Commit 519d83bfa0 adds support for GCC
6. Add an GCC 6.x option for external toolchains, too.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The extracted toolchain sources contains a single symlink in the
aarch64-linux-gnu/libc/lib directory wich is lost during Buildroot's
staging install.
aarch64-linux-gnu/libc/lib/ld-linux-aarch64.so.1 -> ../lib64/ld-2.18.so
Add a custom post install staging and target hooks to create it
manually.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: also make the same tweak in the target.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds the support for gcc 6. This release allows to remove
a large number of our gcc patches, mainly thanks to the Xtensa and
musl related patches being merged upstream.
Patches kept with no changes:
100-uclibc-conf.patch
301-missing-execinfo_h.patch
810-arm-softfloat-libgcc.patch
830-arm_unbreak_armv4t.patch
840-microblaze-enable-dwarf-eh-support.patch
860-cilk-wchar.patch
890-fix-m68k-compile.patch
Patches dropped because they have been merged upstream, or were
already upstream backports:
120-gcc-config.gcc-fix-typo-for-powerpc-e6500-cpu_is_64b.patch (merged)
850-libstdcxx-uclibc-c99.patch (merged in a different form, see
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58393)
870-xtensa-add-mauto-litpools-option.patch (upstream backport)
871-xtensa-reimplement-register-spilling.patch (upstream backport)
872-xtensa-use-unwind-dw2-fde-dip-instead-of-unwind-dw2-.patch (upstream backport)
873-xtensa-fix-_Unwind_GetCFA.patch (upstream backport)
874-xtensa-add-uclinux-support.patch (upstream backport)
900-libitm-fixes-for-musl-support.patch (upstream backport)
901-fixincludes-update-for-musl-support.patch (upstream backport)
902-unwind-fix-for-musl.patch (upstream backport)
903-libstdc++-libgfortran-gthr-workaround-for-musl.patch (upstream backport)
904-musl-libc-config.patch (upstream backport)
905-add-musl-support-to-gcc.patch (upstream backport)
905-add-musl-support-to-gcc.patch (upstream backport)
906-mips-musl-support.patch (upstream backport)
907-x86-musl-support.patch (upstream backport)
908-arm-musl-support.patch (upstream backport)
909-aarch64-musl-support.patch (upstream backport)
Successfully build-time and run-time tested with
qemu_arm_vexpress_defconfig, using gcc 6.x, both in uClibc and musl
configurations.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The sysroot toolchain support check is duplicated at two locations in
the external toolchain infra. So move it inside the
check_unusable_toolchain helper that is called when the toolchain
package is configured (TOOLCHAIN_EXTERNAL_CONFIGURE_CMDS).
The check in TOOLCHAIN_EXTERNAL_INSTALL_SYSROOT_LIBS can be safely
removed since it's already done in check_unusable_toolchain helper.
The check in TOOLCHAIN_EXTERNAL_INSTALL_TARGET_LIBS was removed by
2a87b64f8e.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some toolchain can't be used by Buildroot due to sysroot location
issue, so the $(ARCH)-linux-gnu-gcc -print-file-name=libc.a command
return only "libc.a"
This lead to an error during the header check version helper,
so these toolchains can't be imported into Buildroot.
cc1: fatal error: $PWD/libc.a/usr/include/linux/version.h: No such file or directory
compilation terminated.
support/scripts/check-kernel-headers.sh: line 38: /tmp/check-headers.4V5PPF: Permission denied
This issue happen with the first linaro 2015.11 [1] release and
CodeSourcery standard edition [2].
Here is the sysroot directory tree for linaro 2015.11:
$ ls libc/arm-linux-gnueabihf
etc lib sbin usr var
Here is the sysroot directory tree for CodeSourcery standard:
$ ls libc/sgxx-glibc
etc lib lib64 sbin usr var
Add a check to error out with an explicit error message
The check don't use toolchain_find_libc_a function directly since
"realpath -f" is used internally and return an absolute path.
[1] https://bugs.linaro.org/show_bug.cgi?id=1995#c7
[2] http://lists.busybox.net/pipermail/buildroot/2014-October/110696.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When a message with MESSAGE, we can print it as the first command of
the command sequence, and in this case, we don't need to use a shell
continuation.
In one case, the call to MESSAGE is moved a few lines up in the
sequence of commands.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As suggested by Arnout, this commit renames:
- TOOLCHAIN_EXTERNAL_INSTALL_BFIN_FDPIC to
TOOLCHAIN_EXTERNAL_INSTALL_TARGET_BFIN_FDPIC
- TOOLCHAIN_EXTERNAL_INSTALL_BFIN_FLAT to
TOOLCHAIN_EXTERNAL_INSTALL_TARGET_BFIN_FLAT
Which makes it clear that those variables are installing libraries to
the target, and make their naming more consistent with the naming of
other variables in the file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the alignment of toolchain library location in target and staging,
there is no need anymore for the distinction between LIB_EXTERNAL_LIBS and
USR_LIB_EXTERNAL_LIBS. Unify them into TOOLCHAIN_EXTERNAL_LIBS.
Related, update the help text of
BR2_TOOLCHAIN_EXTRA_TOOLCHAIN_EXTERNAL_LIBS.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The toolchain-external logic is roughly:
- populate the staging dir by rsyncing the entire ${ARCH_LIB_DIR} and
usr/${ARCH_LIB_DIR} from sysroot.
- populate the target dir by explictly copying some libraries from sysroot
into target/lib and some other libraries in target/usr/lib, the split
being hardcoded into buildroot regardless of the location in the sysroot.
This means that a library libfoo could be located in:
staging/lib/libfoo.so
target/usr/lib/libfoo.so
When debugging an application that links against this library, gdb will
fruitlessly search for 'usr/lib/libfoo.so' in staging, and then suggest to
use 'set solib-search-path' which is a hack, really.
To solve the problem, we need to make sure that libraries from the toolchain
are installed in the same relative location in staging and target.
Achieve this by:
- replacing the convoluted search for libraries using for+find in sysroot
with a simple find in staging.
