB. This applies after
'u-boot.nand' was correctly written. There is no need to write the BCB
again. In this case, the bootloader can be upgraded by writing 'u-boot.sb'.
To satisfy both cases 'u-boot.nand' as well as the make target 'u-boot.sb' are
copied to the binaries directory.
mxsboot for NAND images needs all three parameters typed in as integer values
(hex values do not work). The default values choosen are typical sizes for a
NAND flash.
For more information see:
http://www.denx-cs.de/doku/?q=m28evkrunuboot
Commit Note: This patch is based on top of
"[PATCH v2 1/2] boot/uboot: add support for i.MX28 SD format"
http://patchwork.ozlabs.org/patch/453116/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds the option to download at91bootstrap3 from
a custom git URL. This is a requirement for all that boards
that use a custom at91bootstrap3 version.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch bumps at91bootstrap3 version to 3.7.2
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds licensing informations to at91bootstrap3
[Thomas:
- change from "BSD-2c with endorsement clause" to "Atmel License",
because the license of AT91Bootstrap is neither a BSD-2c nor a
BSD-3c: it does not carry the second clause of the BSD-2c or BSD-3c
licenses giving the condition of redistribution of the binary form.]
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to support ISO9660 bootable images that rely on Grub 2, this
commit modifies thr Grub 2 makefile to generate and install an El
Torito image. Such an image is simply produced by concatenating the
cdboot.img provided by Grub 2, and the Grub 2 image generated by
Buildroot using grub-mkimage.
Since this action is so simple and cost-free, we don't bother adding a
Grub 2 sub-option for that, and simply generate the El Torito image
unconditionally.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
It's been deprecated since the 2014.05 release, so a year has passed.
Add legacy info as well to raise a warning when it's used.
[Peter: Remove entire config.h fixup handling]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As we recently did for U-Boot, disable checking hashes for custom
versions of barebox.
Note that we currently have no hash file for barebox, but avoiding the
check will already be in place when we do add it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For custom tarballs, it's quite obvious we can not check hashes.
For custom versions, that's not so obvious. One might think we could
have hashes for all the official releases, but that's not possible: if
the user uses a released version of Buildroot (say 2015.05) much later
in the future, and wants to use the then-released 2038.02 U-Boot. It now
seems pretty obvious that Buildroot 2015.02 can't know the hash for
U-Boot 2038.02.
So, disable checking the hash for custom tarballs and custom versions.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Vincent Stehle <vincent.stehle@laposte.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The git:// protocol may not go through conservative corporate firewalls.
Use http, that goes out through about anything.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of manually testing MAKECMDGOALS, use the newly introduced
BR_BUILDING variable to know if we're building or not.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Users should use BR2_TARGET_UBOOT_PATCH instead.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The existing u-boot patch option only allowed directories to be
specified. This adds support for URLs using similar code as found
in linux/linux.mk. Local files are also handled now.
This change is useful for Intel Edison support, so that Intel's u-boot
patch can be downloaded rather than stored in the Buildroot source tree.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix issues noticed by Arnout:
- Rewrap the linux/Config.in paragraph
- Revert the "is a toolchain dependency" -> "has a toolchain
dependency" change from pkg-generic.mk, as the original was
correct.]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For some (silly?) reason, the kconfig-package infra always wants
<pkg>_KCONFIG_FILE to be defined. So let's do like barebox does: use a
temporary AT91BOOTSTRAP3_SOURCE_CONFIG variable, and assign it to
AT91BOOTSTRAP3_KCONFIG_FILE. This way, the latter is always defined,
even if to the empty value.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In at91bootstrap3, defconfig files are spread out in various
sub-directories, so we can't easily construct the path to those
defconfig files.
As it turns out, there are no two defconfig files named the same; they
all contain at least the board name, plus some extra info. And there is
always only one directory depth below board/ where all defconfig files
are to be found.
Also, at91bootstrap3's own Makefile relies on this single-match as it
runs a 'find' command to locate the defconfig file.
So, even though we do not know the path to the defconfig file, we can
construct a shell-glob quite easily (in the hope that there will never
be more than one directory depth).
Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
[yann.morin.1998@free.fr:
- remove custom _CONFIGURE_CMDS, handled by pkg-kconfig (Thomas)
- remove redundant intermediate variable
- fix using internal defconfig files
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Several packages have some logic to apply custom patches that existed
before the BR2_GLOBAL_PATCH_DIR mechanism: at91bootstrap,
at91bootstrap3, barebox, uboot and linux. Currently, the logic of
those packages to apply custom patches is to match
<package-name>-*.patch, which is not consistent with what we've done
for patches stored in the package directory, and for patches stored in
BR2_GLOBAL_PATCH_DIR: in such cases, we simply apply *.patch.
Therefore, for consistency reasons, this commit changes these packages
to also apply *.patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Allow to generate u-boot.sd, Freescale i.MX28 SB format with a header for
booting from an SD card.
U-boot includes an mxsboot tool to generate this format, starting from
v2011.12.
See u-boot doc/README.mxs (or doc/README.mx28_common before 2013.07).
[Arnout:
- Wrap Config.in help text at 72 columns.
- Remove v from U-Boot version specifier.
- Refer to different README name before 2013.07.
- Depend on host-elftosb
- Add comment to clarify sb -> sd conversion.]
Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Tested-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop the buildroot toolchain non-largefile support option since it's
being removed.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit doesn't touch infra packages.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since 6.03 syslinux release, the gnu-efi sources are bundled whith
syslinux. We need to force the build system to use the Buildroot's
gnu-efi package.
Remove the patch for find-gnu-efi.sh script which was removed, as well
as the SYSROOT variable from the BUILD_CMDS, which is no longer
needed.
There are still some parallel build issues, so MAKE1 can't
be removed for now.
Add a hash file.
Fix indentation.
[Thomas: fix minor typos in a new comment in the .mk file.]
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Barebox uses KERNEL_ARCH to derive BAREBOX_ARCH, but doesn't
currently handle the case of the x86-64 architecture. In this
case KERNEL_ARCH is x86_64, but BAREBOX_ARCH should be x86
nonetheless.
Signed-off-by: Fabien Lahoudere <fabienlahoudere.pro@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- use $(BAREBOX_DIR) instead of $(@D) when defining
BAREBOX_SOURCE_CONFIG, because $(@D) has no value at this point
since we're outside of a make rule. This was causing Barebox to be
constantly rebuilt, since the defconfig path was not a full path,
it was looking like: '/arch/arm/configs/tegra_v7_defconfig'. The
solution of using $(BAREBOX_DIR) has been used to mimic was is done
in the linux package, which uses $(LINUX_DIR).]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: "Yann E. Morin" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Even though this is not strictly necessary with the current version
of barebox.mk, it becomes necessary when migrating barebox.mk to the
kconfig infrastructure.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: "Yann E. Morin" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When x86-64-efi platform is selected, grub2 automatically adds -m64 to the
CFLAGS. This makes the configure script failed when the toolchain does not
have multilib support (like the Buildroot ones).
Reported-by: Noe Rubinstein <nrubinstein@aldebaran-robotics.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Though U-Boot introduced a Kconfig and Kbuild build system with version
2014.10 the old build commands with <board>_config are still supported.
Tested with BR2_TARGET_UBOOT_BOARDNAME="m28evk"
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This flag seems to be obsolete. There is no piece of code in the U-Boot source
tree referencing CONFIG_NOSOFTFLOAT.
Unfortunatly the use of this flag is not documented here. Maybe it's about this
old workaround:
http://lists.denx.de/pipermail/u-boot/2007-March/020282.html
However, this patch has been declined:
http://www.denx.de/wiki/view/U-Boot/PatchStatus?rev=1.27
Since no other configure options are used, remove also UBOOT_CONFIGURE_OPTS.
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the quotes from the BR2_TARGET_UBOOT_SPL_NAME variable.
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Point out that the SPL name is an image name.
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building an SPL image depends on the board configuration. This option
does not enable the SPL build, but only copies the built SPL image to
the binary images folder. The current help text is misleading.
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Change to use the _defconfig targets of at91bootstrap3 build system
when a defconfig is used.
[Thomas: adjust to make a better use of at91bootstrap3 defconfig
mechanism.]
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This way we don't depend on the permissions of files under boot/grub/,
which aren't tracked.
While we're at it, change all 'cp' usages into 'install' with the
correct mode for each file.
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add and use the "UNZIP" variable instead of calling directly unzip
because the variable contains the "-q" option to silence "unzip" so it
doesn't show the list of files extracted just like when tar files are
being unpacked.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To easy up adding optional parameters when calling the
"apply-patches.sh" add and use the "APPLY_PATCHES" variable to execute
the script.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is the location where buildroot install the image if requested,
so this should be the default search path for the bootloader.
Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Buildroot coding style defines one space around make assignments and
does not align the assignment symbols.
This patch does a bulk fix of offending packages. The package
infrastructures (or more in general assignments to calculated variable
names, like $(2)_FOO) are not touched.
Alignment of line continuation characters (\) is kept as-is.
The sed command used to do this replacement is:
find * -name "*.mk" | xargs sed -i \
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*$#\1 \2#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\]\+\)$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\s*\([^\\ \t]\+\s*\\\)\s*$#\1 \2 \3#'
-e 's#^\([A-Z0-9a-z_]\+\)\s*\([?:+]\?=\)\(\s*\\\)#\1 \2\3#'
Brief explanation of this command:
^\([A-Z0-9a-z_]\+\) a regular variable at the beginning of the line
\([?:+]\?=\) any assignment character =, :=, ?=, +=
\([^\\]\+\) any string not containing a line continuation
\([^\\ \t]\+\s*\\\) string, optional whitespace, followed by a
line continuation character
\(\s*\\\) optional whitespace, followed by a line
continuation character
Hence, the first subexpression handles empty assignments, the second
handles regular assignments, the third handles regular assignments with
line continuation, and the fourth empty assignments with line
continuation.
This expression was tested on following test text: (initial tab not
included)
FOO = spaces before
FOO = spaces before and after
FOO = tab before
FOO = tab and spaces before
FOO = tab after
FOO = tab and spaces after
FOO = spaces and tab after
FOO = \
FOO = bar \
FOO = bar space \
FOO = \
GENIMAGE_DEPENDENCIES = host-pkgconf libconfuse
FOO += spaces before
FOO ?= spaces before and after
FOO :=
FOO =
FOO =
FOO =
FOO =
$(MAKE1) CROSS_COMPILE=$(TARGET_CROSS) -C
AT91BOOTSTRAP3_DEFCONFIG = \
AXEL_DISABLE_I18N=--i18n=0
After this bulk change, following manual fixups were done:
- fix line continuation alignment in cegui06 and spice (the sed
expression leaves the number of whitespace between the value and line
continuation character intact, but the whitespace before that could have
changed, causing misalignment.
- qt5base was reverted, as this package uses extensive alignment which
actually makes the code more readable.
Finally, the end result was manually reviewed.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Cc: Yann E. Morin <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_CONF_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_INSTALL_TARGET_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_INSTALL_TARGET_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While the autotools infrastructure was using FOO_MAKE_OPT, generic packages
were typically using FOO_MAKE_OPTS. This inconsistency becomes a problem
when a new infrastructure is introduced that wants to make use of
FOO_MAKE_OPT(S), and can live alongside either generic-package or
autotools-package. The new infrastructure will have to choose between either
OPT or OPTS, and thus rule out transparent usage by respectively generic
packages or generic packages. An example of such an infrastructure is
kconfig-package, which provides kconfig-related make targets.
The OPTS variant is more logical, as there are typically multiple options.
This patch renames all occurrences of FOO_MAKE_OPT in FOO_MAKE_OPTS.
Sed command used:
find * -type f | xargs sed -i 's#_MAKE_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the trailing slash is stripped from $($(PKG)_SITE) by pkg-generic.mk:
$(call DOWNLOAD,$($(PKG)_SITE:/=)/$($(PKG)_SOURCE))
so it is redundant.
This patch removes it from $(PKG)_SITE variable for BR consistency.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The help text of grub2 explains the detailed steps to create a disk
image with grub2 installed on it. However, the steps for the
BIOS-based systems have a few minor issues fixed by this patch:
- When calling partx to get the partitions detected, we should do it
on the /dev/loop0 block device, and not on the underlying disk.img
image file.
- The grub-bios-setup utility must be called as root to work properly
on /dev/loop0.
- The steps to cleanup the partx and loop device were missing.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since boot partition was not specified, grub tools try to detect it
automatically. This patch add an option to force it.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In preparation to add support for the SAMA5D3 Xplained board, this
commit bumps the version of the at91bootstrap3 bootloader to
v3.6.2. While doing this, it also:
- Allows this bootloader on Cortex-A5 based platforms, since SAMA5D3
are based on Cortex-A5.
- Removes a patch that no longer applies, and which has been taken
into account in at91bootstrap3 upstream.
