Also make sure that older kernels are not selected for ARC.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Initially, a "cp" was used for the one-time target skeleton
installation, and an "rsync" was used for the every-time overlay
skeleton installations. Then, the target skeleton install was
changed to also use rsync (1cd3f992fb).
Now there are two rsyncs, but with different filter specs, which
seems odd.
This patch adds --excludes to both invocations of rsync to make them
consistent, and removes the -u option from the initial target skeleton
installation.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Makes the code uniform with the post-build and post-image implementation
(which is slightly simpler and, presumably, more efficient).
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This also simplifies code by removing the ifneq/endif clauses.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This also simplifies code by removing the ifneq/endif clauses.
[Peter: drop extra space]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
olddefconfig is a new target available in kconfig that allows to take
an old .config file, and update it to the latest version of the code,
without being asked for questions: it automatically assumes the
default value for options whose value was not defined.
It for example allows to take a minimal defconfig, copy it as .config,
and do 'make olddefconfig' to get the full .config.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We already use the .root stamp file to remember if we have copied the
skeleton, so we can remove the /bin check.
Likewise, we should always have a TARGET_SKELETON (or explicitly error
out otherwise), so remove that check as well.
Finally, now that we're using rsync to do the copy, we might as well
use its exclude support instead of cleaning up unwanted files afterwards.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
An example is .init_enable_core, to enable coredumps in busybox
Signed-off-by: Tilman Keskinöz <arved@arved.at>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The ncurses build can become polluted by the user's TERMINFO
environment variable, causing the user's ~/.terminfo to be modified
and preventing the install from succeeding:
/bin/sh ./run_tic.sh
** Building terminfo database, please wait...
Running tic to install /home/nathanl/devel/buildroot.git/output/host/usr/i686-unknown-linux-gnu/sysroot/usr/share/emacs/24.0.97/etc/ ...
You may see messages regarding extended capabilities, e.g., AX.
These are extended terminal capabilities which are compiled
using
tic -x
If you have ncurses 4.2 applications, you should read the INSTALL
document, and install the terminfo without the -x option.
1562 entries written to /home/nathanl/.terminfo
** built new /home/nathanl/devel/buildroot.git/output/host/usr/i686-unknown-linux-gnu/sysroot/usr/share/emacs/24.0.97/etc/
installing std
installing stdcrt
installing vt100
installing vt300
make[2]: Leaving directory `/home/nathanl/devel/buildroot.git/output/build/ncurses-5.7/misc'
make[1]: Leaving directory `/home/nathanl/devel/buildroot.git/output/build/ncurses-5.7'
for i in $(find /home/nathanl/devel/buildroot.git/output/host/usr/i686-unknown-linux-gnu/sysroot/usr/lib* -name "*.la"); do cp -f $i $i~; /usr/bin/sed -i -e "s:\(['= ]\)/usr:\\1/home/nathanl/devel/buildroot.git/output/host/usr/i686-unknown-linux-gnu/sysroot/usr:g" $i; done
>>> ncurses 5.7 Installing to target
mkdir -p /home/nathanl/devel/buildroot.git/output/target/usr/lib
cp -dpf /home/nathanl/devel/buildroot.git/output/build/ncurses-5.7/lib/libncurses.so* /home/nathanl/devel/buildroot.git/output/target/usr/lib/
ln -snf /usr/share/terminfo /home/nathanl/devel/buildroot.git/output/target/usr/lib/terminfo
mkdir -p /home/nathanl/devel/buildroot.git/output/target/usr/share/terminfo/x
cp -dpf /home/nathanl/devel/buildroot.git/output/host/usr/i686-unknown-linux-gnu/sysroot/usr/share/terminfo/x/xterm /home/nathanl/devel/buildroot.git/output/target/usr/share/terminfo/x
cp: cannot stat `/home/nathanl/devel/buildroot.git/output/host/usr/i686-unknown-linux-gnu/sysroot/usr/share/terminfo/x/xterm': No such file or directory
make: *** [/home/nathanl/devel/buildroot.git/output/build/ncurses-5.7/.stamp_target_installed] Error 1
So unexport TERMINFO in the top-level Makefile.
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This makes it possible to put empty directories in the overlay.
Thanks to Aras Vaichas for pointing that out.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Just like we have a post-build script mechanism that gets executed
after the build of all packages but before the creation of the
filesystem images, let's introduce a post-image script mechanism, that
gets executed once all filesystem images have been generated.
This can for example be used to call a tool building a firmware image
from different images generated by Buildroot, or automatically extract
the tarball root filesystem image into some location exported by NFS,
or any other custom action.
