There was one instance of DL_DIR that was left out. Fix that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit fixes a few minor spelling or grammar mistakes since the recent
additions to the manual (commits 0b100de2cf to
7cbb476661).
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: adjust wording as suggested by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ELDK now relies on Yocto, so it no longer has the funky
non-standard way of doing multilib. Also, we didn't mention that Yocto
toolchains/SDK are not suitable for usage with Buildroot. Therefore,
this commit rewords this part of the documentation to explain that
Yocto/OpenEmbedded SDKs cannot be used as external toolchains in
Buildroot, and why.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Replace ADI by Analog Devices, which is clearer for most people, and
remove the Xilinx external toolchains since we have deprecated them.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we have eglibc and glibc support in the internal backend, and
no longer marked as experimental, a little bit of rewording is
needed. It is no longer necessary to indicate that uClibc was
historically supported as the only C library, and that the glibc
support is experimental. We also update the rest of the description to
be less uClibc specific.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: adjust wording as suggested by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There is no need to tell people that they should remove stamp files: they
should use the make <pkg>-reconfigure and make <pkg>-rebuild make targets
instead. We still keep an explanation about stamp files, just to give the
user an insight on how Buildroot works internally.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using a relative path for O=... has limitations, since it is interpreted
relative to the Buildroot tree, and thus may lead to unexpected results.
For example, running this:
make -C buildroot O=my-O
will not create my-O in the current working directory, but as a
sub-directory of the Buildroot tree, here in buildroot/my-O
Explain this in the manual (as is similarly done for BR2_EXTERNAL).
Also add a note that $(O) will be created if missing.
Also change O=.. and -C .. to O=<...> and -C <...> to make it explicit
this is an ellipse, not a relative path.
Reported-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Although it is possible to use relative paths, there are a few pitfalls
when doing so.
To avoid confusion for a (newcoming) user, use absolute paths in the
manual (as is done in examples for $(O)), since it is guaranteed to be
working without corner cases.
[Peter: s/relatively/relative/ as suggested by Thomas]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It comes up every now and then on the list, so better be prepared to
point at the manual, rather than rehash the same every time.
Most of the chapter is a copy-paste of the report from the Buildroot
Developpers Day in Pragues, 2011-10-28:
http://lists.busybox.net/pipermail/buildroot/2011-November/047229.html
We consider the opinions expressed in that report to be still valid
now, two years later.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a small icon that links the Buildroot home page to our Google+
page.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch updates the /dev management section in the manual with information
about eudev, which replaces udev.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch converts udev to a virtual package. For the moment, there is only
one provider for the udev features: eudev.
Packages meant to provide udev-like features must select the symbol
BR2_PACKAGE_HAS_UDEV.
Packages depending on BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV or
BR2_PACKAGE_UDEV have been converted to use the new symbol.
[Peter: move legacy symbols under 2014.05]
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As the e-mail address buildroot@buildroot.org is now enabled, update the
e-mail addresses in the source tree from @uclibc.org and @busybox.net to our
own proper domain.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To make the naming consistent (all user-visible options should be
prefixed with BR2_).
An entry is added to Makefile.legacy to warn users who have set
BUILDROOT_CONFIG but not BR2_CONFIG.
Still export BUILDROOT_CONFIG but pointing to some phony value, to
make sure that scripts that still use it fail in a predictable way.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To make the naming consistent (all user-visible options should be
prefixed BR2_).
An entry is added to Makefile.legacy to warn users who have set
BUILDROOT_DL_DIR but not BR2_DL_DIR.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The manual is a bit vague about whether Config.in and external.mk
are mandatory or optional.
Make it explicit in the manual that they are mandatory.
Reported-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Try to clarify how the wrapper passes arguments and why.
This is mainly because the output you can see when you build, does not
reflect what is invoked by the wrapper.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: s/Hangout/Hangouts/, line wrap]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is not buildroot convention to align the = signs in .mk files, so this
shouldn't be suggested in the manual.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter has just pointed me to the PGP signatures of the release tarballs,
which exist since he's been doing releases.
This was not obvious to me that the releases were signed, as there was
no info about it on the website.
So, add such links on the downloads page.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[yann.morin.1998@free.fr: some cleanups and rephrasing]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported by Ryan, it is not well-known that most tools can deal
efficiently with big sparse files.
Add a section in the manual about this, with tar and cp used as
examples, and a hinting to the man pages for the others.
Reported-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ryan Barnett <rjbarnet@rockwellcollins.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the manual uses the last modification date and time of
manual.txt in the generated manual.
This is confusing, especially for long-checked-out repositories where
the top-level manual.txt has not changed since the check out. Moreover,
the manual explicitly states 'generated on', which is confusing at best.
Use the current date and time instead.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If U-Boot patches are nested under BR2_GLOBAL_PATCH_DIR, then the
subdirectory should be called "uboot", and not "u-boot".
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Apache licenses are referred to in a variety of ways; standardise these,
choosing a form which does not contain whitespace.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
PDF files can not be easily embedded in other documents (eg. ODT, or HTML).
Add support for generating PNG graphs, by setting the GRAPH_OUT=pdf|png on
the command line:
make GRAPH_OUT=png graph-build graph-depends
The default is still to generate PDF graphs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Generate the build-time graphs by calling:
make graph-build
This generates the graphs in $(O)/graphs/
It is possible to use the alternate color-scheme by setting the variable
GRAPH_ALT=1 on the command line:
make GRAPH_ALT=1 graph-build
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Updating the documentation to reflect that multiple directories can
now be specified for BR2_GLOBAL_PATCH_DIR. Along with giving an
example use case of how to use multiple global patch directories.
[Thomas: fix minor typo mentionned by Thomas De Schampheleire.]
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
