Currently, for the dynamic loader, we're copying ld*.so* for glibc and
uClibc, except for glibc/EABIhf where we are explicitly copying
ld-linux-armhf.so.*. For musl, we're not copying the dynamic linker
because it's simply a symbolic link to libc.so. However, the name of
the musl dynamic linker changes from one architecture to the other,
and we don't handle all cases.
Since handling the musl dynamic linker symlink creation is becoming
more and more annoying to maintain, this commit makes musl use the
same mechanism as glibc/uClibc: put the dynamic linker in
TOOLCHAIN_EXTERNAL_LIBS.
In addition, the special condition on glibc/EABIhf was added in
11ec38b695 ("toolchain-external: fix
Linaro ARM toolchain support") because an old Linaro toolchain had two
dynamic loaders, and we wanted to copy only one. But 1/ this is old
and 2/ having the two dynamic linkers doesn't really matter.
So this commit simply unconditionally adds "ld*.so*" to
TOOLCHAIN_EXTERNAL_LIBS, regardless of the C library being chosen. It
re-uses the musl dynamic linker symlink from the sysroot, which makes
it always correct, and allows us to remove the
TOOLCHAIN_EXTERNAL_MUSL_LD_LINK hook, and all the related logic.
This commit therefore solves two problems with the musl dynamic linker
symbolic link creation logic:
1 We support all architectures, without having to hardcode in
Buildroot the mapping between the CPU architecture and the
corresponding dynamic linker name. For example, our current logic
was not handling the mips64+n32 ABI case, where the dynamic linker
is named ld-musl-mipsn32el.so.1.
2 We support Crosstool-NG musl toolchains, where the dynamic linker
is in /lib, but libc.so is in /usr/lib.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
This commit therefore replaces:
- https://patchwork.ozlabs.org/patch/780411/ (was another solution
for solving problem 1 above)
- https://patchwork.ozlabs.org/patch/763977/ and
https://patchwork.ozlabs.org/patch/748974/ (was another solution
for solving problem 2 above)
copy_toolchain_lib_root copies libraries from staging to target,
resolving and copying symbolic links along the way.
The most inner loop, a "while" loop, starts from an initial name, and
if it's a symbolic link, gets resolved to the target, and the loop
iterates until we reach a real file. However, the destination folder
where the symbolic link or real file is created is computed in DESTDIR
only once, before this loop starts. Therefore, this loop works fine
when all symbolic links in the chain, and the real file all belong to
the same directory. But it doesn't do the correct thing when the
symbolic link and/or real file are in different folder.
An example is Crosstool-NG musl toolchains, where the dynamic loader
is in /lib/ld-musl*.so but points to ../usr/lib/libc.so. With the
current logic, we copy /lib/ld-musl*.so to /lib, but we also copy
libc.so to /lib instead of the expected /usr/lib.
This currently doesn't cause any problem because the musl dynamic
linker is manually created by the TOOLCHAIN_EXTERNAL_MUSL_LD_LINK
hook. However, this logic has a number of problems, so in a followup
commit, we are going to put the musl dynamic linker in
TOOLCHAIN_EXTERNAL_LIBS, which will cause it to be copied by
copy_toolchain_lib_root. But we obviously want the link and its target
to be copied to the right place, hence this fix.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move toolchainfile.cmake and Buildroot.cmake from
$(HOST_DIR)/usr/share/buildroot to $(HOST_DIR)/share/buildroot.
Build-tested with a bunch of cmake packages.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We currently use $(HOST_DIR)/usr as the prefix for host packages. That
has a few disadvantages:
- There are some things installed in $(HOST_DIR)/etc and
$(HOST_DIR)/sbin, which is inconsistent.
- To pack a buildroot-built toolchain into a tarball for use as an
external toolchain, you have to pack output/host/usr instead of the
more obvious output/host.
- Because of the above, the internal toolchain wrapper breaks which
forces us to work around it (call the actual toolchain executable
directly). This is OK for us, but when used in another build system,
that's a problem.
- Paths are four characters longer.
To allow us to gradually eliminate $(HOST_DIR)/usr while building
packages, replace it with a symlink to .
The symlinks from $(HOST_DIR)/usr/$(GNU_TARGET_NAME) and
$(HOST_DIR)/usr/lib that were added previously are removed again.
Note that the symlink creation will break when $(HOST_DIR)/usr
already exists as a directory, i.e. when rebuilding in an existing
output directory. This is necessary: if we don't break it now, the
following commits (which remove the usr part from various variables)
_will_ break it.
