It wasn't immediately obvious to me what the two Buildroot base test
classes were for, so add docstrings to explain the differences between
BRConfigTest and BRTest.
Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Traditional VT-10x terminals (and their emulators) [0] have a "magic
margins" feature that enables the last character position to be updated
without scrolling the screen: whenever a character is printed on the
last column, the cursor stays over the character, instead of moving to
the next line.
The Busybox shell, ash, attempts to defeat this feature by printing
CR,LF right after echoing a character to the last column.[1] This
doesn't play well with emulator.py. The run() method of the Emulator
class captures the output of the emulated system and assumes the first
line it reads is the echo of the command, and all subsequent lines are
the command's output. If the line made by the command + shell prompt is
longer than 80 characters, then it is echoed as two or more lines, and
all but the first one are mistaken for the command's output.
We fix this by telling the emulated system that we are using an
ultra-wide terminal with 29999 columns. Larger values would be ignored
and replaced by the default, namely 80 columns.[2]
[0] https://vt100.net/docs/vt100-ug/chapter3.html - DECAWM
[1] https://git.busybox.net/busybox/tree/libbb/lineedit.c?h=1_34_0#n412
[2] https://git.busybox.net/busybox/tree/libbb/xfuncs.c?h=1_34_0#n258
Signed-off-by: Edgar Bonet <bonet@grenoble.cnrs.fr>
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Co-authored-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When booting under EFI, grub2 will output a nice and shiny boot menu,
using extended ASCII characters (in the [0x80..0xFF] range), namely
CP437 [0], on the assumption that the VGA BIOS is a real one and has the
corresponding (and only!) font, as is the case on real hardware.
However, when run in our runtime test infrastructure, this triggers the
infamous python UnicodeDecodeError exception:
Traceback (most recent call last):
[...]
emulator.login()
File "[...]/buildroot/support/testing/infra/emulator.py", line 89, in login
index = self.qemu.expect(["buildroot login:", pexpect.TIMEOUT],
File "/usr/lib/python3/dist-packages/pexpect/spawnbase.py", line 340, in expect
return self.expect_list(compiled_pattern_list,
File "/usr/lib/python3/dist-packages/pexpect/spawnbase.py", line 369, in expect_list
return exp.expect_loop(timeout)
File "/usr/lib/python3/dist-packages/pexpect/expect.py", line 111, in expect_loop
incoming = spawn.read_nonblocking(spawn.maxread, timeout)
File "/usr/lib/python3/dist-packages/pexpect/pty_spawn.py", line 485, in read_nonblocking
return super(spawn, self).read_nonblocking(size)
File "/usr/lib/python3/dist-packages/pexpect/spawnbase.py", line 178, in read_nonblocking
s = self._decoder.decode(s, final=False)
File "/usr/lib/python3.8/codecs.py", line 322, in decode
(result, consumed) = self._buffer_decode(data, self.errors, final)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xda in position 0: invalid continuation byte
Grub2 is not wrong in emitting those chars, and basically we should not
expect the packages we test to always emit correct UTF-8 sequences; at
the very least, this should not cause the test infra to fail.
We fix that by telling pexpect.spawn to "fix" such invalid sequences by
replacing them with the suitable Unicode character, U+FFFD REPLACEMENT
CHARACTER.
[0] https://en.wikipedia.org/wiki/Code_page_437
[1] https://docs.python.org/3/library/codecs.html#error-handlers
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
[yann.morin.1998@free.fr:
- don't change encoding, use codec_errors
- rewrite commit log accordingly
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Some tests will need to grep through the build log to verify that some
features are working are expected. In order to allow them to open the
build log, we provide a new function called log_file_path(), which
returns the path to the log file if available.
We also use this function in open_log_file().
Note that open_log_file() cannot be used directly to grep through the
log file at the end of a build: because it opens in "a+" mode, it
greps starting from the end of the file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since Qemu 5.1, SD card images must have a size that are a power of
two. While some filesystem (such as ext2/3/4) allow to specify the
expected size of the filesystem, others such as SquashFS do not have
this capability.
We were already extending the size of such images to the next 1 MB
boundary using "truncate -s %1M", but that is no longer sufficient. So
instead, we introduce a helper function that extends the size of an
image to the next power of two.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- use f.trunctate() rather than subprocess.call([truncate,...])
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The pre-built vexpress kernel used by the testing infrastructure is a
4.0.0 kernel, which is getting old to be used with reasonably recent
toolchains.
This commit updates the pre-built kernels for both the versatile and
vexpress machines to 5.10.7 (they have already been put online).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, the build continue even if some symbols disapear from
the generated dot config file (.config).
