According to hostapd's defconfig file, ACS is currently only supported
through the nl80211 driver. Search through the source code also confirms
that ACS machinery is present in the nl80211 driver only.
Although hostapd can be built with ACS enabled and nl80211 disabled, an
attempt to use ACS with other drivers by setting a wireless channel to 0
results in a runtime failure (driver doesn't accept this value). So we
might save a user from selecting a meaningless combination by making ACS
dependent on nl80211.
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
Reviewed-by: Sam Voss <sam.voss@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for the wired driver. Add configuration options to select
which drivers to build. Select DRIVER_NONE if no other drivers enabled
(this may be the case when building hostapd as a standalone RADIUS
server).
Update makefile logic and apply wireless-specific options only if at
least one wireless driver enabled. Otherwise, an attempt to build a
wired-only or RADIUS-only hostapd will fail.
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
Reviewed-by: Sam Voss <sam.voss@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Ntp builds fine with current libressl 2.7.2.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Opusfile builds fine with current libressl 2.7.2.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Libevent builds fine with current libressl 2.7.2.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Ffmpeg builds fine with current libressl 2.7.2.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now we keep the git clone that we download and generates our tarball
from there.
The main goal here is that if you change the version of a package (say
Linux), instead of cloning all over again, you will simply 'git fetch'
from the repo the missing objects, then generates the tarball again.
This should speed the 'source' part of the build significantly.
The drawback is that the DL_DIR will grow much larger; but time is more
important than disk space nowadays.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For existing setups, the global donload directory may have a lot of the
required archives, so look into there before attempting a download.
We simply hard-link them if found there and not in the new per-package
loaction. Then we resume the existing procedure (which means the new
hardlink will get removed if it happened to not match the hash).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The infrastructure needs to give the 'dl_dir' to the dl-wrapper which in its
turn needs to give it to the helper. It will only be used by the 'git'
helper as of now.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In order to introduce the cache mechanisms, we need to have a lock on the
$(LIBFOO_DL_DIR), otherwise it would be impossible to do parallel download
(a shared DL_DIR for two buildroot instances) without risking conflicts.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Theses packages are given as an example of the use of the *_DL_SUBDIR feature.
There maybe other packages that would benefit from that feature, they
would need to be added on a case by case basis.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since we introduced subdirectories to the DL_DIR, we need to support them
in the PRIMARY and BACKUP mirrors as they evolve to the new tree
structure.
We check first the new URI (with the subdir), and in case of failure, we
check without. By checking both URIs, we ensure that old mirror are usable.
Also, add a missing qstrip call for BR2_BACKUP_SITE.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This per package variable can be used to specify the download
subdirectory used by that package.
The use case here is for example linux-headers and linux, which share
the same sources (because they are the same upstream project), so we
don't want to download twice the kernel, nor store it multiple times
either.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With all the previous changes, we are now ready to add a subdirectory to
the DL_DIR.
The structure will now be DL_DIR/PKG_NAME/{FILE1,FILE2}
This is needed for multiple reasons:
- Avoid patches with name like SHA1.patch laying flat in DL_DIR,
which makes it hard to know to which packages they apply
- Avoid possible collisions if two releases have the same name
(e.g: v01.tar)
- Allow the possibility to handle a git cache per package in the
newly created subdirectory.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Openldap builds fine with current libressl 2.7.2.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Switch to Linux kernel version 4.9.59 from the TI SDK 04.02.00.09
(TI SDK release date: 23.12.2017)
Updated uboot to version 2018.01
uEnv.txt corrected to boot from sd card on the ti-am335x-evm
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The tarball filename has changed since 5.10. The module suffix
*opensource-src* has changed to *everywhere-src*. I introduced the
*QT5_SOURCE_TARBALL_PREFIX* variable to set the right filename according
to the Qt version.
qtwebengine:
Select libnss. It is a requirement[1] because OpenSSL
certificate validation[2] and NSS bundle[3] was dropped.
Add host-libnss and host-libpng to satisfy new requirement to
build an internal host-tool.
