This flag is already correctly set by the cmake-package infrastructure.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This flag is already correctly set by the cmake-package infrastructure.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This CMake flag is usually used to adjust compiler flags (like: -Ox, -g,
etc).
So, it makes sense for Buildroot to globally drive this CMake flags in
the cmake-package infrastructure.
However, if a package prefer overriding this default setting, it still
can via the <PKG>_CONF_OPT variable.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This CMake flag is used to enable tests. It may not disable the test
programs from being built, but it controls the test execution.
Since we don't care about building the tests (and usually disable them
when possible), make sure Buildroot won't try to run them.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch updates the generated toolchainfile.cmake to use ccache.
When toolchainfile.cmake is used inside Buildroot, using ccache during
the build is driven by a CMake knob: USE_CCACHE, automatically set by
the cmake-package infrastructure and reflecting the BR2_CCACHE value.
Since this toolchainefile.cmake file can be used outside Buildroot, and
this file also set a couple of things (among these: the sysroot cflag,
some pkg-config environment variables), it is important to set the
compiler variables as well to keep the consistency of the
cross-compilation configuration.
So, when it is used outside Buildroot, using ccache for the build is
driven by the ccache program availability.
Note that using ccache for the build is achieved by setting the *_ARG1
CMake variables to let CMake use ccache without failing in detecting
the compiler.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch allows sharing or moving the toolchains.
This is a step toward making the toolchain/sdk relocatable.
Closes#6818
[Peter: reword comment as suggested by Thomas]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Uwe Strempel <u.strempel@googlemail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch introduces a toolchainfile.cmake.in template which is filled
by Buildroot.
Using a toolchainfile.cmake.in template file allows to avoid overloading
quoting and/or escaping and it becomes much more similar to the
resulting file.
This patch also cleans up the quoting style.
[Peter: drop stdin redirect as suggested by Thomas]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc 4.7.x is going to be retired soon, and now that gcc 4.9.0 is out,
it's time for Buildroot to switch to gcc 4.8.x as the default gcc
compiler version.
See https://gcc.gnu.org/ml/gcc/2014-05/msg00324.html for details about
gcc 4.7.x life cycle.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As suggested by Gustavo, this patch bumps mpg123 to 1.20.0, and
therefore superseds the patch initially provided by Sven Neumann. In
1.20.0, there is a new CPU type arm_fpu, which will compile code for
both VFP and NEON, and choose at runtime which one to use.
Similarly for AArch64, the option --with-cpu=aarch64 will compile both
the NEON and generic decoders, and select at runtime which one to use.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add glibc 2.19-svnr25243 and a choice menu to select between different
eglibc versions.
Blacklist it for PowerPC SPE since it doesn't even build.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These are already in toolchain/toolchain-buildroot/Config.in and since
package/glibc/Config.in is filtered by BR2_TOOLCHAIN_USES_GLIBC there's
no need to duplicate this.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
elf2flt is specifically for cases where an MMU is not available.
There is no point in building elf2flt when using an MMU.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reformat help text to fit in menuconfig, slightly tweak wording, strip
trailing spaces and clarify that wpa_supplicant is only a runtime
dependency.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- add new configuration option '--enable-wispr' (disabled by default)
- move gnutls dependency to "wispr" config option
[Peter: drop gnutls ref for wchar, tweak help text, simplify .mk]
Signed-off-by: Heiko Abraham <abrahamh@web.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes misinstallation of xfont_font-bh-ttf-1.0.3/42-luxi-mono.conf to
'target@baseconfigdir@/conf.avail/42-luxi-mono.conf'
instead of proper place in the target directory (because of buggy
fontconfig.pc file).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default the 'make install' step for qt5base will strip all the binaries
and libraries when they are installed to staging. This hinders debugging
as the libraries in staging dir have been stripped and is unnecessary
as buildroot will strip all files on the target
Signed-off-by: Will Wagner <will_wagner@carallon.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
thrift uses the __sync_fetch_and_add() atomic primitive that is not available
for ARC.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Support for ARC CPUs was added in libffi after 3.0.13 vesion was cut and up
until now no new release has been done. So to enale libffi on ARC we need this
set of patches.
