To be consistent with the recent change of FOO_MAKE_OPT into FOO_MAKE_OPTS,
make the same change for FOO_CONF_OPT.
Sed command used:
find * -type f | xargs sed -i 's#_CONF_OPT\>#&S#g'
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Relese notes for 0.9.9 release are avaialble here:
http://oprofile.sourceforge.net/release-notes/oprofile-0.9.9
This release adds support for ARC architecture.
Also introduces new "ocount" program for collection of raw event counts.
With release of 0.9.9 we may drop back-ported patches:
oprofile-002-no-query-modules.patch - liblegacy was removed since 2.4 kernels
are no longer supported
fcb818623b/
oprofile-003-oprofile-ppc32-build-fix.patch
fa889ea74b/
oprofile-004-fix-ppc64-specific-libpfm-usage.patch
79a183ed0d/
oprofile-005-fix-up-configure-to-handle-architectures-that-do-not.patch
ca6d916a6f/
But in 0.9.9 was introduced build breakage which was fixed later so adding
another back-ported patch
oprofile-002-Fix-compile-error-on-ppc-uClibc-platform-AT_BASE_PLA.patch
08241f1b2c/
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Simon Dawson <spdawson@gmail.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There is no perf_events support in the kernel for avr32. The oprofile
package makefile hard codes the list of binaries to install. Unfortunately,
this hard-coded list contains pe_profiling/operf, which is only built when
perf_events support is available.
Fixes autobuild failures such as the following.
http://autobuild.buildroot.net/results/492/492659bc252395a62e62e6005ed0e86e582dcada/
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/73d736dd3c8a70358ef4b19a63dda46178cf8bf1/
Note that the propagation of the thread dependency to the oprofile
package is a little bit non standard, because oprofile selects libpfm4
only on the PowerPC architecture. So we ensure the thread dependency
is only enforced on PowerPC, and a separate comment is displayed when
thread support is not available, but the PowerPC architecture is used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When a package A depends on config option B and toolchain option C, then
the comment that is given when C is not fulfilled should also depend on B.
For example:
config BR2_PACKAGE_A
depends on BR2_B
depends on BR2_LARGEFILE
depends on BR2_WCHAR
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
This comment should actually be:
comment "A needs a toolchain w/ largefile, wchar"
depends on BR2_B
depends on !BR2_LARGEFILE || !BR2_WCHAR
or if possible (typically when B is a package config option declared in that
same Config.in file):
if BR2_B
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
[other config options depending on B]
endif
Otherwise, the comment would be visible even though the other dependencies
are not met.
This patch adds such missing dependencies, and changes existing such
dependencies from
depends on BR2_BASE_DEP && !BR2_TOOLCHAIN_USES_GLIBC
to
depends on BR2_BASE_DEP
depends on !BR2_TOOLCHAIN_USES_GLIBC
so that (positive) base dependencies are separate from the (negative)
toolchain dependencies. This strategy makes it easier to write such comments
(because one can simply copy the base dependency from the actual package
config option), but also avoids complex and long boolean expressions.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(untested)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch lines up the comments in Config.in files that clarify which
toolchain options the package depends on.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The oprofile build was broken on powerpc since version 0.9.8.
This was detected in several autobuilds, like
http://autobuild.buildroot.net/results/6f6c02d18495907d50fcdfc6003ac20d493c55fe/
Thomas Petazzoni had some fixes pending in his own tree, and this patch is
partially based on this work (credits to him). Here is an overview:
- I took over (and fixed) the oprofile.mk changes, except for the powerpc-
specific part. For powerpc, there is a new dependency to libpfm4.
- I reimported those Yocto patches that were specific to the ppc build
issues, but left out the other ones. Those can be added in separate
commits.
[Peter: simplify libpfm4 check]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The patches to oprofile 0.9.7 seem still relevant for 0.9.8, but for some
reason they were not upstepped.
[Peter: drop version number from patch filenames]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The default <foo>_SITE value that pkg-generic sets when the .mk file
doesn't declare it is using BR2_SOURCEFORGE_MIRROR and therefore isn't
consistent with the usage of downloads.sourceforge.net we have
generalized for all drivers.
Since the downloads.sourceforge.net URLs are inherently specific to
each package, we can no longer provide a default in pkg-generic.mk,
and therefore each package *must* declare its own <foo>_SITE value.
This patch fixes the only two packages that were lacking a <foo>_SITE
value.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Based on patch by Benoit Mauduit. Now that we can build binutils for
the target with external toolchains, oprofile is also available.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Bump to version 0.9.7
* Style fixes
* Build fix for x86: i386 is expected, not some other random i?86 as arch
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thanks to the pkgparentdir and pkgname functions, we can rewrite the
AUTOTARGETS macro in a way that avoids the need for each package to
repeat its name and the directory in which it is present.
[Peter: pkgdir->pkgparentdir]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Convert the oprofile target to select the new libbfd staging/target
option to avoid a huge target binutils for a simple task.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
oprofile depends on binutils_target, but binutils_target fails to
build with external toolchains because the binutils version has not
been choosen. As the fix is not trivial, let's just disable oprofile
in external toolchain builds for the moment.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To reflect the new output directory hierachy rename the Makefile variable
TOOL_BUILD_DIR to TOOLCHAIN_DIR.
Signed-off-by: Michael Roth <mroth@nessie.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch bumps the version to 0.9.4 and converts the oprofile.mk to use
Makefile.autotools.in. Patches against 0.9.3 are removed since they are no
longer needed and a new patch for 0.9.4 is added.
Building for all architectures should now also be possible.
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Fathi Boudra <fboudra@gmail.com>
