Systemd v216+ includes a configure option to disable ldconfig.
Signed-off-by: Gabe Evans <gabe@hashrabbit.co>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Added back the hash as it was discussed during the last Buildroot Dev
Days.
Signed-off-by Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
systemd is increasingly expecting things to live in /usr/bin, /usr/sbin
or /usr/lib nad not in /bin, /sbin or /lib. It has inherited those
expectations from a Fedora change:
https://fedoraproject.org/wiki/Features/UsrMove
Note however, that systemd does support /usr being on a separate
filesystem; it just expects an initramfs to mount it before the final
switchroot over to the actual rootfs.
But the traditional use-case for Buildroot is not to boot with an
initramfs; although that is totally feasible, that's probably not what
is commonly done in the vast majority of cases.
However, a lot of packages still install stuff directly into /bin,
/sbin or /lib, which systemd may need early-on in the boot process,
even before it may have a chance to mount /usr. Even though we can
tell systemd, at configure-time, where it should expect programs to
be at runtime, it does not make sense to go head-first against an
upstream wa^Hill.
Add an option so that /bin, /sbin and /lib be symlinks to /usr/bin
and /usr/sbin. That option is forcibly enabled when the init system
is systemd.
Note: we need not handle /lib32 or /lib64, as they already are symlinks
to /lib, which means they will automatically be redirected to /usr/lib,
as /usr/lib32 and /usr/lib64 already are.
Furthermore, this means we're no longer supporting a split-usr setup, so
the corresponding configure options have been removed as well for
systemd and, when using a merged /usr, for eudev as well.
In Buildroot, we decided (with this patch) not to support a split-usr
when systemd is used as an init system. This is a design decision, not
a systemd issue. Thus the select is with BR2_INIT_SYSTEMD rather than
with BR2_PACKAGE_SYSTEMD.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Mike Williams <mike@mikebwilliams.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Tested-by: Mike Williams <mike@mikebwilliams.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
systemd seems to do its release using their github repository up from
the 221 version.
Since they use the auto generated release, we can't have a hash file.
They don't provide the Makefile.in file in the 'po' directory.
We need to run intltoolize so it's created for us.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Tested-by: Mike Williams <mike@mikebwilliams.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As libgudev recently was split from the main systemd/udev source, this
library is now required to build certain packages.
This library is only relevant to systemd, as the code it contains is
still contained in eudev.
[Thomas:
- don't show the dependency comment when systemd is not available,
since libgudev is anyway useless when you're not using systemd.
- fix the license, it's LGPLv2.1+ and not GPLv2+
- remove useless empty lines in the .mk file.]
Signed-off-by: Nathaniel Roach <nroach44@gmail.com>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the future when the kernel offically supports kdbus, this option
should automatically enable the kernel kdbus config option(s).
Signed-off-by: Ryan Barnett <ryanbarnett3@gmail.com>
Tested-by: Mike Williams <mike@mikebwilliams.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Systemd depends on mount and nologin from util-linux. Mount from busybox
is not fine, because its behavior differs from util-linux mount. Busybox
mount does not handle correctly 'mount / -o remount' (should apply
options from /etc/fstab). Nologin should be present, because
systemd-sysusers uses it as shell for newly created system users.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of doing a removal of the completion file package per package,
do it all at the finalize stage so it's done once and for all.
Note: This fixes an issue with systemd where passing a --bashcompletiondir
or --zshcompletiondir would be evaluated to '.' by the autotools macro.
This would create a 'target./' directory.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Bump to version 221
- Update hash file
- Add --disable-gnuefi to configure options to avoid a failure like this
one:
checking for /usr/lib/gnuefi/elf_ia32_efi.lds... configure: error:
cannot check for file existence when cross compiling
- Remove gudev logic since it has been removed from the systemd tree and
it is now an external project.
Announcement URL:
http://lists.freedesktop.org/archives/systemd-devel/2015-June/033170.html
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The option is a non-option now and will be removed.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that largefile is mandatory removes package dependencies and
conditionals.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Bump version to 219
- Update the hash file
- Remove non-existent configure options
- Adapt patch to make it apply on version 219
Packages depending on systemd (bluez5-utils, dbus, liblogging,
pulseaudio) have been built successfully with this new version.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
package/systemd, package/kmod, package/util-linux: don't install
bash-completion files if bash is not selected to be installed.
