When running the TestInitSystemSystemdRwIfupdown test, the rootfs must
be in read-write mode. The commit log [1] introducing systemd tests say
so:
"basic systemd, read-write, network w/ ifupdown"
With systemd 246.5, the service systemd-update-done return an error code
when it can't write on the filesystem (/etc)
[1] 117835d5fc
[2] 8019995e9a
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/830981813
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following flake8 warnings:
support/testing/tests/core/test_selinux.py:21:1: E302 expected 2 blank lines, found 1
support/testing/tests/core/test_selinux.py:38:1: E302 expected 2 blank lines, found 1
support/testing/tests/core/test_selinux.py:51:1: E302 expected 2 blank lines, found 1
support/testing/tests/core/test_selinux.py:62:1: E302 expected 2 blank lines, found 1
support/testing/tests/core/test_selinux.py:65:14: E127 continuation line over-indented for visual indent
support/testing/tests/init/test_systemd_selinux.py:53:1: E302 expected 2 blank lines, found 1
support/testing/tests/init/test_systemd_selinux.py:64:1: E302 expected 2 blank lines, found 1
Interestingly, the "continuation line over-indented for visual indent"
shows up only once, while the same pattern is there at multiple places
in the file. We fix all places with that over-indentation pattern.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Extract from bug report:
"Code line 120 to line 128 is to check whether the patch containing
"rename from" and "rename to". But it directly use grep to find,
ignoring the patch may be a tar file or else. It can only work on patch
of textfile form."
Fixes:
- https://bugs.buildroot.org/show_bug.cgi?id=11931
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The 2020.08-1 release of Bootlin toolchains has brought support for 3
additional architecture variants, so let's support them.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
glibc toolchains must be disabled for static only configuration.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some externals may wish to provide custom init systems for tightly
integrated boot. This has been supported through the BR2_INIT_NONE,
however a downside to the BR2_INIT_NONE is it forces the custom init
system to use either skeleton-custom and roll a custom skeleton for
each target, or skeleton-init-none which isn't a complete skeleton.
Allowing br2-external to define custom BR2_INIT_* means they can now
safely 'select' the BR2_PACKAGE_SKELETON_INIT_*, and re-use any of the
skeletons in Buildroot, or one from a br2-external tree.
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Today, the BR2_ROOTFS_SKELETON_CUSTOM is the only way to build a custom
skeleton. But it's limiting as users must provide a pre-built skeleton
for each target. Supporting a br2-external package allows users to build
up a skeleton and customize it with their own KConfig options.
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
apply-patches currently blindly removes *.orig / .*.orig files as GNU patch
by default writes these as backup files when patches only apply with fuzz.
This is unfortunate as package sources may contain files ending in .orig as
well, breaking the build. Luckily GNU patch can be told to not write these
backup files using the --no-backup-if-mismatch option, so used that instead
of the .orig removal step.
--no-backup-if-mismatch is supported since GNU patch 2.3.8 (1997-06-17) and
busybox patch if built with CONFIG_DESKTOP, but E.G. isn't supported by the
BSD patch, so add logic to dependencies.sh to error out if patch doesn't
support the flag.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, we handle three kinds of tests: basic, defconfig, and
runtime, and we treat them totally independently ones from the others.
Except for the basic tests that are ignored when defconfig or runtime
tests are explicitly requested.
The basic tests are also run systematically on all our reference
branches: master, next (when it exists), and the maintenance branches:
YYYY.MM.x.
Furthermore, we can see that the conditions to run each set of tests
are very similar, with only the explicit queries differing by name.
Rework the script so that the conditions are expressed only once, and
each set of tests is decided for each condition. This makes it easier
to decide what tests should run under what conditions.
Using GitLab-CI's schedules, with a variable expressing the actual test
to run, would seem the obvious choice to trigger the pipelines. However,
a schedule is configured for a specific branch, which means we would
need one schedule per branch we want to build per test cases we want to
run, *and* that we update those schedules when we add/remove branches
(e.g. when we open/close 'next', or a maintenance branch). This is not
very nice, as it requires some manual tweaking and twiddling on the web
UI.
Instead, we resort to using triggers, that will be triggered from a
cronjob on some server. Using a cronjiob allows us to more easily manage
the branches we want to test and test cases we want to run, to more
easily spread the load over the week, etc...
Note: triggering a pipeline can be done with a simple curl invocation:
$ curl -X POST \
-F "token=${YOUR_TOKEN}" \
-F "ref=${BRANCH_TO_TEST}" \
-F "variables[BR_SCHEDULE_JOBS]=${TEST_TO_RUN}" \
"https://gitlab.com/api/v4/projects/${YOUR_PROJECT_ID}/trigger/pipeline"
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add tests to ensure the packages SELinux functionalities (being able to
select an extra SELinux module in the refpolicy, and being able to
provide a custom SELinux module) are working as expected.
We use a BR2_EXTERNAL folder, provided in the tests, to use a custom
SELinux enabled package.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a test for BR2_PACKAGE_REFPOLICY_CUSTOM_GIT (which allows to select
a custom location for the SELinux refpolicy). The test uses the official
refpolicy as a test (we only want to test the functionality is working,
not that another refpolicy is correctly building; that is an user
problematic).
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a test for the BR2_REFPOLICY_EXTRA_MODULES_DIRS functionality (which
allows to provide custom SELinux modules).
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds a test for the BR2_REFPOLICY_EXTRA_MODULES
functionality (which allows to select extra modules within the SELinux
refpolicy using Kconfig).
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a test called 'SELinuxSystemdSquashfs' which will perform the same
tests as the Ext4 version, but using a Squashfs filesystem. Thanks to
this, we'll have a test on a real only filesystem.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This adds a test called 'SELinuxSystemdExt4'. This test will build an
SELinux enabled image with systemd, boot it, and perform a few runtime
tests to check SELinux related capabilities.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 9e4ffdc8cf modified the output of
'setlocalversion' so that the Buildroot version tag is included in the
output, the version part was added in Makefile.
Due to differences in behavior of the used git and Mercurial commands, this
caused different output for the Mercurial case, in BR2_VERSION_FULL and thus
/etc/os-release and 'make print-version'. Assuming the official Buildroot
releases are tagged and no project-specific tags are present, the output
after commit 9e4ffdc8cf is:
-hg<commit>
whereas it is expected to be something like:
2020.02.6-hg<commit>
Change the Mercurial case in setlocalversion to behave similar to git,
looking up the latest tag if the current revision is not itself tagged.