At the same time as creating this symlink, we have to update the
external toolchain wrapper and the external toolchain symlinks to go
one directory less up. Indeed, $(HOST_DIR) is one level less up than
it was before.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that all packages have been migrated to the new gettext logic, we
can remove the BR2_NEEDS_GETTEXT and BR2_NEEDS_GETTEXT_IF_LOCALE
variables.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This new boolean is true if the toolchain provides a built-in
full-featured implementation of gettext (glibc), and false if only a
stub implementation is provided (uclibc, musl).
This will be used in follow-up commits to decide whether libintl needs
to be built by gettext or not.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Static build with external musl toolchain leaves a dangling symlink to
libc.so. Don't create that symlink on static build.
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We do not support uClibc-ng/musl C library version choice support,
do the same for GNU C Library.
No legacy handling required as only version choice is removed.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: move 3.2 kernel headers dependency to the libc choice in
toolchain/toolchain-buildroot/Config.in file, and added a Config.in
comment about it.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove mention of toolchains the we don't have.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since glibc 2.17, executable link command need not include the -lrt option for
clock_* system calls. As a result, over time less and less software packages
bother to check whether to toolchain needs -lrt. We are now at a point where
maintainers refuse to add this complexity into their build system. This
requires Buildroot to carry patches fixing this issue indefinitely.
glibc 2.17 is now 4.5 years old. There is no reason to use an older version
with current software.
This commit removes the predefined profile for CodeSourcery sh toolchain that
is based on glibc 2.16. One may still use the custom external toolchain
support in Buildroot to get this toolchain back, and deal with any build
issues that this toolchain causes.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since glibc 2.17, executable link command need not include the -lrt option for
clock_* system calls. As a result, over time less and less software packages
bother to check whether to toolchain needs -lrt. We are now at a point where
maintainers refuse to add this complexity into their build system. This
requires Buildroot to carry patches fixing this issue indefinitely.
glibc 2.17 is now 4.5 years old. There is no reason to use an older version
with current software.
This commit removes the predefined profile for CodeSourcery x86 toolchain that
is based on glibc 2.16. One may still use the custom external toolchain
support in Buildroot to get this toolchain back, and deal with any build
issues that this toolchain causes.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As GCC 7 is now available in Buildroot, update the definition for
BR2_TOOLCHAIN_HAS_GCC_BUG_64735 as the bug #64735 is fixed in GCC 7.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The external toolchain code has some logic to calculate the correct name
for the dynamic linker symbolic link that needs to be created when the
musl C library is being used. There was already some handling for the
mipsel+soft-float case, but not for the mips+soft-float case. Due to
this, the symbolic link was incorrectly named, and programs were
referencing an non-existing file.
Reported-by: Florent Jacquet <florent.jacquet@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove upstream patches:
831-ARM-PR-target-70473-Reduce-size-of-Cortex-A8-automat.patch
870-xtensa-Fix-PR-target-78118.patch
871-xtensa-Fix-PR-target-78603.patch
890-fix-m68k-compile.patch:
1701058da9
892-libgcc-mkmap-symver-support-skip_underscore.patch:
6c8f362e1f
893-libgcc-config-bfin-use-the-generic-linker-version-in.patch:
966d046c08
894-libgcc-fix-DWARF-compilation-with-FDPIC-targets.patch:
397d0e43ab
895-bfin-define-REENTRANT.patch:
da89a4dcdf
940-uclinux-enable-threads.patch:
b9ce54109e
941-mips-Add-support-for-mips-r6-musl.patch:
8371706509
Remove obsolete patches:
301-missing-execinfo_h.patch: boehm-gc removed from gcc sources:
baf7122876
830-arm_unbreak_armv4t.patch: SUBTARGET_CPU_DEFAULT removed:
ff3caa3ade
Add a new patch to allow to build gcc 7.1 without extracting gcc/testsuite
directory.
This new gcc version require a kernel patch [1] to avoid a build issue with
____ilog2_NaN symbol. The following kernel version contain contain already
this patch :
4.11, 4.10.6, 4.9.18, 4.4.57, 3.18.50 and 3.12.73.
To build a toolchain based on gcc 7 and uClibc-ng 1.0.24, the patch [2] is
required to avoid a build issue due to missing aligned_alloc() definition.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=474c90156c8dcc2fa815e6716cc9394d7930cb9c
[2] https://cgit.openadk.org/cgi/cgit/uclibc-ng.git/commit/?id=5b0f49037e8ea8500b05c8f31ee88529ccac4cee
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Theodore Ateba <tf.ateba@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The libc-compat.h first appeared in kernel version 3.12. Trying to build a
musl toolchain using earlier headers leads to the following failure:
/bin/sed: can't read .../output/host/usr/arm-buildroot-linux-musleabi/sysroot/usr/include/linux/libc-compat.h: No such file or directory
package/pkg-generic.mk:266: recipe for target '.../output/build/toolchain/.stamp_staging_installed' failed
Don't apply the sed patch to older headers.