These are corrsponding commits in libffi:
* b082e15091961373c03d10ed0251f619ebb6ed76 - Add ARC support
* 0f8690a84c874ec09a090c8c6adfb93c594acac6 - Rebuild for ARC additions
* d918d47809c174d62283306b282749f8db93661f - arc: Fix build error
The first patch was modified a bit (cut changelog part) to accomodate
changes not related to ARC between 3.0.14 and changes in question.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Misca Jonker <mjonker@synopsys.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump exim to get an urgent security fix.
We should not be impacted, since we're not building with DMARC (where
the flaw is), but better safe than sorry.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In pkg-generic.mk, an entry would be added to each of the permissions,
devices and users tables, even if FOO_PERMISSIONS/DEVICES/USERS is empty. In
that last case, the entry would contain only the separator, which is
substituted to '\n' in fs/common.mk.
For configurations with many packages, this would render the build output a
bit odd, containing many \n instances (even though the end result in the
target would of course be the same).
This patch cleans up the build output by only adding to these tables when
the package actually specified contents for them.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Tested-by: Romain Naour <romain.naour@openwide.fr>
Acked-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As suggested by Arnout.
We don't provide fakeroot for the target, and using a powerpcp4le machine as
the build host is quite unlikely - So drop the patch.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current SysV startup script create a directory which is necessary
for dropbear to correctly work.
This creation is not done with systemd.
Instead of both init creating the directory, we add the creation of this
directory to the INSTALL_TARGET_CMDS to make sure it's present.
[Peter: use make syntax for TARGET_DIR as pointed out by Thomas]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes http://autobuild.buildroot.net/results/0a3/0a392087878f80a70435981856455a30152b684d/
When building static, we need to tell exim that it needs to link
statically (obviously), and that it should link against pthreads.
Yet, exim is still not happy with that, as it still wants to build
something (a version-related program) at install time, so we need
to replicate the ld flags at install time.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump version to v1.6 and drop 2 upstream patches.
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Acked-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The package provides a webserver and, eventually, a library: this is
what Centos, among other distros, is doing.
[Peter: correct install -D invocation]
Signed-off-by: Davide Viti <d.viti@infosolution.it>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: only install *.so.* if !BR2_PREFER_STATIC_LIB]
Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: only install *.so.* if !BR2_PREFER_STATIC_LIB]
Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove upstreamed patches.
See http://qt-project.org/qt5/qt53 for the release information.
Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes http://autobuild.buildroot.net/results/3e2/3e2b733758651f7a168832de2d3b34afc171609d/
We recently (dfc3cc23af: gdb: switch to 7.x for Blackfin) moved to the
normal 7.x versions for bfin, but Config.in wasn't updated, causing bfin to
still use the old 6.6a variant (but without the uClibc patch) if the
host-gdb isn't selected, breaking the build.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Support of ARC was added after 1.15.1 release so until the next official release
happens this patch enables building and execution of Xorg server on ARC.
Upstream commit:
http://cgit.freedesktop.org/xorg/xserver/commit/?id=c08d2b8ccb0158dbf1f529f80cc3236e66236cce
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Bernd Kuhls <berndkuhls@hotmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This enables powerpc64 and powerpc64le. Currently, le needs at least
glibc 2.19 and gcc 4.9.0. For gdb, 7.7.1 works (added in an earlier
patch).
[Peter: also disallow gcc 4.8 for ppc64le]
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To prep for powerpc64le, we also disable gdb prior to 7.7.1 on
powerpc64le.
The default gdb on powerpc64le is set to 7.7.
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Mongoose has changed quite drastically in the last months.
Here is a list of changes which had to be applied:
- Bump version from 3.7 to 5.3
- use tarball download via github helper iso git clone
- need largefile support
- compilation takes place into "examples"
- weberver source is now "server.c"
- adapt to new command line options
- SSL support now controlled via NS_ENABLE_SSL
[Peter: extend commit text, use CFLAGS_EXTRA, only build server]
Signed-off-by: Davide Viti <zinosat@tiscali.it>
Cc: Will Wagner <will_wagner@carallon.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using this minimal defconfig
BR2_TOOLCHAIN_EXTERNAL=y
BR2_PACKAGE_PYTHON=y
BR2_PACKAGE_BERKELEYDB=y
the current code does not prevent the build of
output/build/python-2.7.6/Modules/_bsddb.o
because the module is really called _bsddb,
see python-2.7.6/Modules/_bsddb.c, line 9604.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package does not install any binary files, only headers.
