Fixes http://autobuild.buildroot.org/results/1ea/1ea98985ce06dc1b7569ef5abe2fc13090fb5f3a
The upstream patch patches both configure.ac and configure, so we keep
that.
It is numbered 001 because it is an upstream patch, so it should come
before the buildroot patches.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some packages (actually, just oprofile) need to link against libiberty.
This option just installs libiberty.a so it has no effect on the target,
therefore it's not needed to add a config option for it.
Before binutils-2.24, there was a bug in libiberty/Makefile.in that
caused libiberty to be installed regardless of the
--enable-install-libiberty option. This problem wasn't noticed before
because binutils-2.24 is not selected on any of the autobuilders: the
version can only be selected if an internal toolchain is used, and it
defaults to 2.21.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In the Config.in file of package foo, it often happens that there are other
symbols besides BR2_PACKAGE_FOO. Typically, these symbols only make sense
when foo itself is enabled. There are two ways to express this: with
depends on BR2_PACKAGE_FOO
in each extra symbol, or with
if BR2_PACKAGE_FOO
...
endif
around the entire set of extra symbols.
The if/endif approach avoids the repetition of 'depends on' statements on
multiple symbols, so this is clearly preferred. But even when there is only
one extra symbol, if/endif is a more logical choice:
- it is future-proof for when extra symbols are added
- it allows to have just one strategy instead of two (less confusion)
This patch modifies the Config.in files accordingly.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the binutils source code is pulled from a Git repository, a
number of generated files are not present, and need to be
re-generated. Those files are generated by flex, bison, and texinfo,
so we need to pull the corresponding dependencies.
Notice that we tried avoiding the texinfo dependency by doing a number
of MAKEINFO tricks, but none of them worked properly, so we've instead
chosen to depend on host-texinfo.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
pkg-autotools.mk already handles static/shared linking, so no need to
explictly force it. Worse even, the build fails with BR2_PREFER_STATIC_LINK
as we end up calling libtool with --static when it tries to link the .so,
breaking the build:
../ld: attempted static link of dynamic object
`../opcodes/.libs/libopcodes.so'
collect2: error: ld returned 1 exit status
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2.21.1 is getting quite old, the linker issues with 2.22 seems to be
(mostly?) sorted out by now and armhf needs 2.22+, so let's bump the
default version.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ARM EABIhf support was introduced in Binutils 2.22, so earlier
versions should not be selected when EABIhf is used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When a Xtensa specific patch needs to be applied, it should be applied
both when doing the target and the host build.
This change is part of the effort to remove the differences between
host and target post-extract and post-patch hooks, that are
problematic for the out-of-tree support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
On commit 5538e47662 the versioned package
patches changed the directory structure but the packages weren't fixed.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Except for architecture and processor names, buildroot uses capitalized
configuration names, so change the macro names for xtensa to follow that
standard.
Change the overlay file to have a subdirectory for each component
(gdb, binutils, gcc, etc.) to make it more future-prove.
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Xtensa is a configurable processor architecture, which allows to define
additional instructions and registers. The required variant specific
information for the toolchain is delivered in an 'overlay' file, which
needs to be 'untarred' to the corresponding directories after the
source is installed and patched.
This patch provides support for binutils, gcc, and gdb with a very
limited changes to the build scripts. These additions are only executed
for the Xtensa architecture and have no effect on other architectures.
[Thomas: rebased on top of the 'arch: improve definition of gcc mtune,
mcpu, etc.' patch, and changed 'Target ABI' to 'Target Architecture
Variant'].
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
binutils version 2.23 is only available in .gz format, the older versions are in .bz2 format.
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
From now on, packages only need to select the BR2_PACKAGE_GETTEXT
option and depend on the 'gettext' package to get the necessary i18n
libraries installed on the target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: remove BR2_PACKAGE_LIBINTL]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
CC: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of providing two variables, make GNU_TARGET_NAME give the real
target name, and remove REAL_GNU_TARGET_NAME altogether.
Signed-off-by: Richard Braun <rbraun@sceen.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The BR2_CONFIGURE_DEVEL_SYSROOT, BR2_CONFIGURE_STAGING_SYSROOT and
BR2_CONFIGURE_BUILD_TOOLS were used only in a few places, and it is in
fact clearer to just use their value in the various places they are
used.
The ultimate goal is to get rid of the toolchain/Makefile.in file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* When select full binutils binaries use the default INSTALL_TARGET_CMDS
from AUTOTARGET.
* Menu config improvement.
* Install libiberty into Staging dir.
[Peter: Fix typos, Config.in fixes, install libiberty to target as well]
Signed-off-by: Benoit Mauduit <benoit.mauduit@openwide.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Otherwise we end up with libbfd/libopcodes in host/usr/$BUILD/$TARGET/lib,
used by the binaries. Unfortunately it also adds rpaths, which first look
in the build directory before here, causing trouble if the toolchain is
used outside BR (E.G. for a SDK) and the build directory location reused
for another incompatible build (E.G. another ARCH), as the binutils
binaries then end up using the wrong libs.
Fix it by linking statically instead.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Thanks to the pkgparentdir and pkgname functions, we can rewrite the
AUTOTARGETS macro in a way that avoids the need for each package to
repeat its name and the directory in which it is present.
[Peter: pkgdir->pkgparentdir]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Convert binutils to a proper autotargets package
* Add version 2.21 and drop version 2.17
* Hook up packaged binutils for target gcc
* Build tools are on HOST_DIR now so change it
* Move cross/host gcc to HOST_DIR
* Drop kludge from commit 3c77bab2ee
This is fixed in the next commit "gcc: install copies of libgcc,
libstdc++ and libgcj to the sysroot" - tested for arm & x86_64
targets.
* TARGET_CROSS now pointed to HOST_DIR too
[Peter: Config.in tweaks]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