Otherwise, install bash-completion files.
package/systemd: don't install zsh-completion files is zsh is not
selected to be installed. Otherwise, install zsh-completion files.
package/util-linux: don't install empty
/usr/share/bash-completion/completions directory if bash is not going to
be installed, and install bash-completion files if bash is selected to
be installed.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since a while, the semantic of BR2_PREFER_STATIC_LIB has been changed
from "prefer static libraries when possible" to "use only static
libraries". The former semantic didn't make much sense, since the user
had absolutely no control/idea of which package would use static
libraries, and which packages would not. Therefore, for quite some
time, we have been starting to enforce that BR2_PREFER_STATIC_LIB
should really build everything with static libraries.
As a consequence, this patch renames BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS, and adjust the Config.in option accordingly.
This also helps preparing the addition of other options to select
shared, shared+static or just static.
Note that we have verified that this commit can be reproduced by
simply doing a global rename of BR2_PREFER_STATIC_LIB to
BR2_STATIC_LIBS plus adding BR2_PREFER_STATIC_LIB to Config.in.legacy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
- Bump version to v217
- Add a hash file
- Adapt the needed patches
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's used by 50-default-udev.rules for input-class devices.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove --localstatedir=/var from all autotools packages where it is no longer
needed.
Also remove --localstatedir=/var/lib/dhcp from package dhcp. localstatedir is
used by dhcp to set the default directory for the leases files. This can also
be done by setting --with-*-lease-file=/var/lib/dhcp/*, which is done in
dhcp.mk.
A custom --localstatedir is left in:
* proftpd.mk
* mysql.mk
This is safe to do:
One of the good thing with autoconf is that if you pass:
--localstatedir=/var ... --localstatedir=/var/something
Then /var/something will be used. So, we can set --localstatedir=/var
by default in the infrastructure, and still have certain packages doing
weird things override it. [Thanks to Thomas Petazzoni]
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Do not create a [serial-]getty link if BR2_TARGET_GENERIC_GETTY is not set.
Might be useful for custom setups (rootfs overlay).
[Peter: use BR2_TARGET_GENERIC_GETTY_PORT to match the code below]
Signed-off-by: André Erdmann <dywi@mailerd.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When trying to run a buildroot system configured with
BR2_TARGET_GENERIC_GETTY_PORT="tty1" (x86_64), the boot process hangs
with the following message:
"A start job is running for dev-tty1.device (<time> / 1min 30s)"
Replacing /etc/systemd/system/getty.target.wants/serial-getty@tty1.service
(linking to serial-getty@) with getty@tty1.service (-> getty@) fixes the issue.
This patch adds a check that "detects" the tty type by removing digits at the
end of BR2_TARGET_GENERIC_GETTY_PORT and comparing the resulting base name.
An instance of getty@service gets created if the name matches "tty",
otherwise serial-getty@ gets instantiated (as before).
So, tty1,tty2,... are created as links getty@tty1.service -> getty@,
while ttyS0, ttyAMA0, ... are created as instances of serial-getty@.
[Peter: simplify logic]
Signed-off-by: André Erdmann <dywi@mailerd.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_CONF_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While the autotools infrastructure was using FOO_MAKE_OPT, generic packages
were typically using FOO_MAKE_OPTS. This inconsistency becomes a problem
when a new infrastructure is introduced that wants to make use of
FOO_MAKE_OPT(S), and can live alongside either generic-package or
autotools-package. The new infrastructure will have to choose between either
OPT or OPTS, and thus rule out transparent usage by respectively generic
packages or generic packages. An example of such an infrastructure is
kconfig-package, which provides kconfig-related make targets.
The OPTS variant is more logical, as there are typically multiple options.
This patch renames all occurrences of FOO_MAKE_OPT in FOO_MAKE_OPTS.
Sed command used:
find * -type f | xargs sed -i 's#_MAKE_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix minor typo in commit title.]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump systemd to version 216. This new version provides two new tools to
manage the journal (systemd-journal-upload and systemd-journal-remote)
which resulted in the addition of new users.
Also remove backported patches.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported in https://bugs.busybox.net/show_bug.cgi?id=7286,
systemd fails to build with BR2_OPTIMIZE_2=y. This mode activates the GCC
options -flto and -ffat-lto-objects, which do not mix well with the GCC
tricks used in src/compat-libs/linkwarning.h to build the compatibility
libraries.