Set ninja host pkg-config tool using environment variable
$GN_PKG_CONFIG_HOST[4]. The build system uses pkg-config to get
package data for both host and target architectures. Using the
same call to pkg-config for both target and host leads to build
mismatches: it tries to link a host-tool using target libraries.
qt5base:
sqlite plugin now uses sqlite3_column_table_name16() so select
BR2_PACKAGE_SQLITE_ENABLE_COLUMN_METADATA to make sure it is
available.
qt5multimedia:
libqgsttools was renamed to libQtMultimediaGstTools. The latter
name matches the libQt5Multimedia*.so.* pattern so no additional
copy command is needed for it anymore.
qt5xmlpatterns:
Names of the license files have changed: LICENSE.(L)GPLv3 ->
LICENSE.(L)GPL3. The new files in fact already existed in 5.9.4
but the old ones were not removed yet. The new files are
slightly different: there used to be a Qt header in front of it
which is now removed. Also LICENSE.LGPL3 is rewrapped.
qt5location, qt5quickcontrols, qt5serialport:
Same license files issue, and for LICENSE.GPLv2 as well.
LICENSE.GPL2 has the "How to Apply These Terms to Your New
Programs" text appended to it.
qt5script:
Similar license file issues, but the new license files were not
present yet. LICENSE.GPLv21 was removed so there is no longer a
license file for the LGPL-2.1-covered Qt code.
[1]: 9b449045fb
[2]: https://codereview.chromium.org/2862543003
[3]: https://codereview.chromium.org/1882433002
[4]: https://github.com/qt/qtwebengine/blob/v5.10.1/src/core/config/linux.pri#L111-L125
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
[Peter:
- fix sqlite plugin support in qt5base;
- fix target installation of qt5multimedia
]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[Arnout:
- create a local host-pkg-config tool instead of extending pkgconf;
- pass the same options to host-pkg-config as we do for other packages;
- carry the EGL mesa3d X11 headers patch;
- update license file names and hashes
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The license information in qt5script was just copied from all the other
qt5 modules, but it is different (and complicated).
- libQt5Script itself contains the third-party JavaScriptCore source.
JavaScriptCore has a number of licenses: BSD-2-Clause, BSD-3-Clause,
LGPL-2.0+, LGPL-2.1+. Since it is all linked together, the end
result will be BSD-3-Clause and LGPL-2.1+.
The different BSD licenses are all slightly different (different
authors, which affects the third clause in particular). Only one
separate license file is provided, so let's use that one.
There is an LGPL-2.0 license file, which is slightly different from
the top-level LICENSE.LGPLv21, so let's add that one as well.
- libQt5Script also contains Qt-specific code which is all licensed
under LGPL-2.1 only. This is covered by the LICENSE.LGPLv21 file.
It merges with the LGPL-2.1+ from JavaScriptCore but limits it to
2.1 only.
- libQt5ScriptTools is a separate libary containing just the script
debugger. It is covered by the usual Qt license:
* LGPL-2.1 or LGPL-3.0 with exception for Qt 5.6;
* LGPL-3.0 or GPL-2.0+ for Qt 5.9 (actually it is GPL-2.0 or GPL-3.0
or any later version approved by the KDE Qt foundation, but let's
keep it simple :-). Note that there is no LICENSE.GPLv2 provided,
only LICENSE.GPLv3. Also, there is an LGPL_EXCEPTION.txt file but
no mention of an exception anywhere in the sources.
Update the license information with all of the above. Also add hashes
for the new license files from JavaScriptCore.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
At the moment, it means that we make sure that BR2_DL_DIR is created, in
the future, it will make sure that BR2_DL_DIR/PKG_NAME/ is created.
[Peter: drop trailing / on mkdir]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Let the infrastructure use the already existing variable $(PKG)_DL_DIR
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Instead of DL_DIR, the package should now use $(PKG)_DL_DIR to ease the
transition into a new directory structure for DL_DIR.
This commit has been generated with the following scripts:
for i in $(find . -iname "*.mk"); do
if ! grep -q "\$(DL_DIR)" ${i}; then
continue
fi
pkg_name="$(basename $(dirname ${i}))"
[ "${pkg_name}" = "package" ] && continue
raw_pkg_name=$(echo ${pkg_name} | tr [a-z] [A-Z] | tr '-' '_')
pkg_dl_dir="${raw_pkg_name}_DL_DIR"
sed -i "s/\$(DL_DIR)/\$($pkg_dl_dir)/" ${i}
done
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some arguments can be empty, so we need to add single quote around them
But since they are sinple quote; double quote inside them are now not
interpreted by the shell and as such must be removed; hence the use of
qstrip.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The forthcoming "libvirt" package will need a "nc" command with support
for Unix domain sockets in order to permit remote management using the
virt-manager utility. netcat-openbsd provides such command but requires
glibc, so we would not have remote management on uClibc-based systems.