[Peter: fix image script check]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Store BR2_DEFCONFIG in .config, and use it to update the original input
defconfig file after updating the configuration. When a config is
created by using the BR2_DEFCONFIG=... option, this is saved in the
.config file; later runs of savedefconfig will update that same location.
It is also possible to configure this place in the interactive
configuration.
The BR2_DEFCONFIG value itself is not saved into the generated
defconfig, since Kconfig considers it at its default. This is
intentional, to avoid hard-coding an absolute path in the defconfig.
It will anyway be set again when the defconfig is used with the
'make BR2_DEFCONFIG=... defconfig' command.
As a side-effect of this change, the *config options have been moved out
of the BR2_HAVE_DOT_CONFIG condition. This doesn't make any functional
difference, because the .config is still not read for the *config targets.
However, the defconfig and savedefconfig targets do need to include
.config now, which makes them slightly slower.
[Peter: slightly tweak help text]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The filesystem overlay is a tree that is copied over the target fs
after building everything - which is currently usually done in the
post-build script.
[Peter: don't ignore missing directories]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
- Use a more descriptive name, the same of the "toolchain" directory.
- Add missing dependencies to be able to successfully use the target
right after the configuration.
- Move to a better position.
- Documentation it in the help target.
- Use toolchain target in the world target
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: Markos Chandras <markos.chandras at imgtec.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout at mind.be>
Acked-by: Samuel Martin <s.martin49 at gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Eclipse plugin at
https://github.com/mbats/eclipse-buildroot-toolchain-plugin allows
users of Eclipse to easily use the toolchain available in
Buildroot. To do so, this plugin reads
~/.buildroot-eclipse.toolchains, which contains the list of Buildroot
toolchains available on the system, and then offer those toolchains to
compile Eclipse projects.
In order to interface with this plugin, this commit adds an option
that allows the user to tell whether (s)he wants the Buildroot project
toolchain to be visible under this Eclipse plugin. It simply adds a
line in this ~/.buildroot-eclipse.toolchains file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Several projects use the kernel style O=<dir> syntax to build out of tree,
and atleast uClibc doesn't check that it was explictly passed on the command
line, so setting it in the environment breaks the build.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Support scripts (in support/) may need to parse the .config file, so give
them an easy access to it, by exporting BUILDROOT_CONFIG with the fully-
qualified path to .config.
Also, post-build scripts may need to reference a few locations, so export
those, too.
Note: we export both O and BASE_DIR. Although they are the same, BASE_DIR
is used internally, while O is used on the command line, which makes it a
bit ambiguous to know which to use. As users use O= on the command line,
they will probably tend to use that in their post-build scripts.
Update doc accordingly.
[Peter: fixed typo]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If this is not done then pkg-config can get confused.
Thomas and Arnout really deserve the credit for this - I just did
the testing.
Signed-off-by: Charles Manning <cdhmanning@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The legacy BR2_PACKAGE_* options in Config.in.legacy are not supposed to
be user selectable, so {rand,allyes}packageconfig shouldn't enable them.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Strip libthread_db the same as any other library, but strip libpthread
with --strip-debug. See the relevant mailing list discussion [1] for
additional details.
[1] http://lists.busybox.net/pipermail/buildroot/2012-October/060126.html
Signed-off-by: Richard Braun <rbraun@sceen.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As discussed in the BR developer days, we want to be more strict about API
changes in buildroot. I.e., we want to make it less likely that a user's
customizations break down after upgrading buildroot.
A first step is to make sure that the user is warned about API changes.
This patch introduces Makefile.legacy and Config.in.legacy, which will
issue clear error messages for such situations.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Using severals post build scripts is usefull to share
script between severals boards/projects.
[Peter: fix trailing spaces in Config.in]
Signed-off-by: Philippe Reynes <philippe.reynes@sagemcom.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A very common mistake done by our users is that they use
output/target/ directory as their root filesystem. Even though this is
loudly documented in our Buildroot manual, people don't read
documentation, so it is not sufficient.
This patch adds a text file named
output/target/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM which explains why
output/target isn't appropriate to use as the root filesystem. The
process is:
* At the beginning of the build, right after the skeleton has been
copied, support/misc/target-dir-warning.txt is copied to
output/target/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM
* In the filesystem images creation code, this file is removed before
launching fakeroot, and restored right after that, so that this
file is not present in the generated root filesystem images.
Note that the file has not been added to the default skeleton for two
reasons:
* It would have annoying to have in our source tree a file named in
capital letters inside system/skeleton/
* The proposed way works even if the user uses a custom skeleton.
