This package has been marked as broken since 2010. No need for legacy
handling.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package has been marked as broken since 2010. No need for legacy
handling.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This option has been marked as broken since 2016.08. Since nobody
repaired it, we'll just remove it.
Since technically it was already removed in 2016.08, it's added to the
2016.08 section of the legacy menu.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Gustavo Sverzut Barbieri <barbieri@profusion.mobi>
Reviewed-By: Gustavo Sverzut Barbieri <barbieri@profusion.mobi>
Acked-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libaio has support for powerpc64(le), so enable the corresponding
package on those architectures.
Signed-off-by: Daniel Black <daniel.black@au.ibm.com>
Acked-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Like ARM, BR2_ARCH doesn't correspond to the uname -m. With cmake
CMAKE_SYSTEM_PROCESSOR is expected to contain the uname -m value.
So we change CMAKE_SYSTEM_PROCESSOR from powerpc64 -> ppc64 (big endian)
and powerpc64le -> ppc64le (little endian).
This corrects the cross compile to the powerpc64{,le} target
architecture for the mariadb (and possibly others) packages that
use the CMAKE_SYSTEM_PROCESSOR variable and compare it against
Power64 based architectures.
Signed-off-by: Daniel Black <daniel.black@au.ibm.com>
Acked-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
lighttpd server runs cgi application that has no way to get environment
variables that are set up for it.
S50lighttpd is changed to source /etc/default/lighttpd file where these
environment variables can be set up.
Signed-off-by: Philipp Skadorov <philipp.skadorov@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
S50lighttpd contains repeating keywords that are worth carrying out as
variables: pid file name, daemon name, config file name.
Signed-off-by: Philipp Skadorov <philipp.skadorov@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
firejail depends on !uClibc, so the "firejail needs !uClibc" comment
should be displayed when we do have uClibc. Right now the logic is just
the other way around, so flip it.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Firejail Security Sandbox
https://firejail.wordpress.com/
Lightweight application sandboxing system using seccomp and kernel
namespaces.
Signed-off-by: Chris Frederick <cdf123@cdf123.net>
[Thomas:
- Fix DEVELOPERS entry: use <> around the e-mail address instead of ()
- firejail builds fine with musl, so only exclude uclibc, which fails
to build with EM_ARM undeclared
- Update to upstream version 0.9.44.8.
- Remove FIREJAIL_MAKE_OPTS, as suggested by Romain Naour.
- Pass --enable-busybox-workaround only if Busybox is enabled, as
suggested by Romain Naour.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As announced by Rob Clark at:
https://lists.freedesktop.org/archives/mesa-dev/2017-February/145745.html
, the kmscube repository has been moved from github to freedesktop.org,
so change it to the new location.
With the newest code the local patch for adding imx-drm support
is no longer needed.
Also, on imx6q we need to explicitily pass the card device now:
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We have decided that lua packages should have a name that starts with
lua (like is the case for python and perl). However, we're not going to
rename all the existing lua packages that don't start with lua. This
makes it unclear for people adding packages how they should name the
package, so add a comment to package/Config.in to explain it.
It's rather terse but it gets the message across.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The location at ftp.csx.cam.ac.uk only stores 2 latest versions of PCRE.
This results in old (2015.11 and older currently) buildroot versions
timing out on wget several times and having to retrieve the package
from sources.buildroot.org afterwards.
Signed-off-by: Oleg Kitain <okitain@ya.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit bf1c9828f2.
This commit was part of the Kodi 17 series and was committed too early,
current Kodi 16 is incompatible with this bump and needs to be
reverted, fixes https://bugs.busybox.net/show_bug.cgi?id=9711
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 2ac3045453.
This commit was part of the Kodi 17 series and was committed too early,
current Kodi 16 is incompatible with this bump and needs to be
reverted, fixes https://bugs.busybox.net/show_bug.cgi?id=9711
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update test-disabling patch for new version, and git format it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
GNUTLS-SA-2017-3A - Addressed integer overflow resulting to invalid
memory write in OpenPGP certificate parsing.
GNUTLS-SA-2017-3B - Addressed crashes in OpenPGP certificate parsing,
related to private key parser. No longer allow OpenPGP certificates
(public keys) to contain private key sub-packets.