- determining DESTDIR for each library individually based on the location in
staging.
- treating LIB_EXTERNAL_LIBS and USR_LIB_EXTERNAL_LIBS equivalently
These changes also allow for the removal of most arguments to
copy_toolchain_lib_root in the method itself and their callers.
Test procedure:
- set configuration for a given toolchain
- make clean toolchain
- find output/target | sort > /tmp/out-before
- apply patch
- make clean toolchain
- find output/target | sort > /tmp/out-after
- diff -u /tmp/out-before /tmp/out-after
The only changes should be some libraries moving from lib to usr/lib or vice
versa. Notable examples being libstdc++ and libatomic.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- use -L instead of -follow in the find invocation, as suggested by
Arnout.
- move the BR2_STATIC_LIBS condition as a make condition rather than
a shell condition, as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The installation of the gdbserver binary has no relation to the installation
of the target libraries. Moving it to a separate define improves the
understandability of the code and makes later refactoring easier.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[Thomas:
- move the BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY condition as a make
condition rather than a shell condition, as suggested by Romain
Naour.
- rename the TOOLCHAIN_EXTERNAL_INSTALL_GDBSERVER variable to
TOOLCHAIN_EXTERNAL_INSTALL_TARGET_GDBSERVER as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For external Blackfin toolchains with BR2_BFIN_INSTALL_FDPIC_SHARED set,
the FDPIC shared libraries are currently only copied to the target
directory, not to staging.
For debugging purposes, an unstripped copy in staging is necessary.
Moreover, this change will simplify a subsequent change that lines up the
location of shared libraries between target and staging directories.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In TOOLCHAIN_EXTERNAL_INSTALL_TARGET_LIBS, ARCH_SUBDIR is calculated but not
used, and can thus be removed. Since SYSROOT_DIR is only used for the
calculation of ARCH_SUBDIR, it can be removed too.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Linux kernel doesn't even support i386 anymore, there is no NPTL
support for i386 and uClibc-ng only supports NPTL on x86, so there is
essentially no usable thread implementation. Most likely glibc and
musl also don't support i386 either. So it's time to remove the
support for this architecture variant.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While musl has recently gained noMMU support for the sh2 platform, we
don't support this yet. So for the time being, let's not show musl as
an available C library on noMMU platforms. This is for example
important on ARM noMMU: ARM is supported by musl, but not its noMMU
variants.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
glibc is not available for noMMU platforms, so it doesn't make sense
to show the comment about glibc requiring dynamic libraries on noMMU
platforms.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When a toolchain is glibc based, the getent package assumes that
$(STAGING_DIR)/usr/bin contains the getent program. Unfortunately, the
Codescape MIPS toolchains do not conform with this:
$(STAGING_DIR)/usr/{bin,sbin} are empty, and instead three directories
are provided: bin-o32, bin-n32 and bin-n64 (ditto for sbin), one for
each supported MIPS ABI.
Since this is a toolchain-specific oddity, we handle it by adding a
post-install fixup hook that creates $(STAGING_DIR)/usr/{bin,sbin} as
symbolic link to the appropriate directory.
Fixes:
http://autobuild.buildroot.org/results/9c0ee836021553319f166f9de88750535aee0a58/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Until now, we were assuming that whenever you have gcc 4.8, libatomic
is available. It turns out that this is not correct, since libatomic
will not be available if thread support is disabled in the toolchain.
Therefore, __atomic_*() intrinsics may not be available even if the
toolchain uses gcc 4.8.
To solve this problem, we introduce a BR2_TOOLCHAIN_HAS_LIBATOMIC
boolean, which indicates whether the toolchain has libatomic. It is
the case when you are using gcc >= 4.8 *and* thread support is
enabled. We then use this new BR2_TOOLCHAIN_HAS_LIBATOMIC to define
BR2_TOOLCHAIN_HAS_ATOMIC.
As explained in the comment, on certain architectures, libatomic is
technically not needed to provide the __atomic_*() intrinsics since
they might be all built-in. However, since libatomic is only absent in
non-thread capable toolchains, it is not worth making things more
complex for such seldomly used configuration.
Note that we are introducing the intermediate
BR2_TOOLCHAIN_HAS_LIBATOMIC option because it will be useful on its
own for certain packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: improve Config.in comment using a suggestion from Yann.]
As we currently download the actual sources as part of saving the
legal-info, we do not check the hashes of those downloads.
That's because, during legal-info, there is not package involved, and
thus there's no path to an actual .hash file.
However, this precludes legal-info from working in off-line mode. A
subsequent patch will make it possible to do so, and actual sources will
be downloaded as another classical package download.
This will have two consequences:
- first, we will be able to add hashes for actual sources, so we can
ensure their integrity,
- second, and as a direct consequence of the above, when a .hash file
is present, it would have to list all the hashes for that package,
or that would be treated as an error.
Currently, the only package that falls in this case is the external-
toolchain, for which we have means to retrieve the sources for some of
the toolchains.
So we just add hashes for those actual external-toolchain sources we may
have to download.
Those hashes are not used for now, but they'll come into play a few
patches down.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Abele <jason@nextthing.co>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We do source the glibc and uClibc packages in the toolchain menu,
because they do provide user-visible options. However, we do not so
far source the musl Config.in file
However, in 822be87 (toolchain: include C libraries in legal-info),
a Config.in file for musl was explicitly created, so that:
- legal-info would work (needed at the time, probably no longer needed
nowadays),
- the appropriate packages are enabled, like netbsd-queue or kernel
headers.
Yet, we do not source musl/Config.in, which means we do not get
netbsd-queue or kernel-headers to be selected:
$ make distclean; make menuconfig
Toolchain --->
C library ---> musl
save-and-exit
$ grep BR2_PACKAGE_LINUX_HEADERS .config
[nothing]
$ grep BR2_PACKAGE_NETBSD_QUEUE .config
[nothing]
Fix that by sourcing musl/Config.in at the same place we source glibc
and uClibc.
Normally, we do have a check in place that verifies that a package
that is not enabled is not a dependency of another package that is
enabled. However, musl is only a dependency of host-gcc-final, which
is a host package and has no corresponding BR2_PACKAGE_HOST_GCC_FINAL.
