I re-did the patches: one patch per change, patch configure.in instead
of the configure script itself, a few more issues fixed. This should
hopefully make the patches acceptable for upstream, or at least make it
easier to migrate them on version bumps.
This also fixes compilation with musl libc.
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Don't use hardening (SSP_CFLAGS & PIE_CFLAGS) flags on host tools since
the host compiler may differ wildly from the tests run on the cross
compiler and they might not work. Fixes:
http://autobuild.buildroot.net/results/b10/b1091bd04ab988744548b74fb48c64bf291fed2f/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We introduce the new "Audio" firmware category for the firmware.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix prompt at the same time.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
wl18xx are a familly of WLAN + BT chipsets.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
linux-firmware has gained a few firmware files for Broadcom WiFi
chipsets. Installing all of them takes a lot of place, when usually only
one is really needed.
Split the Broadcom BRCM drivers in two categories: bcm43xx and bcm43xxx,
when they were previously a single config option, so as to reclaim a bit
of space.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some updated firmwares files.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The copy_scripts() method in distutils copies the scripts listed
in the setup file and adjusts the first line to refer to the
current Python interpreter. When cross-compiling, this means that
the adjusted shebang refers to the host Python interpreter.
As a consequence, we add a patch for python and python3 that
force copy_scripts() to preserve the shebang when
cross-compilation is detected.
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
targetcli-fb is a command-line interface for configuring the LIO
generic SCSI target, present in 3.x Linux kernel versions.
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
configshell-fb is a Python library that provides a framework for
building simple but nice CLI-based applications.
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
rtslib-fb is an object-based Python library for configuring the
LIO generic SCSI target, present in 3.x Linux kernel versions.
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Urwid is a console user interface library for Python.
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Inspired by some text in the 'project-specific patches' section, this patch
adds a separate section on layering customizations by providing multiple
post-build scripts, multiple rootfs overlays, etc.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch reworks the section 'Step-by-step instructions for storing
configuration' as follows:
- rename into 'Quick guide to storing your project-specific customizations'
and hence make it serve as a summary to the chapter
- change the introduction to make this clear
- update paths to line-up with section 'recommended directory structure'
- recommend BR2_GLOBAL_PATCH_DIR, as is done in the section on adding
patches.
- mention how to add packages in a project-specific directory (to be
expanded in another patch)
- minor rewording
- rename file into customize-quick-guide.txt
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This small patch adds references to the section on 'recommended directory
structure' from sections explaining the post-build script and rootfs
overlay.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds a new section to chapter 'Project-specific customization' to
describe how to add project-specific packages from a project-specific
directory. The principle was already described in the presentation 'Using
Buildroot for real projects' but was never documented in official Buildroot
documentation.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Buildroot manual was recommending following paths for project-specific
packages:
package/<company>/<boardname>/foo/
$BR2_EXTERNAL/package/<boardname>/foo/
However, if a company has several boards, it is often the case that some
packages are common for different boards. Therefore, introducing a
<boardname> path component is not ideal.
This patch changes the recommendation to:
package/<company>/foo/
$BR2_EXTERNAL/package/foo/
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This small patch renames the section 'Customizing packages' to 'Adding
project-specific patches'. Additionally, a minor change is done to the
introduction of this section.
To better reflect the contents, the source file is renamed.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds basic documentation on users tables, a topic which was
currently not yet covered in the manual.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds basic documentation on device and permission tables, a topic
which was currently not yet covered in the manual.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch re-orders the enumeration of typical project customization
actions:
- move the 'patching packages' section downwards.
- group the entries on post-build scripts and rootfs-overlays to match the
actual section text.
Since indented enumerations use asterixes, update the top-level entries with
asterixes too for consistency.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch promotes the sections on Buildroot configuration and the
configuration of other components to top-level sections, to match the
overview in the introduction of the chapter. The introduction of the
original section is removed as it does not bring additional info anymore.