GNUTLS-SA-2017-3C - Addressed large allocation in OpenPGP certificate
parsing, that could lead in out-of-memory condition.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes a buffer-overrun in Bengali.
Switch to https URL to avoid a small delay in protocol redirection.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit cherry-picks an upstream patch that fixes a compile error
that was introduced in v2.1.1
Signed-off-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for kmscube application, which is helpful for testing
kms/drm drivers.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Include the --disable-dependency-tracking option in <pkg>_CONFIGURE_CMDS
only on the condition that <pkg>_OVERRIDE_SRCDIR is empty. Dependency
tracking is very welcome while developing in order to properly rebuild
when calling make <pkg>-rebuild for instance.
Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr>
GTest version 1.8.0 includes gmock so merge both packages inside gtest
In this merge:
- Add gmock as a suboption of gtest (BR2_PACKAGE_GTEST_GMOCK)
following advice from Arnout Vandecappelle
- Add BR2_PACKAGE_GMOCK as a legacy entry, selecting BR2_PACKAGE_GTEST
and BR2_PACKAGE_GTEST_GMOCK.
- Use cmake to install libraries and headers and add missing files
(gtest.pc, gtest-config, gmock.pc) in
GTEST_POST_INSTALL_STAGING_HOOKS instead of redefining
GTEST_INSTALL_STAGING_CMDS
- Remove patch on Python as gmock/gtest now supports python 3.0
(commit 456fc2b5c4e9ebf05a5987dfe1ff0ac9ffeb53cc)
- Add the correct license in HOST_GTEST_LICENSE as all python code in
googlemock/scripts/generator is licensed under Apache-2.0 and not
BSD-3c
- Fix URL of gtest project in Config.in
- Remove the gmock entry from DEVELOPERS
- Install gmock_gen directly, instead of as a symlink to gmock_gen.py
Notice that any external package that depends on gmock will cause an
immediate build termination because make doesn't know how to build
gmock. Since the user has just removed gmock from the legacy menu, it
should be quite obvious what needs to be done.
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- Use += instead of = when assigning a value to <pkg>_DEPENDENCIES in
conditional
- Remove comment about the "tricky logic" around BUILD_GTEST and
BUILD_GMOCK
- Move GTEST_GMOCK_INSTALL_MISSING_FILE inside
the ($(BR2_PACKAGE_GTEST_GMOCK),y) condition.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Many packages install documentation under /usr/share/lua/.../doc. Add
a TARGET_FINALIZE_HOOK to remove it.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The infra sets _SUBDIR to the correct value, so we can use it to define
_LICENSE_FILES.
This removes the need for LUA_CJSON_VERSION_UPSTREAM.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
LuaRocks has a policy that the rockspec and rock filenames are lower
case. However, the upstream name may contain uppercase characters.
We have several packages like that in Buildroot. To simplify the
package .mk files, apply the lowercase from within the infra.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also remove patches that have been merged upstream.
Signed-off-by: Rodrigo Rebello <rprebello@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adds the python binding for libftdi to buildroot.
Signed-off-by: Christian Kellermann <christian.kellermann@solectrix.de>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The version of the khrplatform.h header bundled with odroid-mali has a
definition of the khronos_intptr_t and khronos_ssize_t that doesn't
match the official Khronos registry headers or the Mesa3D headers. Due
to this, it causes conflicts with some packages that redefines those
types (with the correct definitions), such as libepoxy.
Issue reported upstream at: https://github.com/mdrjr/c2_mali/issues/1
Since nobody bothered fixing the issue even though it has been happening
since July 2016 (first build failure at
http://autobuild.buildroot.net/results/ed8d562ae5fdb472a83f9a07b2f755c80c972c34/),
let's mark this package as BROKEN.
Fixes:
http://autobuild.buildroot.net/results/ca48bb6291ca16e410edb83b5cdeb24847b6eaee/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building sngrep with OpenSSL support in static linking configurations
currently fails due to undefined symbols in the OpenSSL library. It's
the usual problem with using AC_CHECK_LIB() to discover libraries
instead of the pkg-config based PKG_CHECK_MODULES().
Therefore, this commit introduces a patch that switches to using
pkg-config to discover OpenSSL. A preliminary patch is needed, without
which appending to LIBS/CFLAGS doesn't work. Both patches have been
submitted upstream.