Thus host-gcc-final is not in the PACKAGES variable, and thus does not
trigger our check.
Reported-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While the prebuilt musl toolchains provided by http://musl.codu.org/
had not been updated in a while, a new release based on musl 1.1.12
has been put online in December 2015. This commit updates our external
toolchain package to use this new pre-built toolchain.
Compared to the previous 1.1.6 toolchain, there are some changes:
- The MIPS big endian soft-float variant is no longer available.
- The Microblaze variant is no longer available.
- SuperH 4, both little and big endian, variants have been added.
- The components have been updated: gcc 5.3 is used, binutils 2.25.1,
and of course musl 1.1.12.
Besides the update itself, in this commit, we are:
- Making the musl toolchain non-selectable on MIPS big endian
soft-float.
- Making the musl toolchain actually work on MIPS little endian
soft-float, by downloading the right tarball and setting up the
right symbolic link.
- Removing support for the Microblaze variant, and adding support for
the SH4 variants.
All variants except armeb have been boot tested under Qemu, up to a
Busybox shell prompt. armeb has not been tested due to the lack of a
Qemu configuration for this architecture.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Mask out glibc for sparc as well since it's no longer available.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, Buildroot provides one BR2_ARCH_HAS_ATOMICS boolean option
to indicate whether the architecture supports atomic operations or
not. However, the reality of atomic operations support is much more
complicated and requires more than one option to be expressed
properly.
There are in fact two types of atomic built-ins provided by gcc:
(1) The __sync_*() family of functions, which have been in gcc for a
long time (probably gcc 4.1). They are available in variants
operating on 1-byte, 2-byte, 4-byte and 8-byte integers. Some
architectures implement a number of variants, some do not
implement any, some implement all of them.
They are now considered "legacy" by the gcc developers but are
nonetheless still being used by a significant number of userspace
libraries and applications.
https://gcc.gnu.org/onlinedocs/gcc/_005f_005fsync-Builtins.html
(2) The __atomic_*() family of functions, which have been introduced
in gcc 4.7. They have been introduced in order to support C++11
atomic operations. In gcc 4.8, they are available on all
architectures, either built-in or in the libatomic library part
of the gcc runtime (in which case the application needs to be
linked with -latomic). In gcc 4.7, the __atomic_*() intrinsics
are only supported on certain architectures, since libatomic did
not exist at the time.
For (1), a single BR2_ARCH_HAS_ATOMICS is not sufficient, because
depending on the architecture, some variants may or may not be
available. Setting BR2_ARCH_HAS_ATOMICS to false as soon as one of the
variant is missing would cause a large number of packages to become
unavailable, even if they in fact use only more common variants
available on a large number of architectures. For this reason, we've
chosen to introduce four new Config.in options:
- BR2_TOOLCHAIN_HAS_SYNC_1
- BR2_TOOLCHAIN_HAS_SYNC_2
- BR2_TOOLCHAIN_HAS_SYNC_3
- BR2_TOOLCHAIN_HAS_SYNC_4
Which indicate whether the toolchain support 1-byte, 2-byte, 4-byte
and 8-byte __sync_*() built-ins respectively.
For (2), we introduce a BR2_TOOLCHAIN_HAS_ATOMIC, which indicates if
the __atomic_*() built-ins are available. Note that it is up to the
package to link with -latomic when gcc is >= 4.8. Since __atomic_*()
intrinsics for all sizes are supported starting
We conducted a fairly large analysis about various architectures
supported by Buildroot, as well as with a number of different
toolchains, to check which combinations support which variant. To do,
we linked the following program with various toolchains:
int main(void)
{
uint8_t a;
uint16_t b;
uint32_t c;
uint64_t d;
__sync_fetch_and_add(&a, 3);
__sync_fetch_and_add(&b, 3);
__sync_fetch_and_add(&c, 3);
__sync_fetch_and_add(&d, 3);
__sync_val_compare_and_swap(&a, 1, 2);
__sync_val_compare_and_swap(&b, 1, 2);
__sync_val_compare_and_swap(&c, 1, 2);
__sync_val_compare_and_swap(&d, 1, 2);
__atomic_add_fetch(&a, 3, __ATOMIC_RELAXED);
__atomic_add_fetch(&b, 3, __ATOMIC_RELAXED);
__atomic_add_fetch(&c, 3, __ATOMIC_RELAXED);
__atomic_add_fetch(&d, 3, __ATOMIC_RELAXED);
__atomic_compare_exchange_n(&a, &a, 2, 1, __ATOMIC_RELAXED, __ATOMIC_RELAXED);
__atomic_compare_exchange_n(&b, &b, 2, 1, __ATOMIC_RELAXED, __ATOMIC_RELAXED);
__atomic_compare_exchange_n(&c, &c, 2, 1, __ATOMIC_RELAXED, __ATOMIC_RELAXED);
__atomic_compare_exchange_n(&d, &d, 2, 1, __ATOMIC_RELAXED, __ATOMIC_RELAXED);
return 0;
}
And looked at which symbols were unresolved. For the __atomic_*()
ones, we tested with and without -latomic to see which variants are
built-in, which variants require libatomic. This testing effort has
led to the following results:
__sync __atomic gcc
1 2 4 8 1 2 4 8
ARC Y Y Y - Y Y Y L 4.8 [with BR2_ARC_ATOMIC_EXT]
ARC - - - - L L L L 4.8 [without BR2_ARC_ATOMIC_EXT]
ARM Y Y Y X Y Y Y Y 4.8, 4.7
ARM Y Y Y - 4.5
AArch64 Y Y Y Y Y Y Y Y 4.9, 5.1
Bfin - - Y - 4.3
i386 (i386) - - - - L L L L 4.9
i386 (i486..) Y Y Y - L L L L 4.9 [i486, c3, winchip2, winchip-c6]
i386 (> i586) Y Y Y Y L L L L 4.9
Microblaze - - Y - L L Y L 4.9
MIPS Y Y Y - Y Y Y L 4.9
MIPS64 Y Y Y Y Y Y Y Y 4.9
NIOS 2 Y Y Y - Y Y Y L 4.9, 5.2
PowerPC Y Y Y - Y Y Y L 4.9
SuperH Y Y Y - Y Y Y L 4.9
SPARC - - - - L L L L 4.9
SPARC64 Y Y Y Y Y Y Y Y 4.9
x86_64 Y Y Y Y Y Y Y Y 4.7, 4.9
Xtensa Y Y Y - Y Y Y Y 4.9
Notes:
* __atomic built-ins appeared in gcc 4.7, so for toolchais older than
that, the __atomic column is empty.