Ncat is a much-improved reimplementation of the venerable Netcat and is
compatible with uClibc and musl. It provides features not available in
the ancient GNU netcat and its Busybox double like IPv6, proxies, and
Unix sockets.
Since 'nmap' itself is a fairly big program (~2.3 MB), we want to be
able to install only ncat. In addition, nmap requires an external
library, pcre.
So this commit adds sub-options to selectively enable/disable the
different programs part of nmap: nmap, nping, ndiff and ncat.
Finally, we symlink 'nc' to ncat if neiter netcat nor netcat-openbsd
is selected, even though ncat does not have the same interface as
netcat-openbsd. However, since Fedora/RHEL install nmap-ncat as 'nc',
it can be assumed that packages that depend on 'nc' know how to deal
with this diversity. For example, the virt-manager package does
that. Also user-supplied scripts can be assumed to do the right thing,
since the user also selects whether nmap-ncat, netcat or
netcat-openbsd is installed.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Thomas:
- don't just handle the ncat case in a special way: create
sub-options for all nmap tools, and use <pkg>_MAKE_OPTS and
<pkg>_INSTALL_TARGET_OPTS to select which ones should be
built/installed.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
http://autobuild.buildroot.net/results/b18/b187e64a61918f17f69588e2355a03286bc5808e
tar 1.27 subtly changed the tar format when a GNU long link entry is added
(which is done for path elements > 100 characters). The code used to set
the permission mode of the link entry to 0:
header = start_private_header ("././@LongLink", size, time (NULL));
FILL (header->header.mtime, '0');
FILL (header->header.mode, '0');
FILL (header->header.uid, '0');
FILL (header->header.gid, '0');
FILL (header->header.devmajor, 0);
FILL (header->header.devminor, 0);
This got dropped in 1.27 by commit df7b55a8f6354e3 (Fix some problems with
negative and out-of-range integers), so the settings from
start_private_header() are used directly - Which are:
TIME_TO_CHARS (t < 0 ? 0 : min (t, MAX_OCTAL_VAL (header->header.mtime)),
header->header.mtime);
MODE_TO_CHARS (S_IFREG|S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH, header->header.mode);
UID_TO_CHARS (0, header->header.uid);
GID_TO_CHARS (0, header->header.gid);
The end result is that tar >= 1.27 sets mode to 644.
The consequence of this is that we create different tar files when long path
names are encountered (which often happens when a package downloads a
specific sha1 from a git repo) depending on the host tar version used,
causing hash mismatches.
As a workaround, bump our minimum tar version to 1.27. It would be nicer to
only do this if we have packages from bzr/git/hg enabled, but that is an
exercise for later.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The goal here is to simplify the infrastructure by putting most of the
code in the dl-wrapper as it is easier to implement and to read.
Most of the functions were common already, this patch finalizes it by
making the pkg-download.mk pass all the parameters needed to the
dl-wrapper which in turn will pass everything to every backend.
The backend will then cherry-pick what it needs from these arguments
and act accordingly.
It eases the transition to the addition of a sub directory per package
in the DL_DIR, and later on, a git cache.
[Peter: drop ';' in BR_NO_CHECK_HASH_FOR in DOWNLOAD macro and swap cd/rm
-rf as mentioned by Yann, fix typos]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently all download helpers accepts the local output file, the remote
locations, the changesets and so on... as positional arguments.
This was well and nice when that's was all we needed.
But then we added an option to quiesce their verbosity, and that was
shoehorned with a trivial getopts, still keeping all the existing
positional arguments as... positional arguments.
Adding yet more options while keeping positional arguments will not be
very easy, even if we do not envision any new option in the foreseeable
future (but 640K ought to be enough for everyone, remember? ;-) ).
Change all helpers to accept a set of generic options (-q for quiet and
-o for the output file) as well as helper-specific options (like -r for
the repository, -c for a changeset...).
Maxime:
Changed -R to -r for recurse (only for the git backend)
Changed -r to -u for URI (for all backend)
Change -R to -c for cset (for CVS and SVN backend)
Add the export of the BR_BACKEND_DL_GETOPTS so all the backend wrapper
can use the same option easily
Now all the backends use the same common options.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
From ReleaseNotes156:
"""
This is a bugfix release, but it primarily disables the UDP protocol by
default.