Fixes:
http://autobuild.buildroot.net/results/911143de823b2c749ac0a59dfa06adb6ddd3de50/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Even though x264 doesn't use an autoconf generated configure script
(and hence doesn't use the autotools-package infrastructure), it uses
config.guess and config.sub. The ones bundled in x264 are too old to
know about the OpenRISC architecture, so this commit leverages the
UPDATE_CONFIG_HOOK from the autotools-package infrastructure to update
config.sub and config.guess.
Fixes:
http://autobuild.buildroot.net/results/b458c2dff0ecde61248f058092c6eeaa75039cfb
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we tell cmake where to look for our own custom platform
description by passing the path to the moduls directory on the command
line.
However, this causes two different problems.
First, some packages simply set CMAKE_MODULE_PATH in their
CMakeList.txt, thus overriding our own path, and then our platform
description is not found.
Second, cmake may internally call sub-cmake (e.g. in the try_compile
macro), but the CMAKE_MODULE_PATH is not automatically passed down in
this case.
For the first problem, we could hunt down and fix all offenders, but
this is an endless endeavour, especially since packagers are told to do
so on the cmake wiki [0]:
CMAKE_MODULE_PATH
tell CMake to search first in directories listed in
CMAKE_MODULE_PATH when you use FIND_PACKAGE() or INCLUDE()
SET(CMAKE_MODULE_PATH ${PROJECT_SOURCE_DIR}/MyCMakeScripts)
FIND_PACKAGE(HelloWorld)
The second problem could be solved by passing yet another variable on
the command line, that tells cmake to explicitly pass arbitrary
variables down to sub-cmake calls:
-DCMAKE_TRY_COMPILE_PLATFORM_VARIABLES=CMAKE_MODULE_PATH
However, this only covers the case of try_compile. Even though no other
case is known yet, we'd still risk missing locations where we would need
to propagate CMAKE_MODULE_PATH, even some where we'd have no solution
like for try_compile.
Instead, ngladitz on IRC suggested that CMAKE_MODULE_PATH be set
directly from the toolchain file.
And indeed this fixes both problems explained above.
So be it.
[0] https://cmake.org/Wiki/CMake_Useful_Variables
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Ben Boeckel <mathstuf@gmail.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Mosquitto combined with version 2.1.0 of libwebsockets yields a failing
system. Version 2.1.1 restores the websocket interface again.
Signed-off-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
cryptsetup installs a library and a header file, so it makes sense to
install it to staging.
Fixes bug #9691.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since commit 0552a367db ("Remove --{enable, disable}-debug configure flags.")
we do not pass --enable-debug to configure script. The patch to remove -Werror
in this case is thus no longer needed.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changed _SITE according to URL mentioned in upstream release note.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changed _SITE according to URL mentioned in upstream release note.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changed _SITE according to URL mentioned in upstream release note.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
wayland is entirely written in C, except for a single test that is
written in C++.
Since we are not interested in running the tests on the target, add an
option to configure to disable tests altogether.
Fixes:
http://autobuild.buildroot.org/results/291/291e0f1ea18004190ae5acd9bec147cacc3e4bda/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
--disable-scanner was removed back in 2015, so drop it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This fixes a qemu-user compile error.
Reported-by: François Perrad <francois.perrad@gadz.org>
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gdk-pixbuf-loader support is enabled by default but it silently fail to
generate gdk-pixbuf.loaders file when host != target.
For exemple on ARM target:
output/host/usr/bin/gdk-pixbuf-query-loaders ./libpixbufloader-svg.la
g_module_open() failed for output/build/librsvg-2.40.16/gdk-pixbuf-loader/./libpixbufloader-svg.la: output/build/librsvg-2.40.16/gdk-pixbuf-loader/./.libs/libpixbufloader-svg.so: wrong ELF class: ELFCLASS32
But it doesn't break the build.
When host = target using the Sourcery CodeBench AMD64 2016.11 toolchain
optimized for x86_68 AMD Puma/Jaguar or AMD Steamroller, it break the
build due to "Illegal instruction".
output/host/usr/bin/gdk-pixbuf-query-loaders libpixbufloader-svg.la
Illegal instruction (core dumped)
Since this option is broken for cross-compilation, disable it.
