Commit 701380c53b4d("fontconfig: add build fix for glibc 2.25") added
a patch that touches src/fcobjs.h. Package build system detects change
in timestamp and tries to regenerate fcobjshash.gperf which requires
gperf tool. So this commit adds dependency on host-gperf.
Since the patch is in upstream fontconfig, we can get rid of this
dependency once version is bumped next time.
Fixes:
http://autobuild.buildroot.net/results/174/17471088b26ebc840d1922d7f2aa9e69b4b49ced
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
[Thomas: improve comment in the code.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package provides execline, a (non-interactive) scripting language,
like sh, used in the s6 supervision system.
The host variant is provided as it is required to build and run the host
variants of s6 and s6-rc.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
[Thomas: add entry to DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Function copy_toolchain_sysroot, which is in charge of copying the relevant
bits from the external toolchain to the staging directory, performs an rsync
loop of various directories and excludes the pattern 'usr/lib/locale' with
the intention of skipping the directory <toolchain>/usr/lib/locale.
However, while this worked in the original commit, commit
5628776c4a broke it inadvertently. The
relevant part of the diff:
- rsync -au --chmod=Du+w --exclude 'usr/lib/locale' \
- $${ARCH_SYSROOT_DIR}/$$i $(STAGING_DIR)/ ; \
+ rsync -au --chmod=Du+w --exclude 'usr/lib/locale' \
+ --exclude lib --exclude lib32 --exclude lib64 \
+ $${ARCH_SYSROOT_DIR}/$$i/ $(STAGING_DIR)/$$i/ ; \
Notice how the source directory now contains a trailing slash, which impacts
the way the exclude rules are interpreted. Previously, when 'i' was 'usr',
the exclude of 'usr/lib/locale' would find a match. With the trailing slash,
there will never be a match, unless for a directory 'usr/usr/lib/locale'.
The right rule would have been '--exclude lib/locale'.
However, just that fix does not solve the problem in all cases, in
particular in the (common) case where ARCH_LIB_DIR is 'lib'. This is due
another change in that commit, changing the iterated values of the above
rsync:
- for i in etc $${ARCH_LIB_DIR} sbin usr ; do \
+ for i in etc $${ARCH_LIB_DIR} sbin usr usr/$${ARCH_LIB_DIR}; do \
Due to the fact that we rsync both 'usr' as 'usr/lib' (assuming ARCH_LIB_DIR
is 'lib') we need to add the correct exclude in both cases. But the exclude
is different for both. When i == 'usr', the correct exclude rule would be
'--exclude lib/locale' while when i == 'usr/lib' the correct rule would be
'--exclude locale'.
Since we would like to avoid separate cases for this, use the following
exclude: '--exclude locale/'. The trailing slash will make sure only
directories called 'locale' will match. The targeted directories are then
usr/lib/locale and usr/share/locale. The latter directory was not matched
originally, but it should not hurt changing that.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As discussed with Thomas Petazzoni, we can reduce the nesting level by early
returning on an invalid iteration.
I did not move the 'else' case (the common case) outside the if-else because
it would make the code less symmetrical and IMO makes it _less_ clear.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for the Etnaviv gallium driver.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
EUMM don't find .xs file in subdirectory (only .pm files are handled)
So, let move lib/GD.xs in the root directory.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The libsidplay2 package build system is completely broken. It is made
of a top-level configure script, which calls into sub-configure
scripts in sub-directories. However, since it doesn't use the autoconf
provided AC_CONFIG_SUBDIRS() mechanism, an "autoreconf" doesn't
recurse into the subdirectories.
Due to this, the aclocal.m4 in the libsidplay/ subdirectory doesn't
get re-generated when Buildroot autoreconfs the package. However,
since we patch one of the .m4 files in this subdirectory, when build
time comes, the package notices its aclocal.m4 is older than one of
the .m4 file, and triggers an automatic autoreconf.
Since <pkg>_AUTORECONF = YES is enabled, this automatic autoreconf
works fine: host-autoconf and host-automake are available.
Expect that on powerpc64le, we patch the configure script itself to
make it recognize powerpc64le. But this patching of the configure
script itself gets overwritten by the automatic autoreconf at the
beginning of the build step, causing the build to fail on powerpc64le.
Switching to AC_CONFIG_SUBDIRS() would allow to fix this, but
libsidplay2 needs to pass custom configure options to each of the
sub-configure scripts, something that AC_CONFIG_SUBDIRS() doesn't
support. And since libsidplay2 upstream looks completely dead, the
incentive to fix the whole thing is very limited.
