Several i.MX8 (e.g.: 8M, 8MM, 8MN) support many DDR types (LPDDR4, DDR4,
etc.), for which the DDR training is performed in the bootloader.
Some boards have LPDDR4 (e.g.: nitrogen8mn) and some others have the DDR4
(e.g.: NXP's reference board EVK). This patch allows the selection of either
of the binaries used to train the DDR.
Note that DDR and HDMI FW copies are now separated, which makes latter
being properly copied only for the relevant SoC (i.MX8MQ).
Suggested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Reviewed-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
Reviewed-by: Julien Olivain <julien.olivain@oss.nxp.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Only some i.MX8 needs a DDR training firmware (8M, 8MM, 8MN). Some other
i.MX8 (QuadMax, QuadXPlus) rely on system controller for that task.
Suggested-by: Julien Olivain <julien.olivain@oss.nxp.com>
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
[yann.morin.1998@free.fr:
- use the new variable to drive the firmware installation
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This CPU requires the same (LP)DDR training binaries as i.MX8M Mini.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Cc: Refik Tuzakli <tuzakli.refik@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 8cc27a292e updated package
version but did not updated hashes for EULA and COPYING license files.
The patch fixes "make legal-info" for firmware-imx package. Also
adopt new spacing convention in .hash files (two spaces).
Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This package needed to be updated to be aligned with NXP
BSP 4.19.35_1.1.0
This newer 8.5 version no longer include ahab-container images.
Those images are now in a separate imx-seco package.
Signed-off-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
Reviewed-by: Julien Olivain <julien.olivain@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
After the firmware-imx bump to version 8.1.1 the following
error is observed when building freescale_imx8qxpmek_defconfig:
>> firmware-imx 8.1.1 Installing to images directory
cp /home/fabio/buildroot/output/build/firmware-imx-8.1.1/firmware/seco/ahab-container.img
/home/fabio/buildroot/output/images/ahab-container.img
cp: cannot stat
'/home/fabio/buildroot/output/build/firmware-imx-8.1.1/firmware/seco/ahab-container.img':
No such file or directory
In the firmware-imx-8.1.1 (and newer) the i.MX8QXP container image was
renamed to mx8qx-ahab-container.img, so fix it accordingly.
Fixes: 3ec818769d ("package/freescale-imx/firmware-imx: bump version to 8.1.1")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
License files were updated since the previous version.
This patch update to the new license hashes. It also fixes the
"make legal-info" command failure due to the hash mismatch.
Fixes:
- http://autobuild.buildroot.org/results/d9d/d9d82dd6727b82a643cbb75ca33b88a4636bd5fe
Signed-off-by: Julien Olivain <juju@cotds.org>
[yann.morin.1998@free.fr: add autobuilder reference]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This version is aligned with i.MX NXP BSP components version
rel_imx_4.14.98_2.0.0_ga
Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This new package includes new binaries for i.MX8QXP.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This update includes GA version of the DDR training binaries for i.MX8M.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com>
Signed-off-by: Christopher Dahlberg <crille.dahlberg@gmail.com>
[Thomas: use an intermediate FIRMWARE_IMX_DDRFW_DIR variable.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Instead of DL_DIR, the package should now use $(PKG)_DL_DIR to ease the
transition into a new directory structure for DL_DIR.
This commit has been generated with the following scripts:
for i in $(find . -iname "*.mk"); do
if ! grep -q "\$(DL_DIR)" ${i}; then
continue
fi
pkg_name="$(basename $(dirname ${i}))"
[ "${pkg_name}" = "package" ] && continue
raw_pkg_name=$(echo ${pkg_name} | tr [a-z] [A-Z] | tr '-' '_')
pkg_dl_dir="${raw_pkg_name}_DL_DIR"
sed -i "s/\$(DL_DIR)/\$($pkg_dl_dir)/" ${i}
done
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The fsl-epdc.mk file is no longer shipped with the package.
Add license files hashes.
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changelog:
- Upgrade to FW v3.1.1_r46072
- v3.1.1_r46070 plus 2 patches 391/392
- FSLARIK-391 [Decoder/H.264] VPU is always busy when decoding an
erroneous H264 bitstream
- FSLARIK-392 [Decoder/VC1] VPU outputs only 1 picture
- Change to the format of Linux coda driver firmware
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/dbb8773
Implicitly tested through gstreamer as the plugin relies on it:
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
Signed-off-by: Andrew Webster <awebster@arcx.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
- Add basic epdc firmware copy to correct output path
- Move legacy epdc firmware to this package out of kernel
- VPU firmware upgrade to v3.1.1_r46070
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/0fdf829
This package has been implicitely tested through gstreamer as the
plugins rely on them for vpu decoding for instance:
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use a different versioning schema based on package versioning
instead of BSP version. This way, if a new BSP version does
not bump this package, we can keep this package unchanged as well.
VPU firmware upgraded to v3.1.1_r46067
- Low Latency fixes for H.264 encoder
- Wrong frame number fix for H.264 decoder
- Decode failure fix for H.264 decoder with multi-SPS/PPS headers
The package adds the EPDC waveforms and the needed changes to properly
install those were done in the firmware-imx.mk file.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/d869826https://github.com/Freescale/meta-fsl-arm/commit/075a5b1
This package has been implicitely tested through gstreamer as the
plugins rely on them for vpu decoding for instance:
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
[Thomas:
- fix typo in commit logs
- remove ; \ and ; at the end of commands, since they were not
needed.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add hash files for the updated packages.
Also update the license of firmware-imx.
This patch is based on the Yocto equivalent:
5521d77c9f191b5808cb3bad4af9484ac
Those packages have been implicitely tested through gstreamer as the
plugins rely on them for vpu decoding for instance:
# gst-launch-0.10 playbin
# uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Current firmware-imx version no longer contains ath6k and ar3k firmware.
Cc: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Part of fimrware-imx were dropped in the new version, so we have less
legal-info to save.
Fixes:
http://autobuild.buildroot.org/results/59b/59b09152700a5839af46edb554e53981569f8921
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch consolidates the URLs for various Freescale-supplied
packages to use FREESCALE_IMX_SITE.
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Reviewed-by: "Thomas Petazzoni" <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit moves the firmware-imx package to the newly introduced
freescale-imx/ directory, and uses the new variables provided by
freescale-imx/freescale-imx.mk.
Signed-off-by: Henk Fijnvandraat <h.fijnvandraat@inter.nl.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
