This package adds the rtl8189fs WiFi driver. The driver is sourced
from jwrdegoede's and icenowy's work on GitHub:
repo: https://github.com/jwrdegoede/rtl8189ES_linux.git
branch: rtl8189fs
Driver is known to support Realtek RTL8189FTV chip.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This board is a variant of orangepi-pc board. It adds 8GB eMMC and Realtek
RTL8189FTV SDIO WiFi chip. This variant has a separate support in U-Boot
and kernel. So it makes sense to create a separate entry
for this board in buildroot.
Board support package includes the following components:
- mainline u-boot 2017.09
- mainline kernel 4.13.11
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Thomas: add entry to DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- 0001-Makefile-remove-Werror-to-avoid-build-failures.patch is
adjusted to apply to the new version of kvm-unit-tests
- 0001-x86-hyperv_clock-be-explicit-about-mul-instruction-d.patch is
removed, as it has been merged upstream as of commit
45276b5860522921c77fb3ccc1458ff5f223c3c6.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This merges the next branch accumulated during the 2017.11 release
cycle back into the master branch.
A few conflicts had to be resolved:
- In the DEVELOPERS file, because Fabrice Fontaine was added as a
developer for libupnp in master, and for libupnp18 in
next. Resolution is simple: add him for both.
- linux/Config.in, because we updated the 4.13.x release used by
default in master, while we moved to 4.14 in next. Resolution: use
4.14.
- package/libupnp/libupnp.hash: a hash for the license file was added
in master, while the package was bumped into next. Resolution: keep
the hash for the license file, and keep the hash for the newest
version of libupnp.
- package/linux-headers/Config.in.host: default version of the kernel
headers for 4.13 was bumped to the latest 4.13.x in master, but was
changed to 4.14 in next. Resolution: use 4.14.
- package/samba4/: samba was bumped to 4.6.11 in master for security
reasons, but was bumped to 4.7.3 in next. Resolution: keep 4.7.3.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
OSTree is an upgrade system for Linux-based operating systems
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
[Thomas: use SPDX license code, fix license, it's GPL-2.0+ not GPL-2.0.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 940bfe2f43 with the
following changes:
- new hashes for 5.6.3 and 5.9.1 (there is no 5.9.2).
- BR2_PACKAGE_QT5BASE_LICENSE_APPROVED has been removed
- add GPL-3 to licences
- uses SPDX identifier for licences
- add missing dependencies (qt5base, qt5webkit, qt5declarative)
- removes /usr when qmake host-tools is invoked at configure
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
[Thomas: add entry in the DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Sample quest and testing quest are not included in SOLARUS_LICENSE
since it's notinstalled by default.
Remove Werror when building with debugging symbols.
Add libpng runtime dependency since solarus games require png image
support.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Julien BOIBESSOT <julien.boibessot@armadeus.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Rygel is a home media solution (UPnP AV MediaServer) that allows you to
easily share audio, video and pictures to other devices.
Additionally, media player software may use Rygel to become a
MediaRenderer that may be controlled remotely by a UPnP or DLNA
Controller.
Rygel achieves interoperability with other devices in the market by
trying to conform to the very strict requirements of DLNA and by
converting media on-the-fly to formats that client devices can handle.
Most Rygel functionality is implemented through a plug-in mechanism.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas:
- use SPDX license codes
- add hashes for license files
- move Config.in comment at the end of the Config.in file to not
break the indentation of the sub-options.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Diffconfig is a simple utility for comparing two configuration files.
See usage in the script for more info.
Borrowed from the Linux kernel source code and adapted to Buildroot.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since kernel drivers for Realtek wireless chips use non-standard
interfaces, upstream hostapd does not support them. One have to apply
an external patch for hostapd to work with these chips. See:
https://github.com/pritambaral/hostapd-rtl871xdrv
A configuration option is added to enable support for Realtek chips,
and it's turned off by default.
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
Tested-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The addition of a new defconfig in commit
459e3320dc ("configs/imx6sx-sdb: Add new
defconfig") introduced changes in the DEVELOPERS file and
.gitlab-ci.yml file that were not matching the defconfig name. This
commit fixes those issues.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Needed for python-mwclient version bump to 0.8.6.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Needed for python-mwclient version bump to 0.8.6.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building waylandpp for the target requires a wayland-scanner++ binary
built for the host.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: use 'depends on BR2_PACKAGE_WAYLAND' instead of a select.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Branch 1.8.x of libupnp is not compatible with branch 1.6.x so add a
dedicated package and make it depends on !BR2_PACKAGE_LIBUPNP as
suggested by Thomas Petazzoni and Arnout Vandecappelle during review
of "libupnp: add 1.8.3 version" patch.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: fix the dependencies of the Config.in comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for imx6ulevk_defconfig that allows booting a mainline
kernel and mainline U-Boot.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changes since v2:
- remove newlines from Config.in
- add LICENSE hash
Changes since v1:
- reword commit to match upstream style
- fold the DEVELOPERS modifications into the same commit
- add Config selections for required python core modules
- bump version to 6.3.0
Tested in a clean chroot, events are generated for exceptions, and
reported to the server configured for the client.
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for imx6sx-sdb_defconfig that allows booting a mainline
kernel and mainline U-Boot.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for imx6slevk_defconfig that allows booting a mainline
kernel and mainline U-Boot.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-----BEGIN PGP SIGNATURE-----
iHAEABECADAWIQSrB9gG0s50H7iG7lCwJbqLWcNjGQUCWgoOuBIcamFjbWV0QHVj
bGliYy5vcmcACgkQsCW6i1nDYxk3BACgoEfYuoacjRfkauSnpqK2hoUwJ0EAn211
meekIKU8LLE+mRzozp90x+sT
=mJ5n
-----END PGP SIGNATURE-----
Merge tag '2017.11-rc2' into next
master has gained a number of autobuilder bugfixes since rc1, so merge these
to next to also fix them there.
