This patch adds a new package for building newlib for a bare-metal toolchain.
The cpu architecture is defined by a toolchain-bare-metal virtual package.
While any cpu architecture could be used, the default configuration will be a
Xilinx microblaze little endian architecture, so that buildroot will be able
to build the microblaze firmware applications for zynqmp and versal.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds a new package for building gcc for a bare-metal toolchain.
The cpu architecture is defined by a toolchain-bare-metal virtual package.
While any cpu architecture could be used, the default configuration will be a
Xilinx microblaze little endian architecture, so that buildroot will be able
to build the microblaze firmware applications for zynqmp and versal.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds a new package for building binutils for a bare-metal toolchain.
The cpu architecture is defined by a toolchain-bare-metal virtual package.
While any cpu architecture could be used, the default configuration will be a
Xilinx microblaze little endian architecture, so that buildroot will be able
to build the microblaze firmware applications for zynqmp and versal.
In order to build the zynqmp pmufw and versal plm applications without error,
binutils version 2.41 or higher is required.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds a new virtual package for adding a bare-metal
toolchain to Buildroot. For now, it depends on nothing, so it will not
actually build anything, but it defines some options that will be
needed by the various packages that will be part of this toolchain
build process.
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@amd.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The buildroot manual says this kind of commit should be done together
with the actual changes made to a config/board. But since a number of
changes will follow for some boards and configs, it seemed more
logical to make a separate commit for this.
Signed-off-by: Marleen Vos <marleen.vos@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a runtime test for fastapi. Use uvicorn as the asgi server
application as does the fastapi hello world example [1].
Fastapi depends on PydanticV2 now which is written in rust so we need to
run the test on armv7.
[1] https://fastapi.tiangolo.com/tutorial/first-steps/
Signed-off-by: Marcus Hoffmann <bubu@bubu1.eu>
[Arnout:
- fix flake8 errors
support/testing/tests/package/sample_python_fastapi.py:5:1: E302 expected 2 blank lines, found 1
support/testing/tests/package/sample_python_fastapi.py:8:1: W391 blank line at end of file
- Remove BR2_CCACHE (as requested by Marcus).
- Add a comment explaining that this also tests uvicorn and pydantic.
- Re-try wget in a loop instead of a fixed timeout of 30 seconds.
- Add a DEVELOPERS entry.
]
Signed-off-by: Arnout Vandecappelle <arnout@mind.be>
JSON Web Tokens are an open, industry standard RFC 7519
method for representing claims securely between two parties.
This Library is used by Asterisk 20.6.0 and newer.
We need to use autotools to install pkgconfig file.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Peter: drop _SOURCE, add host-pkgconf, add to DEVELOPERS]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Until now, micropython-lib was a package that installed v1.9.3, which is
more than 6 years old. This was acceptable since micropython never made
any other official release of the library until v1.20.
Meanwhile, the libraries underwent a reorganization, and they are now
available in a directory structure that cannot be copied directly into
the target. This might explain why v1.9.3 is still present in the
current day buildroot (which comes with micropython v1.22).
As part of the changes made by the micropython project, the libraries
are now released together with the interpreter. They are cloned as a
submodule into the lib/micropython-lib directory, and are present in the
release tarball.
This commit introduces an auxiliary script to collect those libraries
and reorder them into a structure that can then be copied into
/usr/lib/micropython. The script utilizes a module from the tools
directory of the micropython repo.
The helper script is kept as simple as possible, and makes use of
existing micropython tools (used to process manifests) to discover the
list of packages available in micropython-lib. The hope is that by
relying on them, any future changes in directory structure will be
covered by the official "manifestfile.py" tool.
It is to be noted that, even though the manifestfile.py script/module is
part of the micropython package, it is actually written for CPython, and
is not expected to even work when using micropython as an interpreter.
This we do not need to introduce host-micropython to use that tool, and
microython already depends on host-python3 for other parts of the build.