The number of commits after the latest tag is not added, unlike in git, as
this value is not commonly present in Mercurial output, and its added value
can be disputed in this context. Even one commit could bring a huge change
to the sources, so in order to interpret the number one has to look at the
repository anyhow, in which case the commit ID can just be used.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a minimal s390x s13 autobuild configuration for the
internal toolchain with glibc.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit a2830f0dad (support/gnuconfig: bump version) carried
spurious, uncommited local changes to config.sub, that were not
part of upstream commit d7a4dee7cc25e332b990d0a6d9f0ddd42cb33cf5.
Fix that by actually using the code as it is upstream.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr:
- squash the revert and the new bump into this commit
- ammend commit log accordingly
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When multiple conditions match simultaneously, even though that should
not happen in practice, we want the more "important" one to win over
the less "important" ones. For example, a tag is more important than a
branch name or a trigger.
Currently, the latest condition to match takes precendence over any
previous one, while we want the exact opposite.
Fix that with proper fallbacks in else-blocks.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes issues with the triple on IBM s390x and Z machines.
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
[yann.morin.1998@free.fr: update both, using the update script]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a new option that prints the (runtime) path of compiled .py files
when VERBOSE=1 is set.
Signed-off-by: Robin Jarry <robin.jarry@6wind.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When generating a .pyc file, the original .py source file path is
encoded in it. It is used for various purposes: traceback generation,
.pyc file comparison with its .py source, and code inspection.
By default, the source path used when invoking compileall is encoded in
the .pyc file. Since we use paths relative to TARGET_DIR, we end up with
paths that are only valid when relative to '/' encoded in the installed
.pyc files on the target.
This breaks code inspection at runtime since the original source path
will be invalid unless the code is executed from '/'.
Unfortunately, compileall cannot be forced to use the proper path. It
was not written with cross-compilation usage in mind.
Rework the script to call py_compile.compile() directly with pertinent
options:
- The script now has a new --strip-root argument. This argument is
optional but will always be specified when compiling py files in
buildroot.
- All other (non-optional) arguments are folders in which all
"importable" .py files will be compiled to .pyc.
- Using --strip-root=$(TARGET_DIR), the future runtime path of each .py
file is computed and encoded into the compiled .pyc.
No need to change directory before running the script anymore.
The trickery used to handle error reporting was only applicable with
compileall. Since we implement our own "compileall", error reporting
becomes trivial.
Previously, we had a --force option to tell compileall.compiledir() to
forcibly recompile files if they had changed. Now, we would have to
handle it ourselves. It turns out to not be easy and would need us to
delve into the format of bytecompiled files to extract metadata and
compare it with the expected values, that being even dependent on the
python version being used (fortunately, only two for us: python 2.7 and
the latext 3.x).
Still, this is deemed too complex, and byte-compiling is pretty fast, so
much so that it should be eclipsed by the build duration anyway.
So we just drop support for --force, and instead we always byte-compile.
Signed-off-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Robin Jarry <robin.jarry@6wind.com>
[yann.morin.1998@free.fr:
- always byte-compile
- drop --force
- expand commit log to state so and explain why
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Only run code when the script is executed directly (not imported).
Factorize command description by using the script's __doc__ variable.
Fix typo in --force help message.
Signed-off-by: Robin Jarry <robin.jarry@6wind.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, the check of defconfigs is run for all branches, even those
that are pushed only to run runtime tests. This is very inconvenient.
In fact, we only want to check the defconfigs on standard branches, that
is master, next, and the maintenance branches.
This will also decrease drastically the number gitlab-ci minutes used
when one pushes their repo to gitlab.com, where the number of CI minutes
are now going to be pretty severely restricted.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Note that those tests were so far ignored only when requesting a single
defconfig build, or a single runtime test build; everything else
was trigerring thoses tests.
However, it feels more natural that they are also ignored when all
defconfigs build. or all runtime tests, are explictly requested.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Note that we do not propagate the existing comment, because it is
partially wrong; instead we just keep the per-condition comments.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When we build the defconfigs, we already check they are correct, so
there is no need to run the correctness check explicitly.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Acked-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Note that we do not propagate the existing comment, because it is
partially wrong; instead we just keep the per-condition comments.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, the image name and version are duplicated in the main
pipeline and the generated, child pipeline.
This is a condition for a future gaffe, so let's use the image from the
main pipeline when generating the child one.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This script is currently very crude, but we're going to extend it, at
which point it will be nicer to have functions, local variables, et al.
Introduce a main() in preparation of those future evolutions.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Note that one is silenced, rather than fixed: we indeed need to import
after we add the local directory to the modules search path.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Move the code to run check-flake8 into the Makefile, like we have for
check-package, so that it is easy to run locally (and not wait for
someone to report a failure from their Gitlab pipelines).
Compared to the existing check from gitlab-ci.yml, the Makefile check
differs in this respect:
- don't explicitly find *.py files: they are supposed to also be found
as a result of running 'file' on them;
- use git ls-tree instead of find: this is supopsedly faster as it
uses the index rather than readdir();
- don't output the count of warnings or errors: the output is a single
integer, which is confusing when there are errors, and even more so
when there are no, when it is simply '0';
- don't sort: the output is already stable and independent from the
locale;
- don't report the number of processed files: this information is
rather useless, and getting a hold of it would be more challenging
in this new code.
Note: ideally, we would want to use --null, --zero, or similar options,
with utilities that generates or parses a files listing. While git
ls-tree and xargs do support it, it becomes a little bit tricky to use
the --print0 option of file, and then grep in that output (it is not
undoable, but would requires replacing grep+cut with some sed trickery).
Since we do not expect our scripts names to contain funky chars (like
\n or a colon), we just hand-wave away that issue (and the old code was
doing the same assumption too).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Current X.org X server is incompatible with this driver.
We no longer support unmaintainted versions of X.org X server.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When it was applied, commit 243d500f8d (support/testing: add openssh
runtime test) was amended to not provide a NIC to the emulated machine,
as the test did not require access to the outer world: it only uses the
lo interface. Also, there was a discrepancy between the NIC name in the
Buildroot configuration, and the drivers available in our default kernel
image, making the boot hang for a while whaiting for a NIC that would
never come.
However, that tweak was tested locally with a qmeu version more recent
than the one available in our buidroot/base Docker image. As a
consequence, that test fails to run in gitlab-ci.