[Peter: drop invalid license file]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for powerpc64le-linux-gnu. This includes
needed patches to fakeroot and gmp.
gmp patch is from upstream HG tree.
fakeroot patch is from Ubuntu written by Adam Conrad.
Signed-off-by: Jeff Bailey <jeffbailey@google.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
At startup, XBMC complains that PCRE is lacking unicode properties
supports.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add missing license info and file for package 'hwdata'
[Peter: GPLv2 should be '+' variant, clarify that it is dual licensed]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Important fix to EGL surface validation.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
samba produces particularly large binaries, and the relocations needed
for it do not fit in the possible relocation mechanisms available on
nios2. Since samba is very unlikely to be used on nios2, let's just
disable it, as we've done for AVR32.
Fixes:
http://autobuild.buildroot.net/results/7b9/7b9dcb537f98714fe57fe384ecbb49bd9ae52aee/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for ARC architecture in Mplayer's configure script.
Same patch has been submitted to upstream MPlayer. This patch should be
removed after Buildroot will bump to next version of MPlayer (after 1.1.1).
Fixes http://autobuild.buildroot.net/results/f62/f62ace7ba49d492ea224bb8f3beb547389aab517/
[Peter: add autobuilder link]
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When installing a localtime, check it is a valid timezone.
[Peter: extend error message to make it clear to the user what to change]
Reported-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported by Fatih Aşıcı on the mailing list it sometimes fails with
the host openssl depending on versions when development files are
installed.
And as suggested by Thomas Petazzoni it's really not required for
anything so just disable it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update 900-musl-support.patch with upstreamed chunks.
Now upstreamed hence dropped:
840-PR57717.patch (in another way).
842-gcc-4.8.2-Fix-PR-target-58854.patch
843-gcc-4.8.2-Fix-PR-target-58595.patch
850-xtensa-libgcc-linker-script.patch
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes http://autobuild.buildroot.net/results/246/246c067f1e9def748498f0c6fa6988c036e1d109/
Pass the libraries to be linked in LDLIBS instead of LDFLAGS so the end up
after the object files on the linker command line.
While we are at it, use TARGET_CONFIGURE_OPTS instead of explictly passing
CC/CFLAGS/LDFLAGS.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
giblib is now part of feh, so drop giblib as dependency.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
printf is POSIX-compliant, echo -e is not.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
printf is POSIX-compliant, echo -e is not.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When Python 3 is selected in Buildroot, the host/usr/bin/python
symlink of the host Python interpreter points to python3. Packages
that need to use the host Python 2 interpreter have to use python2.
In commit 40218a1652 ("nodejs: force
python interpreter"), Samuel made some changes to the nodejs package
to use python2. One part of the changes is to sed a .gyp file to
replace the string 'python' by the path to python2. However, this
operation is done *after* calling the configure script, so it has in
fact no effect. Putting this sed before calling the configure script
fixes the problem.
However, there is a better solution: the nodejs build system has a
mechanism of variables, and it already defines a python variable
according to the environment variable PYTHON being passed. So this
patch instead adds a new patch to nodejs to use this python variable.
Fixes:
http://autobuild.buildroot.org/results/aff/affd7300895ec400de50a33d51b4e94e15d63341/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, it is possible that more than one provider of a virtual package
is selected in the menuconfig.
This leads to autobuild failures, and we do not protect the user from
making a mistake in the configuration. The failure is then hard to
troubleshoot in any case.
We can't use kconfig constructs to prevent this, since kconfig does not
tell how many options did a select on another option.
This change introduces a new variable a provider *must* define to include
all the virtual packages it is an implementation of. Then, when evaluating
the package's rules, we check that the provider is indeed the declared one
for each virtual package it claims to be an implementation of.
