Adding configuration options that if libssh2 is selected, compile libcurl
with --with-ssh config flag.
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Unless it was a group of sub-packages, packages was never regrouped by
category. multimedia/ was an exception to this rule.
This patch move packages/multimedia/ sub-directories to packages/. It
keeps two subdirectories for gstream 0.10 and gstreamer 1.X.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also cleaned the package makefile up by removing explicitly naming
the source along with moving the configure of the package down below
the standard package declarations.
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Lua website says:
"Like most names, it should be written in lower case with an initial capital,
that is, "Lua". Please do not write it as "LUA", which is both ugly and
confusing, because then it becomes an acronym with different meanings for
different people."
http://www.lua.org/about.html
So, let's honor this request in buildroot.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Until now, $(PKG)_PATCH allow only to download patches from same URL than tarball.
This patch allow to detect when plain URL are used in $(PKG)_PATCH and correctly
handle them.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If xzcat is not present on the host system, buildroot bails out early asking
the developer to install it (xzcat is now a DL_TOOLS_DEPENDENCY)
Conversely, when BR2_TARGET_ROOTFS_CPIO_XZ is enabled, then host-xz is a
build dependency, and no manual action is required from the developer.
Because the second approach is nicer, also build host-xz when xzcat is not
available, using the host-prerequisite and suitable-host-pkg mechanisms,
already used for tar.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In order to simplify determining the right extractor tool for a given
file type, this patch introduces a make function 'suitable-extractor'.
Its usage is $(call suitable-extractor,filename), and it returns the
path to the suitable extractor.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Make 3.82 no longer sort the result of wildcards (see
http://comments.gmane.org/gmane.comp.gnu.make.bugs/4260). This may break
build reproducibility.
This patch sort results of wildcards to ensure reproducibility.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Upstream has a large number of patches lined up for the next 0.9.33.x bugfix
release;
http://git.uclibc.org/uClibc/log/?h=0.9.33
Add them here, as atleast some of them are quite critical (E.G. the eventfd
issue gets triggered by recent glib versions).
I've skipped the microblaze and xtensa fixes as we don't currently support
those with 0.9.33.2.
Drop uclibc-0002-Add-definition-of-MSG_WAITFORONE-and-MSG_CMSG_CMSG_CLOEXE.patch
as that is a subset of uclibc-0035-socket.h-pull-socket_type.h-from-eglibc.patch
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Removed patches that were are now in version 2.23 of util-linux along with
fixed up other patches so they apply cleanly.
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes and improvements for USB, audio sync, camera support,
codecs, HDMI framerate and audio, and GPU freezes.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add support for gnutls, nss and polarssl backends.
Add support for libidn and zlib.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes a build issue with the avr32 toolchain:
http://jenkins.free-electrons.com/job/buildroot/config=atngw100_defconfig/104/
Invalid configuration `MAKEINFO=missing': machine `MAKEINFO=missing' not
recognized
Instead pass it in the environment of ./configure, similar to how it was
done originally in 62322acb2c (toolchain/gcc: disable makeinfo).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
So we don't end up pulling in host-busybox (which doesn't exist) if
KMOD_TOOLS is enabled.
Reported-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
And deprecate 3.9.x series to match upstream.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Looks like this was lost in 20d4792e.
[Peter: use _INSTALL_INIT_SYSV, explicitly delete script on uninstall]
Signed-off-by: Peter Sanford <psanford@nearbuysystems.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
PCRE C++ unit tests fails to build properly for static scenarios since
it's not taken account for properly in the build system.
Just disable them, they're never installed to the target.
Fixes:
http://autobuild.buildroot.net/results/970/97027b981659502ff12c345c3caef4933cddb354/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When libgcrypt support is enabled the configure script will try to
find libgcrypt-config in the PATH. If the host distribution has it then
brokeness ensues. Fixes:
http://autobuild.buildroot.net/results/eca/eca10b8360354e7e51406f7ac942d343987bde5e/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The documentation of older GCC versions (E.G. 4.3.x) contain constructs
that are no longer accepted by recent (5.x) versions of makeinfo, breaking
the build.
The documentation isn't really needed, and takes up extra space/build time,
so work around it by disabling documentation, like we had before the
conversion of the toolchain to the package infrastructure.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since kmod 14, the support for building a static library has been
removed completely from kmod. Therefore, we mark kmod as
!BR2_PREFER_STATIC_LIB, as well as all its reverse dependencies, which
includes the option to use the "udev" /dev management method.
[Peter: show comment for udev when BR2_PREFER_STATIC_LIB is enabled]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit removes the module-init-tools package and adds the
relevant Config.in.legacy entries to ease the migration for users.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since module-init-tools is deprecated, we now want to use kmod instead
for the installation of modules during the kernel build process. In
order to do this, we need to be able to build a host variant of kmod,
which is want this patch allows to do.