* Y means 'supported built-in'
* L means 'supported via linking to libatomic' (only for __atomic
functions)
* X indicates a very special case for 8 bytes __sync built-ins on
ARM. On ARMv7, there is no problem, starting from gcc 4.7, the
__sync built-in for 8 bytes integers is implemented, fully in
userspace. For cores < ARMv7, doing a 8 bytes atomic operation
requires help from the kernel. Unfortunately, the libgcc code
implementing this uses the __write() function to display an error,
and this function is internal to glibc. Therefore, if you're using
glibc everything is fine, but if you're using uClibc or musl, you
cannot link an application that uses 8 bytes __sync
operations. This has been fixed as part of gcc PR68095, merged in
the gcc 5 branch but not yet part of any gcc release.
* - means not supported
This commit only introduces the new options. Follow-up commits will
progressively change the packages using BR2_ARCH_HAS_ATOMICS to use
the appropriate BR2_TOOLCHAIN_HAS_SYNC_x or BR2_TOOLCHAIN_HAS_ATOMIC
until the point where BR2_ARCH_HAS_ATOMICS can be removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we have a pattern-matching that automatically derives the
the source tarball filename from the binary tarball filename.
However, the latest Linaro toolchains no longer follow that scheme (and
do not even readily provide the sources...).
Remove the generic pattern-matching, and explicitly set the source
tarball name for those toolchains that do have a source tarball readily
available.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
LIBSPATH is populated based on a find with a pattern that can look like:
libfoo*.so
and thus the output of the find will contain all file paths that match this
pattern.
Unfortunately, the name LIBSPATH suggests that only one entry is returned,
rather than possibly multiple.
As this code is quite complex, use the more accurate name LIBPATHS iso
LIBSPATH.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: only add the symlink with the old 2014.09 Linaro toolchain,
for the newer ones, it is no longer needed.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Runtime tested with Qemu 2.3.1 using a configuration based on
qemu_arm_vexpress_defconfig with BR2_ARM_ENABLE_VFP and
BR2_ARM_EABIHF selected
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: only add the symlink with the old 2014.09 Linaro toolchain,
for the newer ones, it is no longer needed. This has been runtime
tested in Qemu.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Runtime tested with Qemu 2.3.1 using qemu_aarch64_virt_defconfig.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: only add the symlink with the old 2014.09 Linaro toolchain,
for the newer ones, it is no longer needed. This has been runtime
tested in Qemu.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, following symbolic links are created in both target and
staging directories:
- lib(32|64) --> lib
- usr/lib(32|64) --> lib
The decision for lib32 or lib64 is based on the target architecture
configuration in buildroot (BR2_ARCH_IS_64).
In at least one case this is not correct: when building for a Cavium Octeon
III processor using the toolchain from the Cavium Networks SDK, and
specifying -march=octeon3 in BR2_TARGET_OPTIMIZATION, libraries are expected
in directory 'lib32-fp' rather than 'lib32' (ABI=n32; likewise for
lib64-fp in case of ABI=n64)
More generally the correct symbolic link is from (usr/)${ARCH_LIB_DIR}->lib.
However, feedback from Arnout Vandecappelle is that there are packages that
do depend on the lib32/lib64 symlink, even if ARCH_LIB_DIR is different.
Hence, these links must be kept.
Fix the problem as follows:
- For internal toolchains: no change
- For external toolchains: create a symlink ARCH_LIB_DIR->lib if
(usr/)ARCH_LIB_DIR does not exist yet.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: "Yann E. Morin" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The copy_toolchain_sysroot helper in toolchain/helpers.mk performs an
rsync of various directories from the extracted external toolchain to the
corresponding directory in staging.
The relevant (simplified) snippet is:
for i in etc $${ARCH_LIB_DIR} sbin usr usr/$${ARCH_LIB_DIR}; do \
rsync -au --chmod=u=rwX,go=rX --exclude 'usr/lib/locale' \
--exclude '/lib/' --exclude '/lib32/' \
--exclude '/lib64/' \
$${ARCH_SYSROOT_DIR}/$$i/ $(STAGING_DIR)/$$i/ ; \
done ; \
The exclusion logic of lib/lib32/lib64 has originally been added by commit
5628776c4a with the purpose of only copying
the relevant usr/lib* directory from the toolchain to staging, instead of
all. For example, if ARCH_LIB_DIR is 'lib64', then only usr/lib64 would be
copied and usr/lib and usr/lib32 are ignored. It works by ignoring any
lib/lib32/lib64 subdirectory on the rsync of 'usr' and then separately
copying usr/{lib,lib32,lib64} as appropriate. (The exclusion rules only have
impact on the files beneath the main source directory.)
However, ARCH_LIB_DIR can take other values than (lib, lib32, lib64), for
example lib32-fp or lib64-fp (Octeon III toolchain with -march=octeon3). In
the existing code, the rsync for 'usr' would then already copy these lib
directories, and the next rsync for 'usr/$${ARCH_LIB_DIR}' does nothing.
By itself, this is not a very big problem: the staging directory simply has
some extra directories. However, a subsequent patch will create a staging
symlink from $${ARCH_LIB_DIR} to lib. The first rsync would then overwrite
that symlink with the real directory usr/$${ARCH_LIB_DIR} from the
toolchain, which is not correct.