This works by taking advantage that when more than one provider is
selected, only one of them will 'win' in setting the _PROVIDES_FOO
option. Thus any provider just has to check it is indeed the declared
provider. If not, it means that one or more other provider is selected.
This gives the opportunity to the user to change its configuration, and
we can match the error message in the autobuilders to skip those failures
(we can skip them instead of reporting them, since they are obviously
configuration errors that should not happen in the first place.)
[Note: kudos to Arnout for suggesting this actual implementation. :-)]
Fixes:
http://autobuild.buildroot.org/results/285/2851069d6964aa46d26b4aabe7d84e8c0c6c72cehttp://autobuild.buildroot.net/results/9b7/9b7870354d70e27e42d3d9c1f131ab54706bf20e
[...]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ipsec-tools currently fails to build for Blackfin due to GLOB_TILDE
not being supported in Blackfin external toolchains. However, after
fixing this problem (which will be fixed in later versions of the
Blackfin external toolchains) allows to discover that ipsec-tools uses
fork() anyway.
Therefore, this patch simply marks ipsec-tools as not available on
non-MMU systems.
Consequently, it fixes:
http://autobuild.buildroot.org/results/fc4/fc4ef4101a20e64eb52da56557d6996dd73b3d86/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even though some Blackfin processors have PCI interfaces, the PCI
support is not supported by the Linux kernel: it has been marked as
broken since 2008. This means there's probably little interest for PCI
on Blackfin, and consequently little interest about getting pciutils
to build.
Fixes http://autobuild.buildroot.net/results/a27/a27ce61967ef8f780887f7681c8b0edd91656be6/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
3.1.0 is dated 2011-12-04.
3.1.1 is from 2014-02-20 and has quite a few enhancements.
Signed-off-by: oli vogt <oli.vogt.pub01@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
samba produces particularly large binaries, and the relocations needed
for it do not fit in the possible relocation mechanisms available on
AVR32. Since samba is very unlikely to be used on AVR32, let's just
disable it, as we've already done for samba4.
Fixes:
http://autobuild.buildroot.net/results/0142b1d5b8c3f20f1bff76ece646d901407f7490/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
fixes
http://autobuild.buildroot.net/results/27a/27a674c6a19a729fae5cc33de0360b2a061930c1/
This patch indeed fixes several problems based on the autobuilder-defconfig used.
1) Add missing dependencies when opengl is detected by webkit to satisfy autobuilder:
checking which GPU acceleration backend to use... opengl
checking for XCOMPOSITE... yes
checking for XDAMAGE... no
configure: error: Package requirements (xdamage) were not met:
2) ... but opengl should not have been detected with the used defconfig:
$ grep MESA .config
BR2_PACKAGE_MESA3D=y
which will lead to a link error although webkit configure found all dependencies:
/home/br2/output/host/opt/ext-toolchain/bin/../lib/gcc/mips-linux-gnu/4.7.3/../../../../mips-linux-gnu/bin/ld: cannot find -lGL
3) same is valid for glx, having GL/glx.h means nothing
4) add some configure options for gles/egl as well, just to make sure ;)
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For some reason, we were keeping gdb version 6.6a specially for
Blackfin. However, it turns out that support for Blackfin was merged
in gdb 7.4 (cross-gdb and gdbserver, not native gdb on the
target). Therefore, we can simply remove the support for version 6.6a
and use 7.5 as the default.
Both 7.4 and 7.5 were built tested, including cross-gdb and gdbserver.
The original reason to switch to 7.x is that 6.6a doesn't build for
Blackfin FLAT, and while it builds for Blackfin FDPIC, it only builds
libiberty.a and does not actually build a cross debugger.
Fixes:
http://autobuild.buildroot.org/results/b47/b47f85553336b7f63ee4ecdf8598374ce4a225a3/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The build of host-gdb 7.4 fails due to some texinfo issue. To avoid
that, use the same trick as is used for the target variant of gdb:
tell gdb that makeinfo is missing.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Makefile's target "install-magickincarchHEADERS" and "magick-install-data-local"
install both the same file (magick-baseconfig.h) in the same time...
The problem can be reproduced with:
mkdir /tmp/bar
/usr/bin/install -c -m 644 foo /tmp/bar &
/usr/bin/install -c -m 644 foo /tmp/bar/foo
/usr/bin/install: cannot create regular file '/tmp/bar/foo' : File exists
So, remove one of them.
