Bump QEMU defconfigs to latest longterm kernel 5.4.88.
Please note that QEMU boards not based on 5.4.y were ignored:
- qemu_csky810_virt_defconfig
- qemu_csky807_virt_defconfig
- qemu_csky610_virt_defconfig
- qemu_csky860_virt_defconfig
Tests were carried out on all QEMU boards using Gitlab [1] (commit
message was slightly different, but the patch is identical)
Additional actions needed were:
- board/qemu/sh4-r2d: Remove one of the two kernel patches [2] provided
by Alan Modra fixing rodata alignment, carried here by Romain Naour [3]
to fix an issue preventing kernel from booting with binutils 2.23.
Patch is present in upstream Linux now.
[1] https://gitlab.com/clumsyape/buildroot/-/pipelines/239483891
[2] https://www.sourceware.org/ml/binutils/2019-12/msg00112.html
[3] https://git.busybox.net/buildroot/commit/?id=a2331c8a61bdd71c47492efc818fb0458a349219
Signed-off-by: Geoffrey Le Gourriérec <geoffrey.legourrierec@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop 5.9 stable (EOL).
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
[Peter: add Config.in.legacy handling for 5.9]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we can generate reproducible archives, with all known tar
versions starting with 1.27, we don't need to clamp the host-tar
version to the old 1.29, and can now bump to any later version.
Drop the host-tar version, and use the same as the target variant.
Note that we still need the _SOURCE trick, to avoid depending on tar
to extract the tar tarball...
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Vincent Fazio <vfazio@xes-inc.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Vincent Fazio <vfazio@xes-inc.com>
So far, we checked that the tar present on the host was at most tar
1.29, because tar 1.30 changed the way it generates archives.
Having a maximum tar version requirement meant that we would eventually
always have to build our own host-tar, as distributions are updating
the version they use.
But now, we have found a way to generate reproducible archives starting
with tar 1.27 onward, so we no longer need the check for a maximum tar
version, so we can drop that requirement.
Note: this is semantically a revert of b8fa273d50 (check-host-tar.sh:
blacklist tar 1.30+), but keeping the new, mostly-linear code-path.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Vincent Fazio <vfazio@xes-inc.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Vincent Fazio <vfazio@xes-inc.com>
Like we recently did for git, switch the archives generated from
subversion to be reproducible whatever the tar version.
We have no in-tree users of the svn backend which also has hashes,
so no hash to update.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Heiko Thiery <heiko.thiery@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Vincent Fazio <vfazio@xes-inc.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Vincent Fazio <vfazio@xes-inc.com>
Commit 89f5e9893 (support/download/svn: generate reproducible svn
archives) did what it said, but can be siplified a bit.
Indeed, we are doing an svn export, so we won't have any of the .svn
directories, neither at the root of the extract, nor in any of the
sub-directories.
As such, we do not need to filter them out when we generate the list
of files to include in the archive.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Heiko Thiery <heiko.thiery@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Vincent Fazio <vfazio@xes-inc.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Vincent Fazio <vfazio@xes-inc.com>
Switch to using the tarball helper, that can generate reproducible
archives whatever the tar version >= 1.27.
However, those archives are not identical to the previous ones generated
in the (now-broken) gnu format.
To avoid any clashing between old and new archives, and new and old
Buildroot versions, we need to name the new generated archives
differently from the existing ones.
So, we bump the git-specific format-version to -br1.
The %ci date has been supported by git back to 1.6.0, released August
2008); it is not strictly ISO8601, but is still accepted as a PAX date
header. The strict ISO8601 placeholder, %cI, was only introduced with
2.2.0, release in November 2014, so too recent to be widely available.
As the format and the names of the archives changes, we need to update
all the hash files with the new names and hashes.
Of all the bootloaders that have a git download method, vexpress-firmware
is the only one to have a hash. Others have no hash files, or they have
explicitly set BR_NO_CHECK_HASH_FOR.
