It's rather unclear that uboot.sb, uboot.sd and uboot.nand are
Freescale i.MX28 specific, so let's make that clear in the prompt of
each option, like we do for the Marvell-specific uboot.kwb.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the patchset "kconfig: turnaround into single .config"
[http://lists.denx.de/pipermail/u-boot/2015-February/205490.html]
U-Boot switched to a single .config file for board configuration. This
allows us to use the kconfig-package infrastructure.
For providing backward compatibility with older U-Boot version a user
choice between the new Kconfig and the legacy build system is
introduced.
[Thomas:
- make use of the legacy build system the default, to not break
existing configurations.
- add some comments in the code checking all the configuration
options, in order to hopefully make it a bit clearer.]
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we're only fixing libtool's .la files for autotools packages,
and even more so, only for those that do not define their own
_INSTALL_STAGING_CMDS.
However, .la files might also be installed by non-autotools packages,
like the NVidia GPU binary blob (libGL.la).
So, move that code into the global build rule, so all packages get their
.la files fixed, whether they be autotools packages or not, and whether
they define their own _INSTALL_STAGING_CMDS or not.
Also print a message.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- fix indentation of select BR2_PACKAGE_ZLIB in Config.in
- rewrap Config.in help text, lines were too long
- remove depends on BR2_PACKAGE_QT || BR2_PACKAGE_QT5, since
quazip/Config.in is already only included if one of Qt4 or Qt5 is
enabled.
- remove QUAZIP_SOURCE definition, since its value was the default
- add the missing zlib dependency in the .mk file
- add spaces around '=' signs when setting QUAZIP_QMAKE
- pass $(TARGET_MAKE_ENV) at install time]
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch changes the U-Boot's default environment to
boot Zedboard out-of-the-box from SD card.
The sdboot procedure tries to load a file system.bit into
the Zynq's PL (only if it exists). It is also possible to
alter the booting by an uEnv.txt file located on your SD card.
The uEnv.txt is a plain text file with <key>=<value> pairs
one per line.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The U-Boot v2015.07 builds working SPL without a manual
intervention. The BOOT.BIN is generated from the standard
SPL so no BR2_TARGET_UBOOT_SPL_NAME redefinition is needed.
The SPL requires the u-boot-dtb.img file to boot properly.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit integrates generation of a bootable image
for Xilinx Zynq. The generation is independent on Xilinx
flow and utilizes the host-zynq-boot-bin package. The only
required step is to generate a proper U-Boot SPL (instead
of the FSBL).
The SPL generation might work when providing the working
ps7_init.c file to U-Boot. However, from U-Boot 2015.07
a set of generic ps7_init.c files is included and used to
build the U-Boot SPL for various boards. The ps7_init.c file
has been released under GNU/GPL license for this purpose.
For details, see
http://lists.denx.de/pipermail/u-boot/2015-April/210664.html
The SPL searchs for u-boot-dtb.img when booting so we
enforce using of the BR2_TARGET_UBOOT_FORMAT_DTB_IMG format.
[Thomas: remove select of BR2_PACKAGE_HOST_ZYNQ_BOOT_BIN, since this
option no longer exists.]
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The package provides a Python script that can create the file BOOT.BIN
to boot Xilinx Zynq based boards.
The script zynq-boot-bin.py is contained in the Xilinx repository of
U-Boot (it is not in upstream).
[Thomas:
- remove appearance of the package in menuconfig, U-Boot will depend
on it directly, so there's no need for it to appear in menuconfig
- use $(INSTALL) instead of cp for the installation
- remove @ before the extract and install commands.]
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Recently uClibc got support of "savedefconfig" target that allows
generation of compact configuration description which only lists
differences from default options.
That's uClibc commit -
http://git.uclibc.org/uClibc/commit/?id=e286a674419d31cb0757dd2f8307d8b4756cf1f9
This change represents post-processing of "uClibc-snapshot.defconfig"
and "uClibc-ng.config" with "make savedefconfig" made on current
uClibc/master and uClibc-ng/1.0 branches accordingly.
Unfortunately the most recent stable uClibc version 0.9.33.2 doesn't
have "savedefconfig" target so I'm leaving uClibc-0.9.33.config as it
is.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch bumps mono to version 4.0.2.5
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The package now offers the possibility to install Python and/or C#
bindings if the Python and Mono packages are detected.
v2: Patch generated with 'git format-patch -M' and fix indentation in libiio.mk
v3: Updated libiio.hash file
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Spotted during package review/testing, but forgot to squash it in the
original patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now when ARC toolchain also supports NPTL both Qt's Script and WebKit
modules could be successfully built and then executed on ARC.
[Thomas: fix alphabetic ordering.]
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adding the cpio archive utility for the target and host. Patches have
been pulled from ArchLinux and Gentoo to fix CVE issues and compile
issues.
[Thomas: remove host variant of the package, as discussed during the
review of earlier version.]
Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: in the sed expression, use % as a delimiter instead of /,
since the line contains several / that all had to be escaped.]
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: remove S30dbus changes.]
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- remove the patch from Matthew Weber that did a lot of changes that
were not needed: the CFLAGS would not get overridden by Buildroot
ones if the Buildroot TARGET_CONFIGURE_OPTS is passed on the left
hand-side of make, and the SULOGINLIBS hack needs to be replaced
by a proper handling of the libcrypt detection.
- added a patch that changes the libcrypt detection logic to accept
a SYSROOT variable. Instead of search for /usr/lib/libcrypt.a, it
search for $(SYSROOT)/usr/lib/libcrypt.a. This avoids the need for
overriding SULOGINLIBS.
- don't modify TARGET_CONFIGURE_OPTS in sysvinit.mk, this is
completely forbidden and broken.
- don't pass ROOT= since we don't use 'make install' anyway.]
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a configure option to enable the SELinux support in the
busybox configuration from the Buildroot menuconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Modern ARC cores (those sporting MMU of version 3 and 4) allow selection
of different page sizes (4, 8 or 16 kB) during ASIC design creation.
And it's important to build a toolchain with page size setting that matches
hardware.
Otherwise user-space applications will fail on execution due to
unexpected data layout/alignment etc.
[Thomas: slightly improve help text, fix indentation of help text.]
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
xserver_xorg-server depends on libepoxy for glamor support, therefore we
use this package as an indicator whether glamor support is present.
Fixes https://bugs.busybox.net/show_bug.cgi?id=8171
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When xserver_xorg-server is built without composite support building this
package will fail:
radeon_dri2.c: In function 'radeon_dri2_copy_region2':
radeon_dri2.c:438:28: error: 'struct _Pixmap' has no member named 'screen_x'
off_x = drawable->x - pPix->screen_x;
^
radeon_dri2.c:439:28: error: 'struct _Pixmap' has no member named 'screen_y'
off_y = drawable->y - pPix->screen_y;
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patch upstream so drop it.
Also use main dhcpcd.c file as license info (it's in the header).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit bee5745c introduced an extra level of 'make' when the umask is
different from 0022. However, when several targets were specified on
the command line, a new make instance would be called for each target.
This introduces a huge performance overhead when many targets are
specified on the command line.
To fix this, use the same approach as used in the mkmakefile script:
an addition target on which the MAKECMDGOALS depend, so that this
target is run only once.
Note that the mkmakefile script contains a special exception for
Makefile, because the Makefile in the output directory is generated.
Since the top-level Makefile is not generated, this exception is not
needed here.
While we're at it, also fix the whitespace in the UMASK assignment.
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr: aggregate patches from Arnout and Guido]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