Make WiFi work out of the box on orange-pi-zero:
- add xr819 firmware to image
- add mdev for module autoloading
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package enables access to firmware blobs from Armbian firmware
repository: https://github.com/armbian/firmware
That repository contains multiple firmware blobs grouped by vendor.
For the sake of convenience each group can be independently selected
using Kconfig options. This commit enables the following options:
- firmware blobs for XR819 SDIO WiFi chip
- firmware blobs for AP6212 WiFi/BT combo
Armbian firmware repository does not include any specific licenses.
Most part of those firmware blobs belongs to various Android/Linux
SDK packages provided by board vendors. As a result, this package
makes use of the following conservative approach for all the
selected firmware binaries:
FIRMWARE_LICENSE = PROPRIETARY
FIRMWARE_REDISTRIBUTE = NO
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: add license hash, fix Config.in, correct license as pointed out by
Yegor]
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The rfkill program has been incorporated to the util-linux package.
The new implementation is based upon, and backward compatible with, the
original rfkill from Johannes Berg and Marcel Holtmann.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Open-source software for volunteer computing and grid computing.
Use the idle time on your computer to cure diseases, study global
warming, discover pulsars, and do many other types of scientific
research.
https://boinc.berkeley.edu
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Bernd:
- bumped to version 7.8.3
- removed patches which where applied upstream
- added myself to DEVELOPERS as well]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
I've been using this packages to test changes in the grub package, so
I can maintain them.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for bananapi M1 board with below features:
- U-Boot 2017.09
- Linux 4.13.7
- Default packages from buildroot
Cc: Jason <manager@sinovoip.com.cn>
Cc: hailymei@banana-pi.com <hailymei@banana-pi.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The directory package/sepolgen/ was removed in commit 9d6da7a26
(policycoreutils: split packages and bump to 2.7), but two
entries were left in the DEVELOPERS file.
This causes the following warnings when running util/get-developers:
WARNING: 'package/sepolgen/' doesn't match any file
WARNING: 'package/sepolgen/' doesn't match any file
Remove the erroneous entries.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Policycoreutils was broken up into several packages, as such several
changes needed to happen for this patch to work:
- Remove patches 3, 4, and 5 as they no longer apply.
- Refresh patches 1 and 2 to work with version 2.7
- Remove semodule_${deps,expand,link,package} and sestatus from the makedirs
in the mk file.
- Remove restorecond from the make and config file. (Seperate package)
- Remove Audit2allow from the make and config file. (In a different package)
- Remove the package sepolgen
- Add the package selinux-python
- Add the package restorecond
- Add the package semodule-utils
- Add the relevant Config.in.legacy options into the menu.
Because these are utilities that work on top of python, the older versions of
these utilites still work, and as such this should be a single patch.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As stated by the upstream developers, Prosody only supports
lua-5.1 or luajit (which is a lua-5.1 interpreter):
> Response from zash at zash.se:
>
>> I pegged the package to lua 5,1 based on the contents of the
>> INSTALL file. Is this a hard requirement?
>
> Up until Prosody 0.9 Lua 5.1 is required. However LuaJIT
> implements Lua 5.1 so it works.
The license terms are not very consistent: the source files all
state to be "MIT/X11 licensed" and defer to the COPYING file for
details, but that file only has the text for the MIT license.
Thus, we believe the license to be MIT/X11, as stated in the source
files.
This installs the base system with certificates for two domains:
localhost and example.com
The default runtime configuration is tweaked during installation
to properly setup logging and pid-file directories.
Prosody doesn't like being executed as root, and thus the daemon
is executed as the user prosody. The startup script creates the
pid file write location with appropriate permissions.
Signed-off-by: Dushara Jayasinghe <nidujay@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package is based on the bcg729 library from Belledonne Communica-
tions which is wrapped into a freeswitch module to provide a native
G729.A codec.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Quoting http://www.linphone.org/technical-corner/bcg729/downloads
regarding patent information:
"ITU G729 Annex A/B were offically released October/November 1996
(https://www.itu.int/rec/T-REC-G.729), hence all patents covering these
specifications shall have expired in November 2016.
Patent pool administrator confirmed most licensed patents under the
G.729 Consortium have expired (http://www.sipro.com/G729.html)."
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After the conversion to SPL the imx6sabresd defconfig targets have
been renamed,so update the entry accordingly.
Suggested-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is similar to the ppc64_pseries config, except we build for little
endian instead of big endian.
The default architecture is set to Power8 as this was the first fully
enabled LE machine.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch is based on works [1] and [2].
With this patch, one can run the Qt5 WebEngine quicknanobrowser sample
with the following options.
BR2_TOOLCHAIN_BUILDROOT_LIBC="glibc" and
BR2_TOOLCHAIN_BUILDROOT_CXX (Qt 5 needs a toolchain w/ wchar, NPTL, C++,
dynamic library; for now it builds only with glibc)
BR2_PACKAGE_LIBERATION (Qt needs at least one font)
BR2_PACKAGE_QT5BASE_EXAMPLES (to install quicknanobrowser sample)
BR2_PACKAGE_QT5BASE_GIF (do display gif)
BR2_PACKAGE_QT5BASE_JPEG (do display jpeg)
BR2_PACKAGE_QT5BASE_PNG (do display png)
BR2_PACKAGE_QT5QUICKCONTROLS (needed by webengine)
BR2_PACKAGE_QT5QUICKCONTROLS2 (needed by webengine)
BR2_PACKAGE_QT5WEBENGINE (because it is what we want)
Qt WebEngine requires an Open(E)GL-capable backend. As an example, the
package rpi-userland must be enabled to build for a rpi.