For the packages, linux-headers is the special snowflake, as the git
download is only for custom git tree, so it is excluded from the hash
verification with BR_NO_CHECK_HASH_FOR.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Vincent Fazio <vfazio@xes-inc.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Vincent Fazio <vfazio@xes-inc.com>
---8<------8<------8<------8<---
#!/bin/sh
# Find and download all packages using git as backend.
# Manually fix hashes for affected packages.
# Packages that only have a host variant
HOST_ONLY='imx-mkimage|mxsldr|netsurf-buildsystem|opkg-utils|prelink-cross|qoriq-rcw|vboot-utils'
# Packages that have a non-git main _SOURCE, and/or which
# have BR_NO_CHECK_HASH_FOR for the git _SOURCE
NOT_GIT='aufs|aufs-util|xenomai|linux-headers'
export BR2_DL_DIR=$(pwd)/temp-dl-dir
make defconfig
make $( git grep -l -E 'SITE_METHOD[[:space:]]*:?=[[:space:]]*git\>|_SITE[[:space:]]*:?=[[:space:]]*git:' \
boot/vexpress-firmware/ package/ \
|sed -r -e 's,.*/([^/]+)\.mk,\1,' \
|sed -r -e '/^('"${NOT_GIT}"')$/d;' \
-e 's/^('"${HOST_ONLY}"')/host-\1/;' \
-e 's/$/-legal-info/;'
)
---8<------8<------8<------8<---
We currently need to generate reproducible archives in at least two
locations: the git and svn download backends. We also know of some
future potential use (e.g. the other download backends, like cvs, or
in the upcoming download post-processors for vendoring, like cargo
and go).
However, we are currently limited to a narrow range of tar versions
that we support, to create reproducible archives, because the gnu
format we use has changed with tar 1.30.
As a consequence, and as time advances, more and more distros are,
or will eventually start, shipping with tar 1.30 or later, and thus
we need to always build our on host-tar.
Now, thanks to some grunt work by Vincent, we have a set of options
that we can pass tar, to generate reproducible archives back from
tar-1.27 and up through tar-1.32, the latest released version.
However, those options are non-trivial, so we do not want to have
to repeat those (and maintain them) in multiple locations.
Introduce a helper that can generate a reproducible archive from
an input directory.
The --pax-option, to set specific PAX headers, does not accept
RFC2822 timestamps which value are too away from some fixed point
(set atcompile-time?):
tar: Time stamp is out of allowed range
However, the same timestamps passed as strict compliant ISO 8601 are
accepted, so that's what we expect as a date format.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Vincent Fazio <vfazio@xes-inc.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Vincent Fazio <vfazio@xes-inc.com>