In the last few days reports of UDP amplification attacks utilizing
inesure memcached instances have surfaced. Attackers are able to set
large values into memcached, then send requests via spoofed UDP packets.
Memcached will then send a very large number of very large UDP packets
back in response.
"""
Signed-off-by: Christopher McCrory <chrismcc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The linux git trees on github can be huge, and takes a long time to
download, which is not very nice nor convenient for newcomers.
Switch them to using a wget, with the github macro.
A nice side effect of this conversion, is that we no longer need to wait
for the git clone to finish to notice that the ref is gone; doing a wget
will instantly fail in that case.
Mechanical patch, obtained by running (hang-on tight):
$ sed -r -i -e 's/BR2_LINUX_KERNEL_CUSTOM_GIT/BR2_LINUX_KERNEL_CUSTOM_TARBALL/; /BR2_LINUX_KERNEL_CUSTOM_REPO_URL/N; s:BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https\://github.com/([^/]+)/(.+)"\nBR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="(.+)":BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,\1,\2,\3)/linux-\3.tar.gz":; s/(call github.*)\.git/\1/;' $(grep -l 'BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com' configs/*)
olimex_a20_olinuxino_lime_mali had a comment in between, so it was
manually fixed thereafter; that comment was also moved.
Except for socrates_cyclone5 which did not work previously (missing tag
in git tree?), all the affected defconfigs still download their sources.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changelog: https://community.openvpn.net/openvpn/wiki/ChangesInOpenvpn24
This bump depends on libressl 2.7.2 to avoid a build error with this
defconfig:
BR2_PACKAGE_LIBRESSL=y
BR2_PACKAGE_OPENVPN=y
Added license hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Removed patch 0001, a different version was applied upstream, please
see upstream PR 82 for details. Added license hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package is really annoying since the archive name doesn't contain
the version (iqvlinux.tar.gz), so we have added an
iqvlinux-1.2.0.3.tar.gz tarball on sources.buildroot.net. The package
will try to download iqvlinux-1.2.0.3.tar.gz from the upstream
sourceforge location, which will fail, and then fallback to the backup
mirror, where it will successfully find iqvlinux-1.2.0.3.tar.gz.
Also add hashes for license files.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Thomas: don't add custom logic for download, use
iqvlinux-1.2.0.3.tar.gz, which is hosted on sources.buildroot.net.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Remove both patches (applied upstream), and therefore remove
AUTORECONF = YES.
- Remove --disable-python as python support has been removed
(e144a06bd7)
- Remove lua optional dependency as lua support has been removed
(b52a5bef6f)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The pcre configure script does this:
if test "x$with_libpcre_libraries" != "xno"; then
LDFLAGS="${LDFLAGS} -L${with_libpcre_libraries}"
else
LDFLAGS="${LDFLAGS} `pcre-config --libs`"
fi
So if you don't pass --with-libpcre-libraries, it calls pcre-config as
available in the PATH. So it picks up pcre-config from $(HOST_DIR) or
the system, which return results inappropriate for cross-compilation.
So, let's explicitly pass --with-libpcre-includes and
--with-libpcre-libraries to avoid those issues.
Fixes:
http://autobuild.buildroot.net/results/3df11c48c8e2f795f478d1ee666dda9de19133d0/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This release adds a lot of bugfixes for x86_64 and aarch64.
It integrates gettext-tiny useful to be used with libintl stub.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Instead of selecting BR2_PACKAGE_LIBUPNP, select BR2_PACKAGE_LIBUPNP18
if BR2_PACKAGE_LIBUPNP is not enabled
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
And add two references to it: in "Submitting patches" and in "Adding new
packages to Buildroot" sections.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adding basic support modeled after the Freescale/NXP T1040RDBD4 board.
This target is used to support testing of the bootlin e5500 toolchain.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Thomas: update .gitlab-ci.yml.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
http://autobuild.buildroot.net/results/c5bb5f978602896179ff9c58ecf4ced40bb96b57
When ncurses is built with wide support, we install libncursesw (plus a
libncurses symlink) but NOT ncursesw.h, only ncurses.h. This combination
confuses the ncmpc build system as it expects a ncursesw.h when it finds
libncursesw:
meson.build:92:4: ERROR: Problem encountered: No ncursesw header found
The ncurses/ncursesw logic in the build system is only used to know what
header file to #include, and what library to link with. As we already
provide a libncurses symlink when building with wide support we can simply
force ncmpc to use the ncurses variant.
[Peter: extend commit message]
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
