Rust upstream distributes tarballs with separate rust and cargo
binaries, but also tarballs with everything together. The latter
contains a bit more than what we need, so the download is slightly
larger than separate cargo-bin and rust-bin. But it simplifies our life
if we do the same in rust-bin as in rust (i.e. get both rust and cargo).
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: David Pierret <david.pierret@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As no package depends on the standalone cargo package, it can be
dropped.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: David Pierret <david.pierret@smile.fr>
Tested-by: David Pierret <david.pierret@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adding mbpfan, a fan control daemon for MacBook laptops.
Signed-off-by: Christian Stewart <christian@paral.in>
[Peter: add hash file, drop Debian init script, drop systemd symlinks, add
DEVELOPERS entry]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds some packages I contributed to my entry.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Banana Pi M2 Zero [1] is a board from Sinovoip, based on the
Allwinner H2+ SoC.
It is similar to the other Banana Pi M2* boards, from which this
configuration is inspired.
[1]: http://www.banana-pi.org/m2z.html
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Basic support for the Marvell ESPRESSObin, by Globalscale Technologies.
http://espressobin.net
The kernel config has been extended with a fragment to enable switchcore
support, DSA drivers, and VLAN filtering in the bridge. To make use of
this you need a custom libnl based application, or the iproute2 suite
rather than the brctl tools, which don't support the VLAN filtering.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package is a new dependency on grpc versions > 1.25.0
Tested with the following distributions:
- Debian 9
- CentOS 7
- Fedora 32
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Netopeer2 is a set of tools implementing network configuration
tools based on the NETCONF Protocol.
Netopeer2 needs libnetconf2 to have SSL/TSL and SSH support, so
we enable both openssl and libssh+server from netopeer2, so that
libnetconf2 has appropriate support. But netopeer2 does not use
either, so does not build-depend on them.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[yann.morin.1998@free.fr:
- fix dependencies and their comments
- explain openssl and libssh+server dependencies
- fix codestyle in Config,in, noticed by Adam
- fix codestyle in .mk
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
reSIProcate is a framework that aims to fully implement the SIP
protocol in first class C++. It is intended for use in other
applications, such as the repro SIP proxy.
Signed-off-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
[Thomas:
- Fix incorrect "select"
- Simplify the build command, to allow the package Makefile to use
pkg-config, so added host-pkgconf
- Use a full destination path for the installation step
- Use the Github macro]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for imx6ullevk_defconfig that allows booting a mainline
kernel and mainline U-Boot.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add the new SAMA5D27 WLSOM1 Evaluation Kit with linux4sam_6.2
components. Update README file with new defconfigs and new
packages/website.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
parprouted is a daemon for transparent IP (Layer 3) proxy ARP
bridging. This is useful for creation of transparent firewalls
and bridging networks with different MAC protocols. Also,
unlike standard bridging, proxy ARP bridging allows to bridge
Ethernet networks behind wireless nodes without using WDS or
layer 2 bridging.
https://www.hazard.maks.net/parprouted
Signed-off-by: Owen Walpole <owen@walpole.dev>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for RK3399 based rockpi-4 targets (model A, B, C)
with below features:
- Custom U-Boot 2020.07-rc4
https://github.com/amarula/u-boot-amarula.git
branch rock-pi
- Linux 5.4.46
- GPT partition layout is being used
- Default packages from buildroot
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add initial support for RK3399PRO SOM based rockpi-n10 target
with below features:
- Custom U-Boot 2020.07-rc4
https://github.com/amarula/u-boot-amarula.git
branch rock-pi
- Linux 5.7.2
- GPT partition layout is being used
- Default packages from buildroot
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bitwise is multi base interactive calculator supporting dynamic base
conversion and bit manipulation. It's a handy tool for low level
hackers, kernel developers and device drivers developers.
Signed-off-by: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package contains the Boost ODB profile library. The Boost profile
provides support for persisting Boost smart pointers, containers, and
value types with the ODB system.
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package contains the MySQL ODB runtime library. Every application
that includes code generated for the MySQL database will need to link
to this library.
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package contains the PostgreSQL ODB runtime library.
Every application that includes code generated for the PostgreSQL
database will need to link to this library.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[Kamel: Fix incorrect license, remove unneeded dependency on host-odb]
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package contains the common ODB runtime library. Every application
that includes code generated by the ODB compiler will need to link to this
library.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[Kamel:
- Fix incorrect license
- Remove unneeded dependency on host-odb]
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ODB is an open-source, cross-platform, and cross-database
object-relational mapping (ORM) system for C++. It allows you to
persist C++ objects to a relational database without having to deal
with tables, columns, or SQL and without manually writing any mapping
code.
ODB supports MySQL, SQLite, PostgreSQL, Oracle, and Microsoft SQL
Server relational databases as well as C++98/03 and C++11 language
standards. It also comes with optional profiles for Boost and Qt
which allow you to seamlessly use value types, containers, and smart
pointers from these libraries in your persistent C++ classes.
This package is used for auto-generating ODB specific header files
into useable code that can be linked against a seperate libodb and a
specific libodb database library. As such, it is only needed as a
host program and is not user selectable.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[Kamel: Fix incorrect odb license]
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
[Thomas: add patch fixing gcc10 build, add references to upstream
commits]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libcutl is distributed in source code and includes the standard autotools
build system as well as the VC++ project files. It is a dependency for odb.
Because ODB is a host-only package, and no other package depends on libcutl,
this package will also be a host-only package.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Also:
- Add missing hash file.
- Add new libraries to the install target.
- Apply patch to fix build with musl (MR sent upstream in [1]).
- Since there is no maintainer for this package, I can help maintain it,
so add the package to the DEVELOPERS file.