Note that only the depmod tool is installed on the host, since that's
the only one likely to be used on the host in a cross-compilation
context.
[Peter: needs AUTORECONF for the host as well. Fix comment while we're at it]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The KMOD_INSTALL_TOOLS macro uses a non-conventional indentation. This
commit fixes this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In order to be sure that we just deal with the includes related with
the actual package described into libffi.mk it is better to explicitly
specify the version of the libffi we deal with into the post install
hook.
As dev files are deprecated in target rootfs target post install
hook was also deleted.
Signed-off-by: Nicolas Ménégale <nicolas.menegale@openwide.fr>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libsecret is a library for storing and retrieving passwords
and other secrets. It communicates with the "Secret Service"
using DBus. gnome-keyring and ksecretservice are both
implementations of a Secret Service.
libsecret replaces libgnome-keyring.
https://wiki.gnome.org/Libsecret
[Peter: also needs host-intltool]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Updating revision of libcurl to version 7.32.0
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
There is a simple typo in package/ti-gfx/ti-gfx.mk, which the
following patch corrects.
Signed-off-by: Martin Creutziger <buildroot@martin.creutziger.net>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It requires OpenSSL and IPv6 support and it should probably be an
option since SSL support uses GnuTLS thus making a huge target
footprint with 2 SSL/TLS libraries for full support.
But most of all it's considered experimental.
Fixes:
http://autobuild.buildroot.net/results/836/836c39c11cecbcf9399675ba3ab01202417b9642/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since 9169810a9b ("neon: replace
'choice' for XML library with two options") the option
BR2_PACKAGE_NEON_NOXML no longer exists. However, it was not taken
into account properly within neon.mk, as this option was still used to
disable webdav support when no XML library has been selected.
Fixes:
http://autobuild.buildroot.org/results/7ed/7ed657570d83b28389dd8c01ffdd895d2e8d145f/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Make it use external instead of bundled libevent - it's better for size
reasons (avoiding possible duplication) and security reasons (easier to
upgrade one global library than possibly two or more, and generally
upstream would probably be more responsive to those).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The strongswan configure.in uses the AC_LIB_PREFIX macro, which adds
--with-lib-prefix and --without-lib-prefix options, and which, by
default assumes that adding ${prefix}/lib to LDFLAGS and
${prefix}/include to CPPFLAGS is a good idea. Obviously, when
cross-compiling, it is definitely not a good idea.
In the specific case of strongswan, the result is that when testing if
the backtrace() function was available, the small C program was being
built and linked with -L/usr/lib. So when the host architecture and
target architecture are identical, it may find the backtrace()
function in the host C library, without looking at the target C
library:
configure:16457: /home/test/outputs/a637f916962b6136dd6dd4f4b9ff4e1cab568ef3/output/host/usr/bin/x86_64-unknown-linux-uclibc-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -L/usr/lib conftest.c >&5
/home/test/outputs/a637f916962b6136dd6dd4f4b9ff4e1cab568ef3/output/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-unknown-linux-uclibc/4.6.3/../../../../x86_64-unknown-linux-uclibc/bin/ld: warning: libc.so.0, needed by /home/test/outputs/a637f916962b6136dd6dd4f4b9ff4e1cab568ef3/output/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-unknown-linux-uclibc/4.6.3/../../../../x86_64-unknown-linux-uclibc/lib/../lib64/libgcc_s.so, may conflict with libc.so.6
Passing --without-lib-prefix prevents this default behavior from
happening, and no stupid value is added to CPPFLAGS or LDFLAGS.
Fixes:
http://autobuild.buildroot.net/results/a637f916962b6136dd6dd4f4b9ff4e1cab568ef3/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Restore missing mips->mipsel symlink. It appears ltrace was
packaged incorrectly and the symlink got lost. See
http://lists.alioth.debian.org/pipermail/ltrace-devel/2013-August/000938.html
[Peter: add a comment explaining why]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The MesaLib 7.10.3 tarball has been moved on ftp.freedesktop.org from
pub/mesa/7.10.3/ to pub/mesa/old_versions/7.x/7.10.3/.
A bump to a newer release is only coming after Buildroot 2013.08, so for now
let us just change URL to let the download work properly.
Reported-by: Ryan Wilkins <ryan@deadfrog.net>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit introduces a patch to kmod that ensures _Static_assert()
is only used if available. The patch has been submitted upstream.
Fixes:
http://autobuild.buildroot.net/results/9daf0f46642020591731e20d3bf9041ff6259846/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Reorder the entries in the top-menu, in a more significant order.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin+buildroot@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some parts of redis fail to build when ccache is enabled, due to one of our
own patches. The construct
make CC=$(CC) target1 target2
would result in
make CC=ccache <tuple>-gcc target1 target2
and here <tuple>-gcc would be treated as a target and the compiler used
would be just 'ccache'.