Since what's broken is the autoreconfiguration of the package, what we
do is modify patch 0001-sidplay2-libs-2.1.1.patch to directly tweak the
configure script (instead of the relevant .m4 file). Thanks to this,
<pkg>_AUTORECONF = YES is no longer needed, the .m4 file is no longer
newer than the sub-configure script, and no automatic autoreconf
triggers at build time. This allows the package to build properly on
powerpc64le.
While we normally don't like patching 'configure' scripts directly, in
this case the size of the change in the configure script is very small,
and as explained above, the incentive to fix the package properly is
very limited.
In detail, the changes:
* Patch 0001-sidplay2-libs-2.1.1.patch is turned into a Git-formatted
patch
* The irrelevant changes to Makefile.in files, aclocal.m4, config.h.in,
sidint.h are removed.
* The change to my_macros.m4 is applied directly to the corresponding
configure script.
* The change to the configure.ac script regarding libdir is applied
directly to the corresponding configure script.
* The change to the configure.ac script regarding "*-k*bsd*-gnu" is
dropped, since we don't care about kFreeBSD support.
* LIBSIDPLAY2_AUTORECONF = YES is dropped from the .mk file.
Fixes:
http://autobuild.buildroot.net/results/1f6a42bfece24e09c9c7f4078d549ec5c099c89d/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit d4c4c259d2. It was
mistakenly committed and pushed: it causes Kconfig circular
dependencies, so it cannot be applied as-is.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We don't want a dozen glibc versions and there's no particular reason to
keep this old version around so drop it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
[Thomas: add entry to Config.in.legacy.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
kodi needs CWIID_MESG_BALANCE
https://github.com/xbmc/xbmc/blob/Krypton/tools/EventClients/Clients/WiiRemote/CWIID_WiiRemote.cpp#L106
It was added after the last cwiid release, which took place 2009:
2174214bc2
Instead of adding another 20k-sized patch we switch to the upstream
github repo and bump to its HEAD commit, dating back to 2010.
By doing this we can remove two patches which were applied upstream:
0001-fix-link-options-for-as-needed-90.patch
6af6786165
0002-Update-for-BlueZ-changes.patch
c5dd7d4a9a
The remaining patches were renumbered.
This patch is needed for the upcoming Kodi version bump which also adds
optional cwiid support.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently the buildroot website is not leveraging common
techniques to have a better loading speed (browser caching,
gzip compression, deflating).
This commit provides an .htaccess files with all the needed to
enable mentioned features. This .htaccess only works if the
webserver has deflate, expires and headers modules enabled.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
memtool allows one to read and write memory mapped registers via /dev/mem.
The commands are inspired by the respective commands of the barebox
bootloader. This is handy during driver development to inspect and modify
register settings. It can also be used to modify regular files and
character devices (e.g. to paint to /dev/fb0).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: add entry to DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 4422eca2d4.
We now have a workaround for the RPATH issue introduced in 3.7, so we
can use it again.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mpd package fails for both internal and external ARC toolchain as check
for pthread support fails. Such checks fails because _REENTRANT flag is
not defined in gcc even when -pthread is passed.
So we add patch to gcc that defines _REENTRANT on ARC when -pthread is
passed.
Also it disables mpd package for external ARC toolchain as it fails due
to the same issue.
This patch should be reverted as soon as the patch for GCC becomes a
part of ARC toolchain.
Fixes:
http://autobuild.buildroot.net/results/7d7/7d70b62ad996830fbeca46dffcc7a1dc030e575d//
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 1ffcf364b6 updated cmake to 3.7.0,
which requires selecting the libuv package. At the time, the libuv
package only depended on BR2_TOOLCHAIN_HAS_THREADS. However, later on,
it was changed in master to depend on BR2_TOOLCHAIN_HAS_THREADS_NPTL, a
change which was not taken into account in the cmake 3.7.0 bump that was
merged in the next branch.
Due to this, builds of cmake is attempted on architectures that don't
provide NPTL thread support, causing a build failure. This commit fixes
that by adjusting the dependency.
Fixes:
http://autobuild.buildroot.net/results/16a5e1cbb57c0124537c4f3dc0807ba1eaa975ec/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libuv is now a required dependency.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The handling of RPATH in cmake-3.7 has changed drastically, causing a
slew of build failures dues to libraries from the host being pulled in:
- domoticz : http://autobuild.buildroot.org/results/fd0/fd0ba54c7abf973691b39a0ca1bb4e07d749593a/
- freerdp : http://autobuild.buildroot.org/results/5d4/5d429d0e288754a541ee5d8be515454c5fccd28b/
- libcec : http://autobuild.buildroot.org/results/3f3/3f3593bab7734dd274faf5b5690895e9424cbb89/
- and so on...