Reported-by: Florent Jacquet <florent.jacquet@free-electrons.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
An autobuilder exception has been added to avoid testing qt gui module
with the CodeSourcery NiosII toolchain. This allow to remove the
BR2_TOOLCHAIN_HAS_BINUTILS_BUG_19405 symbol.
This reverts commit 5dce3c05b5.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current URL returns error 403: Forbidden, so switch to https.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current URL returns error 403: Forbidden, so switch to https.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current URL returns error 403: Forbidden, so switch to https.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested with qemu_nios2_10m50_defconfig and Qemu 2.9.0 release.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current URL returns error 403: Forbidden, so switch to https.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit ba6bac1383 made a change in copying of
the dynamic loader, with the goal of reducing toolchain-specific fixups.
Any ld*.so file found in the toolchain's lib directory would be copied to
the staging/lib directory.
For the toolchains that previously needed fixup, this new behavior is fine.
The reason they needed fixup was that the normal copy action did not include
any dynamic loader.
However, for certain other toolchains this new behavior actually breaks
things: regardless of ARCH_LIB_DIR, which may be lib64 instead of lib, the
dynamic loader from lib is copied _over_ any previously correct dynamic
loader.
This has been witnessed with the CodeSourcery x86_64 and
CodeSourcery MIPS64 toolchains. In both cases, a 32-bit dynamic loader was
copied to staging/lib, while a 64-bit version was expected.
Fix the problem by only performing this explicit dynamic loader copy if no
dynamic loader is found in staging/lib.
Fixes http://autobuild.buildroot.net/results/8bf/8bffe54032aad9cc710a22411ef3bff4a2c93e55/
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
copy_toolchain_lib_root handles symlinks by recreating them, disregarding
the original destination and assuming the destination is in the same
directory as the link itself.
When a library link points to the real library file in another directory,
for example:
usr/lib/octeon2/libcrypt.so -> ../../../lib32/octeon2/libcrypt.so.1
then the link created by copy_toolchain_lib_root is broken.
It is more robust to copy the symlink to keep the destination intact. The
destination path should be present, possibly through other symbolic links.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The input to copy_toolchain_lib_root is not one library, not a list of
libraries, but a library name pattern with glob wildcards.
This pattern is then passed to 'find' to get the actual list of libraries
matching the pattern. Reflect this using an appropriate variable name.
Note: if the root of the buildroot tree contains a file matching one of
these library patterns, the copying of libraries from staging to target will
not be correct. It is not impossible to fix that, e.g. using 'set -f', but
maybe it's not worth it.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
copy_toolchain_lib_root has slightly different logic depending on the type
of library object: file or link. All actions related to links are not
relevant in case you are working with a file. Hence, try to increase clarity
by not executing unnecessary lines in the 'file' case.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A previous commit rewrote broken symbolic links in staging, caused by a
non-singular ARCH_LIB_DIR. In this case, the symbolic links are typically
using one or more intermediate directory symlinks, which can be simplified
using the newly introduced simplify_symlink helper.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The external toolchain logic flattens the directory layout in the staging
directory. Regardless of the number of levels present in the extracted
toolchain, libraries are always copied to lib/ and usr/lib/, and directory
symbolic links are provided to make the original paths available as well.
Due to this, the same library may be reachable through a number of paths:
one path without any symbolic link, and one or more paths using directory
symlinks.
Using a direct path in a symlink destination is generally preferred because
it is clearer, but it is also more robust against accidental removal of an
intermediate directory symlink.
Introduce a helper function to simplify a symlink's destination to such a
direct path. This function will be used in a subsequent patch.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The toolchain from the Cavium Octeon SDK has a sysroot layout as follows:
./lib32
./lib32/octeon2
./lib32-fp
./lib64
./lib64/octeon2
./lib64-fp
./usr
./usr/lib
./usr/lib32
./usr/lib32/octeon2
./usr/lib32-fp
./usr/lib64
./usr/lib64/octeon2
./usr/lib64-fp
./usr/bin
./usr/bin32
./usr/bin32-fp
./usr/bin64-fp
./usr/libexec
./usr/libexec32
./usr/libexec32-fp
./usr/libexec64-fp
./usr/sbin
./usr/sbin32
./usr/sbin32-fp
./usr/sbin64-fp
./usr/include
./usr/share
./sbin
./sbin32
./sbin32-fp
./sbin64-fp
./etc
./var
with the following selections:
- lib64 : default
- lib64/octeon2 : -march=octeon2
- lib64-fp : -march=octeon3
- lib32 : -mabi=n32
- lib32/octeon2 : -mabi=n32 -march=octeon2
- lib32-fp : -mabi=n32 -march=octeon3
In case of '-mabi=n32 -march=octeon2' (but same is true for n64+octeon2)the
original Buildroot toolchain logic would copy both the libraries in
lib32 as the subdirectory lib32/octeon2, which means that every library is
installed twice (but only one of each is really needed).
