Allow to generate 'u-boot.nand', Freescale i.MX28 BootStream format (.sb)
with a header for booting from NAND flash.
There are two possibilities when preparing an image writable to NAND flash:
1) The NAND was not written at all yet or the BCB (Boot Control Blocks) is
broken. In this case, the NAND image 'u-boot.nand' needs to written.
2) The NAND flash was already written with a good BCB. This applies after
'u-boot.nand' was correctly written. There is no need to write the BCB
again. In this case, the bootloader can be upgraded by writing 'u-boot.sb'.
To satisfy both cases 'u-boot.nand' as well as the make target 'u-boot.sb' are
copied to the binaries directory.
mxsboot for NAND images needs all three parameters typed in as integer values
(hex values do not work). The default values choosen are typical sizes for a
NAND flash.
For more information see:
http://www.denx-cs.de/doku/?q=m28evkrunuboot
Commit Note: This patch is based on top of
"[PATCH v2 1/2] boot/uboot: add support for i.MX28 SD format"
http://patchwork.ozlabs.org/patch/453116/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds the option to download at91bootstrap3 from
a custom git URL. This is a requirement for all that boards
that use a custom at91bootstrap3 version.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch bumps at91bootstrap3 version to 3.7.2
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds licensing informations to at91bootstrap3
[Thomas:
- change from "BSD-2c with endorsement clause" to "Atmel License",
because the license of AT91Bootstrap is neither a BSD-2c nor a
BSD-3c: it does not carry the second clause of the BSD-2c or BSD-3c
licenses giving the condition of redistribution of the binary form.]
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to support ISO9660 bootable images that rely on Grub 2, this
commit modifies thr Grub 2 makefile to generate and install an El
Torito image. Such an image is simply produced by concatenating the
cdboot.img provided by Grub 2, and the Grub 2 image generated by
Buildroot using grub-mkimage.
Since this action is so simple and cost-free, we don't bother adding a
Grub 2 sub-option for that, and simply generate the El Torito image
unconditionally.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
It's been deprecated since the 2014.05 release, so a year has passed.
Add legacy info as well to raise a warning when it's used.
[Peter: Remove entire config.h fixup handling]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As we recently did for U-Boot, disable checking hashes for custom
versions of barebox.
Note that we currently have no hash file for barebox, but avoiding the
check will already be in place when we do add it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For custom tarballs, it's quite obvious we can not check hashes.
For custom versions, that's not so obvious. One might think we could
have hashes for all the official releases, but that's not possible: if
the user uses a released version of Buildroot (say 2015.05) much later
in the future, and wants to use the then-released 2038.02 U-Boot. It now
seems pretty obvious that Buildroot 2015.02 can't know the hash for
U-Boot 2038.02.
So, disable checking the hash for custom tarballs and custom versions.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Vincent Stehle <vincent.stehle@laposte.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The git:// protocol may not go through conservative corporate firewalls.
Use http, that goes out through about anything.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of manually testing MAKECMDGOALS, use the newly introduced
BR_BUILDING variable to know if we're building or not.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Users should use BR2_TARGET_UBOOT_PATCH instead.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The existing u-boot patch option only allowed directories to be
specified. This adds support for URLs using similar code as found
in linux/linux.mk. Local files are also handled now.
This change is useful for Intel Edison support, so that Intel's u-boot
patch can be downloaded rather than stored in the Buildroot source tree.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix issues noticed by Arnout:
- Rewrap the linux/Config.in paragraph
- Revert the "is a toolchain dependency" -> "has a toolchain
dependency" change from pkg-generic.mk, as the original was
correct.]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For some (silly?) reason, the kconfig-package infra always wants
<pkg>_KCONFIG_FILE to be defined. So let's do like barebox does: use a
temporary AT91BOOTSTRAP3_SOURCE_CONFIG variable, and assign it to
AT91BOOTSTRAP3_KCONFIG_FILE. This way, the latter is always defined,
even if to the empty value.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In at91bootstrap3, defconfig files are spread out in various
sub-directories, so we can't easily construct the path to those
defconfig files.
As it turns out, there are no two defconfig files named the same; they
all contain at least the board name, plus some extra info. And there is
always only one directory depth below board/ where all defconfig files
are to be found.
Also, at91bootstrap3's own Makefile relies on this single-match as it
runs a 'find' command to locate the defconfig file.
So, even though we do not know the path to the defconfig file, we can
construct a shell-glob quite easily (in the hope that there will never
be more than one directory depth).
Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
[yann.morin.1998@free.fr:
- remove custom _CONFIGURE_CMDS, handled by pkg-kconfig (Thomas)
- remove redundant intermediate variable
- fix using internal defconfig files
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Several packages have some logic to apply custom patches that existed
before the BR2_GLOBAL_PATCH_DIR mechanism: at91bootstrap,
at91bootstrap3, barebox, uboot and linux. Currently, the logic of
those packages to apply custom patches is to match
<package-name>-*.patch, which is not consistent with what we've done
for patches stored in the package directory, and for patches stored in
BR2_GLOBAL_PATCH_DIR: in such cases, we simply apply *.patch.
Therefore, for consistency reasons, this commit changes these packages
to also apply *.patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Allow to generate u-boot.sd, Freescale i.MX28 SB format with a header for
booting from an SD card.
U-boot includes an mxsboot tool to generate this format, starting from
v2011.12.
See u-boot doc/README.mxs (or doc/README.mx28_common before 2013.07).
[Arnout:
- Wrap Config.in help text at 72 columns.
- Remove v from U-Boot version specifier.
- Refer to different README name before 2013.07.
- Depend on host-elftosb
- Add comment to clarify sb -> sd conversion.]
Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Tested-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop the buildroot toolchain non-largefile support option since it's
being removed.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit doesn't touch infra packages.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since 6.03 syslinux release, the gnu-efi sources are bundled whith
syslinux. We need to force the build system to use the Buildroot's
gnu-efi package.
Remove the patch for find-gnu-efi.sh script which was removed, as well
as the SYSROOT variable from the BUILD_CMDS, which is no longer
needed.
There are still some parallel build issues, so MAKE1 can't
be removed for now.
Add a hash file.
Fix indentation.
[Thomas: fix minor typos in a new comment in the .mk file.]
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Barebox uses KERNEL_ARCH to derive BAREBOX_ARCH, but doesn't
currently handle the case of the x86-64 architecture. In this
case KERNEL_ARCH is x86_64, but BAREBOX_ARCH should be x86
nonetheless.
Signed-off-by: Fabien Lahoudere <fabienlahoudere.pro@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- use $(BAREBOX_DIR) instead of $(@D) when defining
BAREBOX_SOURCE_CONFIG, because $(@D) has no value at this point
since we're outside of a make rule. This was causing Barebox to be
constantly rebuilt, since the defconfig path was not a full path,
it was looking like: '/arch/arm/configs/tegra_v7_defconfig'. The
solution of using $(BAREBOX_DIR) has been used to mimic was is done
in the linux package, which uses $(LINUX_DIR).]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: "Yann E. Morin" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Even though this is not strictly necessary with the current version
of barebox.mk, it becomes necessary when migrating barebox.mk to the
kconfig infrastructure.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: "Yann E. Morin" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When x86-64-efi platform is selected, grub2 automatically adds -m64 to the
CFLAGS. This makes the configure script failed when the toolchain does not
have multilib support (like the Buildroot ones).
Reported-by: Noe Rubinstein <nrubinstein@aldebaran-robotics.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Though U-Boot introduced a Kconfig and Kbuild build system with version
2014.10 the old build commands with <board>_config are still supported.
Tested with BR2_TARGET_UBOOT_BOARDNAME="m28evk"
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This flag seems to be obsolete. There is no piece of code in the U-Boot source
tree referencing CONFIG_NOSOFTFLOAT.
Unfortunatly the use of this flag is not documented here. Maybe it's about this
old workaround:
http://lists.denx.de/pipermail/u-boot/2007-March/020282.html
However, this patch has been declined:
http://www.denx.de/wiki/view/U-Boot/PatchStatus?rev=1.27
Since no other configure options are used, remove also UBOOT_CONFIGURE_OPTS.
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the quotes from the BR2_TARGET_UBOOT_SPL_NAME variable.
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Point out that the SPL name is an image name.
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building an SPL image depends on the board configuration. This option
does not enable the SPL build, but only copies the built SPL image to
the binary images folder. The current help text is misleading.
Signed-off-by: Jörg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Change to use the _defconfig targets of at91bootstrap3 build system
when a defconfig is used.
[Thomas: adjust to make a better use of at91bootstrap3 defconfig
mechanism.]
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This way we don't depend on the permissions of files under boot/grub/,
which aren't tracked.
While we're at it, change all 'cp' usages into 'install' with the
correct mode for each file.
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add and use the "UNZIP" variable instead of calling directly unzip
because the variable contains the "-q" option to silence "unzip" so it
doesn't show the list of files extracted just like when tar files are
being unpacked.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>