This patch add a new check in order to stop the test if one
of the provided symbol is missing. This must be treated as error.
For example, if a symbol disapear due to new dependency constraints.
Inspired by is_toolchain_usable() function from genrandconfig:
https://git.busybox.net/buildroot/tree/utils/genrandconfig?h=2020.02#n164
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the toolchain being used by the testsuite infra.
The new toolchain 2018.11-1 is based on gcc 8.2, uClibc-ng 1.0.30,
linux-headers 4.14 and binutils 2.31.1.
Enable BR2_TOOLCHAIN_HAS_THREADS_DEBUG that is now required.
The old toolchain 2017.05 is based on gcc 4.9, uClibc-ng 1.0.25,
linux-headers 3.10 and binutils 2.27.
Tested with gitlab
https://gitlab.com/kubu93/buildroot/pipelines/132376578
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This method asserts that the given command ran successfully.
The goal is for it to be used by the different tests when needed.
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Python 2.7 will not be maintained past 2020.
Many scripts on the tree are used during the build and should keep
Python 2 compatibility for a while.
This is not the case for the runtime test infra. It's meant to be run in
modern distros only, so it can safely switch to support Python 3 only.
An advantage of this approach is to have less scenarios to test in.
Otherwise every change to the test infra or runtime tests would need to
be tested against both versions of the interpreter, increasing the
effort of the developers, to ensure the compatibility to Python 2 was
not broken.
In order to accomplish the change to Python 3:
- change the shebang for run-tests;
- use Python 3 urllib as a drop-in replacement for Python 2 urllib2;
- when writing the downloaded binary files, explicitly open the output
file as binary;
- when subprocess is used to retrieve the text output from commands,
explicitly ask for text output. For this, use 'universal_newlines'
because 'text' was added only on Python 3.7;
- when pexpect is used to retrieve the text output from qemu or git,
explicitly ask for text output using 'encoding';
- the code using csv currently follows the example in the documentation
for the Python 2 module, change it to follow the example in the
documentation for the Python 3 module;
- fix the relative import for test_git.py to be Python 3 compliant.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Romain Naour <romain.naour@smile.fr>
Tested-by: Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently many test cases call subprocess.check_output on their own.
Factor out that code to an infra method so the call get standardized.
This will be handful when switching the test infra to use Python 3.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently run-tests must be called from the Buildroot top directory.
Derive the top directory from the script path, so run-tests can be called from
any path.
As a consequence the test infra will always test the repo it belongs to.
Suggested-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
More and more packages being tested by the test infra, e.g. syslog-ng,
need entropy at startup, usually reading from /dev/random.
Some test cases can also depend on a kernel version newer than the
builtin ones already provided by the test infra:
- 3.11.0 for armv5;
- 4.0.0 for armv7.
Add a new builtin kernel to be used by such test cases.
Add it for armv5 so most test cases that switch to use this kernel can
keep using BASIC_TOOLCHAIN_CONFIG.
Use the same kernel version and kernel config as qemu_arm_versatile plus
HW_RANDOM_VIRTIO for VirtIORNG to be usable.
Copy the actual binary file from the syslog-ng runtime test at current
master @ 29e1cb8884.
Since there is already a 'kernel-versatile' file on autobuild.buildroot.net
and we must keep it with this name for reproducibility purposes, create a
simple naming convention for newer builtin kernel images and dtb files:
kernel-<defconfig>-<kernel_series_version>
<dtb_name>-<kernel_series_version>.dtb
Pass '-device virtio-rng-pci' to qemu when this kernel is used.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Peter: use this new kernel instead of the old builtin/armv5 kernel]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default, Qemu emulates a system with 128 MB of RAM. This is not
sufficient for some test cases we have, such as TestPerlDBDmysql,
where the initramfs is quite large. Therefore, this commit extends the
RAM size emulated by Qemu to 256 MB.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/237108668
Thanks to Arnout for the analysis of the issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The git tests don't need to do a full build, they only need to do a
configure and download and/or legal-info. More tests of that type will
be added in the future. Therefore, we want to have a test base class
that doesn't automatically do a full build in the setUp().
Add this new class as a superclass of the existing BRTest class, so we
don't need to update existing tests. Only the code in run-tests that
iterates over all subclasses of BRTest has to be adapted to use
BRConfigTest instead.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some upcoming test cases can use one or more br2-external trees as
fixtures that provide packages used only in runtime tests.