Reported-by: Johan Sagaert <sagaert.johan@skynet.be>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since 5628776c4a
"toolchain-external: fix lib64 symlinks"
lib64 is a symlink to lib so there is no reason to copy the libraries
to lib64 anymore. This fixes multiple building problems
for buildroot toolchains:
[...]
mv: 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib64/libuClibc-0.9.33.2.so'
and 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib/libuClibc-0.9.33.2.so'
are the same file
mv: 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib64/libutil-0.9.33.2.so'
and 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib/libutil-0.9.33.2.so'
are the same file
mv: 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib64/libutil.so.0'
and 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib/libutil.so.0'
are the same file
rmdir: failed to remove
'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib64': Not a directory
[...]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
fix bad escape sequences in init script and add correct lib for pc file.
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The NEON library can either be compiled without XML support, with XML
support provided by Expat, or with XML support provided by
libxml2. Until now, to represent this, a Kconfig 'choice..endchoice'
was used. Unfortunately, another package cannot 'select' one of the
possible choices. So for example, a package such as 'rpm', or the
to-be-added 'subversion' package could not select their dependencies,
they had to do a 'depends on !BR2_PACKAGE_NEON_NOXML', which is not
how Buildroot handles library dependencies in general.
So, this commit replaces the 'choice...endchoice' block with simply
two configuration options that are mutually exclusive. The option
names are not changed, so no Config.in.legacy addition is needed.
An hidden option BR2_PACKAGE_NEON_XML is provided, so that packages
that need XML support in NEON but don't care whether it's provided by
Expat or libxml2 can simply select BR2_PACKAGE_NEON_XML.
The rpm package is updated accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
minidlna will detect and use the libiconv library if
the package is selected. In that case, we need to link
against -liconv.
Fixes the following linking problem:
tagutils/tagutils.o: In function `do_iconv.constprop.6':
tagutils.c:(.text+0x4d5c): undefined reference to `libiconv_open'
tagutils.c:(.text+0x4da0): undefined reference to `libiconv'
tagutils.c:(.text+0x4e08): undefined reference to `libiconv_close'
[Peter: wrap COMMON_LIBS line]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The NEON intrinsics used by Pulseaudio are only available in either
-mfloat-abi=softfp or -mfloat-abi=hard, not in
-mfloat-abi=soft. Therefore having NEON support in the processor is
not sufficient, we also should *not* be using soft-float.
Moreover, looking at BR2_ARM_ENABLE_NEON to know if the processor has
NEON support is incorrect. This option is only here to allow the user
to tell whether the processor has NEON support or not, for the ARM
cores that only have optional NEON support. Instead, the
BR2_ARM_CPU_HAS_NEON option really indicates whether NEON is available
or not (it is either set automatically by the ARM cores that always
have NEON support, or when BR2_ARM_ENABLE_NEON is enabled by the user
to confirm that his ARM processor has NEON support).
This fixes build failures such as
http://autobuild.buildroot.org/results/675/675c96059be348b594cc92980bef391126931c83/build-end.log
[Peter: add comment about reason for soft abi check]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The current code to set ABI on ARM does the following:
ifeq ($(BR2_arm)$(BR2_armeb),y)
... set ABI without 'hf' suffix ...
else ifeq ($(BR2_ARM_EABIHF),y)
... set ABI with 'hf' suffix ...
endif
But since $(BR2_arm)$(BR2_armeb) will always be 'y' in the cases where
BR2_ARM_EABIHF is 'y', it means that the 'else' part of the condition
will never be used.
Fix this by appending 'hf' to the ABI variable when BR2_ARM_EABIHF is
selected.
[Peter: put EABIhf handling under arm/armeb conditional for consistency]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Several of the lines in S50sshd script have a strange mix of spaces
and tabs, that at least do not look consistent with neighboring lines.
This patch makes the spacing consistent, and also strips the trailing
spaces.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The $(TARGET_DIR) variable is required when building
python-setuptools for the target otherwise the build system detects
the host installation which leads to permission error problems
like these:
Setuptools installation detected at /usr/lib64/python2.7/site-packages
Renaming /usr/lib64/python2.7/site-packages/setuptools-0.9.8-py2.7.egg-info to
/usr/lib64/python2.7/site-packages/setuptools-0.9.8-py2.7.egg-info.OLD.1377005697.88
OSError: [Errno 13] Permission denied
Moreover, remove the PYTHONPATH variable for host variant since it's
not needed.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
HarfBuzz is an OpenType text shaping engine
http://www.freedesktop.org/wiki/Software/HarfBuzz/
[Peter: Move to libraries/graphics, needs C++ support]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Just like 'attr', 'acl' doesn't use automake to control the
build/installation of its components, and the static-only installation
process was not installing libacl.a. We add a patch that fixes this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