While ARCH_LIB_DIR is determined by the location of libc.a, which in this
case is effectively:
<sysroot>/usr/lib32/octeon2/libc.a
the variable only retains 'lib32' and not 'lib32/octeon2' as expected.
To make Buildroot cope with this style of toolchain layout, we need to adapt
the calculation of ARCH_LIB_DIR to also include the second part.
This, in turn, means that ARCH_LIB_DIR is no longer guaranteed to be a
singular path component, resulting in some additional changes.
Certain older Linaro toolchains actually had the same layout. Libraries were
located in lib/<tuple> rather than lib directly. Previously, this was
handled by adding a toolchain-specific fixup that creates a symlink
lib/<tuple> -> lib, but with this patch this would no longer be needed.
Note that one difference with the Octeon case is that these Linaro
toolchains are not actually multilib, i.e. there is just one location with
the libraries and thus there is no problem with duplicated libraries.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The helper function copy_toolchain_sysroot has some logic to transform a
path into a number of '../' components based on the depth of that path.
As this same logic will be needed in another place in a subsequent patch,
extract it into a separate helper relpath_prefix.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Normally, the Buildroot toolchain logic copies all required libraries from
the external toolchain to the staging directory, including the dynamic
loader ld-*.so.
There are cases, however, where the dynamic loader is _not_ automatically
copied to staging. This happens when the dynamic loader is not inside
ARCH_LIB_DIR itself (e.g. lib64), but instead resides in 'lib' (assume, of
course, that ARCH_LIB_DIR != 'lib').
Currently, this is fixed in a toolchain-specific fixup, e.g. by recreating a
missing symlink or copying over a missing file. Such toolchain specific
fixups are not very nice.
Moreover, in a subsequent patch, the value of ARCH_LIB_DIR changes for some
toolchains, causing them to have the same problem of a missing dynamic
loader. This used to be the case for older Linaro toolchains with libraries
in 'lib/<tuple>': Buildroot used to set ARCH_LIB_DIR=lib but the mentioned
patch changes it to 'lib/<tuple>' instead. As a result, the files directly
under 'lib/' will no longer be copied. There should be none, but the dynamic
loader is a notable exception.
[Note: support for these older Linaro toolchain has been removed in 2016.11]
Instead, copy over the ld.so file(s)/link(s) from the extracted toolchain
into staging, in the central copy_toolchain_sysroot function. The existing
toolchain logic will then handle the copy of these files from staging to
target.
This means the toolchain-specific fixups can be removed.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The copy_toolchain_sysroot helper features a complex rsync loop that copies
various directories from the extracted toolchain to the staging directory.
The complexity mainly stems from the fact that we support multilib toolchain
tarballs but only copy one of the multilib variants into staging.
Increase understandability of this logic by explicitly restricting the
rsync excludes to the iteration of the for loop they are relevant for.
Additionally, update the function comment.
Note: all attempts to reduce duplication between both rsync while keeping
things nice and readable failed. One has to be extremely careful regarding
line continuation, indentation, and single vs double quoting. In the end, a
split up rsync seemed most clean.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check_arm_abi function takes as second argument the path to the
cross-readelf, but does not use it. Therefore, this commit gets rid of
this unnecessary argument.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current test to verify if the toolchain uses musl or not is based on
checking if /lib/libc.so or /lib/libm.so exist in the sysroot. However,
some toolchains (notably Crosstool-NG ones) put these libraries in
/usr/lib/.
To fix this, build a minimal C program and check if the program
interpreter contains /lib/ld-musl.
Signed-off-by: Ilya Kuzmich <ilya.kuzmich@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
TOOLCHAIN_EXTERNAL_READELF is defined to
$(TOOLCHAIN_EXTERNAL_CROSS)readelf$(TOOLCHAIN_EXTERNAL_SUFFIX), where
TOOLCHAIN_EXTERNAL_SUFFIX is .br_real for Buildroot
toolchains. However, this is bogus, because readelf is not wrapped by
the Buildroot toolchain wrapper, so "<arch>-readelf.br_real" never
exists.