Assuming the patch that creates the symlink ARCH_LIB_DIR->lib is applied,
the original situation after 'make clean toolchain' with an
ARCH_LIB_DIR=lib32-fp is:
$ ls -ld output/staging/{,usr/}lib* output/target/{usr/,}lib*
drwxr-xr-x 2 4096 May 26 2015 output/staging/lib
lrwxrwxrwx 1 3 Jan 20 13:47 output/staging/lib32 -> lib
lrwxrwxrwx 1 3 Jan 20 13:47 output/staging/lib32-fp -> lib
drwxr-xr-x 2 4096 Jan 20 13:47 output/staging/usr/lib
lrwxrwxrwx 1 3 Jan 20 13:47 output/staging/usr/lib32 -> lib
drwxr-xr-x 4 4096 May 26 2015 output/staging/usr/lib32-fp
drwxr-xr-x 4 4096 May 26 2015 output/staging/usr/lib64-fp
drwxr-xr-x 4 4096 May 26 2015 output/staging/usr/libexec
drwxr-xr-x 3 4096 May 26 2015 output/staging/usr/libexec32
drwxr-xr-x 3 4096 May 26 2015 output/staging/usr/libexec32-fp
drwxr-xr-x 3 4096 May 26 2015 output/staging/usr/libexec64-fp
drwxr-xr-x 2 4096 Jan 20 13:48 output/target/lib
lrwxrwxrwx 1 3 Jan 20 13:47 output/target/lib32 -> lib
lrwxrwxrwx 1 3 Jan 20 13:47 output/target/lib32-fp -> lib
drwxr-xr-x 2 4096 Jan 20 13:48 output/target/usr/lib
lrwxrwxrwx 1 3 Jan 20 13:47 output/target/usr/lib32 -> lib
lrwxrwxrwx 1 3 Jan 20 13:47 output/target/usr/lib32-fp -> lib
Notice how usr/lib32-fp is not a symlink but a directory, and the presence
of an unnecessary directory usr/lib64-fp.
This patch improves the rsync exclusion rules by excluding any lib*
directory on the first rsync. As this would also exclude any
libexec/libexec32/... directory, explicitly include them first (first match
takes precedence). This (as is already the case today) results in more
usr/libexec* directories than needed, but it is not touched by this patch.
With the fix applied, the situation becomes:
drwxr-xr-x 2 4096 May 26 2015 output/staging/lib
lrwxrwxrwx 1 3 Jan 20 14:27 output/staging/lib32 -> lib
lrwxrwxrwx 1 3 Jan 20 14:27 output/staging/lib32-fp -> lib
drwxr-xr-x 4 4096 May 26 2015 output/staging/usr/lib
lrwxrwxrwx 1 3 Jan 20 14:27 output/staging/usr/lib32 -> lib
lrwxrwxrwx 1 3 Jan 20 14:27 output/staging/usr/lib32-fp -> lib
drwxr-xr-x 4 4096 May 26 2015 output/staging/usr/libexec
drwxr-xr-x 3 4096 May 26 2015 output/staging/usr/libexec32
drwxr-xr-x 3 4096 May 26 2015 output/staging/usr/libexec32-fp
drwxr-xr-x 3 4096 May 26 2015 output/staging/usr/libexec64-fp
drwxr-xr-x 2 4096 Jan 20 14:27 output/target/lib
lrwxrwxrwx 1 3 Jan 20 14:27 output/target/lib32 -> lib
lrwxrwxrwx 1 3 Jan 20 14:27 output/target/lib32-fp -> lib
drwxr-xr-x 2 4096 Jan 20 14:27 output/target/usr/lib
lrwxrwxrwx 1 3 Jan 20 14:27 output/target/usr/lib32 -> lib
lrwxrwxrwx 1 3 Jan 20 14:27 output/target/usr/lib32-fp -> lib
For cases where ARCH_LIB_DIR is one of lib, lib32 or lib64 this fix
makes no difference, and likewise for internal toolchains.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The copy_toolchain_sysroot helper in toolchain/helpers.mk performs an
rsync of various directories from the extracted external toolchain to the
corresponding directory in staging.
The relevant (simplified) snippet is:
for i in etc $${ARCH_LIB_DIR} sbin usr usr/$${ARCH_LIB_DIR}; do \
rsync -au --chmod=u=rwX,go=rX --exclude 'usr/lib/locale' \
--exclude lib --exclude lib32 --exclude lib64 \
$${ARCH_SYSROOT_DIR}/$$i/ $(STAGING_DIR)/$$i/ ; \
done ; \
The exclusion logic of lib/lib32/lib64 has been added by commit
5628776c4a with the purpose of only copying
the relevant usr/lib* directory from the toolchain to staging, instead of
all. For example, if ARCH_LIB_DIR is 'lib64', then only usr/lib64 would be
copied and usr/lib and usr/lib32 are ignored. It works by ignoring any
lib/lib32/lib64 subdirectory on the rsync of 'usr' and then separately
copying usr/{lib,lib32,lib64} as appropriate. (The exclusion rules only have
impact on the files beneath the main source directory.)
However, on the rsync of 'usr', ANY of the following directories AND files
would be excluded:
lib/
lib
lib32/
foobar/something/lib/
something-else/lib64/
while it is only the intention to skip directories directly under usr.
Therefore, add a leading (to restrict the scope to first-level) and trailing
(to restrict to directories) slash to the exclude pattern. From 'man rsync':
- if the pattern starts with a / then it is anchored to [..] the root of
the transfer.
- if the pattern ends with a / then it will only match a directory, not
a regular file, symlink, or device.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Quite some time ago, we added the options
BR2_TOOLCHAIN_HAS_GCC_BUG_58595 and BR2_TOOLCHAIN_HAS_GCC_BUG_58854 to
indicate if the toolchain was affected by those gcc bugs, which were
causing build failure with a number of packages.
With the recent change in the external toolchain logic to provide only
the latest version of each toolchain "family", all the toolchains
which were affected by those issues disappeared from Buildroot. Those
options are no longer being selected anywhere, and being blind
options, it means their value is always going to be "disabled".
Conquently, this commit removes those options completely, and updates
all the packages where they were used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas:
- rebase on top of master
- remove version number of the Config.in option name.]