BR2_PACKAGE_RPI_USERLAND (to enable OpenGL ES backend)
To browse for HTTPS websites, please consider adding the following
options as well for SSL/TLS.
BR2_PACKAGE_CA_CERT (for certificates)
BR2_PACKAGE_NTPD (to sync date for certificates)
Since version 5.9, chromium requires udev at runtime (see note 4).
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV (input backend)
To run quicknanobrowser
# cd /usr/lib/qt/examples/webengine/quicknanobrowser/
# ./quicknanobrowser https://www.buildroot.org/
Note: The chromium.inc has been generated using the following command.
( echo 'CHROMIUM_LICENSE_FILES = \' &&
cd output/build/qt5webengine-5.9.1/ && \
find "src/3rdparty/chromium/" -type f -iname "*LICENSE*" -o -iname "*COPYING*" -o -iname "*GPL*" | \
sed -e '/\.asm$/d' \
-e '/\.h$/d' \
-e '/\.c$/d' \
-e '/\.cc$/d' \
-e '/\.cpp$/d' \
-e '/\.pyc\?$/d' \
-e '/\.pl$/d' \
-e '/\.sha1$/d' \
-e '/\.patch$/d' \
-e '/licensecheck/d' \
-e 's,^,\t,' \
-e 's,$, \\,' | \
sort && \
echo '' ) >package/qt5/qt5webengine/chromium.inc
Note 2: Since 5.9.1, the chromium's copy of opus fails with neon [3].
Qt WebEngine can uses buildroot ffmpeg copy which compiles fine (using
qmake flag WEBENGINE_CONFIG+=use_system_ffmpeg). It implies selecting
the following options.
BR2_PACKAGE_FFMPEG
BR2_PACKAGE_OPUS
BR2_PACKAGE_LIBVPX
BR2_PACKAGE_WEBP
BR2_PACKAGE_WEBP_DEMUX
In file included from ../../3rdparty/chromium/third_party/opus/src/silk/arm/NSQ_neon.c:31:0:
/home/gportay/src/buildroot/output-rpi3-qt5.9/host/lib/gcc/arm-buildroot-linux-gnueabihf/6.4.0/include/arm_neon.h:8997:1: error: inlining failed in call to always_inline ‘vld1q_s32’: target specific option mismatch
vld1q_s32 (const int32_t * __a)
^~~~~~~~~
../../3rdparty/chromium/third_party/opus/src/silk/arm/NSQ_neon.c:40:15: note: called from here
int32x4_t coef0 = vld1q_s32(coef32);
^~~~~
../../3rdparty/chromium/third_party/opus/src/silk/arm/NSQ_neon.c: At top level:
cc1: warning: unrecognized command line option ‘-Wno-#pragma-messages’
Note 3: Version 5.6.2 causes a build issue while building chromium. The
build against this version is disabled until the release 5.6.3 is out.
Note 4: Here is trace when udev does not run
# cd /usr/lib/qt/examples/webengine/quicknanobrowser
# ./quicknanobrowser
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
Unable to query physical screen size, defaulting to 100 dpi.
To override, set QT_QPA_EGLFS_PHYSICAL_WIDTH and QT_QPA_EGLFS_PHYSICAL_HEIGHT (in millimeters).
[0101/000248.161973:WARNING:resource_bundle_qt.cpp(114)] locale_file_path.empty() for locale
[0101/000248.384693:WARNING:resource_bundle_qt.cpp(114)] locale_file_path.empty() for locale
[202:223:0101/000248.484954:FATAL:udev_loader.cc(38)] Check failed: false.
#0 0x0000742b93de <unknown>
#1 0x0000742c3c38 <unknown>
#2 0x000073e1e1aa <unknown>
#3 0x000073e1d96e <unknown>
#4 0x000073e1defa <unknown>
#5 0x000074af6364 <unknown>
#6 0x000074302878 <unknown>
#7 0x0000742c8fee <unknown>
#8 0x0000742c9f44 <unknown>
#9 0x0000742ca21e <unknown>
#10 0x0000742cac4c <unknown>
#11 0x0000742c87b2 <unknown>
#12 0x0000742da4f6 <unknown>
#13 0x000073ed9d38 <unknown>
#14 0x000073eda03c <unknown>
#15 0x0000742e9aec <unknown>
#16 0x0000742e71dc <unknown>
Aborted
Note 5: On rpi and depending on what is insinde the .config, more GPU
memory should be allocated to run properly qt samples.
#0 0x0000742c63de <unknown>
#1 0x0000742d0c38 <unknown>
#2 0x0000749d7bde <unknown>
#3 0x0000749e3c70 <unknown>
#4 0x00007530227c <unknown>
#5 0x000075302480 <unknown>
#6 0x0000752fb1e4 <unknown>
#7 0x00007430f878 <unknown>
#8 0x0000742d5fee <unknown>
#9 0x0000742d6f44 <unknown>
#10 0x0000742d721e <unknown>
#11 0x0000742d7ad6 <unknown>
#12 0x0000742d57b2 <unknown>
#13 0x0000742e74f6 <unknown>
#14 0x0000742f6a74 <unknown>
#15 0x0000742f41dc <unknown>
Received signal 6
#0 0x0000742c63de <unknown>
#1 0x0000742c66a0 <unknown>
#2 0x0000725b5d10 <unknown>
[end of stack trace]
qml: Render process exited with code 256 (abnormal exit)
# mount /dev/mmcblk0p1 /mnt
# sed '/^gpu_mem_/s,=.*,=200,' -i /mnt/config.txt
# umount /mnt
Note 6: The first patch fixes a build issue when samples are compiled
without the support of printing [4]. This patch is already merged in
branch 5.9 [5] and concerns only 5.9.1.