Therefore, it should simply be defined as
$(TOOLCHAIN_EXTERNAL_CROSS)readelf. Currently,
TOOLCHAIN_EXTERNAL_READELF is not used anywhere, so it wasn't visible,
but a follow-up commit will make use of it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The somewhat complicated sed expression has been removed in commit
06cd604ec6 ("toolchain/external: use
-dumpversion to check gcc version"), so let's remove the comment that
was explaining this sed expression.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, `--version` option is used and later matched with a regex to get
the actual gcc version. There's a dedicated gcc option to do exactly that:
`-dumpversion`.
Also `--version` may return a string customised by a vendor that provides
the toolchain, which makes the current regex approach error prone. In
fact, this situation has been seen with a real customised toolchain.
Signed-off-by: Krzysztof Konopko <kris@youview.com>
Signed-off-by: Tomasz Szkutkowski <tomasz.szkutkowski@youview.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit provides basic support for the C-SKY architecture.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
[Thomas: minor tweaks.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Function copy_toolchain_sysroot, which is in charge of copying the relevant
bits from the external toolchain to the staging directory, performs an rsync
loop of various directories and excludes the pattern 'usr/lib/locale' with
the intention of skipping the directory <toolchain>/usr/lib/locale.
However, while this worked in the original commit, commit
5628776c4a broke it inadvertently. The
relevant part of the diff:
- rsync -au --chmod=Du+w --exclude 'usr/lib/locale' \
- $${ARCH_SYSROOT_DIR}/$$i $(STAGING_DIR)/ ; \
+ rsync -au --chmod=Du+w --exclude 'usr/lib/locale' \
+ --exclude lib --exclude lib32 --exclude lib64 \
+ $${ARCH_SYSROOT_DIR}/$$i/ $(STAGING_DIR)/$$i/ ; \
Notice how the source directory now contains a trailing slash, which impacts
the way the exclude rules are interpreted. Previously, when 'i' was 'usr',
the exclude of 'usr/lib/locale' would find a match. With the trailing slash,
there will never be a match, unless for a directory 'usr/usr/lib/locale'.
The right rule would have been '--exclude lib/locale'.
However, just that fix does not solve the problem in all cases, in
particular in the (common) case where ARCH_LIB_DIR is 'lib'. This is due
another change in that commit, changing the iterated values of the above
rsync:
- for i in etc $${ARCH_LIB_DIR} sbin usr ; do \
+ for i in etc $${ARCH_LIB_DIR} sbin usr usr/$${ARCH_LIB_DIR}; do \
Due to the fact that we rsync both 'usr' as 'usr/lib' (assuming ARCH_LIB_DIR
is 'lib') we need to add the correct exclude in both cases. But the exclude
is different for both. When i == 'usr', the correct exclude rule would be
'--exclude lib/locale' while when i == 'usr/lib' the correct rule would be
'--exclude locale'.
Since we would like to avoid separate cases for this, use the following
exclude: '--exclude locale/'. The trailing slash will make sure only
directories called 'locale' will match. The targeted directories are then
usr/lib/locale and usr/share/locale. The latter directory was not matched
originally, but it should not hurt changing that.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As discussed with Thomas Petazzoni, we can reduce the nesting level by early
returning on an invalid iteration.
I did not move the 'else' case (the common case) outside the if-else because
it would make the code less symmetrical and IMO makes it _less_ clear.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The handling of RPATH in cmake-3.7 has changed drastically, causing a
slew of build failures dues to libraries from the host being pulled in:
- domoticz : http://autobuild.buildroot.org/results/fd0/fd0ba54c7abf973691b39a0ca1bb4e07d749593a/
- freerdp : http://autobuild.buildroot.org/results/5d4/5d429d0e288754a541ee5d8be515454c5fccd28b/
- libcec : http://autobuild.buildroot.org/results/3f3/3f3593bab7734dd274faf5b5690895e9424cbb89/
- and so on...
The bug was reported upstream [0], which dismissed it altogether [1] as
being expected behaviour, quoting:
I don't think there is anything wrong with that change on its own.
It merely exposed some existing behavior in a new case.
Instead, upstream suggested in that same message that a platform
definition be used instead, quoting:
If a toolchain file specifies CMAKE_SYSTEM_NAME such that a custom
`Platform/MySystem.cmake` file is loaded then the latter can set
them as needed for the target platform.