- Switches to the upstream Github location as the source.
- Updates the installation commands to match upstream changes in the
installation process.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Ever since u-boot introduced the generic spl support in u-boot 2012.10, the
default spl output file has been spl/u-boot-spl.bin and not u-boot-spl.bin,
so use that as a more sane default value.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following the issues reported by Jerry <g4@novadsp.com>, it appears
that there are a number of U-Boot configuration variables we are not
checking properly, leaving users with weird behavior at build time.
This commit extends the existing U-Boot checks to verify that when a
custom version, custom tarball, or custom Git or Mercurial
repositories are selected, the appropriate fields are not empty in the
configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since syslinux can now install quite a number of files, install
them in a sub-directory of $(BINARIES_DIR) for clarity.
It also aligns it to rpi-firmware, grub2, gummiboot, that install
all of their files in a sub-dir of $(BINARIES_DIR), too.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This MBR blob will look for an active partition, and boot the bootcode
present in that partition. This can be used to boot an extlinux-prepared
partition.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Lundquist <lists@zelow.no>
Cc: Frank Hunleth <fhunleth@troodon-software.com>
Tested-by: Frank Hunleth <fhunleth@troodon-software.com>
Tested-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
syslinux can now also build an EFI application.
If the target is 64-bit, we build the 64-bit EFI app,
otherwise we build the 32-bit EFI app.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Frank Hunleth <fhunleth@troodon-software.com>
Tested-by: Frank Hunleth <fhunleth@troodon-software.com>
Tested-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This new version has a very, very weird build system. There are different
images that syslinux can now build:
- the plain legacy-bios images we already supported previously
- two new EFI32 and EFI64 applications
To build one or the other, the Makefile accepts one or more of:
make (bios|efi32|efi64)
Specify all of them, and it builds all. Specify 'install', and it installs
all of them, as one may expect.
Still a regular behaviour, is to build only a subset (down to one):
make bios <-- builds just the legacy-bios images
make efi32 bios <-- builds just the legacy-bios and efi32 images
Where it gets weird is the install procedure. Can you guess how it's done?
Hint: the syslinux guys have invented the multiple-argument parsing in
pure Makefiles. To build then install only the bios images, one would do:
make bios
make bios install
Yep, that's it. make bios install. Two arguments, one action.
That makes for some funky workarounds in our install procedure...
'bios' is the only image we support so far, with efi to come in a future
patch.
Using MAKE1, as there are issues with highly-parallel builds.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Frank Hunleth <fhunleth@troodon-software.com>
Tested-by: Frank Hunleth <fhunleth@troodon-software.com>
Tested-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The comments are not really part of the command we want to execute,
so move them out of the define-block. This also cleans up the output,
as they will no longer appear.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rewrite the options prompt in preparation to adding a new
type of image to install.
Add help entries to each option, too.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Frank Hunleth <fhunleth@troodon-software.com>
Tested-by: Frank Hunleth <fhunleth@troodon-software.com>
Tested-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently it is possible to choose either, both or none of
the pxelinux or isolinux images.
But it does not make sense to build none or both, as we need
at least one to boot the target, and the target can not use
more than one.
So, we need one and only one image to be selected at once.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Lundquist <thomasez@redpill-linpro.com>
Cc: Frank Hunleth <fhunleth@troodon-software.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Tested-by: Frank Hunleth <fhunleth@troodon-software.com>
Tested-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we hard-code the path to the images we install, and
expect them to be from the core/ sub-dir.
Not all images we can install are located in core/. For example,
the efi boot images (to come later) are not located in core/.
Prepare the upcoming installation of extlinux by not expecting
images be in core/.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Lundquist <lists@zelow.no>
Cc: Frank Hunleth <fhunleth@troodon-software.com>
Tested-by: Frank Hunleth <fhunleth@troodon-software.com>
Tested-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The pxelinux and isolionux images are 32-bit binaries, so we need a
compiler that can generate them (ie. a compiler that understands -m32).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Frank Hunleth <fhunleth@troodon-software.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Tested-by: Frank Hunleth <fhunleth@troodon-software.com>
Tested-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add an option for embedding a config file directly in grub.
Signed-off-by: Dima Zavin <dmitriyz@google.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The host variant of syslinux wasn't exposed anywhere, so the only way
to use it was to know that a "host-syslinux" target existed. Moreover,
thanks to commit 8e0d411898 ('syslinux:
install helper programs to the host'), the host utilities of syslinux
are automatically installed to $(HOST_DIR) when building the target
syslinux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Even though syslinux is built for the target, it does create helper
programs intended to be run on the host such as syslinux and extlinux.
