BR2_PACKAGE_GST_PLUGINS_UGL1_PLUGIN_XINGMUX needs to be
BR2_PACKAGE_GST1_PLUGINS_UGLY_PLUGIN_XINGMUX
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since version 1.70.0, boost installs its own cmake files which are
utterly broken so don't install them otherwise all cmake packages using
boost (host-thrift, domoticz, i2pd ...) will fail because
BOOST_INCLUDE_DIRS will be empty
Fixes:
- http://autobuild.buildroot.org/results/4ada26bab5c1e6504c7d8c92672326ced1d336df
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
After fixing Prefix in our custom qt.conf, Qt computes and embeds the
correct sysroot prefixed pathes in all *.la and *.prl files.
So remove fixup of
- *.la files because they are generically fixed anyway
- *.prl files because occurences of absolute /usr/lib were no longer
observed
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When querying the qmake properties with our custom qt.conf present, I
noticed that they were different from the built-in ones (without
qt.conf). Most notably QT_INSTALL_PREFIX was a concatenated string of
two absolute paths (hostdir + sysroot).
This is due to Prefix being set to our HOST_DIR and HostPrefix not being
set at all. Supposedly this was also the root cause of the initial
problem with qt.conf.in, because once Prefix and HostPrefix are set to
their correct values, re-setting all the other paths to their defaults
is no longer necessary. (However, since our paths for Headers, Plugins
and Examples are non-default, they still have to be explicitely set.)
There is one exception to this: omitting 'Settings' leads to the
CONFIGURATION path being plain /usr, whereas the default without qt.conf
is /usr/etc/xdg. But even if storing configs directly under /usr seems a
bit strange we keep it that way, because our qt.conf did set it to /usr
before and we don't want to break existing users.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The readme.txt would contain similar content for either processor
family, so this patch consolidates the usage and adds the new
T2080 notes.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The board is setup to track upstream Linux as the official
vendor support was complete(depricated) at 4.1 via NXP SDKs.
The target does not build uboot and assumes the user still uses the NXP
suggested prebuilts in the SDK2.0 (last release for PowerPC). If a
uboot is required, the source for SDK2.0 can be found in the following
repo.
http://git.freescale.com/git/cgit.cgi/ppc/sdk/u-boot.git/tag/?id=fsl-sdk-v2.0-1703
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Arnout: update .gitlab-ci.yml]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
MKINSTALLDIRS is not automatically called by autotools when
autoreconfigured.
This leads to the following error during install:
`/bin/sh @MKINSTALLDIRS@ /home/dawncrow/buildroot-test/scripts/instance-0/output/target/usr/share
/bin/sh: 0: Can't open @MKINSTALLDIRS@`
because @MKINSTALLDIRS@ doesn't get substituted during autoreconf.
This particular command only gets invoked when NLS is enabled.
Add patch that explicitly calls AM_MKINSTALLDIRS macro to substitute
every @MKINSTALLDIRS@ occurence in *.in Makefile.
Patch is not sent upstream since upstream is dead.
Fixes:
http://autobuild.buildroot.net/results/744/7447c03426556f787f20f7ab2d36f0cacc4af1bd/
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch is not needed since version 1.0.25 and
8434ea9162
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Zero variant won't build with the server or client also selected at the same
time, and expressing this in the Config.in would be too complicated to do.
Even so, selecting multiple variants doesn't seem to be that important in the
context of Buildroot.
This patch removes the ability to select multiple variants in favor
of just selecting one. The default is server as that is what all of the major
distributions currently use as the default as well.
Fixes:
http://autobuild.buildroot.net/results/a45cfa9b3602fd05f6adbf070a1bad6510975c36
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add Andes 32-bit defconfig for AE3XX platform.
Signed-off-by: Che-Wei Chuang <cnoize@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Nylon Chen <nylon7@andestech.com>
[Thomas:
- fix commit title to match the defconfig name
- use the external toolchain package]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds a new package for the Andes external toolchain for
the nds32 Little Endian architecture.
https://github.com/vincentzwc/prebuilt-nds32-toolchain/releases/download/20180521/nds32le-linux-glibc-v3-upstream.tar.gz
Signed-off-by: Che-Wei Chuang <cnoize@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Nylon Chen <nylon7@andestech.com>
[Thomas:
- rename .mk and .hash files to carry the proper package name
- fix <pkg>_SITE variable, which was incorrect
- add prompt in Config.in
- add missing include of Config.in in toolchain/toolchain-external/Config.in
- add missing selects for RPC and SSP, since the toolchain supports
both
- drop BR2_TOOLCHAIN_EXTERNAL_URL option, the toolchain URL is
provided by the .mk file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit provides basic support for the Andes 32-bit (nds32)
architecture.