085c2c52 Always compile QWebEnginePage::print
It fixes the error below.
.obj/browsermainwindow.o: In function `BrowserMainWindow::printRequested(QWebEnginePage*)': browsermainwindow.cpp:(.text+0x2cc0): undefined reference to `QWebEnginePage::print(QPrinter*, QWebEngineCallback<bool> const&)'
The second patch loads both libEGL and libGLESv2 symbols implicitly
instead of loading them with explicitly using hard-coded locations. It
fixes a bug when providers of lib*GL does not create libraries named
libEGL.so.1 and libGLESv2.s2 [6]. This patch is already merged in branch
5.9 [7].
d4c621f6 Load libEGL and libGLES2 symbols implicitly
It fixes the error below.
[327:347:1221/085837:ERROR:surface_factory_qt.cpp(68)] Failed to load /usr/lib/libGLESv2.so.2: /usr/lib/libGLESv2.so.2: cannot open shared object file: No such file or directory
[1]: http://lists.busybox.net/pipermail/buildroot/2015-July/132010.html
[2]: https://patchwork.ozlabs.org/patch/640633/
[3]: https://patchwork.ozlabs.org/patch/791332/
[4]: https://bugreports.qt.io/browse/QTBUG-61510
[5]: https://codereview.qt-project.org/#/c/198041/
[6]: https://bugreports.qt.io/browse/QTBUG-57761
[7]: https://codereview.qt-project.org/#/c/199554/
Cc: Akihiko Odaki <akihiko.odaki.4i@stu.hosei.ac.jp>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
[Arnout:
- move more dependencies to _ARCH_DEPENDS;
- mention all toolchain dependencies in the comments]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Peter: board is from Sinovoip, not Lemaker, move board files,
Use kernel headers from kernel, explicitly use 4.13.3,
drop eth0 dhcp config, cleanup post-build args,
disable tar output format, use u-boot custom format,
add host-dosfstools/mtools for genimage, drop unused
host-uboot-tools/genext2fs]
Signed-off-by: Mike Harmony <mike.harmony@snapav.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
I'm going to leave current company and
this mail address is going to become invalid.
Signed-off-by: Naoki Matsumoto <n-matsumoto@melcoinc.co.jp>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As the SixXS project has ceased its operation on 2017-06-06,
the aiccu utility has been removed.
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Brock Williams <brock@cottonwoodcomputer.com>
[Thomas:
- properly handle the NLS cases, by adding two patches
- use sha256 locally calculated hash for the tarball, add hash for
the license file
- fix the license information: it's GPL-2.0 licensed, and the license
file is doc/COPYING.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot currently packages version 1.18 of simics, which is quite
out of date, and does not compile with Linux 4.12+. The latest package
v1.22 supports recent kernels, however that is not publicly available
anymore like the older versions.
In fact Simics is now moving away from the simicsfs kernel module, as
the kernel module has required too much maintenance work. Users should
move to the new user mode Simics agent instead. Therefore, we drop the
corresponding package from Buildroot.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The azmq library provides Boost Asio style bindings for ZeroMQ. This
library is built on top of ZeroMQ's standard C interface and is intended
to work well with C++ applications which use the Boost libraries in
general, and Asio in particular.
Signed-off-by: RJ Ascani <rj.ascani@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Introduce imx6q-sabresd_qt5_defconfig that supports the opensource
Etnaviv graphical stack.
This defconfig provides a way to quickly test some graphical applications,
such as kmscube, qt5, glmark2.
Currently kernel mainline exhibits issues when running cpufreq as ondemand
governor on mx6, so add a linux fragment that disables such option for the
time being.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
[Arnout:
- Add Fabio to DEVELOPERS
- Rename linux config fragment to linux_qt5.fragment
- Add comment to linux_qt5.fragment why it is needed
- Add explicit CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y to it
- Reorder defconfig entries to they match imx6q-sabresd_defconfig
- Remove strace and host-uboot-tools, neither seems to be needed
- Drop BR2_PACKAGE_QT5BASE_LICENSE_APPROVED, it no longer exists
- Replace BR2_TARGET_ROOTFS_EXT2_BLOCKS with BR2_TARGET_ROOTFS_EXT2_SIZE
- Regenerate .gitlab-ci.yml]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This host-only package was used to enable graphite support in GCC 4.9,
but Buildroot no longer supports Graphite optimizations in GCC 4.9
(only GCC >= 5.x is supported). Therefore, we can remove the cloog
package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
[Thomas: minor tweaks in Config.in file, adjust .mk file for
static+shared build.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While at it, also move my professional entry near my personal one.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add package to provide Zstandard compression tools
(see https://facebook.github.io/zstd)
Minimal config snippet for utils/test-pkg is as follows:
BR2_PACKAGE_ZSTD=y
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
[Thomas:
- use "config" instead of "menuconfig" in Config.in
- add missing final newline in Config.in
- pass DESTDIR=$(TARGET_DIR) only at install time
- wrap too long lines in the .mk file
- remove useless empty newline at end of .hash file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for nanopi-m1-plus board
with below features
- U-Boot 2017.07-rc3
nanopi-m1-plus dts support is present in rc3 version
- Linux 4.11.5
- linux patches to add nanopi-m1-plus dts
- Default packages from buildroot
Signed-off-by: Chakra Divi <chakra@openedev.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
PaX regression test suite
Signed-off-by: David Graziano <david.graziano@rockwellcollins.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add package for official python bindings availibe as a part of systemd
project at: https://github.com/systemd/python-systemd
Minimal config snippet for utils/test-pkg is as follows (sans
backslashes):
BR2_INIT_SYSTEMD=y
BR2_PACKAGE_PYTHON3=y
BR2_PACKAGE_PYTHON_SYSTEMD=y
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
I'm leaving the company. So removing the entry before the address bounces.