Fixes:
http://autobuild.buildroot.net/results/393/393145bc9bcb93d6df55ec8c63725c3d9a299957
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit aca82a056b, which is
needed to revert commit 98c9b1bec6,
which itself causes build failures.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The bump of python-enum to version 0.4.6 in commit
636df89872 forgot to update the license
information. Even though the PKG-INFO file still pretends it's GPLv2
or Python license, the only license file available is LICENSE.GPL-3
(which indicates a GPLv3 license), and the comment header in the
source code is pretty clear:
This is free software: you may copy, modify, and/or distribute
this work under the terms of the GNU General Public License as
published by the Free Software Foundation; version 3 of that
license or any later version. No warranty expressed or
implied. See the file ‘LICENSE.GPL-3’ for details.
Fixes:
http://autobuild.buildroot.net/results/7fec1c7cde710f523263e74b1849f1f4488b7d26/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a runtime dependency of docker-engine in version 17.03.0-ce
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a runtime dependency of docker-engine in version 17.03.0-ce
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The bump causes build failure with musl, this new version uses with
undefined REG_STARTEND which is a glibc-ism that isn't available for
musl-based toolchains.
The introduction of this is to address
https://savannah.gnu.org/bugs/?50030 so it's not quite straightforward
to fix.
This reverts commit d003554343.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The original google code link redirects to the libyuv bug tracker. Use libyuv
git repo as a better sort of a homepage.
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we now require Lua package names to start with "lua", it is likely
that the Buildroot name is different from the upstream LuaRocks name.
Add a feature to the luarocks-package infra that makes it easier to
handle this situation: the package can explicitly specify the upstream
name in PKG_NAME_UPSTREAM, and that name will be used in PKG_ROCKSPEC,
PKG_SOURCE and PKG_SUBDIR.
Add an explanation of this feature to the manual. To make the example
relevant, it is changed to lua-foo, where the upstream name is plain
foo. To avoid confusion with the dependency on a native library, that
dependency is renamed to bar.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the reworked luarocks extraction, they are no longer needed.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The luarocks package infra extracts the package directly under
$(BUILD_DIR), because the contents are always in a subdirectory name
<pkg>-<version>. However, this only works when the upstream package name
is the same as the Buildroot package name.
Instead, we can rely on the fixed structure of a .src.rock: it always
contains the source subdirectory in a directory called foo, where foo
is the basename of the .src.rock file. Therefore, we can extract into
a subdirectory of $($(PKG)_DIR), then move its contents up two
directory levels.
Note, we can't extract directly into $($(PKG)_DIR) because it's
possible that $($(PKG)_SUBDIR) == <pkg>-<version>. In that case, we
would try to move the directory unto itself and get "Directory not
empty". This is the case e.g. for the lpty package.
Two alternatives were considered but are more complicated:
- instead of using wildcards for the move, we could have used
<.src.rock basename>/$($(PKG)_SUBDIR);
- instead of extracting with luarocks, we could use unzip to extract
(the .src.rock is a ZIP file), but then we also have to move the
.rockspec into the subdir. In addition, sometimes the ZIP file
contains a tarball instead of the extracted source.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the bump of luaposix to 33.4.0, it doesn't work anymore at
runtime with LuaJIT or Lua 5.1. This can be tested with the following
defconfig:
BR2_x86_64=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_PACKAGE_LUA=y
BR2_PACKAGE_LUA_5_1=y
BR2_PACKAGE_LUAPOSIX=y
/usr/bin/lua: /usr/share/lua/5.1/posix/init.lua:17: module 'bit32' not found:
...
In older luaposix versions, it would try to load the 'bit' instead of
'bit32' module if LUAVER == 5.1. However, this feature was removed in
33.4.0.
So instead of adding a runtime dependency on luabitop, depend on
lua-bit32.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package is needed to make luaposix work.
The upstream name is just "bit32", but the luarocks infra doesn't
support an upstream name different from the Buildroot name. We therefore
have to explicitly set all variables and we need custom extract
commands.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- add entry to DEVELOPERS file
- remove useless "depends on BR2_PACKAGE_HAS_LUAINTERPRETER" in
Config.in file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The luarocks infra already provides the correct default value for
PKG_SUBDIR, so it doesn't have to be defined in the .mk file.