As a temporary workaround, this patch disables link time optimization for
systemd.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the trailing slash is stripped from $($(PKG)_SITE) by pkg-generic.mk:
$(call DOWNLOAD,$($(PKG)_SITE:/=)/$($(PKG)_SOURCE))
so it is redundant.
This patch removes it from $(PKG)_SITE variable for BR consistency.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since version 215, systemd installs a service to execute /sbin/ldconfig
when the sysinit target is reached.
Unfortunately, /sbin/ldconfig is not installed on a target built using a
glibc-based toolchain.
As this service is not mandatory, it is now disabled, thus avoiding a
warning in the journal.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump systemd to version 215.
Also refresh the patch reverting the use of `ln --relative`.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If support for systemd-timesyncd is selected, install the associated
service.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch bumps systemd to version 214.
Changes:
- add new users: systemd-bus-proxy, systemd-network and systemd-resolve.
- remove gtk-doc patch, as it is no longer needed.
- remove attr dependency (extended attributes functions are provided by
glibc).
- enable nss-myhostname, so local hostname changes are properly handled.
- add hook to install symlink to resolv.conf when using
systemd-networkd.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The path for kmod used in kmod-static-nodes.service is the one found by
the ./configure script, which ends up being the path to the host kmod
program.
This patch forces the path to the target kmod program.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The installation of the network.service and serial-getty.service unit
files are now performed via the <pkg>_INIT_SYSTEMD mechanism instead of
an installation hook.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add and enable a systemd unit file to bring up or down network with ifup /
ifdown, analogous to the skeleton/etc/init.d/S40network init script.
Signed-off-by: Ivan Sergeev <vsergeev@kumunetworks.com>
[eric.le.bihan.dev@free.fr:
- rebase
- install service only if systemd-networkd is not selected]
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch installs a copy of libgcrypt.m4 from the libgcrypt source tarball
to systemd m4 directory.
Libgcrypt uses a custom m4 macro and not pkg-config to check if the
development files are available. Though libgcrypt support is optional in
systemd, this macro should be available whenever autoreconf is used,
otherwise the re-configuration will fail with:
configure.ac:616: warning: macro 'AM_PATH_LIBGCRYPT' not found in library
The call to autoreconf is required, as it is needed by the patch which
solves the `ln --relative` issue.
As asking the user to install the development package of libgcrypt on
the host machine or adding libgcrypt as a build dependency to systemd is
not acceptable, the required file is added to the m4 directory.
Fixes: http://autobuild.buildroot.net/results/1524d346fa17749e2ae62e063b9cfdd0de95c76a/
Fixes: http://autobuild.buildroot.net/results/10bcd92437eaa27eb61f8281c93efcb53d555e35/
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A new configuration option is available in systemd menu, to enable
support for SMACK.
For this feature to properly work, systemd requires attr (build
dependency, also used for other features) and smack (runtime dependency).
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch bumps systemd to v213.
This new version introduces systemd-timesyncd, a SNTP daemon. This
feature can be enabled if systemd-networkd is selected via the
configuration menu. It is a simple alternative to ntpd, useful for
machines without a RTC.
The patch for reverting the use of --relative option when calling `ln`
has been refreshed, as the configure script now checks if `ln` supports
the --relative option and fails if it does not.
Another patch for the proper deactivation of gtk-doc has been added.
All these steps now require an autoreconf.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This enables powerpc64 and powerpc64le. Currently, le needs at least
glibc 2.19 and gcc 4.9.0. For gdb, 7.7.1 works (added in an earlier
patch).
[Peter: also disallow gcc 4.8 for ppc64le]
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since systemd 209, some libraries have been merged into libsystemd.so:
- libsystemd-daemon.so
- libsystemd-id128.so
- libsystemd-journal.so
- libsystemd-login.so
A new configuration menu entry has been added to enable the installation
of compatibility pkg-config files, so that programs that depend on them
can still be built.
[Thomas: as suggested by Yann during the review, add an else clause
with --disable-compat-libs.]
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Systemd build system now uses the `--relative` option from `ln(1)`.
This option was added to GNU coreutils 8.16, which is not widely
deployed yet by GNU/Linux distributions (not available in Debian Wheezy
for example).
Fixes: http://autobuild.buildroot.net/results/354/3546c003a8fcbb36ef5ba29c00a96e473b927ecb/
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