So here we are doing so:
- we add a new platfom definitions that inherits from the Linux one,
then overrides the problematic settings;
- we change our toolchain file to use that platform instead;
- we tell cmake where to find additional modules, so that it can find
our custom platform file.
This has been tested to work in the following conditions:
- pre-installed host cmake, versions 3.5.1 (Ubuntu 16.04) and 3.7.2
(manually built)
- internal cmake, versions 3.6.3 (the current version as of this
patch) and 3.7.2 (with the followup patches).
Thanks to Jörg, Ben and Baruch for the help investigating the issue.
Special thanks to Jörg for handling the discussion with upstream and
pointing to the relevant messages! :-)
[0] http://public.kitware.com/pipermail/cmake/2017-February/064970.html
[1] http://public.kitware.com/pipermail/cmake/2017-February/065063.html
To be noted: Thomas suggested we set these directly in the toolchain
file. Unfortunately, wherever we put those settings in the toolchain
file, this does not work.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Ben Boeckel <mathstuf@gmail.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libanl.so is needed for asynchronous network address and service
translation, declared in netdb.h
Signed-off-by: Jesper Bækdahl <jbb@gamblify.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 76838f6341.
The commit referenced above explicitly states that the function was
copied as-is from the gcc source code at the time. And indeed that is
exactly how the function appeared in gcc in commit
e3e8c48c4a494d9da741c1c8ea6c4c0b7c4ff934.
However, our toolchain wrapper is "GPLv2 only", while the file this function
was copied from is "GPLv3 or later". As such we can't include that function
and still comply to both licenses.
Furthermore, the code is far from optimum.
Since this feature is not release-critical, revert it until we re-implement
it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Tested with qemu-2.7.1-2.fc25 and the qemu_aarch64_virt_defconfig
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested with qemu-2.7.1-2.fc25 and the qemu_arm_vexpress_defconfig
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The rework done on commit
accba02a47 ("toolchain: add option for
toolchains affected by GCC PR libstdc++/64735") by me was wrong. The
BR2_TOOLCHAIN_HAS_GCC_BUG_64735 option should be enabled when the bug is
present in the toolchain, not the opposite.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
exception_ptr, nested_exception, and future from libstdc++ are not
available for architectures not supporting always lock-free atomic ints
before GCC 7.
Bug report:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=64735
Fix available starting from GCC 7 (not yet released):
https://gcc.gnu.org/viewcvs/gcc?view=revision&revision=244051
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas:
- directly define the value where BR2_TOOLCHAIN_HAS_GCC_BUG_64735
rather than having additional patches touching affected architectures
Config.in files
- add a better comment above the Config.in option.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The use of the __DATE__ and __TIME__ macros are one of the most common
sources of non-reproducible binaries. In order to fix that, gcc 7 supports
the SOURCE_DATE_EPOCH variable:
https://gcc.gnu.org/git/?p=gcc.git;a=commitdiff;h=e3e8c48c4a494d9da741c1c8ea6c4c0b7c4ff934
This patch take advantage of toolchain-wrapper to provide support of
SOURCE_DATE_EPOCH to older gcc versions.
Function get_source_date_epoch() come directly from gcc git.
This work was sponsored by `BA Robotic Systems'.
[Peter: use sizeof for character array sizes, make function static,
extend commit message, add upstream gcc commit]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Sync external prebuilt toolchain with the one we now build in Buildroot,
i.e. arc-2016.09. Since that prebuilt toolchain finally has IPv6 enabled
it works pretty fine for building packages in Buildroot.
Still note:
1) There might be subtle differences between uClibc configuration
compared to Buildroot's one.
2) A couple of patches we apply on top of Builroot-built toolchain
are obviously missing in the prebuilt version - they will be
available in the next release.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Vlad Zakharov <vzakhar@synopsys.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
uClibc-ng from 1.0.22 and up supports aarch64 architecture.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The config for ISA choice is removed for a long time as
the buildsystem does not pass -march=mips* to the compiler anymore.
For mips{32,64}r6 support NAN selection is required.
Tested with qemu mips32/mips64 defconfigs.
A small patch is required. Bug found while testing qemu defconfigs.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The variables LIBC_A_LOCATION and ARCH_LIBC_A_LOCATION were killed in commit
646bd86908 but the corresponding descriptions
were never removed.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for OpenRISC. See here for more details about
OpenRISC http://openrisc.io.
All buildroot included upstream binutils versions are supported.
Gcc support is not upstream, to be able to enable musl C library
support later, we use the branch with musl support.
At the moment it is possible to build a musl based toolchain,
but bootup in Qemu fails.
Gdb is only working to debug bare-metal code, there is no support
for gdbserver/gdb on Linux, yet.