[Peter: fixed typo]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Juha Lumme <juha.lumme@gmail.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This directory groups the following elements:
* the default root filesystem skeleton
* the default device tables
* the Config.in options for system configuration (UART port for
getty, system hostname, etc.)
* the make rules to apply the system configuration options
Even though the skeleton and device tables could have lived in fs/, it
would have been strange to have the UART, system hostname and other
related options into fs/. A new system/ directory makes more sense.
As a consequence, this patch also removes target/Makefile.in, which
has become useless in the process.
[Peter: fixup TARGET_SKELETON settings / documentation to match]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The architecture tuple is 'aarch64', but the kernel people decided to
call it 'arm64', so we have to do some mungling to get the kernel
architecture name from the Buildroot architecture name.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The pkgconfig files are located in /usr/lib/pkgconfig
and /usr/share/pkgconfig directories.
However, only /usr/lib/pkgconfig is removed when no
development files are needed in the target filesystem.
Remove pkgconfig directory from $(TARGET_DIR)/usr/share
as well if BR2_HAVE_DEVFILES is not set.
Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As stated in commit 555c2585bf, the
Xtensa architecture has been introduced in 2009 and never changed
since its initial introduction. It requires some special handling that
is a bit annoying, and despite our call to the initial developers, and
the announcement of the deprecation of the architecture during the
2012.05, nothing has happened. Therefore, drop support for this
architecture.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: me
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Building QT might fail if QMAKESPEC is defined.
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This will allow to install binary package only if they are supported by the
host. As example Atmel SAM-BA (x86 only).
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This allows to automatically collect material that may be needed to comply with
the license of packages that Buildroot prepares for the target device.
The core of the implementation is made by the following parts:
- in package/pkg-utils.mk some helper functions are defined for common actions
such as generating a warning, producing info about a package etc;
- in package/pkg-gentargets.mk, within the GENTARGETS framework, a new
<PKG>-legal-info target produces all the info for a given package;
- Makefile implements the top-level targets:
- legal-info-prepare creates the output directory and produces legal info
about Buildroot itself and the toolchain, which mostly means just warning
the user that this is not implemented;
- legal-info, the only target that is supposed to be used directly, depends
on all of the above and finishes things by producing the README files from
the various pieces.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Having DESTDIR defined will confuse the build of certain packages, so
we ensure that it is undefined from the environment when Buildroot
starts.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If PKG_CONFIG_PATH is set in the environment, it allows pkg-config to
look for libraries outside of the buildroot tree. This is a problem
both for host and target builds. To avoid it, globally set an empty
PKG_CONFIG_PATH in the environment.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The original 'source-check' target first selects all packages, and then checks
whether the package tarballs can be found. This is useful for Buildroot
maintainers, but less useful for developers working on a specific project. The
latter only care about the packages used in that project.
This patch removes the allyesconfig dependency to source-check so that only
selected packages are checked. The original behavior is moved to a new target
'source-check-all'.
[Peter: removed source-check-all, people can just make allyesconfig before]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Sometimes it may be desirable to keep debug symbols for some binaries and
libraries on the target. This commit introduces the config option
BR2_STRIP_EXCLUDE_FILES, which is interpreted as a list of such binaries
and libraries, and the option BR2_STRIP_EXCLUDE_DIRS, which indicates
directories excluded from stripping entirely.
These exclusions are passed to the find command in the target-finalize step.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The existing ccache infrastructure sets the cache directory hardcoded in the
ccache binary. As this directory was set to ~/.buildroot-ccache, the cache
is not necessarily local (e.g. in corporate environments the home directories
may be mounted over NFS.)
Previous versions of buildroot did allow to set the cache directory, but this
was also hardcoded (so you had to rebuild ccache to change it), plus that
support was removed.
See http://lists.busybox.net/pipermail/buildroot/2011-July/044511.html for
a discussion on this.
This patch modifies ccache to respect a new shell variable (exported from
the Makefile, based on a configuration option) instead of CCACHE_DIR.
The name CCACHE_DIR itself is already used by autotargets for the ccache
package.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In order to use locale support on a Linux system, you need locale data
to be present:
* on a (e)glibc based system, this data is typically in the
/usr/lib/locale/locale-archive file, which can be created and
extended using the localedef program
* on an uClibc based system, the set of supported locales is defined
at build time by an uClibc configuration option.
This patch implements generating locale data for the following cases:
* Internal toolchain
* External toolchain based on (e)glibc. uClibc external toolchains
are not supported, because with uClibc, the set of supported
locales is defined at build time. CodeSourcery and Linaro
toolchains have been tested, Crosstool-NG toolchains are believed
to work properly as well.