Revert to using the old way of specifying no network: it works on
gitlab-ci, and qemu versions in standard distros still support it.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop the debug-level print as noticed by Titouan.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Titouan Christophe <titouan.christophe@railnova.eu>
This commit adds the new test cases generated automatically by the
bl-toolchains-gen script, to test the integration of the Bootlin
toolchains.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
https://toolchains.bootlin.com/ has been providing for a few years a
number of ready-to-use pre-built toolchains, for a wide range of
architectures (which it turns out, are all built using Buildroot).
While toolchains.bootlin.com provides Buildroot config fragments to
easily use those toolchains with Buildroot (see [0] for example), this
is not visible anywhere. So instead, we would like to add support for
these toolchains in Buildroot just like we have existing support for
Linaro, ARM, Synopsys, etc. toolchains.
[0] https://toolchains.bootlin.com/downloads/releases/toolchains/aarch64/fragments/aarch64--glibc--bleeding-edge-2020.02-2.frag
However, the number of toolchains provided by toolchains.bootlin.com
is really large, and they are regularly updated. Maintaining that
manually would be time consuming and error-prone. So instead, this
commit introduces a script that automatically generates:
- toolchain/toolchain-external/toolchain-external-bootlin/Config.in.options
- toolchain/toolchain-external/toolchain-external-bootlin/toolchain-external-bootlin.mk
- toolchain/toolchain-external/toolchain-external-bootlin/toolchain-external-bootlin.hash
- support/testing/tests/toolchain/test_external_bootlin.py
We create a single external toolchain package, with a Kconfig "choice"
as a sub-option to select the toolchain variant to be used. The script
contains a Python dict that provides the mapping between the
toolchains provided by toolchains.bootlin.com, and the architecture
options/variants they are applicable to.
The test cases allow to verify that the toolchain configuration is
correct, and that it is able to build a Busybox based system. It
doesn't do any runtime testing as such testing is already done by
toolchains.bootlin.com: the test cases here are only meant to verify
that the toolchain-external-bootlin package works as expected.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Titouan Christophe <titouan.christophe@railnova.eu>
Tested-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This scripts takes as entry on stdin a JSON description of the package
used for a given configuration. This description is the one generated
by "make show-info".
The script generates the list of all the packages used and if they are
affected by a CVE. The output is either a JSON or an HTML file similar
to the one generated by pkg-stats.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Matthew Weber <matthew.weber@rockwellcollins.com>=
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The affects method of the CVE uses the Package class defined in
pkg-stats. The purpose of migrating the CVE class outside of pkg-stats
was to be able to reuse it from other scripts. So let's remove the
Package dependency and only use the needed information.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In 2019, the JSON vulnerability feeds switched their schema from
version 1.0 to 1.1.
The main difference is the removal of the "affects" element that we
were using to check if a package was affected by a CVE.
This information is now available in the "configuration" element which
contains the cpeid as well as properties about the versions
affected. Instead of having a list of the versions affected, with
these properties, it is possible to have a range of versions.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In order to be able to use the CVE checking logic outside of
pkg-stats, move the CVE class in a module that can be used by other
scripts.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some CVE entries in the NVD database have version_value set to "-",
which seems to indicate that it applies to all versions of the
software project, or that they don't really know which versions are
affected, and which are not.
So, for the benefit of doubt, it seems more appropriate to consider
such CVEs as affecting our packages.
This makes the total number of CVEs affecting our next branch jump
from 141 CVEs to 658 CVEs, but that number will go back down once we
switch to the JSON 1.1 schema. Indeed, in the JSON 1.0 schema, there
are often cases where a version_value is set to "=" *and* specific
versions are set to.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As we recently stopped testing the x86-64 Sourcery toolchain, it means
we no longer have any x86-64 glibc based toolchain in our
autobuilders. Since this is a pretty common configuration, it makes
sense to test it, which this commit does by adding a config fragment
to use the x86-64 glibc bleeding edge Bootlin toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This toolchain uses an old gcc 6.2.0, and newer versions of the
toolchain are no longer publicly available. This old gcc 6.2.0 causes
build issues of Boost, which are unfixable without updating the
toolchain. As we're about to drop support for this toolchain entirely,
we must stop testing it in our autobuilder infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Modeled after similar python packages.
However, this one is picky, and throws an exception when it
detects that it is not running on a Raspberry Pi. So we just
catch that exception and check this is what we expect.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Christian Stewart <christian@paral.in>
Cc: Michael Fischer <mf@go-sys.de>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Ian Haylock <haylocki@yahoo.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This new runtime test is based on test_dropbear.py. The only required change
is to use "-oStrictHostKeyChecking=no" instead of "-y" to accept the new key.
Since the base test infra only provide a uClibc-ng toolchain, add a second
test using a glibc based internal toolchain.
For example, this allow to trigger the openssh 8.1p bug with glibc 2.31 [1].
[1] https://bugs.archlinux.org/task/65386
Signed-off-by: Romain Naour <romain.naour@smile.fr>
yann.morin.1998@free.fr:
- deduplicate the whole test
- don't provide any NIC, we only need and use lo
- simplify post-build script (append with cat, don't munge with sed)
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The TestExternalToolchain() base class implement a test checking if
the ELF interpreter that is advertised by Busybox really exists in the
rootfs. Of course, this only makes sense with ELF toolchains. Until
now, only ELF toolchains were tested, but we are going to use
TestExternalToolchain() with non-ELF toolchains as well, so let's make
this conditional.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: strip() lines during readlines()]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The pkg-stats script now uses Python3 only constructs (the "async"
keyword) and therefore fails to pass the Python2 flake8 test.
Let's use the Python3 flake8 instead.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/681711009
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since commit 4a40d36f13
("support/testing: switch to Python 3 only") our runtime testing
infrastructure is Python 3.x only.
Therefore, it is no longer needed to have python-nose2 and
python-pexpect in the Docker container used to run our Gitlab CI jobs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
support/scripts/pkg-stats now uses some Python 3.x only constructs
("async" and related keywords), so we must use the Python 3.x flake8.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit slightly improves the output of pkg-stats by showing the
progress of the upstream URL checks and latest version retrieval, on a
package basis:
Checking URL status
[0001/0062] curlpp
[0002/0062] cmocka
[0003/0062] snappy
[0004/0062] nload
[...]
[0060/0062] librtas
[0061/0062] libsilk
[0062/0062] jhead
Getting latest versions ...