[Peter: drop ?= for GCC_SOURCE]
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also...
- Fix a typo in Config.in
- Take into account the host's architecture to download the x86 or
x86_64 version. This makes the IA32 libs dependency in unnecessary.
[Peter: fix kernel headers comment as pointed out by Romain]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also...
- Fix a typo in Config.in
- Take into account the host's architecture to download the x86 or
x86_64 version. This makes the IA32 libs dependency in unnecessary.
[Peter: fix kernel headers comment as pointed out by Romain]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Keep BR2_TOOLCHAIN_HAS_BINUTILS_BUG_19405 since it's not fixed in
Binutils 2.26.
Runtime tested with an experimental version of Qemu 2.7 for Nios2.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The upstream link to download musl-cross prebuilt toolchain is dead [1] and
there no new download location. Also the last prebuilt toolchain use musl
1.1.12 version which is not uptodate (currently 1.1.15).
Remove this support and recommend to use Buildroot toolchain instead.
[1] https://googledrive.com/host/0BwnS5DMB0YQ6bDhPZkpOYVFhbk0
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In 61cb120 (toolchain/wrapper: extend paranoid check to -isystem), we
introduced a {str,len} tuple to check the various arguments pased to
gcc, to avoid hard-coding an ever-growing, long list of those args
directly in the condition check.
Now, we're left with a long list of unsafe paths, somehow hidden within
the code, which can use the same mechanism we use for arguments.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In 61cb120 (toolchain/wrapper: extend paranoid check to -isystem), we
introduced a {str,len} tuple to check the various arguments passed to
gcc, to avoid hard-coding an ever-growing, long list of those args
directly in the condition check.
It was made specific to the arguments (the structure member is named
'arg'), but can also be used to store the unsafe paths as well.
Also, that piece is almost un-documented.
Rename the structure member so that it is more generic, and add a bit of
comments to explain the whole of it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This toolchain uses GCC 4.8.x, which doesn't support the ARMv8 cores.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Linaro toolchains are currently only available on ARMv7-A, but can
in fact also be used to generate 32 bits code for ARMv8 platforms. This
commit therefore adjusts their architecture dependency.
Example, a 32 bits ARM build produces a 32 bits busybox binary:
$ file output/target/bin/busybox
output/target/bin/busybox: setuid ELF 32-bit LSB executable, ARM, EABI5 version 1 (SYSV), dynamically linked, interpreter /lib/ld-linux-armhf.so.3, for GNU/Linux 2.6.32, BuildID[sha1]=16a7a70eb9cac08759e52a260478b9c287f59238, stripped
Which was built for Cortex-A72:
$ ./output/host/usr/bin/arm-linux-gnueabihf-readelf -A output/target/bin/busybox
Attribute Section: aeabi
File Attributes
Tag_CPU_name: "Cortex-A72"
Tag_CPU_arch: v8
Tag_CPU_arch_profile: Application
Tag_ARM_ISA_use: Yes
Tag_THUMB_ISA_use: Thumb-2
Tag_FP_arch: FP for ARMv8
Tag_ABI_PCS_wchar_t: 4
Tag_ABI_FP_rounding: Needed
Tag_ABI_FP_denormal: Needed
Tag_ABI_FP_exceptions: Needed
Tag_ABI_FP_number_model: IEEE 754
Tag_ABI_align_needed: 8-byte
Tag_ABI_align_preserved: 8-byte, except leaf SP
Tag_ABI_enum_size: int
Tag_ABI_VFP_args: VFP registers
Tag_CPU_unaligned_access: v6
Tag_MPextension_use: Allowed
Tag_Virtualization_use: TrustZone and Virtualization Extensions
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
My local 'next' branch was not uptodate, so the previous merge was missing
the most recent changes.
Thanks to François Perrad for noticing.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Tested with Qemu v2.7.0 and the qemu_aarch64_virt_defconfig
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested with qemu-2.4.1-11.fc23 and the qemu_arm_vexpress_defconfig
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This toolchain has many problems which are fixed in contemporary gcc
and uClibc-ng. In addition, several hacks are needed to be able to
work with this toolchain. All these hacks are removed as well. Also
the package exceptions for this toolchain are removed.
The BR2_BFIN_INSTALL_FDPIC_SHARED and BR2_BFIN_INSTALL_FLAT_SHARED
options don't get a legacy entry. For the ADI toolchain, there already
is a legacy entry, so it doesn't make sense to add it twice. For other
external toolchains, these options didn't actually work, because they
rely on the specific layout of the ADI toolchain.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We currently support gcc as old as 4.3. However, Buildroot works
perfectly well with even older gcc versions (tested with 4.1). So we
can add an option BR2_TOOLCHAIN_EXTERNAL_GCC_OLD to support that. The
help text of this option is written with plenty of discouragement.