The bug was reported upstream [0], which dismissed it altogether [1] as
being expected behaviour, quoting:
I don't think there is anything wrong with that change on its own.
It merely exposed some existing behavior in a new case.
Instead, upstream suggested in that same message that a platform
definition be used instead, quoting:
If a toolchain file specifies CMAKE_SYSTEM_NAME such that a custom
`Platform/MySystem.cmake` file is loaded then the latter can set
them as needed for the target platform.
So here we are doing so:
- we add a new platfom definitions that inherits from the Linux one,
then overrides the problematic settings;
- we change our toolchain file to use that platform instead;
- we tell cmake where to find additional modules, so that it can find
our custom platform file.
This has been tested to work in the following conditions:
- pre-installed host cmake, versions 3.5.1 (Ubuntu 16.04) and 3.7.2
(manually built)
- internal cmake, versions 3.6.3 (the current version as of this
patch) and 3.7.2 (with the followup patches).
Thanks to Jörg, Ben and Baruch for the help investigating the issue.
Special thanks to Jörg for handling the discussion with upstream and
pointing to the relevant messages! :-)
[0] http://public.kitware.com/pipermail/cmake/2017-February/064970.html
[1] http://public.kitware.com/pipermail/cmake/2017-February/065063.html
To be noted: Thomas suggested we set these directly in the toolchain
file. Unfortunately, wherever we put those settings in the toolchain
file, this does not work.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Ben Boeckel <mathstuf@gmail.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
GNU classpath builds fine on sparc and sparc64 architectures. So
we allow building it there to be consistent with the naming of
BR2_PACKAGE_CLASSPATH_ARCH_SUPPORTS.
Signed-off-by: Marcus Hoffmann <m.hoffmann@cartelsol.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported in this bug report [1], altivec support in SDL break
arbitrary C++ code.
Issue reported by test-pkg script while testing supertux package:
error: could not convert 'true' from 'bool' to '__vector(4) __bool int'
[1] https://bugs.debian.org/cgi-bin/bugreport.cgi/?bug=770670
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The iso9660 generation for grub2 assumes that grub-eltorito.img is
available. However, this image is only available for the i386-pc target
(i.e. legacy BIOS). An EFI-bootable iso9660 requires a different layout.
Since we currently can't generate the EFI-bootable iso9660 layout,
require the i386-pc target to be selected in grub.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reported-by: arnaud.miche@orange.com
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Set ENABLE_CUSTOM_COMPILER_FLAGS to OFF to disable custom flags, in
particular -fstack-protector-strong which depends on
BR2_TOOLCHAIN_HAS_SSP
Fixes:
http://autobuild.buildroot.net/results/cfcf3bc8066159dfddd1786954d78e8527858f2f/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ncftp build process tries to build and run a small program called
ccdv to beautify the build process output. If it manages to build and
run it, then it uses it.
Unfortunately, this doesn't work well when the target architecture is
close to the host architecture, but not exactly the same. Because both
architectures are close to each other, the test run of ccdv succeeds,
but real use of ccdv during ncftp build process causes an Illegal
instruction issue.
This for example happens with the CodeSourcery AMD64 toolchain, on a
build machine running an i7-4600U, and has been detected in the
autobuilders since the CodeSourcery AMD64 toolchain was upgraded at
the end of January:
http://autobuild.buildroot.net/?reason=ncftp-3.2.6
The issue was also reported by Christopher Arguin back in July 2016:
http://lists.busybox.net/pipermail/buildroot/2016-July/168026.html
and at the time, we identified that simply disabling the ccdv tool, by
passing --disable-ccdv, was enough to solve the issue. But Christopher
never submitted the patch, so the problem remained unfixed.
Therefore, we pass --disable-ccdv to the configure script, which
fixes:
http://autobuild.buildroot.net/results/6eadad0e879ca70bb07b13b4196d42c64b11699f/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package fails when building with ARC external toolchain
Marking this with special comment "# ARC toolchain issue" as the package
is to be enabled as soon as the issue with the ARC toolchain is
resolved.
Fixes:
http://autobuild.buildroot.net/results/fb6/fb677a917545adee321bdcd2c2519c81326448c4//
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package fails when building with ARC external toolchain
Marking this with special comment "# ARC toolchain issue" as the package
is to be enabled as soon as the issue with the ARC toolchain is
resolved.