[1] https://github.com/Azure/azure-c-shared-utility/pull/456
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Libnids is a C based networking library, part of networking intrusion
detection tools. It can watch network traffic & provide informations.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
[Thomas:
- only needs libpcap as a mandatory dependency
- add patch to fix libpcap detection
- pass install_root= at installation time
- drop glibc dependency, it builds fine with uclibc]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
FUSE-overlayfs is an implementation of overlay+shiftfs in FUSE, intended to be
used as the backing filesystem for rootless containers.
Reference: http://github.com/containers/fuse-overlayfs
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
License is BSD-3-Clause as stated in upstream LICENSE.txt:
https://github.com/web2py/yatl/blob/master/LICENSE.txt
An issue was opened to add LICENSE.txt in pypi tarballs:
https://github.com/web2py/yatl/issues/21
Add host variant as it will be needed for python-web2py
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ttyd is a simple command-line tool for sharing terminal over the web.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
EarlyOOM daemon for triggering Linux OOM killer before running out of
memory, avoiding situations where the machine becomes unresponsive from
out of control swapping.
Some desktop distributions are installing and enabling this daemon by
default to prevent unresponsive machines in OOM scenarios.
https://fedoraproject.org/wiki/Changes/EnableEarlyoom
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
PyBind is a light (headers only) package for C++/Python and Python/C++
bindings.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A few conflicts had to be resolved:
- Version number and hash for mesa3d-headers/mesa3d
- Patches added in qemu, and the qemu version number
- The gnuconfig README.buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds support for the i.MX8M Nano EVK Board [1].
The final boot image is created from uboot and firmware binaries in post
image script board/freescale/common/imx/imx8-bootloader-prepare.sh
Note that this config is based on 4.19.35_1.1.0 ; hence, the kernel
configuration needs host-openssl to build.
[1] https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/evaluation-kit-for-the-i-mx-8m-nano-applications-processor:8MNANOD4-EVK
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Reviewed-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
Reviewed-by: Julien Olivain <julien.olivain@oss.nxp.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
gloox is a rock-solid, full-featured Jabber/XMPP client library,
written in clean ANSI C++. It makes writing spec-compliant clients
easy and allows for hassle-free integration of Jabber/XMPP
functionality into existing applications. gloox is released under the
GNU GPLv3. Commercial licensing and support are available.
Signed-off-by: Yair Ben Avraham <yairba@protonmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The author has completely ripped off the git tree, so the sources
are no longer available, with that message:
"Please look for alternatives for wiringPi"
And indeed there is a better alternative, using the kernel GPIO
subsystem and drivers.
Note that queezelite looses that functionality now, but upstream
squeezelite has done changes to do without wiringpi (hint for an
upgrade?).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Hiroshi Kawashima <kei-k@ca2.so-net.ne.jp>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
I added this package while working for Grandcentrix but
am willing to maintain it further.
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
mtdev2tuio breaks the builds every now and then and is not
maintained upstream. It does not seem to be useful any more.
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
His e-mail is no longer working:
<stephan.hoffmann@ext.grandcentrix.net>: host aspmx.l.google.com[74.125.133.26]
said: 550-5.2.1 The email account that you tried to reach is disabled.
Learn more at 550 5.2.1 https://support.google.com/mail/?p=DisabledUser
o3si10331209wre.302 - gsmtp (in reply to RCPT TO command)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Previous address is still valid but not used as primary address any
longer
Signed-off-by: Davide Viti <zinosat@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
matio is an C library for reading and writing MATLAB MAT files.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- I fixed build problems on cups and cups-filters but don't use them.
- gtest, libpam-radius-auth, libpam-tacplus and perl-file-util were
used in my previous job. I don't have access to the packages that
use them neither to the corresponding test infrastructure anymore.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This library provides an easy way to add styling to programs that produce
output to a console or terminal emulator window.
libtextstyle is for you if your application produces text that is more readable
when it is accompanied with styling information, such as color, font
attributes (weight, posture), or underlining.
Our gettext-gnu package currently has HOST_GETTEXT_GNU_SUBDIR = gettext-tools
so we only configure and build the gettext-tools sub-directory. Version 0.20.1
of gettext-gnu now requires libtextstyle, which the subdirectory gettext-tools
does not provide.
We have three options:
1) Add hooks to configure and build libtextstyle as a pre-configure hook in
gettext-gnu, and install it in a pre-install hook.
2) Revert to building the whole of gettext.
3) Add a separate package for libtextstyle.
Here are the results of a test with BR2_JLEVEL=4:
- Only gettext-tools: 38.86s user 22.13s system 124% CPU 49.035 total
- gettext + libtextstyle: 40.78s user 14.57s system 146% CPU 37.817 total
- All of gettext: 203.18s user 122.87s system 161% CPU 3:22.39 total
As seen above, compiling the entire gettext package takes 5x longer than
building libtextstyle and gettext separately!
As such, the best option is option 3, as the time increase to build
libtextstyle is negligible.
Tested with test-pkg -p gettext-tiny in Debian 10 and Centos 7
br-arm-full [1/6]: OK
br-arm-cortex-a9-glibc [2/6]: OK
br-arm-cortex-m4-full [3/6]: OK
br-x86-64-musl [4/6]: OK
br-arm-full-static [5/6]: OK
sourcery-arm [6/6]: OK
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cage is a "kiosk" Wayland compositor, which shows a single maximized
application at a time and limits user interaction to that application.
https://www.hjdskes.nl/projects/cage/
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
wlroots is a modular library which provides building blocks to
implement Wayland compositors. wlroots is a dependency of the
Cage Wayland compositor.
https://github.com/swaywm/wlroots/
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