We use _OLD and not something like _PRE_4_3, because at some point we
will likely remove the 4.3 option and what would then require a name
change.
We don't set any _AT_LEAST option in this case because it's no use -
there is no lower bound on the version in this case. We therefore leave
BR2_TOOLCHAIN_GCC_AT_LEAST empty (the implicit default). When it is
empty, we don't do a version check at all in check_gcc_version
(previously we errored out when it was empty).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Arago toolchains are no longer maintained and haven't been updated
for a long time.
With this removal, all the legacy toolchain-external support can be
removed as well.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Synopsys external toolchain for
the ARC architecture.
The legacy implementation is removed.
Note that this toolchain is marked as BROKEN, but 2016.09 seems about
to be released so maybe it will be unbroken soon.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package to support custom external toolchains.
The legacy implementation is removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the pre-built Musl external
toolchains.
The legacy implementation is removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Sourcery CodeBench external
toolchain for the i386/x86_64 architecture.
The legacy implementation is removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Sourcery CodeBench external
toolchain for the AMD-64 architecture.
The legacy implementation is removed.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Sourcery CodeBench external
toolchain for the SuperH 4a architecture.
The legacy implementation is removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Sourcery CodeBench external
toolchain for the nios-II architecture.
The legacy implementation is removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Codescape MTI external toolchain
for the MIPS architecture.
The legacy implementation is removed.
The Codescape hacks for IMG and MTI are duplicated.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Codescape IMG external toolchain
for the MIPS architecture.
The legacy implementation is removed.
The Codescape hacks for IMG and MTI are duplicated.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Sourcery CodeBench external
toolchain for the MIPS architecture.
The legacy implementation is removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Analog Devices external toolchain
for the Blackfin architecture.
The legacy implementation is removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Linaro external toolchain for the
ARM Big-endian architecture.
The legacy implementation is removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Sourcery CodeBench external
toolchain for the ARM architecture.
The legacy implementation is removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Linaro external toolchain for the
ARM architecture.
The legacy implementation is removed.
The comment about availability is duplicated for arm and armeb.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Sourcery CodeBench external
toolchain for the AArch64 architecture.
The legacy implementation is removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Linaro external toolchain for
the AArch64 architecture.
The legacy implementation is removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The toolchain-external-package infrastructure is just a copy of the
toolchain-external commands, replacing TOOLCHAIN_EXTERNAL by $(2)
and adding double-dollars everywhere.
toolchain-external itself is converted to a virtual package, but it
is faked a little to make sue the toolchains that haven't been
converted to toolchain-external-package yet keep on working.
The TOOLCHAIN_EXTERNAL_MOVE commands don't have to be redefined
for every toolchain-external-package instance, so that is moved
out into the common part of pkg-toolchain-external.mk.
The musl-compat-headers dependency stays in the toolchain-external
package itself.
The musl ld link is duplicated in the legacy toolchain-external and
the toolchain-external-package, because they have separate hooks.
The handling of TOOLCHAIN_EXTERNAL_BIN deserves some special attention,
because its value will be different for different
toolchain-external-package instances. However, the value only depends
on variables that are set by Kconfig (BR2_TOOLCHAIN_EXTERNAL_PREFIX
and BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD) so it can easily be used in
the generic part. So we don't have to do anything specific for this
variable after all.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Romain Naour <romain.naour@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
pkg-toolchain-external.mk will be used later to define the
toolchain-external-package infra. Most of the variable and macro
definitions are shared with the legacy generic-package based
toolchain-external. Move these to pkg-toolchain-external.mk.
pkg-toolchain-external.mk is included implicitly by the include
toolchain/*/*.mk in the top-level Makefile. The order of inclusion is
not defined, but that doesn't matter because none of the variables
defined in pkg-toolchain-external.mk are used in conditions or in
rules in toolchain-external.mk, only in recursively-expanded
variables.
No functional changes at all. The output of 'make -qp' hasn't changed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Arnout: split off into separate patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the toolchain-external logic will be split into separate packages,
the order in which things are defined in toolchain-external.mk no
makes less sense. So reorder things in a more logical fashion.
Also add a few more comments to the different sections.
No functional changes at all. The output of 'make -qp' hasn't changed,
except for the order of arguments in
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Arnout: split off into separate patch, slightly change some comments,
reordered some parts]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