Signed-off-by: Benoît Allard <benoit.allard@greenbone.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The email address of Sagaert Johan is bouncing. Remove his DEVELOPERS entry.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
And add myself to the DEVELOPPERS for squashfs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Libressl is a fork of openssl from OpenSSL in 2014. Its goal is to
modernize the OpenSSL codebase, improve security, and apply best
practice development processes.
Right now, libressl is API compatible with OpenSSL 1.0.1, but does not
yet include all new APIs from OpenSSL 1.0.2 and later.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for nanopi-m1 board
with below features
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by: Chakra Divi <chakra@openedev.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we use mkfs to generate ext2/3/4 filesystem image by calling
mkfs directly from fs/ext2/ext2.mk, we can remove this package.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a package for pixz (pronounced pixie), a parallel, indexing version of
xz.
See https://github.com/vasi/pixz
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The utils provided by this package were formerly packaged with libva.
Libva contained a patch not to compile mpeg2vldemo to reduce
dependencies by avoiding C++, this patch is not moved to this package.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Peter: Mention that openssl is a runtime dependency,
Add license info as noted by Romain, add gpl-2.0.txt,
Add comment explaining the missing build step,
Use install -t for x509-types files]
Signed-off-by: Julien Viard de Galbert <julien@vdg.name>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds the Qt virtualkeyboard package.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
[Thomas:
- use SDPX license codes
- add entry to DEVELOPERS file
- drop BR2_PACKAGE_QT5BASE_LICENSE_APPROVED logic, since we removed this option
- select BR2_PACKAGE_QT5DECLARATIVE and
BR2_PACKAGE_QT5DECLARATIVE_QUICK instead of using a "depends on"
and propagate the appropriate dependencies]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Despite newer versions being available, this patch creates a package
for version 2017-05-05, because newer version have issues that need to
be addressed.
Still, the projects install target installs the wrong files, so custom
commands are needed for staging_install and target_install.
Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There were still references to support/scripts/ for scripts that have
moved to the utils directory. There were also references that were
updated, but not re-updated when the tools moves to utils.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move it to the top-level tools/ directory, so that it is easier to
find for users.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Chakra Divi <chakra@openedev.com>
[Thomas: remove host-uboot-tools from defconfig, already pulled by
BR2_TARGET_UBOOT_BOOT_SCRIPT, remove trailing whitespace.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
RAUC is the Robust Auto-Update Controller developed by the folks at
Pengutronix. It supports updating embedded systems from the network
(ex: HawkBit) or from a disk and provides a d-bus interface.
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for Engicam Is.IoT MX6UL SOM board
with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas: add host-dosfstools/host-mtools.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for Engicam GEAM6UL SOM board
with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas: add host-dosfstools and host-mtools.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for Engicam i.CoreM6 Quad/Dual/DualLite/Solo RQS
board with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas: add missing host-dosfstools and host-mtools.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for Engicam i.CoreM6 DualLite/Solo board
with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
U-Boot 2017.07-rc1 has common u-boot defconfig for All i.CoreM6
variant boards, so this patch update the same along with
buildroot defconfig that reflect the common name.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add two upstreamable patches for this package to fix uClibc
and musl builds.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for a13_olinuxino board
with below features
- U-Boot 2017.05
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by: Chakra Divi <chakra@openedev.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas:
- use full name in DEVELOPERS file
- remove parametrization of the post-build.sh script, just hardcode
the boot.cmd file used as input
- add missing dosfstools and mtools host packages in defconfig,
needed because a vfat partition is defined in the genimage.cfg
file
- minor tweaks to readme.txt file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds xradio wireless driver for SDIO WiFi chip XR819.
The out-of-tree driver is sourced from fifteenhex's work
on github https://github.com/fifteenhex/xradio
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Thomas: add entry in DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
[Thomas: "depends on" before "select" in Config.in]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package provides a kernel module and utilities in order to use
v4l2loopback virtual devices. This module allows you to create
"virtual video devices" normal (v4l2) applications will read these
devices as if they were ordinary video devices, but the video will not
be read from e.g. a capture card but instead it is generated by
another application.
Signed-off-by: Alexandre Esse <alexandre.esse.dev@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Linuxconsoletools contains the inputattach utility
to attach legacy serial devices to the Linux kernel
input layer and joystick utilities to calibrate and
test joysticks and joypads.
The buildroot package adds options to build only certain
tools.
website: http://sf.net/projects/linuxconsole/
Signed-off-by: Koen Martens <gmc@sonologic.nl>
[Thomas: minor tweaks to Config.in and .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kvazaar is an open-source HEVC encoder licensed under LGPLv2.1.
This provides tools to encode raw video into HEVC stream.
website: http://ultravideo.cs.tut.fi/
Signed-off-by: Alexandre Esse <alexandre.esse.dev@gmail.com>
[Thomas: add --without-cryptopp to explicitly disable support for this
optional dependency, use SPDX license code, fix Config.in]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add 'python-backports-shutil-get-terminal-size'[1] package to
buildroot. Needed by IPython when building against Python2.
[1] https://pypi.python.org/pypi/backports.shutil_get_terminal_size
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add 'pathlib2'[1] package to Buildroot. Needed by 'pickleshare'
package, which is added in the next patch.
[1] https://pypi.python.org/pypi/pathlib2
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for Engicam i.CoreM6 Quad/Dual board
with below features:
- U-Boot 2017.05
- Linux 4.11
- Default packages from buildroot
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add the Linux PTP Project package.
http://linuxptp.sourceforge.net/
The SysV and systemd init scripts start the daemon in slave-only mode on eth0
and synchronize the system clock to PTP.