Fixes:
http://autobuild.buildroot.net/results/28a/28a92049a6ceef005787c5779f77ecf3fe8ad642//
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit e482ebf51d attempted to fix the
installation of qt5quickcontrols by only installing the PrivateWidgets
directory for the 5.8.0 version.
However, the availability of PrivateWidgets has nothing to do with the
version; in both 5.6.2 and 5.8.0, the installation is gated by the
following statement in src/src.pro:
qtHaveModule(quick):qtHaveModule(widgets): SUBDIRS += widgets
i.e. it is installed when both the Quick and the Widgets module are
available. The Widgets module is controlled by Buildroot's
BR2_PACKAGE_QT5BASE_WIDGETS symbol, the Quick module is controlled by
Buildroot's BR2_PACKAGE_QT5DECLARATIVE_QUICK. The qt5quickcontrols
package selects BR2_PACKAGE_QT5DECLARATIVE_QUICK so it is not really
needed to include it in the condition. However, it is theoretically
possible to build this package without QtQuick. Also, adding this
condition makes it consistent with src.pro.
Note that commit e482ebf51d introduces a
second fix (not mentioned in the commit message): for version 5.6.2, the
Layouts directory is installed, but in 5.8.0 this directory doesn't
exist any more. Therefore, a separate condition on the version is still
needed.
Fixes:
http://autobuild.buildroot.net/results/1ff3e9ad4ba518d0a37f9fc12038bf9020f28094
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit a75ab1fc1d ("package/classpath:
Don't depend on jamvm"), we removed the dependency of classpath on
jamvm. Since jamvm is only available for a reduced set of architectures,
classpath could until this commit until be built on those architectures.
However, now that this dependency has been removed, classpath can
potentially be built for all architectures supported by Buildroot, even
though it doesn't support all of them.
Since adding support for additional architectures in classpath doesn't
make much sense, because classpath is in Buildroot only usable with
JamVM anyway, and JamVM is only available for a small set of
architectures, this commit simply makes classpath available on the
architectures that it supports.
By doing so, it also removes the or1k support patch which was added by
commit f12a146f81, since anyway or1k is
not supported by JamVM.
Fixes:
http://autobuild.buildroot.net/results/55eb89f89e96b94a821778bc18ed844af08b7460/
(classpath on microblaze)
http://autobuild.buildroot.net/results/279dd731bd9ecf5f9d54bda3715caeaa7cbcdbb3/
(classpath on nios2)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On PowerPC64(le), we patch all configure scripts. Due to this, the
version.texi in OpenOCD files gets regenerated, and then since it has
a newer date than openocd.info, openocd build system rebuilds the
documentation. Unfortunately, this documentation rebuild fails on old
machines.
We work around this by faking the date of the generated version.texi
file, to make the build system believe the documentation doesn't need
to be regenerated.
Fixes:
http://autobuild.buildroot.net/results/3cbe65a46e75b8e67846d593884c96df97dec7a4
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cmake-3.7 has a bug in how it handles rpath, linking with libraries from
the host.
Until we completely understand the issue, just blacklist cmake-3.7.
The issue has been reported upstream:
http://public.kitware.com/pipermail/cmake/2017-February/064970.html
Reported-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Ben Boeckel <mathstuf@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 68cebedeb9 ("assimp: work around
gcc bug on SuperH"), a work around was added to make the package build
with gcc on SuperH. The condition included a test on the gcc version,
which was mistakenly done on the host gcc version, while a test on the
target gcc version was intended.
Thanks to Peter Korsgaard for spotting the issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit enables PAM support in systemd if BR2_PACKAGE_LINUX_PAM is
set. Some essential config files are not installed without the
--enable-pam option.
Signed-off-by: James Balean <james@balean.com.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gcc versions earlier than gcc 6.x fail to build assimp on SuperH when
static linking:
AssxmlExporter.cpp:623:1: error: unable to find a register to spill in class 'GENERAL_REGS'
It's the combination of -Os and *not* having -fPIC that makes gcc
fail, which explains why configurations with dynamic linking work
fine.
-Os -fPIC -> works
-Os -> fails
-O2 -fPIC -> works
-O2 -> works
Therefore, as a workaround, we are forcing the use of -O2 on SuperH
when the gcc version is older than gcc 6.x and we're statically
linking.
Fixes:
http://autobuild.buildroot.net/results/ec88aa8118179e30e24603cc45292047dca19216/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX has been removed in commit
311bc137da ("toolchain: kill ADI
Blackfin toolchain"), so this "depends on" is useless.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
