This commit doesn't touch infra packages.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump libglib2 to version 2.42.0 and remove obsolete patches.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A lot of packages ignored BR2_ENABLE_DEBUG. This patch simplifies the handling of
this option by adding the corresponding configure option to the global Makefile
for target packages.
For host packages --disable-debug is added to the global Makefile.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_CONF_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_INSTALL_STAGING_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_INSTALL_STAGING_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove patch because it is applied upstream in this version.
Signed-off-by: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit removes all remaining references to uClibc 0.9.32.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since <PKG>_VARIABLE_MINOR variable in some packages is used only once,
so it is unusable. This patch removes it.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libglib2 can fail to build for arm, with the following error.
gatomic.c:668:2: error: #error G_ATOMIC_LOCK_FREE defined, but incapable of lock-free atomics.
The following upstream commit fixes the problem.
commit 996edb0c46356d8a326f886b91a77a6af9a2de3e
Author: Antoine Jacoutot <antoine@mtier.org>
Date: Wed Aug 28 09:35:27 2013 +0200
fix atomic ops detection
AC_TRY_LINK should be used instead of AC_TRY_COMPILE because the code
will compile everywhere, either producing ``atomic'' code, or an
external reference to __sync_bool_compare_and_swap.
https://bugzilla.gnome.org/show_bug.cgi?id=706958
The upstream commit went into version 2.37.7, so this is the lowest version
that we can bump to, in order to fix the atomic operations problem. However,
2.37.x is a development version, so we bump to 2.38.2 instead.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch reinstates support for uClibc version 0.9.31, which was removed
from Buildroot in commit 8abb5b33c1
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In order to avoid the work of converting the toolchain-crosstool-ng
logic to the package infrastructure, we remove it from Buildroot,
since it has been deprecated since quite some time.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since 97c687000 (pkg-autotools.mk: default host AUTORECONF{,_OPT} to the
target values) we automatically enable autoreconf for host builds if it
is enabled for the target, so these can go.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This finally removes the BR2_HAVE_DEVFILES option, that was used to
install/keep development files on target. With the recent migration of
the internal backend to the package infrastructure, we had anyway lost
the ability to build gcc for the target, and install the uClibc
development files on the target.
[Peter: also remove support/scripts/copy.sh]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch bumps libglib2 to version 2.36.1. In addition this bumps glibmm
and glib-networking to 2.36.1.
Signed-off-by: Spenser Gilliland <spenser at gillilanding.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libglib2 requires msgfmt, which is now provided by host-gettext since
gettext will no longer be part of the mandatory dependencies.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
By default, glib builds its own internal copy of the pcre library, but
it also allows to use the one available from the system. Use this
possibility when pcre is already selected in the Buildroot
configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add a patch that provides an additional --disable-tests option to the
configure script.
Disabling the build of tests has two benefits:
* Prevents the build of a lot of code that doesn't build on noMMU
platforms.
* Reduces the build time.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Finally get rid of all := used for variable definitions in packages,
as we suggest in our manual and during the review of new packages.
While I was at it, I also sometimes added a few missing new lines
between the header and the first variable definition.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If GLib is cross-compiled, the default printf settings that it selects are wrong
for glibc. This leads to issues with the g_print() functions, e.g. "Aborted"
errors returned by gst-inspect.
This patch fixes this issue by setting printf configuration options compatible
with glibc. These options should also be compatible with uClibc.
This solution has been suggested for LTIB by Rogerio Nunes:
https://community.freescale.com/thread/302734
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We really only need the host build of libglib2 for a few helper
programs that are used for the target build of libglib2. Therefore,
trying to use bells and whistles like DTrace, GCov and SystemTap is
totally useless.
And it is actually harmful, since it is causing build failures on the
gcc110 PowerPC-based autobuilder that apparently has some
DTrace-feature installed. This commit therefore fixes:
http://autobuild.buildroot.org/results/1c62d1ce10937bd21f5afcb73782b939d10c2038/build-end.log
Which has been polluting our autobuilder logs since several weeks now.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
From now on, packages only need to select the BR2_PACKAGE_GETTEXT
option and depend on the 'gettext' package to get the necessary i18n
libraries installed on the target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: remove BR2_PACKAGE_LIBINTL]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
CC: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
qsort_r was only added in uClibc 0.9.33, so only enable it when we're sure
it's available. For external/ctng toolchains we cannot easily know, so
simply disable it there.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update to latest stable release and add a dependency on libffi which
is needed by GObject.
[Peter: fixup build on uClibc]
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thanks to the pkgparentdir and pkgname functions, we can rewrite the
AUTOTARGETS macro in a way that avoids the need for each package to
repeat its name and the directory in which it is present.
[Peter: pkgdir->pkgparentdir]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that those values are passed at the autotools infrastructure
level, there's no need for every package to pass inconsistent values.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The patch libglib2-mkenums-nowarn.patch is removed, since it has been
merged upstream.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we have libtool-2.2.x patch support, we can get rid of a bunch
of _LIBTOOL_PATH = NO, fixing (potential) cross link issues.
Notice: php not changed, as it uses a very old 1.5 version for the
embedded sqlite, where our buildroot-libtool-v1.5.patch doesn't apply.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch was introduced in 0ec4298153
to fix a problem in libglib configure script when using the
configuration cache.
However, we decided that the shared configuration cache cannot work
reliably, to disable it by default, and probably to remove it
altogether. So just drop this patch, and don't autoreconfigure
libglib.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The test for clock_gettime() in configure.in doesn't work properly
when a previous package has loaded the shared configuration cache with
informations about the availability of clock_gettime. A package such
as ctorrent does so, which means that compiling ctorrent *then*
libglib2 currently fails.
According to people on the Autoconf mailing list, the libglib2 test is
likely the one that needs to be fixed. The problem is that the
AC_CHECK_FUNCS() test assumes that if it finds clock_gettime() it
means that there's no need to add any -lrt flag to the
build. Unfortunately, due to the shared configuration cache, this test
is already done with -lrt, so the test succeeds, and libglib2 does not
know that it needs to add -lrt to G_THREAD_LIBS and
G_THREAD_LIBS_FOR_GTHREAD.
So instead, we remplace the test with an AC_SEARCH_LIBS() test,
followed by a test on the result of this AC_SEARCH_LIBS() test to add
the necessary -lrt to G_THREAD_LIBS and
G_THREAD_LIBS_FOR_GTHREAD. Therefore, even if the result for the
AC_SEARCH_LIBS() test is cached due to the prior execution ctorrent
./configure script, libglib2 ./configure will properly add -lrt to the
appropriate variables.
Obviously, as this patch modifies the configure.in file, we enable the
autoreconf step for the libglib2 package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* Don't install libglib2 development binaries and to target unless
BR2_HAVE_DEVFILES is set
Signed-off-by: Malte Starostik <m-starostik@versanet.de>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
