Starting from version 2021.10 only distro booting is supported, as
reported by commit ff8f277e9121 ("ti: am335x_evm: Switch to DISTRO_BOOT only").
The patch allows to update U-Boot to versions later than 2021.10.
Tested on beaglebone black.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The previous version failed to boot from sd card with a log reported by
the document [1]. In my case it always failed, a 100% failure against
75% reported by the document.
Instead of adding the patch to fix the problem, I preferred to update
the kernel version.
Tested on beaglebone black.
[1] https://forum.beagleboard.org/t/5-10-x-beaglebone-black-fails-to-boot-from-sd-card/33297
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds support for the BeagleBone Green Wireless to the
existing beaglebone_defconfig, by making sure the relevant Device Tree
is built and installed.
Signed-off-by: Ramon Crichlow <rcrichlow9000@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Beaglebone Black Wireless needs a specific DT, which u-boot tries to
load based on the board name. Make sure we ship the DT so that we can
boot on that platform.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- Bump kernel to version 5.10.30-ti-r3.
- Bump U-Boot to version 2021.04.
Add mdev to the beaglebone_defconfig. This gives us automatic USB support,
as the omap2plus kernel has most drivers as modules.
While at it, enable VFPv3 with 32 registers (instead of 16) and add a few
comments to the defconfig.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes:
514 scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory
515 #include <openssl/bio.h>
Seen at:
https://gitlab.com/buildroot.org/buildroot/-/jobs/378314247
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use the github macro instead of git, to save download time.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The original source URL (http://beagleboard.org/source) now redirects to
https://elinux.org/Beagleboard:BeagleBoneBlack_Rebuilding_Software_Image
which points to an official kernel repository at GitHub.
There are updated RT and non-RT kernel source trees. Use the last non-RT
release (4.19.73-ti-r29) and the omap2plus defconfig.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use support/scripts/genimage.sh, instead, which prevents duplicating
TARGET_DIR under ${BUILD_DIR}/genimage.tmp/root.
Use a post-build script to copy uEnv.txt to BINARIES_DIR, as made for
beagleboneai.
Keep the post-image script because it is still used by beaglebone_qt5.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Switch to Linux kernel version 4.19.38 from the TI SDK 06.00.00.07
(TI SDK release date: 7.8.2019)
Added beaglebone blue
Updated uboot to version 2019.07
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
OMAP kernels use 8250 driver by default. Hence the name of
the console device is not /dev/ttyO0 but /dev/ttyS0.
Use /dev/console in order to handle the console independently
of the selected driver.
Tested in BeagleBone Black board.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Following ffbe46a529 ("linux: simplify
LINUX_BUILD_CMDS"), the Linux kernel build for beaglebone_defconfig
builds more things, including some .itb files, which require mkimage
with FIT support.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/199339433
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Switch to Linux kernel version 4.14.40 from the TI SDK 05.00.00.15 (TI
SDK release date: 26.07.2018).
Bump u-boot version to 2018.07.
Tested on Beaglebone Black and Beaglebone White
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Switch to Linux kernel version 4.9.59 from the TI SDK 04.02.00.09
(TI SDK release date: 23.12.2017)
Updated uboot to version 2018.01
uEnv.txt corrected to boot from sd card on the ti-am335x-evm
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Switch to Linux kernel version 4.4.41 from the TI SDK 03.03.00.04
(TI SDK release date: 29.03.2017)
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to Linux kernel version 4.4.32 from the TI SDK 03.02.00.05
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Select ext4 as root file system as the genimage config expects ext4 not ext2.
Tested on beaglebone, beagleboneblack and AM335x EVM
[Peter: reworded slightly]
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch updates the target config for the beaglebone based on the
AM335x CPU. It also supports the beagleboneblack, the TI evm and evmsk.
Device tree blobs for am335x-evm, am335x-evmsk, am335x-bone,
am335x-boneblack will be built and a sd card image is created with a
post-image script. The kernel and driver versions match the
ti-processor-sdk 02.00.00.00. Patches allow the use of old AM335x evm
revisions (1 bit sd card) and JTAG debugging.
Kernel JTAG patch: By default the kernel will disable the JTAG clock,
access via the JTAG port will not work after the kernel booted. The
AM335x-evm has a JTAG header fitted, this patch keeps the JTAG clock
alive.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
[Thomas: remove 1-bit MMC patch, it's causing a significant performance
regression for users of BeagleBone, which are 99.99% of the users of
this defconfig.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently selected version of U-Boot fails to compile.
Dying words are:
gcc -g -O2 -I/home/zeta/buildroot/buildroot/output/host/usr/include -c -o env_embedded.o /home/zeta/buildroot/buildroot/output/build/uboot-2013.10/common/env_embedded.c
/home/zeta/buildroot/buildroot/output/build/uboot-2013.10/lib/crc32.c:14:20: fatal error: common.h: No such file or directory
compilation terminated.