Therefore, _VERSION_UPSTREAM doesn't need to be defined either.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The luarocks infra already provides the correct default value for
PKG_SUBDIR, so it doesn't have to be defined in the .mk file.
Therefore, _VERSION_UPSTREAM doesn't need to be defined either.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The luarocks infra already provides the correct default value for
PKG_SUBDIR, so it doesn't have to be defined in the .mk file.
Therefore, _VERSION_UPSTREAM doesn't need to be defined either.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The luarocks infra already provides the correct default value for
PKG_SUBDIR, so it doesn't have to be defined in the .mk file.
Therefore, _VERSION_UPSTREAM doesn't need to be defined either.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The luarocks infra already provides the correct default value for
PKG_SUBDIR, so it doesn't have to be defined in the .mk file.
Therefore, _VERSION_UPSTREAM doesn't need to be defined either.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It is not used for anything.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It is not used for anything.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It is not used for anything.
Note that the SUBDIR is NOT the usual lpty-$(LPTY_VERSION_UPSTREAM);
it *does* have the rockspec version in its name.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The inner-luarocks-package macro was using $(3)_VERSION as the package
version, i.e. the version of the target package, even when it's the
host package. We should instead use $(2)_VERSION, i.e. the host package
version, like is done in inner-generic-package.
Since luarocks-package doesn't even support a host version, it doens't
make a whole lot of difference, but let's keep things consistent.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The cosmo package has been marked as broken for two and a half years
now, and nobody cared. Get rid of it.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since this package really is a Lua extension, it fits under the Lua
libraries menu.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The latest crossbar needs a rather recent setuptools package, that
has circular dependencies. Until this issue is not resolved, it is
not safe to bump crossbar version.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
fastd's CMakeList.txt completely overwrites CMAKE_MODULE_PATH with its
own, thus causing cmake to not find our own custom one.
We fix fastd by appending its custom value, rather than replacing.
Fixes:
http://autobuild.buildroot.net/results/69f/69fb2e3b549a069e2898506db918423e6742c589/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Alexander Dahl <post@lespocky.de>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Ben Boeckel <mathstuf@gmail.com>
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 701380c53b4d("fontconfig: add build fix for glibc 2.25") added
a patch that touches src/fcobjs.h. Package build system detects change
in timestamp and tries to regenerate fcobjshash.gperf which requires
gperf tool. So this commit adds dependency on host-gperf.
Since the patch is in upstream fontconfig, we can get rid of this
dependency once version is bumped next time.
Fixes:
http://autobuild.buildroot.net/results/174/17471088b26ebc840d1922d7f2aa9e69b4b49ced
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
[Thomas: improve comment in the code.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package provides execline, a (non-interactive) scripting language,
like sh, used in the s6 supervision system.
The host variant is provided as it is required to build and run the host
variants of s6 and s6-rc.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
[Thomas: add entry to DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for the Etnaviv gallium driver.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
EUMM don't find .xs file in subdirectory (only .pm files are handled)
So, let move lib/GD.xs in the root directory.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The libsidplay2 package build system is completely broken. It is made
of a top-level configure script, which calls into sub-configure
scripts in sub-directories. However, since it doesn't use the autoconf
provided AC_CONFIG_SUBDIRS() mechanism, an "autoreconf" doesn't
recurse into the subdirectories.
Due to this, the aclocal.m4 in the libsidplay/ subdirectory doesn't
get re-generated when Buildroot autoreconfs the package. However,
since we patch one of the .m4 files in this subdirectory, when build
time comes, the package notices its aclocal.m4 is older than one of
the .m4 file, and triggers an automatic autoreconf.
Since <pkg>_AUTORECONF = YES is enabled, this automatic autoreconf
works fine: host-autoconf and host-automake are available.
Expect that on powerpc64le, we patch the configure script itself to
make it recognize powerpc64le. But this patching of the configure
script itself gets overwritten by the automatic autoreconf at the
beginning of the build step, causing the build to fail on powerpc64le.
Switching to AC_CONFIG_SUBDIRS() would allow to fix this, but
libsidplay2 needs to pass custom configure options to each of the
sub-configure scripts, something that AC_CONFIG_SUBDIRS() doesn't
support. And since libsidplay2 upstream looks completely dead, the
incentive to fix the whole thing is very limited.