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- rebase on top of master
- remove version number of the Config.in option name.]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently our toolchain infrastructure assumes that every toolchain has
nested sysroot directories. However that's not true for all of them. The
Codescape toolchains from Imagination Technologies use a side by side
sysroot structure, for instance.
This patch allows our toolchain infrastructure to detect what kind of
sysroot structure we have (nested or side by side) and performs the
appropriate actions.
[Thomas: update the comment above the function, to explain what's
going on with nested sysroots and side-by-side sysroots.]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported by Yann E. MORIN [1], the latest CS PowerPC toolchain (2012.03)
requires a PPC CPU with SPE, which is basically two variants, 8540 (e500v1) and
8548 (e500v2) in Buildroot. All other PPC CPU can't use that toolchain.
Keep CS PowerPC 2011.03 as latest available version and add a second Kconfig
symbol for the CS PowerPC 2012.03 since it's verry specific to one CPU type
(e500v2).
Previously it was possible to select the CS 2012.03 with a powerpc 8540 (e500v1)
CPU but the sysroot provided by the toolchain only support the 8548 (e500v2)
variant. Allow to select CS 2012.03 only with BR2_powerpc_8548.
Also re-add the previous CS toolchain handling for pixman and liquid-dsp.
[1] http://lists.busybox.net/pipermail/buildroot/2015-December/148308.html
Reported-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Following the introduction of the check that target packages must have
their Config.in option enabled, we started to see failures related to
netbsd-queue. Yann fixed the internal toolchain case in commit
e84fd04e88. This commit fixes the
similar issue, but for the external toolchain case.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we check that a target package in the _DEPENDENCIES of another
package has to be enabled in config, all target packages must have a
kconfig symbol.
Add a Kconfig symbol for linux-headers, and select it from the packages
that depends on it (C libraries).
Also remove the now-misleading comments "for legal-info" from the C
libraries.
Fixes:
http://autobuild.buildroot.org/results/2a9/2a9e5d27b34357819b44f573a834da1ba5079030/
... and numerous similar failures ...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Arago armv7 toolchain really requires a VFPv3 unit, so only expose
it to the user when the CPU actually has such a VFP unit
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since a few releases, the pre-built musl external toolchain has added
an ARM EABIhf variant, built for ARMv5T. This commit allows this
additional external toolchain to be used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Just rename Kconfig symbols
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Rename the Kconfig symbol even if this toolchain is marked as broken.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Remove old ADI toolchain handling in glog, openpgm and zeromq.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Remove old CS toolchain handling in pixman and liquid-dsp.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some package black list CS NIOSII toolchains, mainly due to _gp link
issue. A follow up patch can remove the restriction case by case.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See the conclusion about external toolchains during the Buildroot
meeting [1]:
"In the future, we stick to a single external toolchain version. The
Kconfig symbol should not encode the version (avoid legacy handling)"
[1] http://elinux.org/index.php?title=Buildroot:DeveloperDaysELCE2015#Report
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Musl does not provide a 'sys/queue.h' implementation, and this has been
a problem for packages that depend on it.
So lets create a package called netbsd-queue that will install a
'sys/queue.h' in the staging directory when enabled, based on the
NetBSD implementation.
Musl toolchain and external toolchain packages will depend on this
package, so that 'sys/queue.h' will be always installed when compiling
with a musl based toolchain.
Tested on ARM and x86 in the following cases:
- Buildroot musl toolchain.
- External musl toolchain without 'sys/queue.h'.
- External musl toolchain with 'sys/queue.h'.
Fixes:
http://autobuild.buildroot.net/results/24bad2d06ab40024dacf136bee722072d587f84e
And possibly many others.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the latest Linaro toolchain, the gdbserver has moved (surprise!)
and is now located side-by-side with the toolchain executables.
This commit adds this path as a new location where to search for a
gdbserver, and while at it wraps the line that has become too long in
the process.
[Thomas: rework commit log according to Yann's suggestion.]
Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 23ffa7ec first extracts to the toolchain-external build
directory and then moves everything to $(HOST_DIR)/opt/ext-toolchain.
However, this is not idempotent, because moving directories over
existing ones doesn't always work, particularly if the target is on
another device.
Simply remove the destination contents before moving.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The backfin toolchains come in two archives.
We extract the first (main) archive using the generic extract commands,
while the second is extracted as a post-extract hook.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that packages can provide a list of files to be excluded when
extracting their archive, downloaded external toolchains are no longer
special in this respect.
Still, those toolchains are currently extracted directly into their
final location, $(HOST_DIR)/opt/ext-toolchain/ which means we still
need a custom extract command.
Except, we don't really need it: we can just move the toolchain, after
it's been extracted by the generic extract command, with a post-extract
hook.
This means that:
- we now extract the toolchain with the generic extract command,
- the toolchain is thus extracted into $(@D) ,
- fixup commands are run against $(@D), as a post-extract hook,
instead of against $(HOST_DIR)/opt/ext-toolchain ,
- once this is done, we move $(@D)/* into the final location with a
new post-extract hook.
Note: the blackfin case is special, and will be handled in a follow-up
patch.
[Thomas: register the TOOLCHAIN_EXTERNAL_FIXUP_CMDS only for the Arago
case, add some additional comments in the code about why we're moving
the toolchain around.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, for the blackfin external toolchains, we tell tar to
extract files with the --hard-dereference. However, --hard-dereference
is only meaningful when creating an archive, not when extracting
it. Therefore, let's drop this option.
[Thomas: rework commit title and commit log, after some suggestions
from Arnout.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
That toolchain is built for an x86_64 host, so we make it available only
for x86_64, and we keep the old 2014.09 toolchain for x86 hosts.
To avoid dealing with legacy symbols and introduce versioned options,
we reuse the same symbol for both toolchains. Thanks to the different
depednencies (on the host), we can give them different prompts and
different help texts.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
That toolchain is built for an x86_64 host, so we make it available only
for x86_64, and we keep the old 2014.09 toolchain for x86 hosts.
