Added license hash.
vnstat as of version 2.0 requires sqlite:
bb24d7bd0f
Added --disable-extra-paths to _CONF_OPTS to prevent build error:
fffc15d877
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added md5 hash provided by upstream.
Switched _SOURCE to .xz tarball provided by upstream.
This tarball contains a configure script so we do not need to
autoreconf anymore.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
apr-1.7.0 added support for 8 bytes atomics for 32 bit archs
2f61f960c8
We need to adjust our _CONF_OPTS which fixes an apache build error.
Fixes:
http://autobuild.buildroot.net/results/f24/f2461c1ed542e050afd761db5faeaaff1f51775b/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
lrzip is a compression utility that excels at compressing
large files (usually > 10-50 MB)
Signed-off-by: Sam Lancia <sam@gpsm.co.uk>
[Thomas: license is GPL-2.0+, not GPL-2.0]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security vulnerability:
CVE-2019-15903: In libexpat before 2.2.8, crafted XML input could fool the
parser into changing from DTD parsing to document parsing too early; a
consecutive call to XML_GetCurrentLineNumber (or XML_GetCurrentColumnNumber)
then resulted in a heap-based buffer over-read.
While we're at it, also change to use .tar.xz rather than the bigger
.tar.bz2.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Archive 1.30.1-0 doesn't contain libluv.pc.in which will break the build
Fixes:
- http://autobuild.buildroot.org/results/5ec6b5a3622c343f7e401b7da7d4a1da15be2733
This issue has been fixed upstream in
946784fba0,
which should be in the next release.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Acked-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add COPYRIGHT to LICENSE_FILES, and add hashes for both license files.
Signed-off-by: Christopher McCrory <chrismcc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
update hash for xxhsum.c, only code changes, not license.
Signed-off-by: Christopher McCrory <chrismcc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Replace version.c by COPYING in LICENSE_FILES, and add a hash for the
license file.
Signed-off-by: Christopher McCrory <chrismcc@gmail.com>
[Thomas: drop version.c in the license files, the newly introduced
COPYING file is much better]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add hash for LICENSE.
This version works with linux kernel 5.0 and newer. It requires
CONFIG_NF_NAT enabled in the kernel configuration, otherwise it fails
to build:
ERROR: "nf_nat_setup_info" [/home/thomas/projets/buildroot/output/build/xtables-addons-3.4/extensions/xt_DNETMAP.ko] undefined!
Signed-off-by: Christopher McCrory <chrismcc@gmail.com>
[Thomas: enable CONFIG_NF_NAT in the kernel configuration.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update hash for license files (update in year and address, some
whitespace changes)
Signed-off-by: Christopher McCrory <chrismcc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In order for the luvi version to match what is given by
release-monitoring.org, the 'v' prefix should be encoded in
LUVI_SOURCE and LUVI_SITE and not LUVI_VERSION.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In order for the openpowerlink version to match what is given by
release-monitoring.org, the 'V' prefix should be encoded in
OPENPOWERLINK_SOURCE and OPENPOWERLINK_SITE and not
OPENPOWERLINK_VERSION.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
They are required by the default udev rules.
Fixes: https://bugs.busybox.net/show_bug.cgi?id=12141
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
See full Changelog: http://fping.org/dist/CHANGELOG.md
Also add hash for license file
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The wellknown module `argparse` is now used by LuaRocks 3.2.0, instead
of a homemade argument parsing.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
this trick removes the need of the patch
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since syslog-ng 3.11.1 eventlog has been bundled with the sources.
Remove the separate package.
We don't add Config.in.legacy handling because eventlog was only used
by syslog-ng, and was not really meant to be used by anyone else, so
there is no point in warning users who had this package enabled in
their configuration that it no longer exists, as it was only used by
syslog-ng, and syslog-ng now bundles eventlog.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
[Thomas: extend explanation about why we don't have any
Config.in.legacy handling]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
paho-mqtt-c 1.3.1 is the latest stable release. The latest release
contains various bug fixes and adds TLS-PSK encryption support.
Release notes: https://github.com/eclipse/paho.mqtt.c/milestone/6?closed=1
Signed-off-by: Julien Grossholtz <julien.grossholtz@openest.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Qemu can optionally depend on nettle if available, so we should take
into account this optional dependency.
Cc: Florian Wolters <florian@florian-wolters.de>
Signed-off-by: Alexander Dahl <post@lespocky.de>
[Thomas: reword commit log, so that it makes sense in the context of
upstream Buildroot]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Create the configuration file as /etc/thttpd.conf, as expected by the
systemd unit file.
This matches other web server packages that install configuration files
at /etc/lighttpd/, /etc/apache2, etc.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* Added license hash files
* Updated site to new GNU location
* Reconfig required to use newer automake
* Dropped patch for 01_array_initialize.patch as it was fixed
* Refactored patches for makeinfo variable and write io errs
* Added new dc fix exit code patch from Debian sid
* Added new libmath offline gen cross-compile patch from Yocto
Upstream patch status: Pending
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Useful for test purposes when we want to install util-linux with a
custom TARGET_DIR, e.g.
$ make util-linux-reinstall TARGET_DIR=/tmp/util-linux
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use github macro and drop SOURCE variable to keep the default SOURCE
value which gives a much more sensible tarball name
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The init script provided by thttpd is for FreeBSD. Add a custom one,
made specifically for Buildroot.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In order for the sslh version to match what is given by
release-monitoring.org, the 'v' prefix should be encoded in
SSLH_SOURCE and not SSLH_VERSION.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove second patch (already in version)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