Fixes:
http://autobuild.buildroot.net/results/d34/d34077ce582866c50bbd90de10bbe593e39463f1/build-end.log
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By design, building duma on Blackfin and other non-MMU platforms is
quite useless: it uses page mappings to detect buffer overrun and
use-after-free programming errors. Therefore, this commit simply marks
duma as not available on non-MMU platforms.
Fixes:
http://autobuild.buildroot.org/results/951/9519d7abb45c6a789874ec6bb84418c31a98916b/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There will soon be new options to the graph-depends script, which we
can only sanely pass via environment variables.
Currently, we use such an environment variable to pass the maximum depth
of the dependency graph; the name of that variable is explicit that it
contains just the depth.
However, there has been so far no release of Buildroot which would make
use of that variable, so no user should have come to rely on it.
Rename that variable so it is less specific, and more generic, so it can
be used to pass more options to graph-depends.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We need to tell the duma Makefile what OS we're gonna run on, or it
uses default values.
It turns out the default values are the same as for OS=linux (and so
this change should be a no-op), but it's just better to force it, and
it avoids a warning during the build.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even though pulseaudio has some HAVE_FORK compile-time conditionals to
avoid using fork(), those parts of pulseaudio are not using it. Since
using pulseaudio on !MMU platforms is fairly unlikely, we simply
disable it when no MMU is available, and propagate this dependency to
the appropriate locations.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
fluxbox uses the fork() system call, not available on noMMU
platforms. It's also fairly unlikely to have to use a full-blown
X.org window manager on such platforms.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
php-imagick selects imagemagick, and imagemagick 'depends on
BR2_USE_MMU', but this dependency was not propagated to
php-imagick. This commit fixes that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
zyre selects filemq, and filemq 'depends on BR2_USE_MMU', but this
dependency was not propagated to zyre. This commit fixes that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
sane-backends currently doesn't build with the ADI external
toolchains, due to an internal compiler failure. However, using the
internal toolchain backend for Blackfin goes past this internal
compiler failure, but raises the problem that sane-backends uses
fork(). Sane-backends has a --enable-pthreads option that allows to
use threads instead of forking in some parts of sane, but there are
still some other areas of sane-backends that continue to use fork().
Since the probability of using sane-backends on a noMMU system is
fairly small, we'll just disable this package for now on such
architectures, until someone cares enough to investigate deeper.
Fixes:
http://autobuild.buildroot.org/results/136/136100c3a2d843b7915fdd83d23d8b301fee577e/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
elfutils depends on !BR2_avr32, but this dependency was not properly
propagated to the comment about toolchain options. This commit fixes
that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
printf is POSIX-compliant, echo -e/n is not.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
printf is POSIX-compliant, echo -e/n is not.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No functional change, but cleaner.
Remove the double --disable-manuals and move the debug handling together
with the other optional configure flags.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ldconfig breaks links created by gpu-viv-bin-mx6q.
fixes
http://autobuild.buildroot.net/results/ab5/ab57dd3729d529366808cbfc802f49360b2ec2b9/
[Peter: use NETSNMP_INSTALL_*_OPT, only install initscript for sysv init]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Qt5Quick1 module doesn't need OpenGL libs and declarative module.
This module can be used to port qt4 qml apps to qt5. Patch has been tested
with linuxfb output plugin.
Signed-off-by: Wojciech Slenska <wojciech.slenska@gmail.com>
Reviewed-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package fails to compile for MIPS64 n32 platforms. We are in
conversations with upstream to fix this problem. Meanwhile we disable
this package until we fix it.
Fixes:
http://autobuild.buildroot.net/results/0e3/0e3f1482d6f2f9bddc53d4e78b575120a2729e1d/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The --with-fontdir switch has been substituted by the --with-fontrootdir
switch a few versions ago. The use of the old configuration switch was
causing error messages like the following:
_FontTransOpen: Unable to Parse address ${prefix}/share/fonts/X11/*/
[dix] Could not init font path element ${prefix}/share/fonts/X11/*/, removing from list!