To avoid dealing with legacy symbols and introduce versioned options,
we reuse the same symbol for both toolchains. Thanks to the different
depednencies (on the host), we can give them different prompts and
different help texts.
[Thomas: tweak Config.in help text to actually match this toolchain
instead of being a wrong copy/paste from the old Linaro toolchain for
ARMeb.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
That toolchain is built for an x86_64 host, so we make it available only
for x86_64, and we keep the old 2014.09 toolchain for x86 hosts.
To avoid dealing with legacy symbols and introduce versioned options,
we reuse the same symbol for both toolchains. Thanks to the different
depednencies (on the host), we can give them different prompts and
different help texts.
[Thomas: s/eglibc/glibc/ as noticed by Baruch.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In Makefile, the comma ',' is used to separate the arguments passed to
functions, so we should not be allowed to use straight commas in strings
we want to expand.
For the toolchain wrapper, we need to transform a list:
-mfoo -mbar -mbuz
into something acceptable for a C array assignment:
"-mfoo", "-mbar", "-mbuz",
So, we use a $(foreach ...) loop for that. However, we do have a
straight comma in there.
It does not cause any issue in practice, since $(foreach) is a make
builtin function that accepts three and only three parameters.
However, this is not sane.
Change the straight comma to the usual $(comma) expansion, like we would
do for a call to any other function.
At the same time, make the code a bit easier to read, by first creating
the transformed list, and then creating the define.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Intel X1000 is the Pentium class microprocessor that ships with
Galileo Gen 1/2. This patch adds changes to arch and toolchain-wrapper
to omit the lock prefix for the X1000.
[Thomas: tweak commit log and Config.in help text.]
Signed-off-by: Ray Kinsella <ray.kinsella@intel.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make sure BR2_TOOLCHAIN_USES_MUSL selects BR2_TOOLCHAIN_HAS_SSP since
musl always provides SSP support (like glibc).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently the CodeSourcery toolchains for MIPS can be selected to build
mips32 (revision level 1) targets, but the resulting binaries are built
for mips32r2 instead. This is because these toolchains don't have
library support other than mips32r2, so there is no point to allow the
selection of a mips32 variant with a CodeSourcery MIPS toolchain, since
everything will be built for mips32r2 instead.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The buildroot internal toolchain now adds a wrapper. When we use a
buildroot toolchain as an external toolchain, we want to bypass this
wrapper and call the compiler directly, for two reasons:
1. The options added by the wrapper are not necessarily appropriate
when it is reused as an external toolchain. For instance, ccache
may have been enabled while building the toolchain but not when
using it as an external toolchain.
2. Currently, the wrapper expects to reside in .../usr/bin, but when
used as an external toolchain it will be in .../ext-toolchain/bin.
Therefore, the wrapper can't find the real binary and sysroot
anymore.
To bypass the wrapper, we check for the existence of *.br_real files in
the external toolchain directory. If any such file exists, the wrapper
will add the .br_real suffix for all the wrapped files. Note that the
wrapper doesn't check if the *.br_real exists for each individual
wrapped file, it just assumes that all wrapped files have a
corresponding .br_real. This is currently true but that may change in
the future of course.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Filter out all other uClibc versions, as they containing
serious bugs for mips64.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Add support for mips32r6 and mips64r6 target architecture variants
- Disable unsupported gcc versions
- Disable unsupported binutils versions
- Disable unsupported external toolchains
- Disable unsuported C libraries
- Add a hook in order to make glibc compile for MIPS R6.
[Thomas: slightly tweak the glibc hack explanation, to make it
hopefully clearer.]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes#8386
We should check if BR_CROSS_PATH_ABS is defined, not if it evalutates to
true for the pre processor.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Those two comments:
- are exactly the same
- have the same dependencies (except for arm/armeb)
So, make it a common comment. It will be useful to have that comment
when we introduce new Linaro toolchain versions.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When building in a different output directory than the original build,
there will currently be a lot of ccache misses because in many cases
there is some -I/... absolute path in the compilation. Ccache has an
option CCACHE_BASEDIR to substitute absolute paths with relative paths,
so they wil be the same in the hash (and in the output).
Since there are some disadvantages to this path rewriting, it is made
optional as BR2_CCACHE_USE_BASEDIR. It defaults to y because the
usefulness of ccache is severely reduced without this option.
In addition to CCACHE_BASEDIR, we also substitute away the occurences
of $(HOST_DIR) in the calculation of the compiler hash. This is done
regardless of the setting of BR2_CCACHE_USE_BASEDIR because it's
quite harmless.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Our current ccache disables hashing of the compiler executable itself,
because using the default 'mtime' doesn't work in buildroot: we always
rebuild the compiler, so the mtime is always different, so the cache
always misses.
However, in the current situation, if a user changes the compiler
configuration (which would result in the compiler generating different
object files than before) and does 'make clean all', ccache may in fact
reuse object files from the previous run. This rarely gives problems,
because
(1) the cache expires quite quickly (it's only 1GB by default),
(2) radically changing compiler options will cause cache misses because
different header files are used,
(3) many compiler changes (e.g. changing -mtune) have little practical
effect because the resulting code is usually still compatible,
(4) we currently don't use CCACHE_BASEDIR, and almost all object files
will contain an absolute path (e.g. in debug info), so when
building in a different directory, most of it will miss,
(5) we do mostly build test, and many of the potential problems only
appear at runtime.
Still, when ccache _does_ use the wrong cached object files, the
effects are really weird and hard to debug. Also, we want reproducible
builds and obviously the above makes builds non-reproducible. So we
have a FAQ entry that warns against using ccache and tells the user to
clear the cache in case of problems.
Now that ccache is called from the toolchain wrapper, it is in fact
possible to at least use the 'mtime' compiler hash for the external
toolchain and for the host-gcc. Indeed, in this case, the compiler
executable comes from a tarball so the mtime will be a good reference
for its state. Therefore, the patch (sed script) that changes the
default from 'mtime' to 'none' is removed.