---8<------8<------8<------8<---
# Here is a Makefile used to test all the versions of tar, with
# different output formats and different sets of options:
# Versions prior to 1.27 do not build on recent machines, because
# 'gets()' got removed (rightfully so), so don't count them as
# candidates.
VERSIONS = 1.27 1.27.1 1.28 1.29 1.30 1.31 1.32
DATE = Thu 21 May 2020 06:44:11 PM CEST
TARS = \
$(patsubst %,test_gnu_%.tar,$(VERSIONS)) \
$(patsubst %,test_posix_%.tar,$(VERSIONS)) \
$(patsubst %,test_posix_paxoption_%.tar,$(VERSIONS))
all: $(TARS)
sha1sum $(^)
.INTERMEDIATE: test_%.tar
test_gnu_%.tar: tar.% list
./$(<) cf - -C test \
--transform="s#^\./#test-version/#" \
--numeric-owner --owner=0 --group=0 \
--mtime="$(DATE)" \
--format=gnu \
-T list \
>$(@)
test_posix_%.tar: tar.% list
./$(<) cf - -C test \
--transform="s#^\./#test-version/#" \
--numeric-owner --owner=0 --group=0 \
--mtime="$(DATE)" \
--format=posix \
-T list \
>$(@)
test_posix_paxoption_%.tar: tar.% list
./$(<) cf - -C test \
--transform="s#^\./#test-version/#" \
--numeric-owner --owner=0 --group=0 \
--mtime="$(DATE)" \
--format=posix \
--pax-option='delete=atime,delete=ctime,delete=mtime' \
--pax-option='exthdr.name=%d/PaxHeaders/%f,exthdr.mtime={$(DATE)}' \
-T list \
>$(@)
list: .FORCE
list: test
(cd test && find . -not -type d ) |LC_ALL=C sort >$(@)
LONG = L$$(for i in $$(seq 1 200); do printf 'o'; done)ng
test: .FORCE
test:
rm -rf test
mkdir -p test/bar
echo foo >test/Foo
echo bar >test/bar/Bar
ln -s bar/Bar test/buz
echo long >test/Very-$(LONG)-filename
ln test/Very-$(LONG)-filename \
test/short
.PRECIOUS: tar.%
tar.%: tar-%
cd $(<) && ./configure
$(MAKE) -C $(<)
install -m 0755 $(<)/src/tar $(@)
.PRECIOUS: tar-%
tar-%: tar-%.tar.gz
tar xzf $(<)
.PRECIOUS: tar-%.tar.gz
tar-%.tar.gz:
wget "https://ftp.gnu.org/gnu/tar/$(@)"
.FORCE:
clean:
rm -rf tar-* tar.* test_* test list
---8<------8<------8<------8<---
When we want to change the format of an archive we generate (e.g. those
we generate from git trees), the hashes of those archives will change.
To avoid any issue (e.g. an older Buildroot using newer archives, or the
other way around) that would conclude that the hashes do not match, we
want to change the filenames of the generated archives whenever we
change their format.
Introduce a new internal variable, specific to each site method, that we
can set to include a "format version" for the archives generated from
that site method.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Vincent Fazio <vfazio@xes-inc.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Vincent Fazio <vfazio@xes-inc.com>
The .tar.gz default extension is historical, and we initially used
to only fetch tarballs from remote sites.
When we introduced downloads from VCS repositories, we kept that
extension, and kept compressing with gz, by lack of good reason to
switch to some other compression scheme.
However, nowadays, we will want to change the way we construct the
tarballs we generate from VCS. This will de facto change the hashes
of those tarballs.
So we will want that the archives we generate do not clash with the
existing ones, so we need another filename. Thus, we need a way to
be able to use a different extension when we generate archives from
VCS.
Use a macro as suggested by Arnout.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Vincent Fazio <vfazio@xes-inc.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Vincent Fazio <vfazio@xes-inc.com>
The LLVM project has switched to using a monorepo to host all their
components. The separate, individual repositories have been closed
late 2020 / early 2021. The libclc repository is no longer.
Switch to using the libclc source from the llvm legacy and frozen
mirror.
Even though we could switch over to using the github helper, we just
keep using the git download method: it is a small repository, and it
will not impact people that were already using it.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Valentin Korenblit <valentinkorenblit@gmail.com>
Cc: Michael Opdenacker <michael.opdenacker@bootlin.com>
Acked-by: Romain Naour <romain.naour@gmail.com>
---
Changes v1 -> v2:
- keep everything as-is, just switch to the frozen mirror
The following commits:
- 7868289fd5 package/zic: bump version to 2020f
- c99374ecbb package/tzdata: bump version to 2020f
bumped the tzdata from version 2020a to 2020f. However, in 2020b, the
zic option '-y' was removed, and so was the yearistype.sh script [0].
This now spews annoying warnings:
warning: -y ignored
Fortunately, it still consumes its argument, so the missing yearistype.sh
is simply ignored.
Drop that option.
