Signed-off-by: Jianhui zhao <zhaojh329@gmail.com>
[Thomas:
- add entry in DEVELOPERS file
- be more explicit with SSL options
- drop logic around luainterpreter since luajit is not properly
detected]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
jbig2dec is a decoder implementation of the JBIG2 image compression format.
Signed-off-by: Raphaël Mélotte <raphael.melotte@essensium.com>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since spice ver. 0.12.6 doesn't depend on cegui anymore
let's bump to the latest stable version and rename package.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This initial support includes:
Linux 5.4
U-Boot 2020.01
Arm Trusted Firmware v2.2
Buildroot default packages.
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A number of AArch64 platforms need to build some bits of ARM32 code,
for example in TF-A (ARM Trusted Firmware) or other
firmware/bootloader.
This package allows to get a pre-built cross-compilation toolchain to
build bare-metal ARM32 code.
https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-a/downloads
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
[Thomas:
- drop empty LICENSE_FILES
- use VERSION variable in SITE variable
- simplify symlink creation
- drop visible Config.in.host option]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This reverts commit 25033cfb86.
This perl package is deprecated and gives following recommendations while
building:
*** THIS IS NOT AN ERROR, JUST A MESSAGE FOR YOUR INFORMATION ***
Do you really need Crypt::SSLeay?
Starting with version 6.02 of LWP, https support was unbundled into
LWP::Protocol::https. This module specifies as one of its prerequisites
IO::Socket::SSL which is automatically used by LWP::UserAgent unless
this preference is overridden separately. IO::Socket::SSL is a more
complete implementation, and, crucially, it allows hostname
verification. Crypt::SSLeay does not support this. At this point,
Crypt::SSLeay is maintained to support existing software that already
depends on it.
However, it is possible that your software does not really depend on
Crypt::SSLeay, only on the ability of LWP::UserAgent class to
communicate with sites over SSL/TLS.
If are using version LWP 6.02 or later, and therefore have installed
LWP::Protocol::https and its dependencies, and do not explicitly use
Net::SSL before loading LWP::UserAgent, or override the default socket
class, you are probably using IO::Socket::SSL and do not really need
Crypt::SSLeay.
Before installing Crypt::SSLeay, you may want to try specifying a
dependency on LWP::Protocol::https.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Always use the --disable-dbengine configuration option, because we do
not support libjudy dependency that is required otherwise.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package contains a single module, which implements
a platform independent file lock in Python, which provides
a simple way of inter-process communication.
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A simple interface to SFTP. The module offers high level
abstractions and task based routines to handle your SFTP
needs.
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
[Thomas:
- add entry in DEVELOPERS file
- add -DRTTY_SSL_SUPPORT=OFF to explicitly disable SSL support
- fix license file name in the hash file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This test case runs a simple pipeline for 100 frames to ensure that
gst1-python works properly.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
GStreamer Python binding overrides.
This package also includes a simple upstream patch that fixes building against
python-3.8.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr:
- fix libpython-dir as noticed by Adam
- rewrap a comment
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This package is needed with Freescale i.MX8/i.MX8X defconfigs
version equal to 4.19.35_1.0.0
It is also subject to multi-version support.
The package version aligned with NXP BSP 4.19.35_1.1.0 is 2.3.1
Signed-off-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
Reviewed-by: Julien Olivain <julien.olivain@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The board support package includes the following components:
- U-Boot 2020.01
- Linux 5.4.26
- Buildroot default packages
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds EROFS userspace tool erofs-utils to buildroot,
which can be used to generate EROFS images.
Signed-off-by: Gao Xiang <hsiangkao@aol.com>
[yann.morin.1998@free.fr:
- add explicit --enable-lz4
- explain why autoreconf
- add DEVELOPPER entry
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tinyproxy is a small, efficient HTTP/SSL proxy daemon.
https://tinyproxy.github.io
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This file was created by utils/scancpan while adding other packages but
apparently not yet added in the repo.
Assign this test case to Bernd in the DEVELOPERS file since he is
listed as the maintainer for this package.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added via utils/scancpan, adding a host dependency to perl-try-tiny and
target dependency to openssl.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Dependency for perl-crypt-ssleay (added in a subsequent commit)
Added via utils/scancpan, without changes.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Dependency for perl-crypt-ssleay (added in subsequent commit).
Added via utils/scancpan, without changes.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a dependency for perl-lwp-protocol-https (added in a subsequent
patch).
Added via utils/scancpan, updating license only.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Note: even though the Chart.js developers make specific tarballs on GitHub
(i.e. not simply 'source code' tarballs), they cannot be used in Buildroot
because their names do not encode a version number, e.g. 'Chart.js.zip'.
This means that on upgrades, the same tarball name would have different
contents and thus a different hash.
Signed-off-by: Joeri Barbarien <joeri.barbarien@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added via utils/scancpan, without changes.
Signed-off-by: Joeri Barbarien <joeri.barbarien@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added via utils/scancpan, adding README.pod as license file and updating
license to Artistic-2.0.
Note that the license declared in META.{json,yml} ('perl') would mean either
Artistic or GPL-1.0, while the README.pod file only talks about
Artistic-2.0. Assume the author means the latter one.
Signed-off-by: Joeri Barbarien <joeri.barbarien@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added via utils/scancpan, without changes.
Signed-off-by: Joeri Barbarien <joeri.barbarien@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added via utils/scancpan, but removing the 'suspicious' dependency on
'host-perl-mojolicious'.
During configuration, the package warns:
Checking prerequisites...
requires:
! Mojo::Base is not installed
build_requires:
! Mojolicious::Lite is not installed
! Test::Mojo is not installed
ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions
of the modules indicated above before proceeding with this installation
Run 'Build installdeps' to install missing prerequisites.