This change installs these helper programs to the host so that they may be
called by post image creation scripts.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As stated in the buildroot user manual add just a single space before
and after a '=' sign.
Break long lines.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes#6986
Prior to u-boot 2013.10, the GPL license text was stored in COPYING and not
Licenses/gpl-2.0.txt, breaking legal-info.
Work around it by simply copying the file from the old location to the new
if present.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit updates boot-wrapper-aarch64 to the latest version. As it
now uses the autotools, we switch the package to the autotools-package
infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to a more recent version of the Debian patches for grub legacy,
that fix an incorrect build with gcc 4.6.
Fixes#6092 and #2629.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit aligns the Grub handling of the splash screen with what is
done in the ISO9660 code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
When BR2_TARGET_GRUB_SPLASH is enabled, we were passing
--enable-graphics, but when it was disabled, we were not doing
anything. However, in Grub, graphics support is enabled by default,
and you have to pass --disable-graphics to disable it.
Fix this by passing --enable-graphics or --disable-graphics as
appropriate.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
In 1cece2813b (grub: add option to
configure the list of supported filesystems), we introduced the
BR2_TARGET_GRUB_FS_SUPPORT option which allows to provide a
space-separated list of filesystems that Grub should support.
However, it turns out that this not very practical, because the
iso9660 filesystem logic in Buildroot should force the ISO9660 support
to be enabled in Grub, which is not easy to do with a string option.
Therefore, this patch changes this option from a string option to a
list of boolean option, one per filesystem supported.
A few useful details:
- Since Grub legacy is dead, the list of filesystem, and therefore
the number of options, will not grow.
- We have only added options for filesystems that are likely to be
used in an embedded Linux context. Filesystems such as VSTAfs,
Minix, UFS2 or FFS2 are not supported.
- There is no need to add some Config.in.legacy support for the
previous option, since it was added after Buildroot 2013.11, and
was therefore never part of an official Buildroot release.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
In preparation to a change to the configuration options of the
supported filesystem in Grub, enclose the network driver options in a
sub-menu.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
In the Config.in file of package foo, it often happens that there are other
symbols besides BR2_PACKAGE_FOO. Typically, these symbols only make sense
when foo itself is enabled. There are two ways to express this: with
depends on BR2_PACKAGE_FOO
in each extra symbol, or with
if BR2_PACKAGE_FOO
...
endif
around the entire set of extra symbols.
The if/endif approach avoids the repetition of 'depends on' statements on
multiple symbols, so this is clearly preferred. But even when there is only
one extra symbol, if/endif is a more logical choice:
- it is future-proof for when extra symbols are added
- it allows to have just one strategy instead of two (less confusion)
This patch modifies the Config.in files accordingly.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch lines up the comments of packages that need a Linux kernel to be
built by buildroot, to the format:
foo needs a Linux kernel to be built
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some boards are configured in u-boot to store multiple redundant copies of
the environment image in flash. For these boards, it is required to pass
the -r flag, when generating a boot environment image using mkenvimage.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported by Matthew Weber, Grub doesn't build on 64 bits build
machines, because the host compiler produces 64 bits binaries by
default, while Grub should be built 32 bits. Therefore, this commit
passes -m32 to the Grub CFLAGS, so that 32 bits binaries are always
produced.
Reported-by: Matthew Weber <mlweber1@rockwellcollins.com>
Cc: Matthew Weber <mlweber1@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Matthew Weber <mlweber1@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These instructions should probaby go in the Buildroot manual, but at
this point, it's not clear in which section they should go. So in
order to not loose those notes, add them to the Grub help text.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Grub can be configured to enable or disable the filesystems supported
in the stage 2. In addition, there are filesystem specific stage
1.5. In order to save space and build time, we provide a new option
that allows to give a space-separated list of filesystems that Grub
should support.
We default to support FAT and ext2, since most of the other
filesystems are fairly unlikely to be used.
We use this option to:
1) Pass --enable-<fs> or --disable-<fs>, which enables/disables the
support of <fs> in Grub stage 2.
2) Install only the stage 1.5 that correspond to the selected
filesystems.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Make the splashimage line in menu.lst only active when splashimage
support has really been enabled in the Grub configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