[0] https://mm.icann.org/pipermail/tz-announce/2020-October/000059.html
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
As stated in README.md, multipath-tools is covered by several licenses
and LGPL-2.0 is "just" the default license:
- GPL-2.0+ (e.g. libmultipath/alias.c)
- GPL-3.0+ (e.g. libdmmp/libdmmp.c)
- LGPL-2.1+ (e.g. libmpathcmd/mpath_cmd.c)
So replace COPYING (which is a symlink to LICENSES/LGPL-2.0) by the
approriate license files in LICENSES directory
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: further split long lines]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yair Ben-Avraham <yairba@protonmail.com>
[yann.morin.1998@free.fr:
- correctly fix build without lzma in an upstreamable fashion
- actually fix the build without udev
- depend on udev, not libudev (which does not exist)
- don't use += for the first variable assignment to _CONF_OPTS
- explicitly disable unsupported fuzz options
- add explicit optiopnal support for bash-completion
- drop useless comments about "features" and "booleans"
- fix alphabetical order in DEVELOPERS
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes the following security issues:
- CVE-2020-8265: use-after-free in TLSWrap (High) Affected Node.js versions
are vulnerable to a use-after-free bug in its TLS implementation. When
writing to a TLS enabled socket, node::StreamBase::Write calls
node::TLSWrap::DoWrite with a freshly allocated WriteWrap object as first
argument. If the DoWrite method does not return an error, this object is
passed back to the caller as part of a StreamWriteResult structure. This
may be exploited to corrupt memory leading to a Denial of Service or
potentially other exploits
- CVE-2020-8287: HTTP Request Smuggling in nodejs Affected versions of
Node.js allow two copies of a header field in a http request. For
example, two Transfer-Encoding header fields. In this case Node.js
identifies the first header field and ignores the second. This can lead
to HTTP Request Smuggling
- CVE-2020-1971: OpenSSL - EDIPARTYNAME NULL pointer de-reference (High)
This is a vulnerability in OpenSSL which may be exploited through Node.js.
You can read more about it in
https://www.openssl.org/news/secadv/20201208.txt
Update the license hash for the addition of the (MIT licensed)
cjs-module-lexer module:
9eb1fa1924
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Use ENABLE_GLIB which is available since version 0.60 and
766a32ff59
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In libIEC61850 before version 1.4.3, when a message with COTP message
length field with value < 4 is received an integer underflow will happen
leading to heap buffer overflow. This can cause an application crash or
on some platforms even the execution of remote code. If your application
is used in open networks or there are untrusted nodes in the network it
is highly recommend to apply the patch. This was patched with commit
033ab5b. Users of version 1.4.x should upgrade to version 1.4.3 when
available. As a workaround changes of commit 033ab5b can be applied to
older versions.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Frotz is an interpreter for old Infocom adventures and other Z-code
games.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes build error
output/host/opt/ext-toolchain/bin/../lib/gcc/aarch64-amd-linux-gnu/4.9.1/../../../../aarch64-amd-linux-gnu/bin/ld:
cannot find -latomic
using this defconfig
BR2_aarch64=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_AARCH64=y
BR2_PACKAGE_OPENSSL=y
libopenssl is only used here as an example: all packages adding -latomic
if BR2_TOOLCHAIN_HAS_LIBATOMIC=y are broken, like dav1d, ffmpeg, gnutls,
kodi and vlc.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
XorCurses is a remake of the 8-bit game 'Xor' by Astral Software.
Your task is to roam around a series of mazes where you have to
collect all blue masks before finding the exit. You have two 'shields'
(players) and you can use either one at any time and switch between
them. While the first level is simply a matter of navigation, the
following levels introduce further objects like bombs and teleports,
which have to be used right to solve the puzzles.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Switch to upstream ATF of recent version to fix build with recently
updated mv-ddr. The vendor does not provide public access to newer ATF
versions anymore.
Bump U-Boot and kernel to fix dtc build on hosts with gcc 10.
Increase rootfs size. The default 60MB is not enough.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/948622614
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The CPE type of the Linux kernel is special, it should be "o", unlike
all other packages that use "a". We therefore need to override
<pkg>_CPE_ID_PREFIX, so that the CPE ID of the linux package matches
with the CPE dictionary.
Reported-by: Matt Weber <matthew.weber@rockwellcollins.com>
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>