But the build and installation continues correctly nonetheless.
Signed-off-by: Joeri Barbarien <joeri.barbarien@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added via utils/scancpan, without changes.
Signed-off-by: Joeri Barbarien <joeri.barbarien@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a dependency of perl-i18n added in a subsequent patch.
Added via utils/scancpan, without changes.
Signed-off-by: Joeri Barbarien <joeri.barbarien@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Other changes:
- Convert the package to a meson package.
- Remove 0001-add-PYTHON_INCLUDES-override.patch as it no longer applies.
- Add gobject-introspection as a dependency.
- Add the package under myself in the DEVELOPERS file.
Because gobject-introspection is now a dependency of python-gobject, the test
must be updated at the same time.
- Change TestPythonPy2Gobject to TestPythonPy3Gobject as
gobject-introspection requires python3.
- Refactor test_python_gobject.py to no longer inherit the
TestPythonPackageBase class, as this class uses a base config that does not
support gobject-introspection.
- Update sample_python_gobject to use Glib to find the path of sh.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Belr is Belledonne Communications' language recognition library, written
in C++11. It parses text inputs formatted according to a language
defined by an ABNF grammar, such as the protocols standardized at IETF.
https://gitlab.linphone.org/BC/public/belr
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Belle-sip is a modern library implementing SIP (RFC 3261) transport,
transaction and dialog layers.
http://www.linphone.org/technical-corner/belle-sip
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: select mbedtls as support for crypto is needed in bctoolbox]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BearSSL is an implementation of the SSL/TLS protocol (RFC 5246) written
in C
https://bearssl.org
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Gentoo scripts to initialize udev via openrc, to be used by eudev.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
[yann.morin.1998@free.fr: fix commit title]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
GObject introspection is a middleware layer between C
libraries (using GObject) and language bindings. The C library
can be scanned at compile time and generate a metadata file,
in addition to the actual native C library. Then at runtime,
language bindings can read this metadata and automatically
provide bindings to call into the C library.
There's an XML format called GIR used by GObject-Introspection.
The purpose of it is to provide a standard structure to access the complete
available API that a library or other unit of code exports. It's
language-agnostic using namespaces to separate core, language, or
library-specific functionality.
Cross-compiling gobject-introspection is not an easy task. The main issue is
that in the process of creating the XML files, gobject-introspection must first
run and scan the binary, which, if the binary is cross-compiled, would not
typically be possible from the host system.
Because of this limitation, we use several wrappers to call instead first out
qemu, which runs the native scanner to create the binaries.
There are seven total patches and four different wrapper files needed to
successfully cross-compile and run this package, many of them are from
open-embedded, but one of them is of my own doing.
1) Revert a previous, incomplete attempt at adding cross-compiling support.
2) Add support for cross-compiling with meson.
3) Disable tests.
4) Add an option to use a binary wrapper; this patch will force giscanner to
use a wrapper executable to run binaries it's producing, instead of
attempting to run them from the host.
5) Add an option to use an LDD wrapper, again, useful for cross-compiled
environments.
6) Add a --lib-dirs-envar option to pass to giscanner. (See patch for details.)
7) Add rpath-links to ccompiler: when passing the PACKAGE_GIR_EXTRA_LIBS_PATH
to the ccompiler.py script, ccompiler.py needs to add -Wl,-rpath-link to the
environment for the package to correctly link against the passed on paths.
8) Ignore error return codes from ldd-wrapper because prelink-rtld returns 127
when it can't find a library, which breaks subprocess.check_output().
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr:
- host-prelink-cross has no Kconfig entry
- reorder dependencies for arch deps first
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Prelink-cross emulates a runtime linker for a given sysroot. This is
necessary to allow gobject-introspection to build its typelib files
during cross-compiling.
We're using a sha1 on the cross_prelink branch, as we need the
RTLD-enabled variant of prelink-cross.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr:
- drop HOST_ prefix for inherited variables
- fix licensing info to "or-later"
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Some packages, like prelink-cross, want to use libiberty but do not bundle
their own instance (which is good!).
However, libiberty is made for being bundled in packages: all GNU
packages that use libiberty (gcc, Binutils, gdb, et al...) all have their own
bundled variant. This common practice means that there is no official upstream
for libiberty, the closest being as part of the combined Binutils-gdb tree.
So we introduce a new host-only package, that installs just libiberty from a
Binutils released tarball.
Again, as packages usually bundle libiberty, it usually only installs a static
version. Furthermore, it does not obey the usual --enable-shared and
--disable-static flags; it only ever builds a static version.
Furthermore, -fPIC is not used with this library, but some packages may pick it
to build shared objects. This behavior is the case for host-gdb, for example,
which accidentally picks that library instead of its internal one.
So, rather than fix the various gdb versions and variants we can use, we ensure
that the libiberty we install is usable in shared objects, and we always build
before host-gdb.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr:
- fix DL_SUBDIR for a host-only package
- add licensing info
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
openFPGALoader is a tool for programming FPGA.
Signed-off-by: Jean Burgat <jeanburgat33@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The first time I worked on the Buildroot's toolchain infra
was to add support for the Sourcery Codebench Standard
(licenced) edition toolchain (from Mentor Graphics) for
x86 target [1]. The series was rejected though.
But the knowledge gained from this work served to refactor
the toolchain-external infra in Buildroot [2].
Nowadays, I'm using toolchains-builder project to do
some toolchain build testing to keep GNU tools up to date
in Buildroot.
[1] http://lists.busybox.net/pipermail/buildroot/2014-November/112036.html
[2] http://lists.busybox.net/pipermail/buildroot/2016-October/175433.html
[3] https://gitlab.com/kubu93/toolchains-builder/
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