Since what's broken is the autoreconfiguration of the package, what we
do is modify patch 0001-sidplay2-libs-2.1.1.patch to directly tweak the
configure script (instead of the relevant .m4 file). Thanks to this,
<pkg>_AUTORECONF = YES is no longer needed, the .m4 file is no longer
newer than the sub-configure script, and no automatic autoreconf
triggers at build time. This allows the package to build properly on
powerpc64le.
While we normally don't like patching 'configure' scripts directly, in
this case the size of the change in the configure script is very small,
and as explained above, the incentive to fix the package properly is
very limited.
In detail, the changes:
* Patch 0001-sidplay2-libs-2.1.1.patch is turned into a Git-formatted
patch
* The irrelevant changes to Makefile.in files, aclocal.m4, config.h.in,
sidint.h are removed.
* The change to my_macros.m4 is applied directly to the corresponding
configure script.
* The change to the configure.ac script regarding libdir is applied
directly to the corresponding configure script.
* The change to the configure.ac script regarding "*-k*bsd*-gnu" is
dropped, since we don't care about kFreeBSD support.
* LIBSIDPLAY2_AUTORECONF = YES is dropped from the .mk file.
Fixes:
http://autobuild.buildroot.net/results/1f6a42bfece24e09c9c7f4078d549ec5c099c89d/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit d4c4c259d2. It was
mistakenly committed and pushed: it causes Kconfig circular
dependencies, so it cannot be applied as-is.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We don't want a dozen glibc versions and there's no particular reason to
keep this old version around so drop it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
[Thomas: add entry to Config.in.legacy.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
kodi needs CWIID_MESG_BALANCE
https://github.com/xbmc/xbmc/blob/Krypton/tools/EventClients/Clients/WiiRemote/CWIID_WiiRemote.cpp#L106
It was added after the last cwiid release, which took place 2009:
2174214bc2
Instead of adding another 20k-sized patch we switch to the upstream
github repo and bump to its HEAD commit, dating back to 2010.
By doing this we can remove two patches which were applied upstream:
0001-fix-link-options-for-as-needed-90.patch
6af6786165
0002-Update-for-BlueZ-changes.patch
c5dd7d4a9a
The remaining patches were renumbered.
This patch is needed for the upcoming Kodi version bump which also adds
optional cwiid support.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
memtool allows one to read and write memory mapped registers via /dev/mem.
The commands are inspired by the respective commands of the barebox
bootloader. This is handy during driver development to inspect and modify
register settings. It can also be used to modify regular files and
character devices (e.g. to paint to /dev/fb0).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: add entry to DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mpd package fails for both internal and external ARC toolchain as check
for pthread support fails. Such checks fails because _REENTRANT flag is
not defined in gcc even when -pthread is passed.
So we add patch to gcc that defines _REENTRANT on ARC when -pthread is
passed.
Also it disables mpd package for external ARC toolchain as it fails due
to the same issue.
This patch should be reverted as soon as the patch for GCC becomes a
part of ARC toolchain.
Fixes:
http://autobuild.buildroot.net/results/7d7/7d70b62ad996830fbeca46dffcc7a1dc030e575d//
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 1ffcf364b6 updated cmake to 3.7.0,
which requires selecting the libuv package. At the time, the libuv
package only depended on BR2_TOOLCHAIN_HAS_THREADS. However, later on,
it was changed in master to depend on BR2_TOOLCHAIN_HAS_THREADS_NPTL, a
change which was not taken into account in the cmake 3.7.0 bump that was
merged in the next branch.
Due to this, builds of cmake is attempted on architectures that don't
provide NPTL thread support, causing a build failure. This commit fixes
that by adjusting the dependency.
Fixes:
http://autobuild.buildroot.net/results/16a5e1cbb57c0124537c4f3dc0807ba1eaa975ec/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libuv is now a required dependency.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The handling of RPATH in cmake-3.7 has changed drastically, causing a
slew of build failures dues to libraries from the host being pulled in:
- domoticz : http://autobuild.buildroot.org/results/fd0/fd0ba54c7abf973691b39a0ca1bb4e07d749593a/
- freerdp : http://autobuild.buildroot.org/results/5d4/5d429d0e288754a541ee5d8be515454c5fccd28b/
- libcec : http://autobuild.buildroot.org/results/3f3/3f3593bab7734dd274faf5b5690895e9424cbb89/
- and so on...