Signed-off-by: Filippo Sironi <filippo.sironi@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
this patch fixes :
luajit: error while loading shared libraries: libluajit-5.1.so.2: cannot open shared object file: No such file or directory
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Two fixes for xtensa are still applicable to gdb-7.5.1, which is now the
default; copy them from 7.4.1. This fixes native gdb build for xtensa.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
jack2 uses Waf 1.6.11. The waf configure program combines a part of
python script with a compiled blob. According to Waf documentation,
waf currently supports python interpreter from version 2.3 to 3.1.
However, Buildroot provides python-3.4. So, let's uses host python2
interpreter for building jack2.
This patch also cleanup whitespace, replacing wrongly used spaces with
tabs.
Fixed:
http://autobuild.buildroot.net/results/913/913bb1836076be9f201bf6641c7614708d6916bc/
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The autobuilders are not able to build glibc on AArch64 since we moved
to the internal toolchain backend as the default for AArch64. The
reason is that the cross-ld segfaults while linking of the glibc
utilities. Unfortunately, the issue has so far been impossible to
reproduce outside of the autobuilder CI loop itself: even on the same
machine, in the same chroot, the issue does not appear.
Today, Will Newton helped me analyze a bit further the problem. In the
logs of the build machine, we have found that the following segfault
notification matched the dates of the autobuilder failures:
/var/log/syslog:May 15 10:39:20 sd-56966 kernel: [767023.832598] ld[6846]: segfault at 1b2c002 ip 00000000004caf80 sp 00007fffaa308df8 error 4 in ld[400000+1b9000]
/var/log/syslog.2.gz:May 13 07:58:24 sd-56966 kernel: [585094.434264] ld[17761]: segfault at 154b002 ip 00000000004caf80 sp 00007fff0d400168 error 4 in ld[400000+1b9000]
/var/log/syslog.3.gz:May 12 20:24:08 sd-56966 kernel: [543558.227915] ld[14841]: segfault at 2706002 ip 00000000004caf80 sp 00007fffc08d41c8 error 4 in ld[400000+1b9000]
/var/log/syslog.4.gz:May 11 19:51:59 sd-56966 kernel: [455484.523033] ld[50162]: segfault at 1f00002 ip 00000000004caf80 sp 00007fff14a02328 error 4 in ld[400000+1b9000]
/var/log/syslog.4.gz:May 12 05:13:37 sd-56966 kernel: [489085.120089] ld[32067]: segfault at 2430002 ip 00000000004caf80 sp 00007fffc448db48 error 4 in ld[400000+1b9000]
/var/log/syslog.6.gz:May 9 15:20:38 sd-56966 kernel: [266948.197141] ld[13483]: segfault at ff0002 ip 00000000004caf80 sp 00007fff7e4fe948 error 4 in ld[400000+1b9000]
/var/log/syslog.7.gz:May 8 16:45:08 sd-56966 kernel: [185853.688607] ld[1757]: segfault at 20b1002 ip 00000000004caf80 sp 00007fffd07d5ae8 error 4 in ld[400000+1b9000]
See
http://autobuild.buildroot.org/?reason=glibc-2.18-svnr23787&arch=aarch64
for the autobuilder results.
So, the segfault always happens while accessing an address 2 bytes
after the beginning of a page: it looks like a buffer overflow, which
gets triggered because the object is placed towards the end of the
previous page, and crosses over the next, unallocated page.
Moreover, we looked at the 0x4caf80 address in an AArch64 cross-ld
built by Buildroot, and it turns out that it is part of the
iterative_hash() function. This nicely correlates with the patch that
Will Newton had pointed in
http://lists.busybox.net/pipermail/buildroot/2014-May/095881.html as a
fix for invalid memory accesses reported by Valgrind in the AArch64
cross-ld, specifically around the same area of 'ld'.
Therefore, even though we have not been able to reproduce the issue
outside of the autobuilders, and cannot confirm that the patch is
fixing the issue, I propose to integrate this binutils patch into
Buildroot. It is anyway an upstream binutils patch, which fixes a real
problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The lsof Configure script builds a test program using the host toolchain to
test whether glibc is used. This test is broken in cross compilation
environment. Set LINUX_CLIB to avoid the test. This should give the correct
result even for non glibc toolchains, since all libc variants we support have
the netinet/tcp.h header.
