U-Boot 2017.07 has switched to SPL boot, which allows the same binary to
boot on imx6dl, imx6q and imx6qp sabresd boards.
Switch to the SPL mechanism.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Sysklogd had only SYSV init scripts. Add systemd service files to start
klogd and syslogd.
Signed-off-by: Petr Kulhavy <brain@jikos.cz>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The symlink to /etc/systemd/system/syslog.service was pointing 4 levels up
to /usr/lib instead of 3 levels up.
This wasn't an issue on the actual system (/../ equals to / ) but was causing a
deadlink in the TARGET directory.
Signed-off-by: Petr Kulhavy <brain@jikos.cz>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Dependency to json-c was dropped, updated reverse dependencies as well
and added optional dependency to libatomic_ops
https://cgit.freedesktop.org/pulseaudio/pulseaudio/tree/configure.ac#n250
when __sync_bool_compare_and_swap is not available.
Removed patch applied upstream:
0002-webrtc-C-11-is-only-required-for-WebRTC-support.patch
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
LIBC is really only used to construct the target tuple. To check if we
are using a uClibc toolchain, we use BR2_TOOLCHAIN_USES_UCLIBC.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When building bash statically, configure does not initialize the
SHOBJ_STATUS variable. The SHOBJ_STATUS make variable in
examples/loadables/Makefile.in must resolve to either 'supported' or
'unsupported'. Otherwise, the install-$(SHOBJ_STATUS) target does not
exist.
This leads to the following build failure:
make[2]: Entering directory '.../output/build/bash-4.4/examples/loadables'
make[2]: *** No rule to make target 'install-', needed by 'install'. Stop.
make[2]: Leaving directory '.../output/build/bash-4.4/examples/loadables'
Makefile:793: recipe for target 'install' failed
with the following defconfig:
BR2_arm=y
BR2_STATIC_LIBS=y
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
BR2_PACKAGE_BASH=y
Note that this doesn't terminate the build so it's not detected as an
error by the autobuilders.
Set SHOBJ_STATUS in the configure environment as a workaround.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Package switched to cmake without providing most of the autoconf
options previously available. Therefore we move all suboptions to
Config.in.legacy.
All patches are removed, the files to be patched do not exist anymore.
OPENOBEX_EXTRACT_CMDS is not needed anymore, upstream provides the
source as .tar.gz now.
Version 1.6 added support for libusb-1.x and udev. The current version
also supports bluez5_utils, not only bluez_utils.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Arnout: add help text to legacy options]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Includes some fixes for the Raspberry Pi, amongst many others.
Signed-off-by: Mahyar Koshkouei <mahyar.koshkouei@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reiterate once more that <packagename>_PATCH variable can point
to an arbitrary URL, not just to a path relative to <packagename>_SITE.
While we're at it, also explain that the patch should be added to the
.hash file.
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
[Arnout: add sentence about .hash file.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
configure.ac use PKG_CHECK_MODULES macro to find some libraries dependencies.
So add host-pkgconf in LVM2_DEPENDENCIES.
Fixes:
checking pkg-config is at least version 0.9.0... ./configure: line 9875: [...]/host/bin/pkg-config: No such file or directory
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix libglu build error
CXXLD libGLU.la
/home/buildroot/br4/output/host/lib/gcc/i586-buildroot-linux-gnu/6.4.0/../../../../i586-buildroot-linux-gnu/bin/ld: cannot find -lXext
/home/buildroot/br4/output/host/lib/gcc/i586-buildroot-linux-gnu/6.4.0/../../../../i586-buildroot-linux-gnu/bin/ld: cannot find -lX11
collect2: error: ld returned 1 exit status
using this defconfig
BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_NVIDIA_DRIVER=y
BR2_PACKAGE_LIBGLU=y
The nvidia binary blob is linked to libX11.so & libEext.so
$ output/host/bin/i586-buildroot-linux-gnu-readelf -a output/target/usr/lib/libGL.so | grep NEEDED
0x00000001 (NEEDED) Shared library: [libnvidia-tls.so.381.09]
0x00000001 (NEEDED) Shared library: [libnvidia-glcore.so.381.09]
0x00000001 (NEEDED) Shared library: [libX11.so.6]
0x00000001 (NEEDED) Shared library: [libXext.so.6]
0x00000001 (NEEDED) Shared library: [libc.so.6]
0x00000001 (NEEDED) Shared library: [libdl.so.2]
which is also reflected by Libs-section of package/nvidia-driver/gl.pc.
To allow other packages linking to libGL.so provided by this package we
need to reflect the fact that xlib_libX11 & xlib_libXext are not
runtime-only dependencies.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix build error
>>> libglu 9.0.0 Autoreconfiguring
configure.ac:50: error: Could not locate the pkg-config autoconf macros.
These are usually located in /usr/share/aclocal/pkg.m4. If your macros
are in a different location, try setting the environment variable
ACLOCAL="aclocal -I/other/macro/dir" before running autoreconf.
configure.ac:50: the top level
autom4te: /home/buildroot/br4/output/host/bin/m4 failed with exit status: 1
using this defconfig
BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_NVIDIA_DRIVER=y
BR2_PACKAGE_LIBGLU=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Version 2.18.x includes support for remotely controlling WebKitGTK+
based browsers using the standard WebDriver API. Typically this is used
by Web developers, and in most cases it will be desirable to disable it
from builds.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Release notes:
https://webkitgtk.org/2017/09/11/webkitgtk2.18.0-released.html
No corresponding WebKit Security Advisory (WSA) has been published.
All patches have been applied upstream.
This also bumps the required target GCC version, due to the WebKit code
now using more modern C++ features which were introduced in version
5.x of the compiler.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
[Arnout:
- propagate dependency to midori;
- mention in commit message why patches were removed.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
While currently there is no in-tree Buildroot package which depends on
host-python-six, it can be needed to build external packages.
Signed-off-by: Julien Floret <julien.floret@6wind.com>
Tested-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Switched to bz2 tarball, upstream does not provide a gz tarball anymore.
Rebased 0001-slsh-libs.patch according to
https://gitweb.gentoo.org/repo/gentoo.git/tree/sys-libs/slang/files/slang-2.3.1-slsh-libs.patch
Removed patches applied upstream:
0002-Enable-a-statically-linked-version-of-slsh.patch
0003-Disable-module-support-in-the-statically-linked-version-of-slsh.patch
0005-make-install-static-do-install-pkgconfig-as-install-.patch
Removed 0004-Rename-posix_close-function-to-posix_close_slfile.patch
after upstream committed a different solution, Alpine Linux did the
same when bumping to 2.3.1:
https://git.alpinelinux.org/cgit/aports/commit/main/slang?id=d4d252e4dea77c868259b0ef1f3d9cfbe6dc2152
Added sha256 hash and license file hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Arnout: Added sha256 hash and license file hash.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently it is always required to add package version as an argument to
the github helper. Since the version is always defined as PKG_VERSION,
drop this argument and generate it automatically inside the helper
routine.
The github helper function is extended to support both 2 and 3 argument
variants (ie. either use the provided package version argument or
automatically substitute with PKG_VERSION if not available), which can
make the transition of the package files easier as well allows using the
3-argument variant outside of package definitions.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
mbedtls provided libraries are interdependent. libmbedtls depends on
libmbedx509. Both depend on libmbedcrypto. When compression is enabled
libz is also needed.
Fixes:
http://autobuild.buildroot.net/results/79d/79d9aff5edb6a767c38efb54256a4f20fc36a6ee/
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