[0001/0064] libglob
[0002/0064] perl-http-daemon
[0003/0064] shadowsocks-libev
[...]
[0061/0064] lua-flu
[0062/0064] python-aiohttp-security
[0063/0064] ljlinenoise
[0064/0064] matchbox-lib
Note that the above sample was run on 64 packages. Only 62 packages
appear for the URL status check, because packages that do not have any
URL in their Config.in file, or don't have any Config.in file at all,
are not checked and therefore not accounted.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit reworks the code that checks if the upstream URL of each
package (specified by its Config.in file) using the aiohttp
module. This makes the implementation much more elegant, and avoids
the problematic multiprocessing Pool which is causing issues in some
situations.
Suggested-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit reworks the code that retrieves the latest upstream
version of each package from release-monitoring.org using the aiohttp
module. This makes the implementation much more elegant, and avoids
the problematic multiprocessing Pool which is causing issues in some
situations.
Since we're now using some async functionality, the script is Python
3.x only, so the shebang is changed to make this clear.
Suggested-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit slightly improves the output of pkg-stats by showing the
progress of the upstream URL checks and latest version retrieval, on a
package basis:
Checking URL status
[0001/0062] curlpp
[0002/0062] cmocka
[0003/0062] snappy
[0004/0062] nload
[...]
[0060/0062] librtas
[0061/0062] libsilk
[0062/0062] jhead
Getting latest versions ...
[0001/0064] libglob
[0002/0064] perl-http-daemon
[0003/0064] shadowsocks-libev
[...]
[0061/0064] lua-flu
[0062/0064] python-aiohttp-security
[0063/0064] ljlinenoise
[0064/0064] matchbox-lib
Note that the above sample was run on 64 packages. Only 62 packages
appear for the URL status check, because packages that do not have any
URL in their Config.in file, or don't have any Config.in file at all,
are not checked and therefore not accounted.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit reworks the code that checks if the upstream URL of each
package (specified by its Config.in file) using the aiohttp
module. This makes the implementation much more elegant, and avoids
the problematic multiprocessing Pool which is causing issues in some
situations.
Suggested-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit reworks the code that retrieves the latest upstream
version of each package from release-monitoring.org using the aiohttp
module. This makes the implementation much more elegant, and avoids
the problematic multiprocessing Pool which is causing issues in some
situations.
Since we're now using some async functionality, the script is Python
3.x only, so the shebang is changed to make this clear.
Suggested-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump of ATF to 2.2 for the ATF Vexpress test case in commit
fc3d6a3ed0
("support/testing/tests/boot/test_atf: update U-Boot/ATF use in
TestATFVexpress"), DTC is now needed otherwise the build fails with:
make[2]: dtc: Command not found
Makefile:873: recipe for target 'build/juno/release/fdts/juno_tb_fw_config.dtb' failed
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/674934470
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove patch that is no longer needed as of upstream commit
1c33be992e8120abd20add8021e4d91d226f5b6a which removed the old VM.
We need to add an exclusion rule for guile modules to check-bin-arch
as they appear as valid ELF binaries but with an architecture of
"None".
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[Thomas:
- bump to 3.0.4
- rework how check-bin-arch excludes checking the Guile .go files]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update our bleeding edge br-arm-internal-glibc defconfig to use the
latest version of gcc and binutils, so that we test these in the
autobuilders.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit 0390777bfa (package/docker-engine: needs some kernel
options), docker-engine now automatically ensures the needed kernel options
are enabled, so drop the explicit options from the kernel config.
23:19:27 TestDockerCompose Starting
23:19:28 TestDockerCompose Building
00:14:41 TestDockerCompose Building done
00:15:30 TestDockerCompose Cleaning up
.
----------------------------------------------------------------------
Ran 1 test in 3362.784s
OK
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit 4f8229653 (package/docker-engine: needs more runtime
dependencies), docker-engine now automatically pulls in cgroupfs-mount, so
drop the explicit handling of it in TestDockerCompose.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_VERSION_FULL is currently defined as follows:
BR2_VERSION_FULL := $(BR2_VERSION)$(shell $(TOPDIR)/support/scripts/setlocalversion)
This BR2_VERSION_FULL value then gets used as the "VERSION" variable
in the /etc/os-release file.
The logic of "setlocalversion" is that if it is exactly on a tag, it
returns nothing.
If it is on a tag + a number of commits, then it returns only
-XYZ-gABC where XYZ is the number of commits since the last tag, and
ABC the git commit hash (these are extracted from git describe).
This output then gets concatenated to BR2_VERSION which gives
something like 2020.05 or 2020.05-00123-g5bc6a.
The issue is that when you're on a tag specific to your project, which
is not a Buildroot YYYY.MM tag, then the output of setlocalversion is
empty, and all you get as VERSION in os-release is $(BR2_VERSION)
which is not really nice. Worse, if you have another non-official
Buildroot tag between the last official Buildroot tag/version and
where you are, you will get $(BR2_VERSION)-XYZ-gABC, but XYZ will not
correspond to the number of commits since BR2_VERSION, but since the
last tag that "git describe" as found, which is clearly incorrect.
Here is an example: you're on master, "make print-version" (which
displays BR2_VERSION_FULL) will show:
$ make print-version
2020.08-git-00758-gc351877a6e
So far so good. Now, you create a tag say 5 commits "before" master,
and show BR2_VERSION_FULL again:
$ git tag -a -m "dummy tag" dummy-tag HEAD~5
$ make print-version
2020.08-git-00005-gc351877a6e
This makes you believe you are 5 commits above 2020.08, which is
absolutely wrong.
So this commit simplifies the logic of setlocalversion to simply
return what "git describe" provides, and not prepend $(BR2_VERSION) in
the main Makefile. Since official Buildroot tags match official
Buildroot version names, you get the same output when you're on an
official Buildroot tag, or some commits above a Buildroot tag. An in
other cases, you get a sensible output. The logic is also adjusted for
the Mercurial case.
In the above situation, with this commit applied, we get:
$ make print-version
dummy-tag-6-g6258cdddeb
(6 commits instead of 5 as we have this very commit applied, but at
least it's 6 commits on top of the dummy-tag)
Finally, if you're not using a version control system, setlocalversion
was already returning nothing, so in this case, the Makefile simply
sets BR2_VERSION_FULL to BR2_VERSION to preserve this behavior.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The defconfig check has been introduced by the previous
patch before the building each defconfig but those builds
are done every week or more.