* Toolchains built using the Crosstool-NG backend, but only (e)glibc
toolchains.
This feature was runtime tested with internal uClibc toolchain,
CodeSourcery ARM toolchain and Linaro ARM toolchain, thanks to a
simple C program that shows the data and a gettext translated message.
Note that this option differs from the "purge locales" option, which
is responsible for removing translation files and other locale stuff
installed by packages. At some point in the future, we may want to
clarify the respective roles of those options.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
So that this works:
% make defconfig BR2_DEFCONFIG=~/buildroot-defconfig
Right now we have to do:
% cp ~/buildroot-defconfig configs/buildroot_defconfig
% make buildroot_defconfig
That would dirty the buildroot tree and requires it to be writable.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Re-integrate in gcc-uclibc-4.x.mk things from
toolchain/gcc/Makefile.in that were completely gcc-specific. There was
no reason to pull that when building with other backends than the
internal one.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This also requires moving a few include directives below the "all:"
target in the main Makefile, otherwise the new target to create the
toolchain file in pkg-cmaketargets.mk gets used as the default make
target instead of "all:".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
There used to be a mechanism using which packages could leave a
.fakeroot.<something> file which could contain commands to be executed
within the fakeroot environment. Since this mechanism is no longer
used by any package, remove it from the common infrastructure.
The latest user was nfs-utils, which used this mechanism to do the
"make install" as root, since doing otherwise was not supported. But
since 16e7b8255c, nfs-utils has been
upgraded and converted to the package infrastructure, and this hack is
no longer necessary. Another past user was the ltp-testsuite package,
for the same reason, and since
a72a670489, the fakeroot hack is no
longer needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The only variable that is used is HOST_LOADLIBES, defined for the
cygwin case in the kconfig build. Since we don't support cygwin,
simply get rid of this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since these two special make targets are very useful but not yet
mentioned in the documentation I added them to the make help and
the manual.
Signed-off-by: Stephan Hoffmann <sho@reLinux.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It's convenient to have a target to print the buildroot version, for use
in external scripts calling buildroot.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
/etc/os-release is becoming a standard interface for distribution
name/version info, so let's use that instead of the nonstandard
/etc/br-version. Format of the file is something like:
NAME=Buildroot
VERSION=2012.02-rc1-00003-g2d10e81
ID=buildroot
VERSION_ID=2012.02-rc1
PRETTY_NAME="Buildroot 2012.02-rc1"
For more details, see:
http://0pointer.de/public/systemd-man/os-release.html
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If during the dependencies step, a package needs to be downloaded, the
download directory already has to be present. If not, the file will be
downloaded under the name 'dl' instead of in the directory 'dl'.
This patch changes the order of dirs and dependencies in the world target to
fix this.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Although support/dependencies/dependencies.sh checks for the version of make,
this script doesn't get a chance to run if make encounters a syntax error as a
result of being too old.
For example, the following syntax is only supported from make 3.81 onwards:
ifeq ($(BR2_TOOLCHAIN_BUILDROOT),y)
include toolchain/toolchain-buildroot.mk
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL),y)
include toolchain/toolchain-external.mk
else ifeq ($(BR2_TOOLCHAIN_CTNG),y)
include toolchain/toolchain-crosstool-ng.mk
endif
This patch adds a check for the version of make very early in the Makefile, so
that old make versions are handled gracefully.
[Peter: simplify check]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As suggested by Arnout Vandecappelle, move toolchain/dependencies to
support/dependencies, as it really is not toolchain-specific anymore.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes lib/lib64 issue when building on OpenSUSE.
Reported-by: Guillaume Gardet <guillaume.gardet@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also add a clean target, give absolute path to a2x, add a dependency
on the output file, and add to .PHONY.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Peter: build in docs/manual/<format>, fix clean targets]
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Special thanks for Yann E. Morin for giving input and suggestions to
implement this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[Peter: skip double mention of manual target in make help]
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The user can now create a custom local override file to override the
source directory for various packages.
An example override file:
ZLIB_OVERRIDE_SRCDIR = /tmp/zlib
STRACE_OVERRIDE_SRCDIR = /opt/strace-4.5.20
would tell Buildroot to use the zlib and strace source code from the
specified directories, instead of download, extracting and patching
the code has done usually by Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The CONFIG_UPDATE macro is no longer defined in
package/gnuconfig/gnuconfig.mk, but instead in
package/Makefile.autotools.in. It it also changed a little bit to take
the directory of the package sources as argument, and the AUTOTARGETS
infrastructure is updated to use this macro.
[Peter: drop echo in CONFIG_UPDATE]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: only activate if barebox is enabled, fix deps]
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>