Makefile:258: recipe for target 'crc32.o' failed
Since it's quite old, instead of trying to fix it, let's
just upgrade.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
[Thomas: added host dosfstools to the defconfig, needed to build a SD
card image with genimage when a FAT partition is listed in the
genimage configuration.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
They're not necessary and look bad.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 7f1f9185e (system: default to devtmpfs for /dev) changed our default
for /dev handling, but didn't remove the explicit selection of devtmpfs from
a number of defconfigs.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since quite some time, the kernel and bootloader communities consider
zImage as the default format for kernel images on ARM, replacing
uImage. The load address information in uImage is no longer needed,
since the kernel is position-independent in terms of physical address,
except on a few old platforms. For most people, using zImage is simply
better/simpler, so let's switch to zImage as the default image format
on ARM.
All defconfigs are updated: 46 defconfigs no longer need to select
explicitly zImage because it's the default, and 16 defconfigs now need
to explicitly select uImage because that's no longer the default.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Matt Weber <matt@thewebers.ws>
Acked-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For most defconfigs, it was trivial to deduce the kernel version, by
just reading the version string, which could be:
- a standard upstream version string vX.Y.Z
- a non-standard version string, but still containg the standard X.Y.Z
Those for which it was not so trivial were those hosted on git tree.
Since most were already using a custom linux-headers version, it could
be easily deduced from that. It was confirmed by browsing said git trees
and check the version there.
There are a few cases were there was a mismatch:
- microzed: uses a 3.18 kernel, but 3.8 headers; fixed.
- xilinx_zc706: uses a 3.14 kernel, but 3.8 headers; fixed.
- zedboard: uses a 3.18 kernel, but 3.8 headers; fixed.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Added short readme file with description of first steps how to start.
- Added uEnv.txt so the board can start from SDCard
- Added post-image.sh script to copy included uEnv.txt to output/images
[Peter: strip trailing spaces]
Signed-off-by: Marcin Jabrzyk <marcin.jabrzyk@gmail.com>
Tested-by: Stephan Hoffmann <sho@relinux.de>
Tested-by: Marcin Jabrzyk <marcin.jabrzyk@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Make ti-gfx working on BeagleBone Black by adding an ugly necessary
patch to the kernel wich fix:
pvrsrvkm: Unknown symbol v7_dma_map_area
pvrsrvkm: Unknown symbol v7_dma_flush_range
Add drivers to the default kernel config used in beaglebone_defconfig
to enable the framebuffer.
Signed-off-by: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit 2a5cf5e (check kernel headers version), we also need to
specify the series of the custom kernel headers version.
The defconfigs file that define such a custom kernel headers version
now fail to build.
Add the required _AT_LEAST_X_Y options to those config files. Done with
this (convoluted but very fast, uch faster ythan manual editing!) rule:
for f in $( git grep -l BR2_DEFAULT_KERNEL_VERSION=\"3 ); do
grep -E '^BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_' "${f}" >/dev/null && continue
sed -r -e '/^(BR2_DEFAULT_KERNEL_VERSION="3\.([[:digit:]]+).*")$/s//\1\nBR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_\2=y/' "${f}"
done
Only kernels >= 3.0 need those options in the defconfig, since the
default for 2.6.x kernels is correct (selects _AT_LEAST_2_6), and
the default is not saved in a defconfig.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The devicetree data for BeagleBone Black is the am335x–boneblack.dts file
(includes "am33xx.dtsi" and "am335x-bone-common.dtsi")
BeagleBone White uses the am335x-bone.dts file.
Signed-off-by: Marcelo Gutiérrez <kuyurix@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The default U-Boot configuration is now to use a zImage instead of uImage.
Signed-off-by: Anders Darander <anders@chargestorm.se>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update to the default version of U-Boot, at this time 2013.10.
Tested with an old uEnv.txt (i.e. using uImage) and with the
currently prefered zImage.
Signed-off-by: Anders Darander <anders@chargestorm.se>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Git repo version is taken from meta-ti.
It's a 3.12.10 kernel with TI's own patches on top.
The defconfig has been kept rather close to our old defconfig.
The kernel has been boot-tested using an NFS-root.
Apart from the kernel change, the linux headers has also been
updated from 3.8.12 to 3.12.10.
[Peter: drop UEVENT_HELPER_PATH setting]
Signed-off-by: Anders Darander <anders@chargestorm.se>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: also update cubieboard2, freescale_imx6* and wandboard]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the FW needed for the Cortex M3 on the beaglebone. This is required
for working power management.
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As the beaglebone support is mainlined, there's no support for the old
board setup files, and the only supported run-time configuration is through
the device tree.
We're also setting the kernel headers to follow the 3.8 series.
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This configuration provides a basic setup for using Buildroot
to create all of the images needed for a BeagleBone.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