With this commit, micropython-lib is installed (optionally) as part
of micropython, and thus a separate package is no longer needed. The
original config variable name was retained as it fits with the
micropython package "namespace", and thus this is backward compatible
and no legacy handling is needed.
This commit also ensures that the libraries in micropython-lib will
be updated together with newer versions of micropython in the future.
Signed-off-by: Abilio Marques <abiliojr@gmail.com>
[yann.morin.1998@free.fr:
- use if-block in Config.in
- simplify PYTHONPATH
- fix check-package
- reword and reorder parts of the commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested on a Raspberry PI4 with a SNOM 360 and a SIP Trunk to Easybell.
Attention: chan_sip is deprecated, use chan_pjsip instead.
For chan_pjsip you need to enable openssl otherwise the module will not
load.
Patches 0005 and 0006 are applied upstream.
Remove unused configure options:
--without-curses
--without-isdnnet
--without-misdn
--without-nbs
--without-oss
--without-sqlite
--without-suppserv
--without-termcap
--without-tinfo
--without-vpb
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Much like flutter-pi, this package is a Flutter embedder used to run Flutter
applications. However, unlike Flutter-pi, this package requires a Wayland
compositor to run, which flutter-pi does not support. Furthermore, flutter-pi
lacks several plugins and features that ivi-homescreen supports, such as:
- Dart VM console redirection
- DLT logging
- Accessibility
- Compositor region
- Compositor surface
- Desktop Window
- Go Router
- Isolate
- Keyboard Manager
- Layer Playground
- Mouse Cursor
- PackageInfo
- Platform
- Platform Views
- Restoration
The following plugins and options are hardcoded to off:
- Crash handler: Requires a newer version of sentry-native.
- File selector: Requires the zenity package.
- Firebase-core: Requires the firebase-cpp-sdk package.
- URL Launcher: Requires a runtime-dependency on xdg-open.
- BUILD_TEXTURE_NAVI_RENDER_EGL: Failes to build.
- BUILD_TEXTURE_TEST_EGL: Fails to build.
- ENABLE_AGL_CLIENT: Used for Automitve Grade Linux (AGL).
The ENABLE_XDG_CLIENT=ON option is a requirement to run Flutter apps.
If this option is disabled, ivi-homescreen segfaults when starting an
application.
Finally, there is a need for a patch that fixes the audio-players plugin:
If the audio-players plugin is the only plugin selected, several compilation
errors occure because of undeclared definitions, as the standard_method_codec.h
header file is missing.
Upstream-status: https://github.com/toyota-connected/ivi-homescreen/pull/133
This package has been tested on a x86_64 host with an AMD Ryzen 9 6900HS
with Docker 24.0.5:
- The following distributions:
- Fedora 39: Host system
- Ubuntu 22.04: Docker
- Debian 11: Docker
- The following targets:
- BR2_aarch64
- BR2_arm
- BR2_x86_64
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr:
- propagate BR2_PACKAGE_HOST_FLUTTER_SDK_BIN_ARCH_SUPPORTS to comments
- drop NPTL, implied by glibc
- reorder dependencies in a more logical way
- reorder comments
- drop undefined BR2_PACKAGE_IVI_HOMESCREEN_HAS_CLIENT
- grammar ("for to change")
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The RealTime Linux Analysis tool includes a set of commands that relies
on the osnoise and timerlat tracers from the ftrace kernel subsystem,
allowing to analyze the lantency sources coming from the hardware and
the kernel itself.
This tool was introduced in v5.17 but until v5.19 it relied on libprocps
that has been deprecated soon. So let's make it available for v5.19+.