Add support for br2-external into the BRTest class. Any test case can
then provide a list of paths for being used as br2-external trees
during the build of the image to test.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Daniel J. Leach <dleach@belcan.com>
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Tested-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Thomas: use named argument for make_extra_opts.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Make the builder able to call 'VAR1=1 make VAR2=2 target'.
Allow sending extra parameters to be added to the end of make command
line. Uses for these purposes:
- to configure a br2-external, using the 'BR2_EXTERNAL="dir" variable.
- to specify a make target, such as 'foo-source.'
Allow adding variables to the environment when calling make.
These added variables allow a user to override default values from BuildRoot,
such as 'BR2_DL_DIR="dl"'.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Daniel J. Leach <dleach@belcan.com>
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While integrating proxy support in builder.py, a log flush
was left in the code. This commit cleans/removes that code.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Allow builder.py to inherit the system proxy settings from
the env if they are present.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix three issues with code style in our test infra:
- 'print' is now a function,
- exceptions need to be caught-assigned with the 'as' keyword,
- old-style "%s"%() formatting is deprecated.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Thomas: drop indices in format strings.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some test cases don't use a full build as setup, so split the build()
method into configure() and build().
It allows a test case to perform configuration at the setup stage and
the build inside the test itself.
Call this new method just before build in the BRTest base class, to keep
the current behavior for existing test cases.
This change will be needed when adding a common class to test the git
download infra.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use an empty environment when calling make, but import PATH so the
buildroot tree under test can find binaries from the host machine.
Since environment variables are now ignored, move the handling of
BR2_DL_DIR to the defconfig to keep the current precedence of -d:
BR2_DL_DIR | -d DIR | test downloads | BR downloads
------------+----------+------------------+--------------
unset | unset | [error] | [error]
unset | set | in $(DIR) | in $(DIR)
set | unset | in $(BR2_DL_DIR) | in $(BR2_DL_DIR)
set | set | in $(DIR) | in $(DIR)
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With the hard disk crash of autobuild.b.o, we lost old toolchains, so
use the latest toolchains, which have been restored.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix the trivial warnings from flake8:
- remove modules imported but unused;
- use 2 lines before class or module level method;
- remove blank line at end of file.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Change all defconfig fragments to take advantage of
"cf3cd4388a support/tests: allow properly indented config fragment".
Make each defconfig fragment:
- start after a backslash;
- be declared as a multi-line string literal;
- be indented one level more than the variable that contains it.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Move the strip out of leading spaces in defconfig fragments from the
BRTest class to the Builder class. It actually postpones the strip out,
consequentially allowing test cases to post-process the defconfig in
their own __init__ before calling the __init__ method from BRTest.
Moving this code to the Builder class also allows any new test class
that inherits from BRTest to reuse the same code even if the new class
overrides the setUp method.
At same time, prepend a newline to the jlevel handling otherwise it
would stop working for defconfig fragments that don't end in a newline.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add a parameter to run-tests to act as a multiplier for all timeouts of
emulator.
It can be used to avoid sporadic failures on slow host machines as well
in elastic runners on the cloud.
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Arnout: rename multiplier to timeout_multiplier everywhere]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The default audio backend for qemu is configured at compile time. It
generates annoying warning messages to qemu's stderr when running our
tests, like these:
pulseaudio: set_sink_input_volume() failed
pulseaudio: Reason: Invalid argument
pulseaudio: set_sink_input_mute() failed
pulseaudio: Reason: Invalid argument
Explicitly set the audio backend to "none" at runtime to remove those
messages from our logs. There is no command line argument for this, so
use an environment variable when starting qemu.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As suggested by Arnout in [1].
While at it, simplify the logic by always appending the BR2_JLEVEL and
defaulting to 0 (the value copied from Config.in is used for 5 years now
and is very unlikely to change).
[1] http://patchwork.ozlabs.org/patch/790525/
Suggested-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit cf3cd4388a the -j option is
silently ignored.
The configuration lines are processed using '\n'.join().
This function adds intervening occurrences of the separator, but the
resulting string does not end at a separator.
>>> "n".join(["a","b"])
'anb'
It results in a defconfig that does not end in a newline.
When BR2_JLEVEL is added by -j logic to the defconfig it ends up
concatenated to the last line of the defconfig.
BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM=yBR2_JLEVEL=7
The resulting .config has the default BR2_JLEVEL=0.
Instead of just workaround this problem by adding a newline before
BR2_JLEVEL when -j is used, make the defconfig to end in a newline since
it is a more future-proof solution.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The defconfig is composed on-the-fly by test infra + tests.