Signed-off-by: Che-Wei Chuang <cnoize@andestech.com>
Signed-off-by: Greentime Hu <greentime@andestech.com>
Signed-off-by: Nylon Chen <nylon7@andestech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The go toolchain can cross-compile by default. So most of the time,
building a toolchain that supports a target, allows us to also build go
binaries for the host. This is how support for host go packages was
added: we use the same toolchain that was initially built only for
target.
But we might want to build a go binary for the host, when compiling a
target for which go isn't supported. Then, building host-go will fail:
by default, we build go for a specific target, and give the toolchain
bootstrap scripts the cross compiler we'll use.
This change modifies this behaviour: we only assume the go toolchain is
cross-capable if we know the current target is supported. Otherwise this
is a simple host go tool. We don't need to set any of the options needed
for cross-compilation in that case.
Thus, only set all the target-specific go options under a condition that
the target arch is supported. The only option we still set is
HOST_GO_CGO_ENABLED, and we always set it to enabled.
It was also considered to create a separate package to build the
go-for-host compiler which would be used for host-go-packages, but that
would lead to a lot of duplication and is completely unnecessary.
Fixes:
http://autobuild.buildroot.net/results/98b9c7aaff2af4d19adfedac00b768d92530ce94http://autobuild.buildroot.net/results/bed228995ce3778720f991df9b41345a7c724a46http://autobuild.buildroot.net/results/3b3ea148165b96513ea511ee0d4adb334a6afac8
Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The commit 197b5f9d1c ("package/binutils: fix loops relaxation in
xtensa gas") changed the way loop opcodes are relaxed resulting in build
failures in hand-made assembly code that has loops in sections without
.literal_position pseudo op or equivalent construct. This e.g. breaks
xtensa linux kernel build.
Fix that by adding literal position to the beginning of every section.
Fixes: 197b5f9d1c ("package/binutils: fix loops relaxation in xtensa
gas")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Add hash for license file
- Enable parallel build: it has been fixed since version 1.19b and
70a2ea926e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: explain why ENABLE_STATIC=OFF is the right thing]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update hash of license file:
- update in year
- add arc4random.c, arc4random_uniform.c and getentropy.c license (ISC)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds ac_cv_have_pcre2_jit cache variable to avoid
the tests running on the host system during cross-compiling.
Signed-off-by: Artem Panfilov <panfilov.artyom@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
the license file hash changed due to a copyright year update
-LuaSec 0.7 license
-Copyright (C) 2006-2018 Bruno Silvestre, UFG
+LuaSec 0.8 license
+Copyright (C) 2006-2019 Bruno Silvestre, UFG
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issues:
- CVE-2019-8320: Delete directory using symlink when decompressing tar
- CVE-2019-8321: Escape sequence injection vulnerability in verbose
- CVE-2019-8322: Escape sequence injection vulnerability in gem owner
- CVE-2019-8323: Escape sequence injection vulnerability in API response handling
- CVE-2019-8324: Installing a malicious gem may lead to arbitrary code execution
- CVE-2019-8325: Escape sequence injection vulnerability in errors
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes a number of issues discovered post-2.1.2. For details, see:
https://github.com/tpm2-software/tpm2-tss/releases/tag/2.1.3
Drop 002-configure.ac-switch-default-ESAPI-crypto-backend-to-.patch as this
issue is now fixed upstream.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The license file hash has been modified due to copyright year updates:
- * Copyright (C) 2002-2018 Igor Sysoev
- * Copyright (C) 2011-2018 Nginx, Inc.
+ * Copyright (C) 2002-2019 Igor Sysoev
+ * Copyright (C) 2011-2019 Nginx, Inc.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now based on 4.19.23 (from 4.14.98) and bump linux header
version accordingly and needs host openssl.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This moves the BR2_PACKAGE_LINUX_FIRMWARE_TI_CC2560 option to the
Bluetooth section of the config file. This chip is Bluetooth-only, so
it belongs there instead of with the Wi-Fi/Bluetooth combo chips.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Louis-Paul Cordier <lpdev@cordier.org>
[Thomas:
- add missing Config.in comment
- add missing select BR2_PACKAGE_LIBDRM_INTEL, needed as the code
uses a header file installed only when libdrm-intel is enabled
- add patch to drop -fstack-protector in order to support toolchains
without SSP support]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Louis-Paul Cordier <lpdev@cordier.org>
[Thomas:
- add missing Config.in comments
- fix minor nit in the _LICENSE variable
- add patch to drop hardening options, especially -fstack-protector,
which was causing the build to fail on toolchains without SSP
support]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