Checking if a defconfig is valid can be done on every
push in the repository since it take few seconds.
This would allow to detect as soon as possible a problem
in a defconfig and eventually avoid breaking the build
while build testing all defconfig.
Introduce a new job template ".defconfig_check" in
gitlab-ci.yml.in and modify the generate-gitlab-ci-yml
to create a job for each defconfig to run the test.
Although, we could have used only one job to do all
tests, using one job per defconfig allow to identify
easily in gitlab which defconfig is falling.
Tested:
https://gitlab.com/kubu93/buildroot/pipelines/138331069https://gitlab.com/kubu93/buildroot/pipelines/171223758
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Use the script added by the previous patch to check
generated config files.
Tested on gitlab:
https://gitlab.com/kubu93/buildroot/pipelines/137597966
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
For the same reason as for 50b747f212,
we need to check if the generated configuration file (.config)
contains all symbols present in the defconfig file.
If not there is an issue with the defconfig.
This script will be used in .gitlab-ci.yml.
Inspired by is_toolchain_usable() function from genrandconfig:
https://git.busybox.net/buildroot/tree/utils/genrandconfig?h=2020.02#n164
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr:
- strip defconfig lines when reading them
- use a generator to read the defconfig lines
- no need to strip() again when building the missing list
- testing the list directly, not its len()
- simply sys.exit(1) in the error condition
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Move to an external RISC-V 64 bit musl toolchain to ease the load
on the autobuilders.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a RISC-V 64-bit autobuild configuration for the internal
toolchain with uclibc.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since Gitlab 12.9, Gitlab allow to trigger child pipeline with generated configuration file.
See: https://gitlab.com/gitlab-org/gitlab/-/issues/35632
This allow us to stop updating the .gitlab-ci.yml file when a
new defconfig is added to Buildroot.
Remove check-gitlab-ci.yml job since it is now uneeded.
Remove .gitlab-ci.yml make target.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
[ann.morin.1998@free.fr: manual: no longer needed to update at all]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As no package depends on the standalone cargo package, it can be
dropped.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: David Pierret <david.pierret@smile.fr>
Tested-by: David Pierret <david.pierret@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop fix rpath patch which is no longer needed.
Drop g-ir-scanner/g-ir-compiler override patch which is now upstream.
Rebase remaining patches.
Meson now requires single quotes for cross-compilation.conf, replace
double quotes with single quotes.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This fixes the following flake8 warning:
support/scripts/pkg-stats:1005:9: E117 over-indented
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With python 3, when a package has a version number x-y-z instead of
x.y.z, then the version returned by LooseVersion can't be compared
which raises a TypeError exception:
Traceback (most recent call last):
File "./support/scripts/pkg-stats", line 1062, in <module>
__main__()
File "./support/scripts/pkg-stats", line 1051, in __main__
check_package_cves(args.nvd_path, {p.name: p for p in packages})
File "./support/scripts/pkg-stats", line 613, in check_package_cves
if pkg_name in packages and cve.affects(packages[pkg_name]):
File "./support/scripts/pkg-stats", line 386, in affects
return pkg_version <= cve_affected_version
File "/usr/lib64/python3.8/distutils/version.py", line 58, in __le__
c = self._cmp(other)
File "/usr/lib64/python3.8/distutils/version.py", line 337, in _cmp
if self.version < other.version:
TypeError: '<' not supported between instances of 'str' and 'int'
This patch handles this exception by adding a new return value when
the comparison can't be done. The code is adjusted to take of this
change. For now, a return value of CVE_UNKNOWN is handled the same way
as a CVE_DOESNT_AFFECT return value, but this can be improved later
on.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some packages requires support on the build machine to create gcc
plugins. This commit adds a blind option,
BR2_NEEDS_HOST_GCC_PLUGIN_SUPPORT, which such packages can
select. When this option is enabled, the logic in support/dependencies
verifies that everything needed on the build machine to build gcc
plugins is available.
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Buildroot currently installs openjdk-bin to $(HOST_DIR)/ instead of the more
traditional (for java installations) $(HOST_DIR)/usr/lib/jvm.
As described in https://bugs.busybox.net/show_bug.cgi?id=13001
"Openjdk-bin provides it's own libfreetype.so and places it into
$(HOST_DIR)/lib/. This library causes build failures with the
host-xapp_mkfontscale package due to the overwritten libfreetype.so.
mkfontscale.o: In function `doDirectory':
mkfontscale.c:(.text+0x1a80): undefined reference to `FT_Get_BDF_Property'
collect2: error: ld returned 1 exit status
Reproducing the error is done by repeating the following steps.
make host-freetype
make host-openjdk-bin
make host-xapp_mkfontscale"
There are two options for fixing this problem:
1) add host-freetype and host-lksctp-tools as dependencies to host-openjdk-bin
and then remove the provided libfreetype.so and libsctp.so libraries
in a post_extract_hook.
2) change the installation directory from $(HOST_DIR)/ to
$(HOST_DIR)/usr/lib/jvm just like the target OpenJDK package and
copy the entire source directories contents to the above location.
The second option provides the following advantages:
- the directory structure is consistent with how we handle the target OpenJDK.
- the HOST_OPENJDK_BIN_INSTALL_CMDS step is simplified.
- packages such as Maven require directories of which we are currently not
copying. These missing directories cause programs such as Maven to crash
when running with an error such as
"Can't read cryptographic policy directory: unlimited."
- does not miss any other libraries that solution 1 would not cope with
(e.g. libzip.so from host-libzip, or libnet.so from not-yet existing
host-libnet, or libsctp.so from not-yet existing host-lksctp-tools)
Because the second option is both simple, easier to implement, is low-impact,
and fixes the problems described above wholly, it is the best to implement.
To implement the above changes, we must also modify the following files in the
same patch to match the host's new directory paths:
- openjdk.mk
- openjdk-jni-test.mk
- openjdk-hello-world.mk
To avoid having to change all those packages in the future, expose two
new variables, HOST_OPENJDK_BIN_ROOT_DIR which contains the path where
the openjdk-bin was installed in, and JAVAC, which contains the path to
the javac compiler (modeled after the way the autoconf et al. variables
are set and exposed).