For the internal toolchain, we can do better by providing a hash of
the relevant toolchain options. We are only interested in things that
affect the compiler itself, because ccache also processes the header
files and it doesn't look at libraries because it doesn't cache the
link step, just compilation. Everything that affects the compiler
itself can nicely be summarised in $(HOST_GCC_FINAL_CONF_OPTS). Of
course, also the compiler source itself is relevant, so the source
tarball and all the patches are included in the hash. For this purpose,
a new HOST_GCC_XTENSA_OVERLAY_TAR is introduced.
The following procedure tests the ccache behaviour:
Use this defconfig:
BR2_arm=y
BR2_CCACHE=y
make
readelf -A output/build/uclibc-1.0.6/libc/signal/signal.os
-> Tag_CPU_name: "ARM926EJ-S"
Now make menuconfig, change variant into BR2_cortex_a9
make clean; make
readelf -A output/build/uclibc-1.0.6/libc/signal/signal.os
-> Tag_CPU_name: "ARM926EJ-S"
should be "Cortex-A9"
After this commit, it is "Cortex-A9".
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Danomi Manchego <danomimanchego123@gmail.com>
Cc: Károly Kasza <kaszak@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By moving the ccache call to the toolchain wrapper, the following
scenario no longer works:
make foo-dirclean all BR2_CCACHE=
That's a sometimes useful call to check if some failure is perhaps
caused by ccache.
We can enable this scenario again by exporting BR_NO_CCACHE when
BR2_CCACHE is not set, and by handling this in the toolchain wrapper.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since we always have a toolchain wrapper now, we can move the ccache
call to the toolchain wrapper.
The hostcc ccache handling obviously stays.
The global addition of ccache to TARGET_CC/CXX is removed, but many
individual packages and infras still add it. This means we have a
chain like this: ccache -> toolchain-wrapper -> ccache -> gcc
However, this is fairly harmless: for cache misses, the inner ccache
just adds overhead and for cache hits, the inner ccache is never
called. Later patches will remove these redundant ccache calls.
As a side effect, perl now supports ccache as well.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Danomi Manchego <danomimanchego123@gmail.com>
Cc: Károly Kasza <kaszak@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We have a toolchain wrapper for external toolchain, but it is also
beneficial for internal toolchains, for the following reasons:
1. It can make sure that BR2_TARGET_OPTIMIZATION is passed to the
compiler even if a package's build system doesn't honor CFLAGS.
2. It allows us to do the unsafe path check (i.e. -I/usr/include)
without patching gcc.
3. It makes it simpler to implement building each package with a
separate staging directory (per-package staging).
4. It makes it simpler to implement a compiler hash check for ccache.
The wrapper is reused from the external toolchain. A third CROSS_PATH_
option is added to the wrapper: in this case, the real executable is in
the same directory, with the extension .real.
The creation of the simple symlinks is merged with the creation of the
wrapper symlinks, otherwise part of the -gcc-ar handling logic would
have to be repeated.
The complex case-condition could be refactored with the one for the
external toolchain, but then it becomes even more complex because
they each have special corner cases. For example, the internal
toolchain has to handle *.real to avoid creating an extra indirection
after host-gcc-{final,initial}-rebuild.
Instead of creating the .real files, it would also have been possible
to install the internal toolchain in $(HOST_DIR)/opt, similar to what
we do for the external toolchain. However, then we would also have to
copy things to the sysroot and do more of the magic that the external
toolchain is doing. So keeping it in $(HOST_DIR)/usr/bin is much
simpler.
Note that gcc-initial has to be wrapped as well, because it is used for
building libc and we want to apply the same magic when building libc.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Jérôme Oufella <jerome.oufella@savoirfairelinux.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The toolchain wrapper will be reused for the internal toolchain, so it
belongs in the toolchain directory. Also, the ext- prefix is removed
from it. The build commands are moved to a new toolchain-wrapper.mk.
The wrapper arguments that are also relevant for the internal toolchain
wrapper are moved to toolchain-wrapper.mk, the rest stays in
toolchain-external.mk.
While we're at it, move the building of the toolchain wrapper to the
build step of toolchain-external. There is no specific reason to do
this, other than that it fits better semantically. Also remove the
MESSAGE call, otherwise we'd see:
>>> toolchain-external undefined Building
>>> toolchain-external undefined Building toolchain wrapper
/usr/bin/gcc ...
Having an extra "Building toolchain wrapper' message is pointless.
The useless condition on $(BR2_TARGET_OPTIMIZATION) is removed. It was
always true because it wasn't qstrip'ped first, so clearly it works
without that condition as well.
Also rewrapped some comments and removed the 'external' reference.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Jérôme Oufella <jerome.oufella@savoirfairelinux.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For some external toolchain vendors the actual source code URL can be simply
derived from the binary file URL.
Here we obtain TOOLCHAIN_EXTERNAL_ACTUAL_SOURCE_TARBALL for all Mentor and
Linaro toolchains with a few $(subst) calls.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Trailing slashes are going to be declared illegal from FOO_SITE
variables.
But Buildroot internally generates such a variable when using a custom
external toolchain (i.e. BR2_TOOLCHAIN_EXTERNAL_CUSTOM). This is
because TOOLCHAIN_EXTERNAL_SITE is set to
$(dir $(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_URL))), and $(dir)
leaves a trailing slash.
Fix it using patsubst, just like linux and the bootloaders do.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Introduced by previous patch 0f75b2635e,
this printf would break the build of glibc, because there is no format
to printf:
printf: usage: printf [-v var] format [arguments]
Signed-off-by Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reported-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
'echo -n' is not a POSIX construct (no flag support), we shoud use
'printf', especially in init script.
This patch was generated by the following command line:
git grep -l 'echo -n' -- `git ls-files | grep -v 'patch'` | xargs sed -i 's/echo -n/printf/'
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When ARCH is arm and the hard-floating-point option is on executables
expect to find the dynamic linker at /lib/ld-musl-armhf.so.1 and not
/lib/ld-musl-arm.so.1.
This patch adjusts the logic that creates the symbolic link from the
dynamic linker path to the musl C library (since musl has everything
built into a single file).
[Thomas: tweak the commit log.]
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