The bug was reported upstream [0], which dismissed it altogether [1] as
being expected behaviour, quoting:
I don't think there is anything wrong with that change on its own.
It merely exposed some existing behavior in a new case.
Instead, upstream suggested in that same message that a platform
definition be used instead, quoting:
If a toolchain file specifies CMAKE_SYSTEM_NAME such that a custom
`Platform/MySystem.cmake` file is loaded then the latter can set
them as needed for the target platform.
So here we are doing so:
- we add a new platfom definitions that inherits from the Linux one,
then overrides the problematic settings;
- we change our toolchain file to use that platform instead;
- we tell cmake where to find additional modules, so that it can find
our custom platform file.
This has been tested to work in the following conditions:
- pre-installed host cmake, versions 3.5.1 (Ubuntu 16.04) and 3.7.2
(manually built)
- internal cmake, versions 3.6.3 (the current version as of this
patch) and 3.7.2 (with the followup patches).
Thanks to Jörg, Ben and Baruch for the help investigating the issue.
Special thanks to Jörg for handling the discussion with upstream and
pointing to the relevant messages! :-)
[0] http://public.kitware.com/pipermail/cmake/2017-February/064970.html
[1] http://public.kitware.com/pipermail/cmake/2017-February/065063.html
To be noted: Thomas suggested we set these directly in the toolchain
file. Unfortunately, wherever we put those settings in the toolchain
file, this does not work.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Ben Boeckel <mathstuf@gmail.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
GNU classpath builds fine on sparc and sparc64 architectures. So
we allow building it there to be consistent with the naming of
BR2_PACKAGE_CLASSPATH_ARCH_SUPPORTS.
Signed-off-by: Marcus Hoffmann <m.hoffmann@cartelsol.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported in this bug report [1], altivec support in SDL break
arbitrary C++ code.
Issue reported by test-pkg script while testing supertux package:
error: could not convert 'true' from 'bool' to '__vector(4) __bool int'
[1] https://bugs.debian.org/cgi-bin/bugreport.cgi/?bug=770670
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Set ENABLE_CUSTOM_COMPILER_FLAGS to OFF to disable custom flags, in
particular -fstack-protector-strong which depends on
BR2_TOOLCHAIN_HAS_SSP
Fixes:
http://autobuild.buildroot.net/results/cfcf3bc8066159dfddd1786954d78e8527858f2f/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ncftp build process tries to build and run a small program called
ccdv to beautify the build process output. If it manages to build and
run it, then it uses it.
Unfortunately, this doesn't work well when the target architecture is
close to the host architecture, but not exactly the same. Because both
architectures are close to each other, the test run of ccdv succeeds,
but real use of ccdv during ncftp build process causes an Illegal
instruction issue.
This for example happens with the CodeSourcery AMD64 toolchain, on a
build machine running an i7-4600U, and has been detected in the
autobuilders since the CodeSourcery AMD64 toolchain was upgraded at
the end of January:
http://autobuild.buildroot.net/?reason=ncftp-3.2.6
The issue was also reported by Christopher Arguin back in July 2016:
http://lists.busybox.net/pipermail/buildroot/2016-July/168026.html
and at the time, we identified that simply disabling the ccdv tool, by
passing --disable-ccdv, was enough to solve the issue. But Christopher
never submitted the patch, so the problem remained unfixed.
Therefore, we pass --disable-ccdv to the configure script, which
fixes:
http://autobuild.buildroot.net/results/6eadad0e879ca70bb07b13b4196d42c64b11699f/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package fails when building with ARC external toolchain
Marking this with special comment "# ARC toolchain issue" as the package
is to be enabled as soon as the issue with the ARC toolchain is
resolved.
Fixes:
http://autobuild.buildroot.net/results/fb6/fb677a917545adee321bdcd2c2519c81326448c4//
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package fails when building with ARC external toolchain
Marking this with special comment "# ARC toolchain issue" as the package
is to be enabled as soon as the issue with the ARC toolchain is
resolved.
Fixes:
http://autobuild.buildroot.net/results/28a/28a92049a6ceef005787c5779f77ecf3fe8ad642//
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