Fixes:
http://autobuild.buildroot.net/results/a1f/a1f0572dbf968c21f70b35cefff7ef7a1d9a348a/
Cc: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit 6c5c08b854,
openpowerlink package is rebuilt at every make call because
.stamp_downloaded is missing in the build directory.[D
The culprit is OPENPOWERLINK_EXTRACT_CMDS that remove and
replace the build directory.
unzip extract a directory "openPOWERLINK-V1.08.4" and
Buildroot expect a directory "openpowerlink-V1.08.4"
It is easier to use git repository instead of zip archive and
avoids rename the directory openPOWERLINK to openpowerlink.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The test program any2ppm can run as daemon. This feature can be disabled
at compile time, if the required headers are not present. However the
support for fork() is not checked.
Fixes http://autobuild.buildroot.net/results/4f2/4f271d55d7060d412aa336cfc2da3be3538d3594/.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since libatomic_ops does not implement real atomic operations for
ARMv4 and ARMv5, libunwind must define AO_REQUIRE_CAS do indicate it
requires compare-and-swap operations, even if not available as real
atomic operations for the current architecture. In this case,
libatomic_ops will rely on emulated atomic operations, which also
require linking against libatomic_ops, which was until now not done by
libunwind.
This fixes the mysterious ltrace build issue:
http://autobuild.buildroot.org/results/e1b/e1b330abfa2d80f3f30bc3359428ea429c690eb8/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even though flann build system uses CMake, it always tries to build a
shared library, even if BUILD_SHARED_LIBS=OFF is passed. It could
probably be fixed in flann's CMakeLists.txt, but that's not really
worth the effort if upstream doesn't support it.
Therefore, we simply disallow the flann package in purely static
builds.
Fixes:
http://autobuild.buildroot.org/results/a4e/a4ec0e9f28cd12ce770718fb407bbb4dc93b528b/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The "_" symbol prefix added by the blackfin toolchain causes "undefined
symbol" build failures when the compiler is trying to link a binary
with libblas and/or liblapack.
This patch also disables clapack reverse dependencies: armadillo.
Fixes:
http://autobuild.buildroot.net/results/a28df0ba10803e6e54c2f8160bbd8190cba4d690/
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building crda on NIOS II triggers the infamous _gp linker issue. Since
nobody cared, let's disable this package on NIOS II for the moment.
Fixes:
http://autobuild.buildroot.net/results/272/272f18410e4855ab6b3bfd8a44243c1ebecf6abe/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cppcms uses some thread functions that are not available in certain
uClibc thread implementations. Even though a bit more restrictive than
necessary, adding a NPTL dependency is the easiest solution, and is
quite logical for a relatively large and complex package such as
cppcms.
Fixes:
http://autobuild.buildroot.net/results/a26/a26574419aacbea4140dfca1d503bcab599edd71/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building aiccu does not work on NIOS II due to the _gp problem, and
nobody is interested to fix it for now, so we simply disallow this
package. While we're at it, we propagate the AVR32 exclusion to the
comment.
Fixes:
http://autobuild.buildroot.net/results/786/7864cd5789a9f9b9f0603d738f4e63822d8469dd/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This fixes the following build error often seen during linux kernel
linking step with relaxation enabled:
dangerous relocation: call8: misaligned call target: (.text.unlikely+0x63)
Backported from: a35d5e823fdfe8a6e7e05ca8e3fb8bb5697335b1
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
SYSSTAT_MAKE_OPT is a string used to pass options to make, '+=' operator
doesn't have any special meaning inside it, so CFLAGS+=... is passed to
shell, overwriting previous CFLAGS value.
Replace CFLAGS+="..." with CFLAGS="$(TARGET_CFLAGS) ...".
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
EBTABLES_K64U32 is a string passed directly to the configure script,
'+=' operator doesn't have any special meaningi inside it, so
CFLAGS+=-DKERNEL_64_USERSPACE_32 is passed to shell, overwriting previous
CFLAGS value.