Some rewording is done as well.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch moves the section 'Basics for storing the configuration' to a
separate file and upwards in the manual section order, to line up with the
listing of customization actions in the introduction of the chapter. The
text itself is currently unchanged, this will be handled in the next patch.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Minor rework of the section 'Creating your own board support', as follows:
- Rename section into 'Adding support for a particular board'
- Modify introduction
- Refer to Project-specific customizations chapter
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Section 'Creating your own board support' is seemingly written in the
mindset of adding support for public boards. Therefore, it is more suited in
the Developer guide, rather than in the User guide.
Adding support for custom non-public boards falls under the
'Project-specific customizations' category and will be described in that
section.
This patch moves the unchanged text into a separate file, included from the
Developer guide. The next patch will make some minor changes to the text
itself.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the kernel patch from:
http://patchwork.ozlabs.org/patch/384285/
There is no problem with latest gcc anymore.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also add hashes, kill some whitespace and correct the license type
(ICS->ISC).
Enable $EDITOR to point to the right editor for visudo since it normally
expects /usr/bin/vi which in busybox-world is /bin/vi (and some people
might want to use other editors like the operating system sized one).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We should use positive logic (show things that are otherwise hidden...)
for the help since it's what it does.
It also applies to more options than just packages alone, for example
the AVR32 architecture so add an "options" label to it.
[Peter: tweak help text as suggested by Yann]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix :
BR2_PACKAGE_WHOIS selects BR2_PACKAGE_GETTEXT which has unmet direct dependencies (BR2_USE_WCHAR)
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add hash and switch to xz download for space savings.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The BR2_arm10t option is not correct as it references an ARM family,
while other options indicate a specific ARM core. The ARM cores in
ARM10 family are ARM1020E, ARM1022E and ARM1026EJ-S according to
Wikipedia. However, those are clearly very rare, and Wikipedia only
indicates two Conexant ADSL-related SoC as being part of this family
of ARM cores. Therefore, this commit removes this ARM family.
[Peter: remove nettle.mk reference as pointed out by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The BR2_GCC_TARGET_CPU defines a value for the BR2_arm920 case, but
this option does not exist. Therefore, this commit removes one line of
dead code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes following build failure:
--->---
self_smpl_multi.c: In function 'my_thread':
self_smpl_multi.c:354:2: error: implicit declaration of function 'pthread_barrier_wait' [-Werror=implicit-function-declaration]
pthread_barrier_wait(&barrier);
^
self_smpl_multi.c: In function 'main':
self_smpl_multi.c:450:2: error: implicit declaration of function 'pthread_barrier_init' [-Werror=implicit-function-declaration]
pthread_barrier_init(&barrier, 0, max_thr+1);
^
cc1: all warnings being treated as errors
--->---
And since xtensa, avr32 and bfin don't support NPTL we may remove arch
dependencies as well.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Wrap sa_restorer member definitions in #ifdef SA_RESTORER to be
consistent with their use.
If an architecture does not provide sa_restorer members but still
defines SA_RESTORER macro, the latter has to be explicitly undefined.
This change fixes compilation failures like this one:
signal.c: In function 'decode_old_sigaction':
signal.c:631:21: error: 'struct old_sigaction' has no member named
'sa_restorer'
signal.c: In function 'decode_new_sigaction':
signal.c:1224:21: error: 'struct new_sigaction' has no member named
'sa_restorer'
* signal.c (struct old_sigaction, struct old_sigaction32,
struct new_sigaction, struct new_sigaction32):
Wrap sa_restorer member in #ifdef SA_RESTORER.
(decode_old_sigaction, decode_new_sigaction):
Wrap use of sa32.sa_restorer in #ifdef SA_RESTORER.
Upstream commit:
c3a5c01051/
Fixes:
http://autobuild.buildroot.net/results/93e/93e54d8aecc5c178cc3465eb9fd5415461325285/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For some reason the kernel.org download hash doesn't match the
sourceforge hash so switch to kernel.org for the download.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