Signed-off-by: Petr Kulhavy <brain@jikos.cz>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add 'ipython_genutils'[1] package to Buildroot. Needed by 'traitlets'.
[1] https://pypi.python.org/pypi/ipython_genutils
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: take into account comments made by Yegor:
- fix alphabetic ordering in the DEVELOPERS file
- fix comment in hash file
- add license file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The patch is for adding selinux reference policy (refpolicy).
It is a complete SELinux policy that can be used as the system policy
for a variety of systems and used as the basis for creating other policies.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Acked-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas:
- add entry to DEVELOPERS file
- remove redundant dependencies
- drop unused REFPOLICY_PYINC option
- use SPDX tag for license
- minor formatting fixes.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
OAuth2 library for Erlang
https://github.com/processone/p1_oauth2
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
firejail has been marked as broken since 3ad100fdcb
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Chris Frederick <chrisf@cdf123.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ola does not build with current protobuf. Upstream bug report is still open.
https://github.com/OpenLightingProject/ola/issues/1192
Cc: Dave Skok <blanco.ether@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
His e-mail address is bouncing:
<andrew.ruder@elecsyscorp.com>: host mx1-us1.ppe-hosted.com[67.231.154.162]
said: 550 5.7.1 <andrew.ruder@elecsyscorp.com>: Recipient address rejected:
User email address is marked as invalid. (in reply to RCPT TO command)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
He can re-add with a new email if he wants, but his
current Rockwell email will bounce.
Signed-off-by: Matt Weber <matt@thewebers.ws>
Acked-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A C++ library of designs, containing flexible implementations of
common design patterns and idioms.
Sigend-off-by: Corentin GUILLEVIC <corentin.guillevic@smile.fr>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: simplify target installation.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds Matt Weber as a developer for the libqmi, nginx-upload,
cgroupfs-mount, validjson and SELinux-related packages.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add 'decorator'[1] package to Buildroot. Needed by 'traitlets'
package, which is added in the next patch.
[1] https://pypi.python.org/pypi/decorator
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
[Thomas: download from PyPi, add hash file, add entry in DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libcsv is a small, simple and fast CSV library written in pure
ANSI C89 that can read and write CSV data.
Signed-off-by: David Graziano <david.graziano@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The e-mail address of Patrick Ziegler no longer exists:
patrick.ziegler@fh-kl.de - 550 5.1.1 User unknown
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The DEVELOPERS email address of Waldemar Rymarkiewicz is bouncing. Remove his
entry.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for atest application, which is useful for testing
alsa kernel drivers and detecting if playback/capture work correct
without artifacts, such as channel swap.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
[Thomas: add missing Config.in comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for libgphoto2 core library designed to allow access to
digital camera.
Signed-off-by: Kevin JOLY <kevin.joly@sensefly.com>
Cc: Romain Naour <romain.naour@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- Use downloads.sourceforge.net
- Remove final dot at end of <pkg>_LICENSE variable
- Minor tweaks in comments.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The host package will be needed by tvheadend.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas:
- group the host commands together and the target commands together
- use --prefix=$(HOST_DIR)/usr for host configuration, and do not
override PREFIX= at host install time
- use DESTDIR=$(TARGET_DIR) instead of overriding PREFIX= at target
install time.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Create the infra to check the style of new packages before submitting.
The overall function of the script is described inside a txt file.
It is designed to process the actual files and NOT the patch files
generated by git format-patch.
Also add the first check function, to warn if a file (Config.*, *.mk,
*.hash, *.patch) has no newline at the last line of the file, see [1].
Basic usage for simple packages:
support/scripts/check-package -vvv package/newpackage/*
Basic usage for packages with subdirs:
support/scripts/check-package -vvv $(find package/newpackage/ -type f)
See "checkpackage" in [2].
[1] http://patchwork.ozlabs.org/patch/631129/
[2] http://elinux.org/Buildroot#Todo_list
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
I'm no longer with Imagination Technologies. Update email address to an
active one.
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
I'm no longer with BayLibre. Change my address to an active one.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
C library for the MaxMind DB file format
The libmaxminddb library provides a C library for reading
MaxMind DB files, including the GeoIP2 databases from MaxMind.
This is a custom binary format designed to facilitate fast
lookups of IP addresses while allowing for great flexibility
in the type of data associated with an address.
The MaxMind DB format is an open format. The spec is available
at http://maxmind.github.io/MaxMind-DB/. This spec is licensed
under the Creative Commons Attribution-ShareAlike 3.0 Unported
License.
http://maxmind.github.io/libmaxminddb
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: add entry in DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Julien Viard de Galbert <julien@vdg.name>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- remove complicated DIEHARDER_POST_PATCH_FIXUP that replaces bogus
libtool .m4 files: since we are anyway autoreconfiguring the
package, this is not necessary. And therefore, remove host-libtool
in the dependencies.
- use GPL-2.0 instead of GPLv2
- add entry in DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Library tasked with managing, extracting and handling media art caches
https://github.com/GNOME/libmediaart
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: add entry to DEVELOPERS file, fix license file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We actually prefer the version 7.2.641 (over 7.2.646) as the
content of the release is identical and the 641 has the advantage
of providing a proper .tar.xz file.
Signed-off-by: Benoît Allard <benoit.allard@greenbone.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The project moved from SourceForge to GitHub.
The buildsystem changed from autotools to CMake.
Removed patches:
- 0001-includes.patch
Not needed anymore, was fixed upstream.
- 0002-remove-werror.patch
Autotools patch, no longer applicable.