Replace CFLAGS+="-DKERNEL_64_USERSPACE_32" with -DKERNEL_64_USERSPACE_32
and pass CFLAGS="$(TARGET_CFLAGS) $(EBTABLES_K64U32)".
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
LIBCGROUP_CONF_ENV is a string used to pass environment variables to the
confgiure script, '+=' operator doesn't have any special meaning inside
it, so CFLAGS+=... is passed to shell, overwriting previous CFLAGS
value. Replace CFLAGS+="..." with CFLAGS="$(TARGET_CFLAGS) ...".
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
SQLCIPHER_CONF_ENV is a string used to pass environment variables to the
confgiure script, '+=' operator doesn't have any special meaning inside
it, so CFLAGS+=... is passed to shell, overwriting previous CFLAGS
value. Replace CFLAGS+="..." with CFLAGS="$(TARGET_CFLAGS) ...".
Fixes:
http://autobuild.buildroot.net/results/dbf/dbf947ad6442fa8e57201ffcc96871361bf39ad7/
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To speedup building disable ccmake because it's not needed by buildroot.
Also disabling ccmake get rid of the ncurses optional unspecified
dependency for the sake of reproducible builds.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Alexander Potashev <aspotashev@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The host-protobuf package can only build on certain architectures. For
example, host-protobuf does not build on PowerPC platforms, causing
build failures on the autobuilders. Since we don't really care about
build platforms other than x86 and x86-64, this commit restricts the
build of host-protobuf to these architectures only, even though if
technically it could build on ARM and MIPS.
Fixes:
http://autobuild.buildroot.org/results/9b9/9b9b20b0e4694b11425cdc2382650cdc2774e400/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The dependency is propagated to XBMC, even though XBMC currently
requires an (e)glibc toolchain, which always have dynamic library
support. This is just in case one day XBMC can be built against
uClibc.
Fixes:
http://autobuild.buildroot.org/results/3fa/3fae35ebcf14d6f38284d8318f61f9b99998794c/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The libmbus tarball is no longer available at
http://www.freescada.com/public-dist. Apparently, the new upstream is
at http://www.rscada.se/libmbus/ and tarballs are at
http://www.rscada.se/public-dist/. Without this patch, the current
download of libmbus-0.8.0.tar.gz downloads an HTML document with an
error, which cannot be extracted, obviously.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
radvd needs some C library definitions not available in old uClibc
versions. Since we don't care much about AVR32, we simply disallow the
radvd package on this architecture.
Fixes:
http://autobuild.buildroot.org/results/f03/f0367a30e8d772eb5e955a85b853ec3e43fe54b3/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
U-Boot v2014.04 introduced significant changes in its build infrastrcture.
Among things related to buildroot are:
1. Special new target ("tools-only") was added for building host tools alone
2. Tools cross-building for target is no longer possible with substitution of
HOSTxx with TARGETxx because host binaries won't be built. Instead we just set
CROSS_COMPILE and CROSS_BUILD_TOOLS variables.
3. Most of make targets now require U-Boot to be configured before building.
So for building generic "fw_printenv" we now need to make "env" target config-
independent.
4. HOSTCPPFLAGS are not used anywhere, so dropping
"uboot-tools-02-hostcflags-override-fix.patch"
Also due to lincese boilerplate change in sources
"uboot-tools-01-drop-configh-from-tools.patch" required subtle changes.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The "make freetype-patch" fails because does not found autogen.sh,
because autogen.sh available only for the configure stage.
To fix this add host-automake as a prerequisite to freetype-patch.
This change also fix the support to top-level parallel make.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
protobuf 2.5.0 adds an atomic operations implementation that is limited
to a few architectures only. mips64el and armeb don't work either.
Fixes (among others)
http://autobuild.buildroot.net/results/ae9fa612d0b6c9d593504206d5cedd480ad2547e/
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Allow stereo modes to be selected for output; enable NTSC output.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Undocumented changes (probably related to HDMI).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update the package to use patches that have been applied upstream and
update their status comment accordingly.
f_fsid checks have been fixed via upstream patch that allows the cache
to work properly on the result.
Builtin heimdal tools can be worked around via the --bundled-libraries
option to disable those components (even if they are not libraries it
can be done that way).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