Rtla relies on libtracefs and libtraceevent, although libtraceevent itself
is already a dependency for libtracefs.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
[Giulio: fix install on recent Linux versions]
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[Andreas: deal with Linux Fixups, musl, SSP]
Signed-off-by: Andreas Ziegler <br015@umbiko.net>
[yann.morin.1998@free.fr: reword and extend help text]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Introduce the libtracefs library, that is used to be bundled with the
trace-cmd tool. This library is now used by several tools and libraries
such as trace-cmd and rtla, and is used as an interface to the ftrace
kernel subsystem through tracefs.
To build with meson, this package requires to disable documentation
generation, and since this is not possible add a local patch pending
upstream that adds -Ddoc=false support to libtracefs.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
[Giulio:
- bump version to 1.7.0 and add hash file
- move to meson build system
]
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Introduce the libtraceevent library, that is used to be bundled with the
trace-cmd tool. This library is now used by several tools and libraries
such as trace-cmd, libtracefs and rtla.
To build with meson, this package requires to disable documentation
generation, and since this is not possible add a local patch pending
upstream that adds -Ddoc=false support to libtraceevent.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
[Giulio:
- bump version to 1.7.3 and add hash file
- move to meson build system
]
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr:
- bump to 1.8.1, drop patch applied upstream
- add "homepage" to help text
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
I will only be supporting Flutter and other packages needed by Amarula Solution
in a professional related capacity from now on.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
I will only be supporting Buildroot in a professional capacity from now on.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ml_dtypes is a stand-alone implementation of several NumPy
dtype extensions used in machine learning libraries.
https://github.com/jax-ml/ml_dtypes
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is the default terminal sway uses.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr: add comment only for first-order deps]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The traditional dmenu is only running under X; dmenu-wayland is an
implementation that runs only on (some) wayland compositors; Sway
uses it by default as its menu bar.
Signed-off-by: Adam Duskett <adam.duskett@amarulasolutions.com>
[yann.morin.1998@free.fr:
- _SYNC_4 is an arch dependency, so comment should be hidden
- add a few missing comments for first-level dependencies
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This defconfig enables edk2 UEFI shell and grub2 riscv64-efi boot
of a Linux Kernel.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Upstream changed the package name and its github repo:
44df6e08cc
Signed-off-by: Bernd Kuhls <bernd@kuhls.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This runtime test verifies the existence of the tftpy module when
selected.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Substitute spaces with tab on 2 entries for consistency.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for Xilinx Kria KD240 starter kit.
KD240 features can be found here:
https://www.xilinx.com/products/som/kria/kd240-drives-starter-kit.html
While the Kria SOM is based on a ZynqMP SoC, there are some key
boot config differences from the other ZynqMP evaluation boards.
1. There are no boot switches on Kria SOMs. The boot mode is thus
hard configured for QSPI flash. A pre-programmed boot.bin comes
with every Starter Kit. U-Boot can then find the Linux kernel and
file system on the SD card.
Optional instructions for updating the boot.bin in the QSPI flash
can be found in the readme.txt file and the link below.
https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1641152513/Kria+K26+SOM
2. Kria SOMs use UART1 for the console instead of UART0. For this
reason, Kria Starter Kits will use a separate extlinux.conf file
from other ZynqMP evaluation boards.
3. The KD240 has a USB to SD card bridge, so the Linux kernel
and file system are found on /dev/sda1 and /dev/sda2.
4. The following patches have been submitted upstream to u-boot.
Without these patches, the usb, sd card and ethernet peripherals
do not work correctly.
https://patchwork.ozlabs.org/project/uboot/patch/20231213134007.2818069-1-neal.frager@amd.com/https://patchwork.ozlabs.org/project/uboot/patch/20231213134052.2818879-1-neal.frager@amd.com/
Signed-off-by: Neal Frager <neal.frager@amd.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
[Peter: add upstream tag, drop patch numbering from patches]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for ZynqMP ZCU104 evaluation board.
ZCU104 features can be found here:
https://www.xilinx.com/products/boards-and-kits/zcu104.html
Signed-off-by: Neal Frager <neal.frager@amd.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