Dump it to the logfile before running 'make olddefconfig' so it can
easily analysed when debugging.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some commands take more than 5 seconds to complete under QEMU, so add
provisions to allow individual unit-test to specify different duration
to avoid false negative test failures.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, defining a config fragment in the runtime test infra requires
that the fragment not to be indented. This is beark, and causes grievance
when looking at the code (e.g. to fix it).
Just strip out all leading spaces/tabs when writing the configuration
lines into the config file, allowing in-line indented config fragments,
like so:
class TestFoo(bla):
config = bla.config + \
"""
FOO=y
# BAR is not set
"""
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit b78b50465c, the initialisation
of BRTest.builddir was moved to the __init__ function. However, it is
set based on BRTest.outputdir and that is only set when the -o argument
is given to run-tests. When called as "run-tests -l", there is no -o
argument so BRTest.outputdir remains unset.
To fix, keep BRTest.builddir at None when BRTest.outputdir is None.
While we're at it, drop the direct access to the class member. If a
subclass wishes to set outputdir to something else before calling
BRTest.__init__, they are free to do so.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reported-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BRTest's setUp() method contains a few assignments that initialize its
member variables. Since we will want to use these in test case
overrides, move them to the __init__ function.
Also allow the config member to be overridden, rather than always
taking the class member.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When running multiple instances of emulator in parallel, the login
prompt can take some time to appear.
Use a large timeout when waiting for the prompt to avoid random
failures.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Let the user to override the default BR2_JLEVEL used for each testcase.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove unused import.
Use 2 empty lines before a class.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When using pexpect there is no need for a helper function. Just use
expect() directly everywhere.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When using pexpect there is no need for a helper function. Just use
sendline() directly everywhere.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the parameter logfile is passed to spawn(), pexpect sends both
stdin and stdout to the logfile and it creates a double echo effect.
One way to avoid the double echo in the logfile would be to disable the
echo on the terminal just after login ("stty -echo"), but double echo of
user and password would remain.
Instead of that, send only the stdout to the logfile using the
logfile_read property.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of redirecting qemu serial to telnet, redirect it to stdio.
It allows to run testcases in parallel without random failing caused by
two emulators trying to use the same telnet port (1234).
'qemu -serial stdio' returns some extra <CR> characters, so remove them
from the log.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Replace subprocess + telnetlib with pexpect.
Use the telnet installed on the host machine instead of telnetlib, while
the serial from qemu is not yet redirected to stdio.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We currently call infra.smart_open() to open log files each time we
need to write to them.
Opening the file once in the constructor of Builder and Emulator and
writing to it whenever needed is simpler and slightly more efficient.
Remove smart_open and instead create a new open_log_file() function
which just opens the logfile. Also let it compute the filename, in
order to simplify even further the Builder and Emulator code.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently messages from run-tests are quite unpleasant:
[br-tests/TestPostScripts/2017-05-09 15:51:57] Building
[br-tests/TestPostScripts/2017-05-09 15:52:23] Building done
[br-tests/TestPostScripts/2017-05-09 15:52:23] Cleaning up
.[br-tests/TestNoTimezone/2017-05-09 15:52:23] Starting
[br-tests/TestNoTimezone/2017-05-09 15:52:23] Building
[br-tests/TestNoTimezone/2017-05-09 15:53:17] Building done
[br-tests/TestNoTimezone/2017-05-09 15:53:22] Cleaning up
.[br-tests/TestGlibcNonDefaultLimitedTimezone/2017-05-09 15:53:22] Starting
[br-tests/TestGlibcNonDefaultLimitedTimezone/2017-05-09 15:53:22] Building
[br-tests/TestGlibcNonDefaultLimitedTimezone/2017-05-09 15:54:33] Building done
[br-tests/TestGlibcNonDefaultLimitedTimezone/2017-05-09 15:54:37] Cleaning up
[...]
Change them in a more readable way by removing the date and using a
columnar style:
15:12:22 TestPostScripts Starting
15:12:25 TestPostScripts Building
15:12:48 TestPostScripts Building done
15:12:48 TestPostScripts Cleaning up
.15:12:48 TestNoTimezone Starting
15:12:54 TestNoTimezone Building
15:13:44 TestNoTimezone Building done
15:13:49 TestNoTimezone Cleaning up
.15:13:49 TestGlibcNonDefaultLimitedTimezone Starting
15:14:00 TestGlibcNonDefaultLimitedTimezone Building
15:14:56 TestGlibcNonDefaultLimitedTimezone Building done
15:15:01 TestGlibcNonDefaultLimitedTimezone Cleaning up
[...]
Note the '.' and other characters presented by nose2 are still
printed. They are not affected by this change.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