- 0003-Fix-build-with-gcc-6.patch
This patch was applied upstream:
3d963bfbe7
Add patch to disable building of tests and allow building without gtest.
Signed-off-by: Pieterjan Camerlynck <pieterjan.camerlynck@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Backport a patch from SuperTux project:
61d3b63abc
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Augeas is a configuration editing tool. It parses configuration files in
their native formats and transforms them into a tree. Configuration
changes are made by manipulating this tree and saving it back into
native config files.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Romain Naour <romain.naour@gmail.com>
[Thomas: fix Config.in comment dependency.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas:
- switch to version 9.21 now that it has been released
- add a hash file
- switch to Git formatted patches
- use $(HOSTCC) instead of hardcoding "gcc", and use $(HOST_CFLAGS) and
$(HOST_LDFLAGS) instead of hardcoding -L$(HOST_DIR)/usr/lib
-I$(HOST_DIR)/usr/include
- add entry to DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gx6605s is a nice SOC for dvbs2 DVB product, and C-SKY inside.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
[Thomas: drop post-image script copying the gdbinit file, and suggest
to use gdb -x option instead to point to the gdbinit file in board/.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
[Thomas:
- remove jpeg, tiff and libpng dependencies, they do not seem to be
used
- add host-pkgconf as a dependency, since the configure script uses
PKG_CHECK_MODULES()
- pass --disable-opencl to explicitly disable OpenCL support
- add comment to explain why we don't add support for cairo, pango and
icu as optional dependencies.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package provides a userspace library that allows easy use of crypto
interfaces exposed by the kernel.
A git tip is used instead of the last official release, as autotools
support and cross-compilation fixes have been added only very recently.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Reviewed-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
[Thomas:
- Change sub-option prompt to "build test applications"
- Be more specific about the license: the library is under BSD-3c only,
while the programs are under BSD-3c or GPLv2.
- Explicitly disable programs when BR2_PACKAGE_LIBKCAPI_APPS is not
enabled.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 1.2.x branch is no longer maintained, so remove it since it's
likely security-vulnerable.
mbedtls is the modern replacement which was renamed from polarssl when
ARM bought them up.
However major releases broke API so polarssl 1.2.x isn't always
interchangeable with polarssl/mbedtls 1.3.x (interim mixed naming
because of new ownership) or newer 2.x series.
Fortunately we don't have any package in the tree that uses polarssl
exclusively.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- Remove entry in DEVELOPERS file for this package. Noticed by Arnout.
- Remove comment in bctoolbox.mk that no longer makes sense after
polarssl removal. Noticed by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the absence of full license text file, take a short source file that
mentions the license in its comment header.
[Peter: add DEVELOPERS entry]
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
[Thomas:
- Add entry to DEVELOPERS file for the new package
- Add dependency on !BR2_STATIC_LIBS, because the Makefile
unconditionally builds a shared library
- Use the "github" helper function to define <pkg>_SITE, get rid of
<pkg>_SOURCE.
- License is BSD-2c, not just BSD.
- Add <pkg>_LICENSE_FILES variable.
- Define LIBSCRYPT_DISABLE_STACK_PROTECTOR inside the
BR2_TOOLCHAIN_HAS_SSP condition, and move from a
LIBSCRYPT_POST_EXTRACT_HOOKS to a LIBSCRYPT_POST_PATCH_HOOKS.
- Pass $(TARGET_CONFIGURE_OPTS) instead of just passing CC.
- Pass $(TARGET_MAKE_ENV) when calling $(MAKE).]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gstreamer-vaapi consists in a collection of VA-API based plugins for
GStreamer and helper libraries. These libraries are used for hardware
decoding and encoding of several video formats.
decoding formats:
JPEG, MPEG-2, MPEG-4:2, H.264 AVC, H.264 MVC, VP8, VC-1, WMV3, and HEVC.
encoding formats:
MPEG-2, H.264 AVC, H.264 MVC, JPEG, VP8, HEVC
The package won't compile without at least one renderer enabled, so I
chose to enable DRM by default, as X11, GLX, and wayland are heavy
handed with the dependencies. As such, I have disabled every option
defaulting to yes except for DRM for the first patch.
Also, these codecs are only for x86 and require a Intel CPU (See Hardware
Requirements on line 82 of the README file.)
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
[Thomas:
- Add entry to DEVELOPERS file.
- Add BR2_TOOLCHAIN_HAS_THREADS dependency to the main Config.in
option.
- Add BR2_PACKAGE_HAS_UDEV dependency to the main Config.in option.
- Add comments about the BR2_STATIC_LIBS config option.
- Rewrap Config.in help text and removing trailing tabs/spaces.
- Remove restriction to i386/x86-64
- Add patch to fix build with uClibc.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
... and add myself to the DEVELOPERS for nbd.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new package provides s6-linux-init, a set of minimalistic tools to
create a s6-based init system, including a /sbin/init program, on a
machine running a Linux kernel.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new package provides s6-linux-utils, a set of minimalistic
Linux-specific system utilities.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new package provides s6-portable-utils, a set of tiny general Unix
utilities, often performing well-known tasks such as cut and grep, but
optimized for simplicity and small size.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new package provides s6-rc, a service manager for s6-based systems,
i.e. a suite of programs that can start and stop services, both
long-running daemons and one-time initialization scripts, in the proper
order according to a dependency tree.
The host variant is provided so s6-rc-compile is available and can
be used to build the services database offline, either in a package
Makefile or a post-build script.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new package provides s6-networking, a suite of small networking
utilities for Unix systems.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new package provides s6-dns, a suite of DNS client programs and
libraries for Unix systems, as an alternative to the BIND, djbdns or
other DNS clients.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new package provides s6, a small suite of programs for UNIX,
designed to allow process supervision (a.k.a service supervision), in
the line of daemontools and runit.