Tested with:
./support/testing/run-tests -o out -d dl tests.package.test_openjdk.TestOpenJdk
Fixes: https://bugs.busybox.net/show_bug.cgi?id=13001
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr:
- introduce HOST_OPENJDK_BIN_ROOT_DIR and JAVAC
- expand and tweak the commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Older versions of git store the absolute path of the submodules'
repository as stored in the super-project, e.g.:
$ cat some-submodule/.git
gitdir: /path/to/super-project/.git/modules/some-submodule
Obviously, this is not very reproducible.
More recent versions of git, however, store relative paths, which
de-facto makes it reproducible.
Fix older versions by replacing the absolute paths with relative ones.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The error is misleading: it reports that no name was provided,
when in fact the external.desc file is missing.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>p
Reviewed-by: Romain Naour <romain.naour@gmail.com>
When a br2-external tree has an issue, e.g. a missing file, or does not
have a name, or the name uses invalid chars, we report that condition by
setting the variable BR2_EXTERNAL_ERROR.
That variable is defined in the script support/scripts/br2-external,
which outputs it on stdout, and checked by the Makefile.
Before d027cd75d0, stdout was explicitly redirected to the generated
.mk file, with exec >"${ofile}" as the Makefile and Kconfig
fragments were generated each with their own call to the script, and
the validation phase would emit the BR2_EXTERNAL_ERROR variable in the
Makefile fragment.
But with d027cd75d0, both the Makefile and Kconfig fragments were now
generated with a single call to the script, and as such the semantics of
the scripts changed, and only each of the actual generators, do_mk and
do_kconfig, had their out put redirected. Which left do_validate with
the default stdout. Which would emit BR2_EXTERNAL_ERROR on stdout.
In turn, the stdout of the script would be interpreted by as part of the
Makefile. But this does not end up very well when a br2-external tree
indeed has an error:
- missing a external.desc file:
Makefile:184: *** multiple target patterns. Stop.
- empty external.desc file:
Config.in:22: can't open file "output/.br2-external.in.paths"
So we must redirect the output of the validation step to the
Makefile fragment, so that the error message is correctly caught by the
top-level Makefile.
Note that we don't need to append in do_mk, and we can do an overwrite
redirection: if we go so far as to call do_mk, it means there was no
error, and thus the fragment is empty.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
In commit ff9f778c66 (support/gnuconfig: update to 2019-05-28), we
forgot to update the README to reference the sha1 we're using, keeping
the old one from 2016...
Update it now.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The commit 0f0649140f introduced a change
in the module name: utf8 -> lua-utf8.
The packages-file-list.txt show the change in the files intalled on the rootfs:
[lua-utf8 0.1.2-2 latest version]
lua-utf8,./usr/lib/luarocks/rocks-5.1/luautf8/0.1.2-2/doc/LICENSE
lua-utf8,./usr/lib/luarocks/rocks-5.1/luautf8/0.1.2-2/doc/README.md
lua-utf8,./usr/lib/luarocks/rocks-5.1/luautf8/0.1.2-2/luautf8-0.1.2-2.rockspec
lua-utf8,./usr/lib/luarocks/rocks-5.1/luautf8/0.1.2-2/rock_manifest
lua-utf8,./usr/lib/lua/5.1/lua-utf8.so
[lua-utf8 1.2-0 previous version]
lua-utf8,./usr/lib/luarocks/rocks-5.1/utf8/1.2-0/doc/README.md
lua-utf8,./usr/lib/luarocks/rocks-5.1/utf8/1.2-0/utf8-1.2-0.rockspec
lua-utf8,./usr/lib/luarocks/rocks-5.1/utf8/1.2-0/rock_manifest
lua-utf8,./usr/lib/lua/5.1/utf8.so
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/526036036
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As reported by a gitlab runtime test [1] and on the mailing list
[2], some runtime tests are failing on slow host machines when
the qemu-system-<arch> is missing on the host.
The boot-qemu-image.py script need to wait some time after
calling pexpect.spawn() in order to make sure that the qemu
process has been executed in start-qemu.sh.
If start-qemu.sh failed due to missing qemu-system binary
an exception will be thrown by child.expect() and should be
catched by the error handling (pexpect.EOF).
After spending a lot of time to investigate with Yann E. MORIN
[3]. It seems that short-lived child processes are a corner-case
that is not very correctly handled...
Without adding a sleep(1), child.expect() can trigger an
exception before setting the exitstatus of the spawned
process. This issue can be reproduced on a gitlab runner or
by adding "exit 1" in the first line of start-qemu.sh
(after the shebang).
There is even the same workaround in some pexpect examples [4].
Thanks to Yann for the help while investigating the issue.
Tested:
https://gitlab.com/kubu93/buildroot/pipelines/138472925
[1] https://gitlab.com/kubu93/buildroot/pipelines/135487475
[2] http://lists.busybox.net/pipermail/buildroot/2020-April/280037.html
[3] http://patchwork.ozlabs.org/project/buildroot/patch/20200418161023.1221799-1-romain.naour@gmail.com/
[4] https://github.com/pexpect/pexpect/blob/master/examples/ssh_tunnel.py#L80
Fixes:
https://gitlab.com/kubu93/buildroot/-/jobs/509053135
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: reorder imports]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This script is intended to be used by gitlab CI to test at runtime Qemu
images generated by Buildroot's Qemu defconfigs.
This allows to troubleshoot different issues that may be associated with
defective builds by lanching a qemu machine, sending root password,
waiting for login shell and then perform a shutdown.
This script is inspired by toolchain builder [1] and the Buildroot
testing infrastructure.
The gitlab CI will call this script for each defconfig build but only
Qemu defconfig will be runtime tested, all others defconfig are ignored.
Some Qemu defconfig must be used with a specific Qemu version (fork)
that is not always available, so the script doesn't error out when it
can't spawn a missing command. That condition is anyway printed in the
log.
Finally, the script start Qemu like it's done for the Buildroot
testing infrastructure (using pexpect).
Note:
We noticed some timeout issues with pexpect when the Qemu machine is
powered off. That's because Qemu process doesn't stop even if the
system is halted (after "System halted"). So the script doesn't error
out when such timeout occure. The behaviour depends on the architecture
emulated by Qemu.
[1] https://github.com/bootlin/toolchains-builder/blob/master/build.sh
Signed-off-by: Jugurtha BELKALEM <jugurtha.belkalem@smile.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When the 'nvd-path', 'json' and 'html' are used like this:
--html ~/foo
then the tilde expansion is properly done by the shell. However, when
they are used like this:
--html=~/foo
The shell doesn't do the tilde expansion, and pkg-stats doesn't do
it. This commit modifies pkg-stats to ensure that tilde expansion is
done when parsing the 'nvd-path', 'json' and 'html' arguments.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[Thomas: improve commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As of upstream commit 735eb608637e7bbab4082a541ac802cc919fec22,
available since version v20.1.1, support for Python 2.x has been
dropped, and Python >= 3.5 is required. So we make python-txaio depend
on python3, and remove the python2 test of python-txaio.