The host variant is provided as it is required to build the host
variant of s6-rc. Only the libraries and headers are installed.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Firejail Security Sandbox
https://firejail.wordpress.com/
Lightweight application sandboxing system using seccomp and kernel
namespaces.
Signed-off-by: Chris Frederick <cdf123@cdf123.net>
[Thomas:
- Fix DEVELOPERS entry: use <> around the e-mail address instead of ()
- firejail builds fine with musl, so only exclude uclibc, which fails
to build with EM_ARM undeclared
- Update to upstream version 0.9.44.8.
- Remove FIREJAIL_MAKE_OPTS, as suggested by Romain Naour.
- Pass --enable-busybox-workaround only if Busybox is enabled, as
suggested by Romain Naour.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The board support package includes the following components:
- U-Boot 2016.11
- Linux 4.9.3
- packages:
- alsa-utils for basic audio usage of the on-board headphone jack
and microphone
- iw and wpa_supplicant for managing the wireless interface
Two Linux patches are necessary to enable audio and wifi support. Both
patches are fetched from the Linux next branch and are probably mainlined in
Linux 4.11.
A Linux configuration fragment enables the wireless device driver, which
is not enabled by default in the mainline defconfig of the board.
The wifi chip needs a NVRAM configuration file which is provided in the
rootfs overlay.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas: remove e2fsprogs from the target packages, add entry in
DEVELOPERS file, remove C++ support.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for kmscube application, which is helpful for testing
kms/drm drivers.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
GTest version 1.8.0 includes gmock so merge both packages inside gtest
In this merge:
- Add gmock as a suboption of gtest (BR2_PACKAGE_GTEST_GMOCK)
following advice from Arnout Vandecappelle
- Add BR2_PACKAGE_GMOCK as a legacy entry, selecting BR2_PACKAGE_GTEST
and BR2_PACKAGE_GTEST_GMOCK.
- Use cmake to install libraries and headers and add missing files
(gtest.pc, gtest-config, gmock.pc) in
GTEST_POST_INSTALL_STAGING_HOOKS instead of redefining
GTEST_INSTALL_STAGING_CMDS
- Remove patch on Python as gmock/gtest now supports python 3.0
(commit 456fc2b5c4e9ebf05a5987dfe1ff0ac9ffeb53cc)
- Add the correct license in HOST_GTEST_LICENSE as all python code in
googlemock/scripts/generator is licensed under Apache-2.0 and not
BSD-3c
- Fix URL of gtest project in Config.in
- Remove the gmock entry from DEVELOPERS
- Install gmock_gen directly, instead of as a symlink to gmock_gen.py
Notice that any external package that depends on gmock will cause an
immediate build termination because make doesn't know how to build
gmock. Since the user has just removed gmock from the legacy menu, it
should be quite obvious what needs to be done.
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- Use += instead of = when assigning a value to <pkg>_DEPENDENCIES in
conditional
- Remove comment about the "tricky logic" around BUILD_GTEST and
BUILD_GMOCK
- Move GTEST_GMOCK_INSTALL_MISSING_FILE inside
the ($(BR2_PACKAGE_GTEST_GMOCK),y) condition.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adds the python binding for libftdi to buildroot.
Signed-off-by: Christian Kellermann <christian.kellermann@solectrix.de>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The cosmo package has been removed in commit
2c84388663, but the entry in the
DEVELOPERS file was forgotten.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit provides basic support for the C-SKY architecture.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
[Thomas: minor tweaks.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package is needed to make luaposix work.
The upstream name is just "bit32", but the luarocks infra doesn't
support an upstream name different from the Buildroot name. We therefore
have to explicitly set all variables and we need custom extract
commands.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- add entry to DEVELOPERS file
- remove useless "depends on BR2_PACKAGE_HAS_LUAINTERPRETER" in
Config.in file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package provides execline, a (non-interactive) scripting language,
like sh, used in the s6 supervision system.
The host variant is provided as it is required to build and run the host
variants of s6 and s6-rc.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
[Thomas: add entry to DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
memtool allows one to read and write memory mapped registers via /dev/mem.
The commands are inspired by the respective commands of the barebox
bootloader. This is handy during driver development to inspect and modify
register settings. It can also be used to modify regular files and
character devices (e.g. to paint to /dev/fb0).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: add entry to DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Lugaru needs SDL2 library with OpenGL support which require X11 support.
Otherwise Lugaru error out with "No dynamic GL support in video driver"
message.
https://osslugaru.gitlab.io/
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ilias Apalodimas <apalos@gmail.com>
[Thomas:
- rewrap Config.in help text
- add dependency on !BR2_STATIC_LIBS since the code uses libdl.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Julian only ever sent one patch to freerdp, the one adding it, in 2012.
I'm somewhat interested in this package, so I'll adopt it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gqrx is an open source software defined radio (SDR) receiver implemented
using GNU Radio and the Qt GUI toolkit. Currently it works on Linux
and Mac with hardware supported by gr-osmosdr, including Funcube Dongle,
RTL-SDR, Airspy, HackRF, BladeRF, RFSpace, USRP and SoapySDR.
Gqrx can operate as an AM/FM/SSB receiver with audio output or as an
FFT-only instrument. There are also various hooks for interacting
with external application using network sockets.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- remove unneeded dependency from Config.in, inherited from Qt5
- add entry to DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The originally added entries were based on 'last committer' heuristics, but
I do not particularly feel responsible for them.
Instead update the list with more appropriate entries.
Additionally, update my email address.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adam has contributed the python-mutagen and sngrep packages, so add
him as a developer for those two packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Developper for package/python-babel and package/python-flask-babel.
Signed-off-by: Lionel Flandrin <lionel@svkt.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