We also remove the python-six dependency which is no longer used by
txaio, since upstream commit 62b0e7eaa22769687df1de8f57374cb0a42bdc4d.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Upstream commit
c0223223f8,
which has been part of the releases since v20.1.2 has dropped support
for Python 2.x. So python-autobahn is now only available for Python
3.x.
We therefore remove the Python 2.x autobahn tests, and while at it,
drop the python-six dependency, which is no longer needed since
upstream commit
79bd2ba41b,
part of the releases since v20.1.3.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, the build continue even if some symbols disapear from
the generated dot config file (.config).
This patch add a new check in order to stop the test if one
of the provided symbol is missing. This must be treated as error.
For example, if a symbol disapear due to new dependency constraints.
Inspired by is_toolchain_usable() function from genrandconfig:
https://git.busybox.net/buildroot/tree/utils/genrandconfig?h=2020.02#n164
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
TestPythonPackageBase.config provide already the basic uClibc toolchain.
So by adding the symbols for the linaro toolchain some warning are printed
at while loading the configuration:
.config:16:warning: override: reassigning to symbol BR2_TOOLCHAIN_EXTERNAL
.config:16:warning: override: BR2_TOOLCHAIN_EXTERNAL changes choice state
.config:17:warning: override: reassigning to symbol BR2_TARGET_ROOTFS_CPIO
.config:21:warning: override: BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM changes choice state
So, some symbol disapear from the generated dot config (.config) leading
to an error due to a new check in the testsuite infra.
Since this test should use the Linaro toolchain, remove
TestPythonPackageBase.config add BR2_arm=y and disable the rootfs tar option.
While at it, re-order the options so that they appear in the same
order as they appear in a defconfig.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Adam Duskett <Aduskett@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Until now, the lxc test was using the ARM CodeSourcery 2014.05 armv5 toolchain.
But the recent systemd version bump to 245 added a toolchain dependency
on systemd package due to build issues with gcc < 5.0.
Before [1] the lxc test was failing to build with the ARM CodeSourcery 2014.05
toolchain. After [1], the test is faling at runtime since the
"BR2_INIT_SYSTEMD=y" symbol disapear from the dot config (.config) due to
the new toolchain dependency.
Fix this by using the same toolchain as for the systemd tests [2]
[1] 2196ee25ff
[2] b3d979c0d1
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BR2_GENERATE_LOCALE can only be used by uClibc based toolchains with the
internal toolchain backend [1].
The test_tmux is using a external uClibc toolchain, so the
"BR2_GENERATE_LOCALE="en_US.UTF-8"" line disapear from
the generated dot config (.config) leading to an error due to
a new check in the testsuite infra.
[1] https://git.buildroot.net/buildroot/commit/?id=bd0ffe2206fbd32baf7f4a1dc5fde81cfad70462
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BR2_TOOLCHAIN_EXTERNAL_LOCALE is only defined for uClibc based
custom external toolchains.
The test_glxinfo is using a glibc toolchain, so the
"# BR2_TOOLCHAIN_EXTERNAL_LOCALE is not set" line disapear from
the generated dot config (.config) leading to an error due to
a new check in the testsuite infra.
There is the same problem with:
BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS_DEBUG=y
BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS=y
BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS_NPTL=y
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BR2_TOOLCHAIN_EXTERNAL_LOCALE is only defined for uClibc based
custom external toolchains.
The test_syslinux is using a glibc toolchain, so the
"# BR2_TOOLCHAIN_EXTERNAL_LOCALE is not set" line disapear from
the generated dot config (.config) leading to an error due to
a new check in the testsuite infra.
There is the same problem with:
BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS_DEBUG=y
BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS=y
BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS_NPTL=y
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds four new tests for the syslinux bootloader:
- Building on x86, for legacy BIOS
- Building on x86, for EFI BIOS
- Building on x86-64, for legacy BIOS
- Building on x86-64, for EFI BIOS
Runtime testing in Qemu would certainly be possible, but is left as a
future addition to these tests.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the toolchain being used by the testsuite infra.
The new toolchain 2018.11-1 is based on gcc 8.2, uClibc-ng 1.0.30,
linux-headers 4.14 and binutils 2.31.1.
Enable BR2_TOOLCHAIN_HAS_THREADS_DEBUG that is now required.
The old toolchain 2017.05 is based on gcc 4.9, uClibc-ng 1.0.25,
linux-headers 3.10 and binutils 2.27.
Tested with gitlab
https://gitlab.com/kubu93/buildroot/pipelines/132376578
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Following commit eee96b0f0a that adds a
gcc patch for OpenRISC, the OpenRISC pre-built toolchain was
rebuilt. Let's use this new toolchain version for the autobuilders.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
make-4.3 shipped with a backward incompatible change in how sharp signs
are handled in macros. Previously, up to make 4.2, the sharp sign would
always start a comment, unless backslash-escaped, even in a macro or a
fucntion call.
Now, the sharp sign is no longer starting a comment when it appears
inside such a macro or function call. This behaviour was supposed to be
in force since 3.81, but was not; 4.3 fixed the code to match the doc.
As such, use of external toolchains is broken, as we use the sharp sign
in the copy_toolchain_sysroot macro, in shell variable expansion to
strip off any leading /: ${target\#/}.
Fix that by applying the workaround suggested in the release annoucement
[0], by using a variable to hold a sharp sign.
[0] https://lists.gnu.org/archive/html/info-gnu/2020-01/msg00004.html
Signed-off-by: Yaroslav Syrytsia <me@ys.lc>
[yann.morin.1998@free.fr:
- move the SHARP_SIGN definition out of Makefile and into support/
- expand the commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The older version of flake8 on the autobuilders does not support typehints.
As such, flake8 throws the following error when scanning sample_gst1_python:
E999 SyntaxError: invalid syntax
Remove the typehinting from on_message to fix this issue.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The config is missing the following packages:
- BR2_PACKAGE_GST1_PLUGINS_BASE
This is needed for the videotestsrc plugin which provides
videotestsrc.
- BR2_PACKAGE_GST1_PLUGINS_BAD
This is needed for the debugutils plugin which provides
fakevideosink.
- BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_VIDEOTESTSRC
videotestsrcplugin used by the example pipeline.
- BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_DEBUGUTILS
fakevideosink plugin used by the example pipeline.
The sample was also amended to fix:
- no call to main.
- using autovideosink instead of fakevideosink. Using Fakevideoskink
is preferred because its primary purpose is for debugging and sample
pipelines. Autovideosink does not work because there is no video
output device.
- No function on_message. Without this function, the script fails
because of the missing function.
- The script sets the pipeline to Gst.State.EOS instead of
Gst.State.NULL which results in a failed pipeline state. When the
state is set to NULL, gstreamer automatically calls EOS. Manually
setting the pipeline state to EOS results in the following error:
Trying to dispose element sink, but it is in PLAYING instead of
the NULL state. You need to explicitly set elements to the NULL
state before dropping the final reference, to allow them to
clean up. A refcounting bug may also cause this problem in the
application or some element.
In addition, the default timeout is set too low and would result in a
test failure, this has been changed to 200 seconds.
These issues are now properly fixed, and the sample script passes.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr:
- meld the two patches together
- add the print() in the on_demand callback
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This reverts commit 25033cfb86.
This perl package is deprecated and gives following recommendations while
building:
*** THIS IS NOT AN ERROR, JUST A MESSAGE FOR YOUR INFORMATION ***
Do you really need Crypt::SSLeay?
Starting with version 6.02 of LWP, https support was unbundled into
LWP::Protocol::https. This module specifies as one of its prerequisites
IO::Socket::SSL which is automatically used by LWP::UserAgent unless
this preference is overridden separately. IO::Socket::SSL is a more
complete implementation, and, crucially, it allows hostname
verification. Crypt::SSLeay does not support this. At this point,
Crypt::SSLeay is maintained to support existing software that already
depends on it.
However, it is possible that your software does not really depend on
Crypt::SSLeay, only on the ability of LWP::UserAgent class to
communicate with sites over SSL/TLS.
If are using version LWP 6.02 or later, and therefore have installed
LWP::Protocol::https and its dependencies, and do not explicitly use
Net::SSL before loading LWP::UserAgent, or override the default socket
class, you are probably using IO::Socket::SSL and do not really need
Crypt::SSLeay.
Before installing Crypt::SSLeay, you may want to try specifying a
dependency on LWP::Protocol::https.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
support/testing/tests/package/test_gst1_python.py:29:1: W391 blank line at end of file
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
support/testing/tests/package/sample_python_gobject.py:5:1: E302 expected 2 blank lines, found 1
support/testing/tests/package/sample_python_gobject.py:8:7: E111 indentation is not a multiple of four
support/testing/tests/package/sample_python_gobject.py:11:1: E305 expected 2 blank lines after class or function definition, found 1
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following flake8 warnings:
support/testing/tests/package/sample_gst1_python.py:5:1: F401 'time' imported but unused
support/testing/tests/package/sample_gst1_python.py:7:1: E402 module level import not at top of file
support/testing/tests/package/sample_gst1_python.py:21:12: W292 no newline at end of file
For the E402 warning, we add a "noqa" marker, as we really want the
gi.require_version() to be before.
There is still one remaining warning to be fixed:
support/testing/tests/package/sample_gst1_python.py:18:28: F821 undefined name 'on_message'
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
flake8 complains with:
support/scripts/pkg-stats:339:13: E722 do not use bare 'except'
Due to the construct:
try:
something
except:
print("some message")
raise
Which is in fact OK because the exception is re-raised. This issue is
discussed at https://github.com/PyCQA/pycodestyle/issues/703, and the
general agreement is that these "bare except" are OK, and should be
ignored from flake8 using a noqa statement.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
flake8 complains with:
pkg-stats:38:1: E402 module level import not at top of file
This is due to sys.path.append() being before the import from
getdeveloperlib, but we really need this sys.path.append() to be
before, so let's ignore this flake8 warning.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, we build a complete AArch64 system, including a kernel. This
can take quite some time.
Switch to an armv7 system, which allows us to use one a prebuilt kernel,
thus significantly reducing the test time.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr:
- use a standalone config; don't inherit from TestPythonPackageBase
- use the default external toolchain (ARM, not Linaro)
- rewrite commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This test case runs a simple pipeline for 100 frames to ensure that
gst1-python works properly.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit updates all our toolchain configuration fragments for
pre-built Buildroot toolchains to use toolchains built with Buildroot
2020.02.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The C program inside check-kernel-headers.sh has two checking mode: a
strict and a loose one.
In strict mode, we want the kernel headers version declared by the
user to match exactly the one of the toolchain.
In loose mode, we want the kernel headers version of the toolchain to
be greater than or equal to the one declared by the user: this is used
when we have a toolchain that has newer headers than the latest
version known by Buildroot.
However, in loose mode, we continue to show the "Incorrect kernel
headers version" message, even though we then return a zero error
code. This is very confusing: you see an error displayed on the
terminal, but the build goes on.
We fix that by first doing the loose check first, and returning 0 if
it succeeds. And then we move on with the strict check where we want
the version to be identical.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This file was created by utils/scancpan while adding other packages but
apparently not yet added in the repo.
Assign this test case to Bernd in the DEVELOPERS file since he is
listed as the maintainer for this package.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added via utils/scancpan, adding a host dependency to perl-try-tiny and
target dependency to openssl.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Dependency for perl-crypt-ssleay (added in subsequent commit).
Added via utils/scancpan, without changes.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Other changes:
- Convert the package to a meson package.
- Remove 0001-add-PYTHON_INCLUDES-override.patch as it no longer applies.
- Add gobject-introspection as a dependency.
- Add the package under myself in the DEVELOPERS file.
Because gobject-introspection is now a dependency of python-gobject, the test
must be updated at the same time.
- Change TestPythonPy2Gobject to TestPythonPy3Gobject as
gobject-introspection requires python3.
- Refactor test_python_gobject.py to no longer inherit the
TestPythonPackageBase class, as this class uses a base config that does not
support gobject-introspection.
- Update sample_python_gobject to use Glib to find the path of sh.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Two simple tests to ensure that openrc boots without any services crashing
with a read only and a read write filing system.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Carlos Santos <unixmania@gmail.com>
[yann.morin.1998@free.fr: really check the init process]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
